From: Heiko Stuebner <heiko@sntech.de>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
linux-rockchip@lists.infradead.org,
christoph.muellner@theobroma-systems.com,
Heiko Stuebner <heiko@sntech.de>
Subject: [PATCH 12/13] arm64: dts: rockchip: add usb2phy for px30
Date: Tue, 17 Sep 2019 10:26:58 +0200 [thread overview]
Message-ID: <20190917082659.25549-12-heiko@sntech.de> (raw)
In-Reply-To: <20190917082659.25549-1-heiko@sntech.de>
Add the usb2phy node on the px30 and hook it up to the usb controllers
it supplies.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 43 ++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 9ad1c2f04ea9..837e421cc30f 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -701,6 +701,43 @@
<26000000>;
};
+ usb2phy_grf: syscon@ff2c0000 {
+ compatible = "rockchip,px30-usb2phy-grf", "syscon",
+ "simple-mfd";
+ reg = <0x0 0xff2c0000 0x0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy: usb2-phy@100 {
+ compatible = "rockchip,px30-usb2phy";
+ reg = <0x100 0x20>;
+ clocks = <&pmucru SCLK_USBPHY_REF>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&cru USB480M>;
+ assigned-clock-parents = <&u2phy>;
+ clock-output-names = "usb480m_phy";
+ status = "disabled";
+
+ u2phy_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+
+ u2phy_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "otg-bvalid", "otg-id",
+ "linestate";
+ status = "disabled";
+ };
+ };
+ };
+
usb20_otg: usb@ff300000 {
compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
"snps,dwc2";
@@ -713,6 +750,8 @@
g-rx-fifo-size = <280>;
g-tx-fifo-size = <256 128 128 64 32 16>;
g-use-dma;
+ phys = <&u2phy_otg>;
+ phy-names = "usb2-phy";
power-domains = <&power PX30_PD_USB>;
status = "disabled";
};
@@ -723,6 +762,8 @@
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
clock-names = "usbhost";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
power-domains = <&power PX30_PD_USB>;
status = "disabled";
};
@@ -733,6 +774,8 @@
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
clock-names = "usbhost";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
power-domains = <&power PX30_PD_USB>;
status = "disabled";
};
--
2.20.1
next prev parent reply other threads:[~2019-09-17 8:48 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 8:26 [PATCH 01/13] arm64: dts: rockchip: fix iface clock-name on px30 iommus Heiko Stuebner
2019-09-17 8:26 ` [PATCH 02/13] arm64: dts: rockchip: remove static xin32k from px30 Heiko Stuebner
2019-09-17 8:26 ` [PATCH 03/13] arm64: dts: rockchip: remove px30 emmc_pwren pinctrl Heiko Stuebner
2019-09-17 8:26 ` [PATCH 04/13] arm64: dts: rockchip: add default px30 emmc pinctrl Heiko Stuebner
2019-09-17 8:26 ` [PATCH 05/13] arm64: dts: rockchip: fix the px30-evb power tree Heiko Stuebner
2019-09-17 8:26 ` [PATCH 06/13] arm64: dts: rockchip: add emmc-powersequence to px30-evb Heiko Stuebner
2019-09-17 8:26 ` [PATCH 07/13] arm64: dts: rockchip: move px30-evb console output to uart 5 Heiko Stuebner
2019-09-17 8:26 ` [PATCH 08/13] arm64: dts: rockchip: remove unused pin settings from px30 Heiko Stuebner
2019-09-17 8:26 ` [PATCH 09/13] arm64: dts: rockchip: document explicit px30 cru dependencies Heiko Stuebner
2019-09-30 22:58 ` Rob Herring
2019-09-17 8:26 ` [PATCH 10/13] arm64: dts: rockchip: add px30-evb i2c1 devices Heiko Stuebner
2019-09-17 8:26 ` [PATCH 11/13] dt-bindings: document PX30 usb2phy General Register Files Heiko Stuebner
2019-09-30 22:58 ` Rob Herring
2019-09-17 8:26 ` Heiko Stuebner [this message]
2019-09-17 8:26 ` [PATCH 13/13] arm64: dts: rockchip: enable usb2phy on px30-evb Heiko Stuebner
2019-10-03 21:25 ` [PATCH 01/13] arm64: dts: rockchip: fix iface clock-name on px30 iommus Heiko Stuebner
2019-10-31 14:15 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190917082659.25549-12-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=christoph.muellner@theobroma-systems.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).