[RFC][PATCH 0/5] dwc3: Changes for HiKey960 support

From: John Stultz <john.stultz@linaro.org>
To: lkml <linux-kernel@vger.kernel.org>
Cc: John Stultz <john.stultz@linaro.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Felipe Balbi <balbi@kernel.org>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Yu Chen <chenyu56@huawei.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org
Subject: [RFC][PATCH 0/5] dwc3: Changes for HiKey960 support
Date: Wed, 25 Sep 2019 23:42:19 +0000	[thread overview]
Message-ID: <20190925234224.95216-1-john.stultz@linaro.org> (raw)

I've been carrying for awhile some patches that Yu Chen was
previously pushing upstream to enable USB on the HiKey960 board
and I wanted to try to nudge them forward as I'm not sure as to
what his plans are.

I've reviewed some of the feedback from his last series, and
tried to clean things up a little bit. However, there are still
some dt binding bits between the misc switch driver and how it
interacts with the rt1711 and dwc3 driver that I'm unsure of.

However, there were some simpler parts of the patch set that I
wanted to send out to see if we could make some progress on
those parts while I continue to work on the more complex bits.

You can find the full set of changes to get USB working on the
board here:
 https://git.linaro.org/people/john.stultz/android-dev.git/log/?id=e2f983603b4d89c021929842142ca7c3370422cf 

This series is just the more trivial changes, along with some
missing binding documentation that I've added.

I'd greatly appreciate any review or feedback on this series!

thanks
-john

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org

John Stultz (2):
  dt-bindings: usb: dwc3: Add a property to do a CGTL soft reset on mode
    switching
  dt-bindings: usb: dwc3: of-simple: add compatible for HiSi

Yu Chen (3):
  usb: dwc3: Execute GCTL Core Soft Reset while switch mode for
    Hisilicon Kirin Soc
  usb: dwc3: Increase timeout for CmdAct cleared by device controller
  usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc
    Platform

 .../devicetree/bindings/usb/dwc3.txt          |  2 +
 .../devicetree/bindings/usb/hisi,dwc3.txt     | 52 +++++++++++++++++++
 drivers/usb/dwc3/core.c                       | 20 +++++++
 drivers/usb/dwc3/core.h                       |  3 ++
 drivers/usb/dwc3/dwc3-of-simple.c             |  4 +-
 drivers/usb/dwc3/gadget.c                     |  2 +-
 6 files changed, 81 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/hisi,dwc3.txt

-- 
2.17.1