From: Krzysztof Wilczynski <kw@linux.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] PCI: Move ATS declarations to linux/pci-ats.h
Date: Sat, 14 Sep 2019 23:30:32 +0200 [thread overview]
Message-ID: <20190914213032.22314-1-kw@linux.com> (raw)
Move ATS function prototypes from include/linux/pci.h
to include/linux/pci-ats.h as the ATS, PRI, and PASID
interfaces are related, and are used only by the IOMMU
drivers. This effecively reverts the change done in
commit ff9bee895c4d ("PCI: Move ATS declarations to
linux/pci.h so they're all together").
Also, remove surplus forward declaration of struct pci_ats
from include/linux/pci.h, as it is no longer needed, since
the struct pci_ats has been embedded directly into struct
pci_dev in the commit d544d75ac96a ("PCI: Embed ATS info
directly into struct pci_dev").
No functional changes intended.
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
---
Related:
https://lore.kernel.org/r/20190902211100.GH7013@google.com
https://lore.kernel.org/r/20190724233848.73327-9-skunberg.kelsey@gmail.com
include/linux/pci-ats.h | 76 +++++++++++++++--------------------------
include/linux/pci.h | 14 --------
2 files changed, 28 insertions(+), 62 deletions(-)
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
index 1ebb88e7c184..a2001673d445 100644
--- a/include/linux/pci-ats.h
+++ b/include/linux/pci-ats.h
@@ -4,74 +4,54 @@
#include <linux/pci.h>
-#ifdef CONFIG_PCI_PRI
+#ifdef CONFIG_PCI_ATS
+/* Address Translation Service */
+int pci_enable_ats(struct pci_dev *dev, int ps);
+void pci_disable_ats(struct pci_dev *dev);
+int pci_ats_queue_depth(struct pci_dev *dev);
+int pci_ats_page_aligned(struct pci_dev *dev);
+#else /* CONFIG_PCI_ATS */
+static inline int pci_enable_ats(struct pci_dev *d, int ps)
+{ return -ENODEV; }
+static inline void pci_disable_ats(struct pci_dev *d) { }
+static inline int pci_ats_queue_depth(struct pci_dev *d)
+{ return -ENODEV; }
+static inline int pci_ats_page_aligned(struct pci_dev *dev)
+{ return 0; }
+#endif /* CONFIG_PCI_ATS */
+#ifdef CONFIG_PCI_PRI
int pci_enable_pri(struct pci_dev *pdev, u32 reqs);
void pci_disable_pri(struct pci_dev *pdev);
void pci_restore_pri_state(struct pci_dev *pdev);
int pci_reset_pri(struct pci_dev *pdev);
-
#else /* CONFIG_PCI_PRI */
-
static inline int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
-{
- return -ENODEV;
-}
-
-static inline void pci_disable_pri(struct pci_dev *pdev)
-{
-}
-
-static inline void pci_restore_pri_state(struct pci_dev *pdev)
-{
-}
-
+{ return -ENODEV; }
+static inline void pci_disable_pri(struct pci_dev *pdev) { }
+static inline void pci_restore_pri_state(struct pci_dev *pdev) { }
static inline int pci_reset_pri(struct pci_dev *pdev)
-{
- return -ENODEV;
-}
-
+{ return -ENODEV; }
#endif /* CONFIG_PCI_PRI */
#ifdef CONFIG_PCI_PASID
-
int pci_enable_pasid(struct pci_dev *pdev, int features);
void pci_disable_pasid(struct pci_dev *pdev);
void pci_restore_pasid_state(struct pci_dev *pdev);
int pci_pasid_features(struct pci_dev *pdev);
int pci_max_pasids(struct pci_dev *pdev);
int pci_prg_resp_pasid_required(struct pci_dev *pdev);
-
-#else /* CONFIG_PCI_PASID */
-
+#else /* CONFIG_PCI_PASID */
static inline int pci_enable_pasid(struct pci_dev *pdev, int features)
-{
- return -EINVAL;
-}
-
-static inline void pci_disable_pasid(struct pci_dev *pdev)
-{
-}
-
-static inline void pci_restore_pasid_state(struct pci_dev *pdev)
-{
-}
-
+{ return -EINVAL; }
+static inline void pci_disable_pasid(struct pci_dev *pdev) { }
+static inline void pci_restore_pasid_state(struct pci_dev *pdev) { }
static inline int pci_pasid_features(struct pci_dev *pdev)
-{
- return -EINVAL;
-}
-
+{ return -EINVAL; }
static inline int pci_max_pasids(struct pci_dev *pdev)
-{
- return -EINVAL;
-}
-
+{ return -EINVAL; }
static inline int pci_prg_resp_pasid_required(struct pci_dev *pdev)
-{
- return 0;
-}
+{ return 0; }
#endif /* CONFIG_PCI_PASID */
-
-#endif /* LINUX_PCI_ATS_H*/
+#endif /* LINUX_PCI_ATS_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 56767f50ad96..5f2ae580bd19 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -284,7 +284,6 @@ struct irq_affinity;
struct pcie_link_state;
struct pci_vpd;
struct pci_sriov;
-struct pci_ats;
struct pci_p2pdma;
/* The pci_dev structure describes PCI devices */
@@ -1764,19 +1763,6 @@ static inline const struct pci_device_id *pci_match_id(const struct pci_device_i
static inline bool pci_ats_disabled(void) { return true; }
#endif /* CONFIG_PCI */
-#ifdef CONFIG_PCI_ATS
-/* Address Translation Service */
-int pci_enable_ats(struct pci_dev *dev, int ps);
-void pci_disable_ats(struct pci_dev *dev);
-int pci_ats_queue_depth(struct pci_dev *dev);
-int pci_ats_page_aligned(struct pci_dev *dev);
-#else
-static inline int pci_enable_ats(struct pci_dev *d, int ps) { return -ENODEV; }
-static inline void pci_disable_ats(struct pci_dev *d) { }
-static inline int pci_ats_queue_depth(struct pci_dev *d) { return -ENODEV; }
-static inline int pci_ats_page_aligned(struct pci_dev *dev) { return 0; }
-#endif
-
/* Include architecture-dependent settings and functions */
#include <asm/pci.h>
--
2.23.0
next reply other threads:[~2019-09-14 21:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-14 21:30 Krzysztof Wilczynski [this message]
2019-09-30 22:31 ` [PATCH] PCI: Move ATS declarations to linux/pci-ats.h Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190914213032.22314-1-kw@linux.com \
--to=kw@linux.com \
--cc=helgaas@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).