Re: [PATCH v2] net: mdio: switch to using gpiod_get_optional()

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Fri, Sep 13, 2019 at 03:55:47PM -0700, Dmitry Torokhov wrote:
> The MDIO device reset line is optional and now that gpiod_get_optional()
> returns proper value when GPIO support is compiled out, there is no
> reason to use fwnode_get_named_gpiod() that I plan to hide away.
> 
> Let's switch to using more standard gpiod_get_optional() and
> gpiod_set_consumer_name() to keep the nice "PHY reset" label.
> 
> Also there is no reason to only try to fetch the reset GPIO when we have
> OF node, gpiolib can fetch GPIO data from firmwares as well.
> 

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

But see comment below.

> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> 
> Note this is an update to a patch titled "[PATCH 05/11] net: mdio:
> switch to using fwnode_gpiod_get_index()" that no longer uses the new
> proposed API and instead works with already existing ones.
> 
>  drivers/net/phy/mdio_bus.c | 22 +++++++++-------------
>  1 file changed, 9 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
> index ce940871331e..2e29ab841b4d 100644
> --- a/drivers/net/phy/mdio_bus.c
> +++ b/drivers/net/phy/mdio_bus.c
> @@ -42,21 +42,17 @@
>  
>  static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
>  {
> -	struct gpio_desc *gpiod = NULL;
> +	int error;
>  
>  	/* Deassert the optional reset signal */
> -	if (mdiodev->dev.of_node)
> -		gpiod = fwnode_get_named_gpiod(&mdiodev->dev.of_node->fwnode,
> -					       "reset-gpios", 0, GPIOD_OUT_LOW,
> -					       "PHY reset");
> -	if (IS_ERR(gpiod)) {
> -		if (PTR_ERR(gpiod) == -ENOENT || PTR_ERR(gpiod) == -ENOSYS)
> -			gpiod = NULL;
> -		else
> -			return PTR_ERR(gpiod);
> -	}
> -
> -	mdiodev->reset_gpio = gpiod;
> +	mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev,
> +						 "reset", GPIOD_OUT_LOW);
> +	error = PTR_ERR_OR_ZERO(mdiodev->reset_gpio);
> +	if (error)
> +		return error;
> +

> +	if (mdiodev->reset_gpio)

This is redundant check.

> +		gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset");

>  	return 0;
>  }
> -- 
> 2.23.0.237.gc6a4ce50a0-goog
> 
> 
> -- 
> Dmitry

-- 
With Best Regards,
Andy Shevchenko