From: Alexandru Ardelean <alexandru.ardelean@analog.com>
To: <linux-iio@vger.kernel.org>, <linux-spi@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <jic23@kernel.org>, <broonie@kernel.org>,
Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: [PATCH v2 4/4] iio: imu: adis: convert cs_change_delay to spi_delay struct
Date: Fri, 13 Sep 2019 14:55:49 +0300 [thread overview]
Message-ID: <20190913115549.3823-5-alexandru.ardelean@analog.com> (raw)
In-Reply-To: <20190913115549.3823-1-alexandru.ardelean@analog.com>
The ADIS library is one of the few users of the new `cs_change_delay`
parameter for an spi_transfer.
The introduction of the `spi_delay` struct, requires that the users of of
`cs_change_delay` get an update. This change updates the ADIS library.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/imu/adis.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index 1631c255deab..2cd2cc2316c6 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -39,24 +39,24 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 2,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 4,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 6,
.bits_per_word = 8,
@@ -139,16 +139,16 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->write_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 2,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->read_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.tx_buf = adis->tx + 4,
.rx_buf = adis->rx,
@@ -156,8 +156,8 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
.len = 2,
.cs_change = 1,
.delay_usecs = adis->data->read_delay,
- .cs_change_delay = adis->data->cs_change_delay,
- .cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
+ .cs_change_delay.value = adis->data->cs_change_delay,
+ .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
}, {
.rx_buf = adis->rx + 2,
.bits_per_word = 8,
--
2.20.1
next prev parent reply other threads:[~2019-09-13 8:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-13 11:55 [PATCH v2 0/4] spi: introduce `struct spi_delay` data-type Alexandru Ardelean
2019-09-13 11:55 ` [PATCH v2 1/4] spi: move `cs_change_delay` backwards compat logic outside switch Alexandru Ardelean
2019-09-13 11:55 ` [PATCH v2 2/4] spi: introduce spi_delay struct as "value + unit" & spi_delay_exec() Alexandru Ardelean
2019-09-13 11:55 ` [PATCH v2 3/4] spi: make `cs_change_delay` the first user of the `spi_delay` logic Alexandru Ardelean
2019-09-13 11:55 ` Alexandru Ardelean [this message]
2019-09-15 10:14 ` [PATCH v2 4/4] iio: imu: adis: convert cs_change_delay to spi_delay struct Jonathan Cameron
2019-09-16 6:58 ` Ardelean, Alexandru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190913115549.3823-5-alexandru.ardelean@analog.com \
--to=alexandru.ardelean@analog.com \
--cc=broonie@kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).