From: Dan Murphy <dmurphy@ti.com>
To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <robh+dt@kernel.org>, <linux-leds@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH v5 2/9] documention: leds: Add multicolor class documentation
Date: Wed, 11 Sep 2019 13:01:08 -0500 [thread overview]
Message-ID: <20190911180115.21035-3-dmurphy@ti.com> (raw)
In-Reply-To: <20190911180115.21035-1-dmurphy@ti.com>
Add the support documentation on the multicolor LED framework.
This document defines the directores and file generated by the
multicolor framework. It also documents usage.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
Documentation/leds/index.rst | 1 +
Documentation/leds/leds-class-multicolor.rst | 149 +++++++++++++++++++
2 files changed, 150 insertions(+)
create mode 100644 Documentation/leds/leds-class-multicolor.rst
diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
index 060f4e485897..bc70c6aa7138 100644
--- a/Documentation/leds/index.rst
+++ b/Documentation/leds/index.rst
@@ -9,6 +9,7 @@ LEDs
leds-class
leds-class-flash
+ leds-class-multicolor
ledtrig-oneshot
ledtrig-transient
ledtrig-usbport
diff --git a/Documentation/leds/leds-class-multicolor.rst b/Documentation/leds/leds-class-multicolor.rst
new file mode 100644
index 000000000000..0b40c85f417a
--- /dev/null
+++ b/Documentation/leds/leds-class-multicolor.rst
@@ -0,0 +1,149 @@
+====================================
+Multi Color LED handling under Linux
+====================================
+
+Description
+===========
+There are varying monochrome LED colors available for application. These
+LEDs can be used as a single use case LED or can be mixed with other color
+LEDs to produce the full spectrum of color. Color LEDs that are grouped
+can be presented under a single LED node with individual color control.
+The multicolor class groups these LEDs and allows dynamically setting the value
+of a single LED or setting the intensity values of the LEDs in the group and
+updating the LEDs virtually simultaneously.
+
+Multicolor Class Control
+========================
+The multicolor class presents the LED groups under a directory called "colors".
+This directory is a child under the LED parent node created by the led_class
+framework. The led_class framework is documented in led-class.rst within this
+documentation directory.
+
+Each colored LED is given its own directory. These directories will be one of
+LED_COLOR_ID_* definitions from the header include/dt-bindings/leds/common.h.
+Under these directories the intensity and max_intensity files are presented for
+each LED.
+
+Directory Layout Example
+========================
+root:/sys/class/leds/rgb:grouped_leds# ls -lR colors/
+colors/:
+drwxr-xr-x 2 root root 0 Jun 28 20:21 blue
+drwxr-xr-x 2 root root 0 Jun 28 20:21 green
+drwxr-xr-x 2 root root 0 Jun 28 20:21 red
+-rw------- 1 root root 4096 Jun 28 20:21 color_mix
+
+colors/blue:
+-rw------- 1 root root 4096 Jun 28 20:21 intensity
+-r-------- 1 root root 4096 Jun 28 20:27 max_intensity
+-r-------- 1 root root 4096 Jun 28 20:21 color_id
+
+colors/green:
+-rw------- 1 root root 4096 Jun 28 20:22 intensity
+-r-------- 1 root root 4096 Jun 28 20:27 max_intensity
+-r-------- 1 root root 4096 Jun 28 20:21 color_id
+
+colors/red:
+-rw------- 1 root root 4096 Jun 28 20:21 intensity
+-r-------- 1 root root 4096 Jun 28 20:27 max_intensity
+-r-------- 1 root root 4096 Jun 28 20:21 color_id
+
+Multicolor Color Mixing
+=======================
+Multicolor monochrome LEDs intensity can be modified and mixed to produce a
+varying array of colors. The color_mix file gives the user the ability to write
+all the monochrome LEDs registered in the directory with a single call.
+To create a specific color from monochrome LEDs the color_mix file needs to be
+written with each color's intensity. The order in which the monochrome LEDs
+should be written is based on the colors color_id. The LEDs brightness will be
+updated on the next call to the parent brightness file.
+
+For example:
+cat /sys/class/leds/rgb:grouped_leds/red/color_id
+0
+cat /sys/class/leds/rgb:grouped_leds/green/color_id
+1
+cat /sys/class/leds/rgb:grouped_leds/blue/color_id
+2
+
+red - color_id = 0
+green - color_id = 1
+blue - color_id = 2
+
+These id's are the order in which to write the color_mix file.
+
+echo "<red> <green> <blue>" > color_mix
+
+echo "80 00 80" > color_mix
+
+The order of the monochrome LEDs are determined during multicolor class
+registration and will not change unless unregistered and re-registered.
+
+Other example with amber monochrome LED:
+blue - color_id = 0
+amber - color_id = 1
+
+In this example blue is at ID 0 and amber ID is 1 so the user would write
+echo "<blue> <amber>" > color_mix
+
+echo "38 80" > color_mix
+
+If a single monochrome LED needs to be modified then the user would write the
+colors/<color>/intensity file.
+
+
+Multicolor Class Brightness Control
+===================================
+The multiclor class framework will calculate each monochrome LEDs intensity.
+
+The brightness level for each LED is calculated based on the color LED
+intensity setting divided by the color LED max intensity setting multiplied by
+the requested value.
+
+led_brightness = requested_value * led_color_intensity/led_color_max_intensity
+
+Example:
+Three LEDs are present in the group as defined in "Directory Layout Example"
+within this document.
+
+A user first writes the color LED brightness file with the brightness level that
+is necessary to achieve a blueish violet output from the RGB LED group.
+
+echo 138 > /sys/class/leds/rgb:grouped_leds/red/intensity
+echo 43 > /sys/class/leds/rgb:grouped_leds/green/intensity
+echo 226 > /sys/class/leds/rgb:grouped_leds/blue/intensity
+
+red -
+ intensity = 138
+ max_intensity = 255
+green -
+ intensity = 43
+ max_intensity = 255
+blue -
+ intensity = 226
+ max_intensity = 255
+
+The user can control the brightness of that RGB group by writing the parent
+'brightness' control. Assuming a parent max_brightness of 255 the user may want
+to dim the LED color group to half. The user would write a value of 128 to the
+parent brightness file then the values written to each LED will be adjusted
+base on this value
+
+cat /sys/class/leds/rgb:grouped_leds/max_brightness
+255
+echo 128 > /sys/class/leds/rgb:grouped_leds/brightness
+
+adjusted_red_value = 128 * 138/255 = 69
+adjusted_green_value = 128 * 43/255 = 21
+adjusted_blue_value = 128 * 226/255 = 113
+
+Reading the parent brightness file will return the current brightness value of
+the color LED group.
+
+cat /sys/class/leds/rgb:grouped_leds/max_brightness
+255
+
+echo 128 > /sys/class/leds/rgb:grouped_leds/brightness
+
+cat /sys/class/leds/rgb:grouped_leds/max_brightness
+128
--
2.22.0.214.g8dca754b1e
next prev parent reply other threads:[~2019-09-11 18:01 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-11 18:01 [PATCH v5 0/9] Multicolor FW update Dan Murphy
2019-09-11 18:01 ` [PATCH v5 1/9] leds: multicolor: Add sysfs interface definition Dan Murphy
2019-09-15 13:57 ` Jacek Anaszewski
2019-09-16 13:56 ` Dan Murphy
2019-09-16 18:31 ` Jacek Anaszewski
2019-09-11 18:01 ` Dan Murphy [this message]
2019-09-12 20:55 ` [PATCH v5 2/9] documention: leds: Add multicolor class documentation Pavel Machek
2019-09-13 2:09 ` Dan Murphy
2019-09-15 12:45 ` Jacek Anaszewski
2019-09-11 18:01 ` [PATCH v5 3/9] dt: bindings: Add multicolor class dt bindings documention Dan Murphy
2019-09-15 14:01 ` Jacek Anaszewski
2019-09-16 13:58 ` Dan Murphy
2019-09-11 18:01 ` [PATCH v5 4/9] dt-bindings: leds: Add multicolor ID to the color ID list Dan Murphy
2019-09-11 18:01 ` [PATCH v5 5/9] " Dan Murphy
2019-09-11 18:01 ` [PATCH v5 6/9] leds: multicolor: Introduce a multicolor class definition Dan Murphy
2019-09-15 16:20 ` Jacek Anaszewski
2019-09-16 14:04 ` Dan Murphy
2019-09-16 18:34 ` Dan Murphy
2019-09-16 20:18 ` Jacek Anaszewski
2019-09-11 18:01 ` [PATCH v5 7/9] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
2019-09-11 18:01 ` [PATCH v5 8/9] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
2019-09-11 18:01 ` [PATCH v5 9/9] leds: Update the lp55xx to use the multi color framework Dan Murphy
2019-09-15 16:28 ` Jacek Anaszewski
2019-09-16 14:03 ` Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190911180115.21035-3-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=jacek.anaszewski@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).