From: Ludovic Desroches <ludovic.desroches@microchip.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
<linux-gpio@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] pinctrl: at91-pio4: implement .get_multiple and .set_multiple
Date: Sat, 14 Sep 2019 21:36:40 +0200 [thread overview]
Message-ID: <20190914193640.rukypixp6t54fwfc@sekiro> (raw)
In-Reply-To: <20190905141304.22005-1-alexandre.belloni@bootlin.com>
On Thu, Sep 05, 2019 at 04:13:04PM +0200, Alexandre Belloni wrote:
>
> Implement .get_multiple and .set_multiple to allow reading or setting
> multiple pins simultaneously. Pins in the same bank will all be switched at
> the same time, improving synchronization and performances.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Thanks for this improvement. You can keep my ack for v3 as the changes
should be the commit message only. I'll be off for three weeks.
Regards
Ludovic
> ---
> drivers/pinctrl/pinctrl-at91-pio4.c | 60 +++++++++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
> diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
> index d6de4d360cd4..488a302a60d4 100644
> --- a/drivers/pinctrl/pinctrl-at91-pio4.c
> +++ b/drivers/pinctrl/pinctrl-at91-pio4.c
> @@ -328,6 +328,35 @@ static int atmel_gpio_get(struct gpio_chip *chip, unsigned offset)
> return !!(reg & BIT(pin->line));
> }
>
> +static int atmel_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
> + unsigned long *bits)
> +{
> + struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
> + unsigned int bank;
> +
> + bitmap_zero(bits, atmel_pioctrl->npins);
> +
> + for (bank = 0; bank < atmel_pioctrl->nbanks; bank++) {
> + unsigned int word = bank;
> + unsigned int offset = 0;
> + unsigned int reg;
> +
> +#if ATMEL_PIO_NPINS_PER_BANK != BITS_PER_LONG
> + word = BIT_WORD(bank * ATMEL_PIO_NPINS_PER_BANK);
> + offset = bank * ATMEL_PIO_NPINS_PER_BANK % BITS_PER_LONG;
> +#endif
> + if (!mask[word])
> + continue;
> +
> + reg = atmel_gpio_read(atmel_pioctrl, bank, ATMEL_PIO_PDSR);
> + bits[word] |= mask[word] & (reg << offset);
> +
> + pr_err("ABE: %d %08x\n", bank, bits[word]);
> + }
> +
> + return 0;
> +}
> +
> static int atmel_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
> int value)
> {
> @@ -358,11 +387,42 @@ static void atmel_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
> BIT(pin->line));
> }
>
> +static void atmel_gpio_set_multiple(struct gpio_chip *chip, unsigned long *mask,
> + unsigned long *bits)
> +{
> + struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
> + unsigned int bank;
> +
> + for (bank = 0; bank < atmel_pioctrl->nbanks; bank++) {
> + unsigned int bitmask;
> + unsigned int word = bank;
> +
> +#if ATMEL_PIO_NPINS_PER_BANK != BITS_PER_LONG
> + word = BIT_WORD(bank * ATMEL_PIO_NPINS_PER_BANK);
> +#endif
> + if (!mask[word])
> + continue;
> +
> + bitmask = mask[word] & bits[word];
> + atmel_gpio_write(atmel_pioctrl, bank, ATMEL_PIO_SODR, bitmask);
> +
> + bitmask = mask[word] & ~bits[word];
> + atmel_gpio_write(atmel_pioctrl, bank, ATMEL_PIO_CODR, bitmask);
> +
> +#if ATMEL_PIO_NPINS_PER_BANK != BITS_PER_LONG
> + mask[word] >>= ATMEL_PIO_NPINS_PER_BANK;
> + bits[word] >>= ATMEL_PIO_NPINS_PER_BANK;
> +#endif
> + }
> +}
> +
> static struct gpio_chip atmel_gpio_chip = {
> .direction_input = atmel_gpio_direction_input,
> .get = atmel_gpio_get,
> + .get_multiple = atmel_gpio_get_multiple,
> .direction_output = atmel_gpio_direction_output,
> .set = atmel_gpio_set,
> + .set_multiple = atmel_gpio_set_multiple,
> .to_irq = atmel_gpio_to_irq,
> .base = 0,
> };
> --
> 2.21.0
>
>
prev parent reply other threads:[~2019-09-14 19:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-05 14:13 [PATCH] pinctrl: at91-pio4: implement .get_multiple and .set_multiple Alexandre Belloni
2019-09-05 14:33 ` Claudiu.Beznea
2019-09-11 0:27 ` Linus Walleij
2019-09-11 9:11 ` Alexandre Belloni
2019-09-12 13:46 ` Linus Walleij
2019-09-14 19:36 ` Ludovic Desroches [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190914193640.rukypixp6t54fwfc@sekiro \
--to=ludovic.desroches@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).