linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>,
	Wolfram Sang <wsa@the-dreams.de>, Sasha Levin <sashal@kernel.org>,
	linux-i2c@vger.kernel.org
Subject: [PATCH AUTOSEL 5.2 05/42] i2c-cht-wc: Fix lockdep warning
Date: Sun, 29 Sep 2019 13:32:04 -0400	[thread overview]
Message-ID: <20190929173244.8918-5-sashal@kernel.org> (raw)
In-Reply-To: <20190929173244.8918-1-sashal@kernel.org>

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 232219b9a464c2479c98aa589acb1bd3383ae9d6 ]

When the kernel is build with lockdep support and the i2c-cht-wc driver is
used, the following warning is shown:

[   66.674334] ======================================================
[   66.674337] WARNING: possible circular locking dependency detected
[   66.674340] 5.3.0-rc4+ #83 Not tainted
[   66.674342] ------------------------------------------------------
[   66.674345] systemd-udevd/1232 is trying to acquire lock:
[   66.674349] 00000000a74dab07 (intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock){+.+.}, at: regmap_write+0x31/0x70
[   66.674360]
               but task is already holding lock:
[   66.674362] 00000000d44a85b7 (i2c_register_adapter){+.+.}, at: i2c_smbus_xfer+0x49/0xf0
[   66.674370]
               which lock already depends on the new lock.

[   66.674371]
               the existing dependency chain (in reverse order) is:
[   66.674374]
               -> #1 (i2c_register_adapter){+.+.}:
[   66.674381]        rt_mutex_lock_nested+0x46/0x60
[   66.674384]        i2c_smbus_xfer+0x49/0xf0
[   66.674387]        i2c_smbus_read_byte_data+0x45/0x70
[   66.674391]        cht_wc_byte_reg_read+0x35/0x50
[   66.674394]        _regmap_read+0x63/0x1a0
[   66.674396]        _regmap_update_bits+0xa8/0xe0
[   66.674399]        regmap_update_bits_base+0x63/0xa0
[   66.674403]        regmap_irq_update_bits.isra.0+0x3b/0x50
[   66.674406]        regmap_add_irq_chip+0x592/0x7a0
[   66.674409]        devm_regmap_add_irq_chip+0x89/0xed
[   66.674412]        cht_wc_probe+0x102/0x158
[   66.674415]        i2c_device_probe+0x95/0x250
[   66.674419]        really_probe+0xf3/0x380
[   66.674422]        driver_probe_device+0x59/0xd0
[   66.674425]        device_driver_attach+0x53/0x60
[   66.674428]        __driver_attach+0x92/0x150
[   66.674431]        bus_for_each_dev+0x7d/0xc0
[   66.674434]        bus_add_driver+0x14d/0x1f0
[   66.674437]        driver_register+0x6d/0xb0
[   66.674440]        i2c_register_driver+0x45/0x80
[   66.674445]        do_one_initcall+0x60/0x2f4
[   66.674450]        kernel_init_freeable+0x20d/0x2b4
[   66.674453]        kernel_init+0xa/0x10c
[   66.674457]        ret_from_fork+0x3a/0x50
[   66.674459]
               -> #0 (intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock){+.+.}:
[   66.674465]        __lock_acquire+0xe07/0x1930
[   66.674468]        lock_acquire+0x9d/0x1a0
[   66.674472]        __mutex_lock+0xa8/0x9a0
[   66.674474]        regmap_write+0x31/0x70
[   66.674480]        cht_wc_i2c_adap_smbus_xfer+0x72/0x240 [i2c_cht_wc]
[   66.674483]        __i2c_smbus_xfer+0x1a3/0x640
[   66.674486]        i2c_smbus_xfer+0x67/0xf0
[   66.674489]        i2c_smbus_read_byte_data+0x45/0x70
[   66.674494]        bq24190_probe+0x26b/0x410 [bq24190_charger]
[   66.674497]        i2c_device_probe+0x189/0x250
[   66.674500]        really_probe+0xf3/0x380
[   66.674503]        driver_probe_device+0x59/0xd0
[   66.674506]        device_driver_attach+0x53/0x60
[   66.674509]        __driver_attach+0x92/0x150
[   66.674512]        bus_for_each_dev+0x7d/0xc0
[   66.674515]        bus_add_driver+0x14d/0x1f0
[   66.674518]        driver_register+0x6d/0xb0
[   66.674521]        i2c_register_driver+0x45/0x80
[   66.674524]        do_one_initcall+0x60/0x2f4
[   66.674528]        do_init_module+0x5c/0x230
[   66.674531]        load_module+0x2707/0x2a20
[   66.674534]        __do_sys_init_module+0x188/0x1b0
[   66.674537]        do_syscall_64+0x5c/0xb0
[   66.674541]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   66.674543]
               other info that might help us debug this:

[   66.674545]  Possible unsafe locking scenario:

[   66.674547]        CPU0                    CPU1
[   66.674548]        ----                    ----
[   66.674550]   lock(i2c_register_adapter);
[   66.674553]                                lock(intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock);
[   66.674556]                                lock(i2c_register_adapter);
[   66.674559]   lock(intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock);
[   66.674561]
                *** DEADLOCK ***

The problem is that the CHT Whiskey Cove PMIC's builtin i2c-adapter is
itself a part of an i2c-client (the PMIC). This means that transfers done
through it take adapter->bus_lock twice, once for the parent i2c-adapter
and once for its own bus_lock. Lockdep does not like this nested locking.

To make lockdep happy in the case of busses with muxes, the i2c-core's
i2c_adapter_lock_bus function calls:

 rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));

But i2c_adapter_depth only works when the direct parent of the adapter is
another adapter, as it is only meant for muxes. In this case there is an
i2c-client and MFD instantiated platform_device in the parent->child chain
between the 2 devices.

This commit overrides the default i2c_lock_operations, passing a hardcoded
depth of 1 to rt_mutex_lock_nested, making lockdep happy.

Note that if there were to be a mux attached to the i2c-wc-cht adapter,
this would break things again since the i2c-mux code expects the
root-adapter to have a locking depth of 0. But the i2c-wc-cht adapter
always has only 1 client directly attached in the form of the charger IC
paired with the CHT Whiskey Cove PMIC.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-cht-wc.c | 46 +++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index 66af44bfa67d5..f6546de66fbc8 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -178,6 +178,51 @@ static const struct i2c_algorithm cht_wc_i2c_adap_algo = {
 	.smbus_xfer = cht_wc_i2c_adap_smbus_xfer,
 };
 
+/*
+ * We are an i2c-adapter which itself is part of an i2c-client. This means that
+ * transfers done through us take adapter->bus_lock twice, once for our parent
+ * i2c-adapter and once to take our own bus_lock. Lockdep does not like this
+ * nested locking, to make lockdep happy in the case of busses with muxes, the
+ * i2c-core's i2c_adapter_lock_bus function calls:
+ * rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
+ *
+ * But i2c_adapter_depth only works when the direct parent of the adapter is
+ * another adapter, as it is only meant for muxes. In our case there is an
+ * i2c-client and MFD instantiated platform_device in the parent->child chain
+ * between the 2 devices.
+ *
+ * So we override the default i2c_lock_operations and pass a hardcoded
+ * depth of 1 to rt_mutex_lock_nested, to make lockdep happy.
+ *
+ * Note that if there were to be a mux attached to our adapter, this would
+ * break things again since the i2c-mux code expects the root-adapter to have
+ * a locking depth of 0. But we always have only 1 client directly attached
+ * in the form of the Charger IC paired with the CHT Whiskey Cove PMIC.
+ */
+static void cht_wc_i2c_adap_lock_bus(struct i2c_adapter *adapter,
+				 unsigned int flags)
+{
+	rt_mutex_lock_nested(&adapter->bus_lock, 1);
+}
+
+static int cht_wc_i2c_adap_trylock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	return rt_mutex_trylock(&adapter->bus_lock);
+}
+
+static void cht_wc_i2c_adap_unlock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	rt_mutex_unlock(&adapter->bus_lock);
+}
+
+static const struct i2c_lock_operations cht_wc_i2c_adap_lock_ops = {
+	.lock_bus =    cht_wc_i2c_adap_lock_bus,
+	.trylock_bus = cht_wc_i2c_adap_trylock_bus,
+	.unlock_bus =  cht_wc_i2c_adap_unlock_bus,
+};
+
 /**** irqchip for the client connected to the extchgr i2c adapter ****/
 static void cht_wc_i2c_irq_lock(struct irq_data *data)
 {
@@ -286,6 +331,7 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 	adap->adapter.owner = THIS_MODULE;
 	adap->adapter.class = I2C_CLASS_HWMON;
 	adap->adapter.algo = &cht_wc_i2c_adap_algo;
+	adap->adapter.lock_ops = &cht_wc_i2c_adap_lock_ops;
 	strlcpy(adap->adapter.name, "PMIC I2C Adapter",
 		sizeof(adap->adapter.name));
 	adap->adapter.dev.parent = &pdev->dev;
-- 
2.20.1


  parent reply	other threads:[~2019-09-29 17:33 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-29 17:32 [PATCH AUTOSEL 5.2 01/42] MIPS: Ingenic: Disable broken BTB lookup optimization Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 02/42] clk: jz4740: Add TCU clock Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 03/42] MIPS: Don't use bc_false uninitialized in __mm_isBranchInstr Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 04/42] MIPS: tlbex: Explicitly cast _PAGE_NO_EXEC to a boolean Sasha Levin
2019-09-29 17:32 ` Sasha Levin [this message]
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 06/42] mfd: intel-lpss: Remove D3cold delay Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 07/42] PCI: tegra: Fix OF node reference leak Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 08/42] HID: wacom: Fix several minor compiler warnings Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 09/42] mips/atomic: Fix loongson_llsc_mb() wreckage Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 10/42] PCI: pci-hyperv: Fix build errors on non-SYSFS config Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 11/42] PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driver Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 12/42] livepatch: Nullify obj->mod in klp_module_coming()'s error path Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 13/42] mips/atomic: Fix smp_mb__{before,after}_atomic() Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 14/42] ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 15/42] soundwire: intel: fix channel number reported by hardware Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 16/42] ARM: 8875/1: Kconfig: default to AEABI w/ Clang Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 17/42] MIPS: lantiq: update the clock alias' for the mainline PCIe PHY driver Sasha Levin
2019-09-29 17:39   ` Hauke Mehrtens
2019-10-05 23:00     ` Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 18/42] firmware: bcm47xx_nvram: Correct size_t printf format Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 19/42] rtc: snvs: fix possible race condition Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 20/42] rtc: pcf85363/pcf85263: fix regmap error in set_time Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 21/42] selinux: fix residual uses of current_security() for the SELinux blob Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 22/42] PCI: Add pci_info_ratelimited() to ratelimit PCI separately Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 23/42] HID: apple: Fix stuck function keys when using FN Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 24/42] PCI: rockchip: Propagate errors for optional regulators Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 25/42] PCI: histb: " Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 26/42] PCI: imx6: " Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 27/42] PCI: exynos: Propagate errors for optional PHYs Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 28/42] security: smack: Fix possible null-pointer dereferences in smack_socket_sock_rcv_skb() Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 29/42] PCI: Use static const struct, not const static struct Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 30/42] ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 31/42] ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 32/42] fat: work around race with userspace's read via blockdev while mounting Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 33/42] pktcdvd: remove warning on attempting to register non-passthrough dev Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 34/42] hypfs: Fix error number left in struct pointer member Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 35/42] crypto: hisilicon - Fix double free in sec_free_hw_sgl() Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 36/42] kbuild: clean compressed initramfs image Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 37/42] ocfs2: wait for recovering done after direct unlock request Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 38/42] kmemleak: increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE default to 16K Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 39/42] arm64: consider stack randomization for mmap base only when necessary Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 40/42] mips: properly account for stack randomization and stack guard gap Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 41/42] arm: " Sasha Levin
2019-09-29 17:32 ` [PATCH AUTOSEL 5.2 42/42] arm: use STACK_TOP when computing mmap base address Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190929173244.8918-5-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=hdegoede@redhat.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).