[PATCH AUTOSEL 4.19 01/33] MIPS: Ingenic: Disable broken BTB lookup optimization.

[PATCH AUTOSEL 4.19 01/33] MIPS: Ingenic: Disable broken BTB lookup optimization.

[Sasha Levin]

From: Zhou Yanjie <zhouyanjie@zoho.com>

[ Upstream commit 053951dda71ecb4b554a2cdbe26f5f6f9bee9dd2 ]

In order to further reduce power consumption, the XBurst core
by default attempts to avoid branch target buffer lookups by
detecting & special casing loops. This feature will cause
BogoMIPS and lpj calculate in error. Set cp0 config7 bit 4 to
disable this feature.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: ralf@linux-mips.org
Cc: paul@crapouillou.net
Cc: jhogan@kernel.org
Cc: malat@debian.org
Cc: gregkh@linuxfoundation.org
Cc: tglx@linutronix.de
Cc: allison@lohutok.net
Cc: syq@debian.org
Cc: chenhc@lemote.com
Cc: jiaxun.yang@flygoat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/mipsregs.h | 4 ++++
 arch/mips/kernel/cpu-probe.c     | 7 +++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 01df9ad62fb83..1bb9448777c5c 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -688,6 +688,9 @@
 #define MIPS_CONF7_IAR		(_ULCAST_(1) << 10)
 #define MIPS_CONF7_AR		(_ULCAST_(1) << 16)
 
+/* Ingenic Config7 bits */
+#define MIPS_CONF7_BTB_LOOP_EN	(_ULCAST_(1) << 4)
+
 /* Config7 Bits specific to MIPS Technologies. */
 
 /* Performance counters implemented Per TC */
@@ -2774,6 +2777,7 @@ __BUILD_SET_C0(status)
 __BUILD_SET_C0(cause)
 __BUILD_SET_C0(config)
 __BUILD_SET_C0(config5)
+__BUILD_SET_C0(config7)
 __BUILD_SET_C0(intcontrol)
 __BUILD_SET_C0(intctl)
 __BUILD_SET_C0(srsmap)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index d535fc706a8b3..25cd8737e7fe0 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1879,6 +1879,13 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_JZRISC;
 		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 		__cpu_name[cpu] = "Ingenic JZRISC";
+		/*
+		 * The XBurst core by default attempts to avoid branch target
+		 * buffer lookups by detecting & special casing loops. This
+		 * feature will cause BogoMIPS and lpj calculate in error.
+		 * Set cp0 config7 bit 4 to disable this feature.
+		 */
+		set_c0_config7(MIPS_CONF7_BTB_LOOP_EN);
 		break;
 	default:
 		panic("Unknown Ingenic Processor ID!");
-- 
2.20.1

[PATCH AUTOSEL 4.19 02/33] clk: jz4740: Add TCU clock

[Sasha Levin]

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit 73dd11dc1a883d4c994d729dc9984f4890001157 ]

Add the missing TCU clock to the list of clocks supplied by the CGU for
the JZ4740 SoC.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: od@zcrc.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ingenic/jz4740-cgu.c       | 6 ++++++
 include/dt-bindings/clock/jz4740-cgu.h | 1 +
 2 files changed, 7 insertions(+)

diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
index 4479c102e8994..d8ac7f2e183a1 100644
--- a/drivers/clk/ingenic/jz4740-cgu.c
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -211,6 +211,12 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
 		.gate = { CGU_REG_CLKGR, 5 },
 	},
+
+	[JZ4740_CLK_TCU] = {
+		"tcu", CGU_CLK_GATE,
+		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 1 },
+	},
 };
 
 static void __init jz4740_cgu_init(struct device_node *np)
diff --git a/include/dt-bindings/clock/jz4740-cgu.h b/include/dt-bindings/clock/jz4740-cgu.h
index 6ed83f926ae71..e82d77028581a 100644
--- a/include/dt-bindings/clock/jz4740-cgu.h
+++ b/include/dt-bindings/clock/jz4740-cgu.h
@@ -34,5 +34,6 @@
 #define JZ4740_CLK_ADC		19
 #define JZ4740_CLK_I2C		20
 #define JZ4740_CLK_AIC		21
+#define JZ4740_CLK_TCU		22
 
 #endif /* __DT_BINDINGS_CLOCK_JZ4740_CGU_H__ */
-- 
2.20.1

[PATCH AUTOSEL 4.19 03/33] MIPS: tlbex: Explicitly cast _PAGE_NO_EXEC to a boolean

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit c59ae0a1055127dd3828a88e111a0db59b254104 ]

clang warns:

arch/mips/mm/tlbex.c:634:19: error: use of logical '&&' with constant
operand [-Werror,-Wconstant-logical-operand]
        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                         ^  ~~~~~~~~~~~~~
arch/mips/mm/tlbex.c:634:19: note: use '&' for a bitwise operation
        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                         ^~
                         &
arch/mips/mm/tlbex.c:634:19: note: remove constant to silence this
warning
        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                        ~^~~~~~~~~~~~~~~~
1 error generated.

Explicitly cast this value to a boolean so that clang understands we
intend for this to be a non-zero value.

Fixes: 00bf1c691d08 ("MIPS: tlbex: Avoid placing software PTE bits in Entry* PFN fields")
Link: https://github.com/ClangBuiltLinux/linux/issues/609
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/mm/tlbex.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 8c4fda52b91dc..355f8eadb1cd2 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -630,7 +630,7 @@ static __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
 		return;
 	}
 
-	if (cpu_has_rixi && _PAGE_NO_EXEC) {
+	if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
 		if (fill_includes_sw_bits) {
 			UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
 		} else {
-- 
2.20.1

[PATCH AUTOSEL 4.19 04/33] i2c-cht-wc: Fix lockdep warning

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 232219b9a464c2479c98aa589acb1bd3383ae9d6 ]

When the kernel is build with lockdep support and the i2c-cht-wc driver is
used, the following warning is shown:

[   66.674334] ======================================================
[   66.674337] WARNING: possible circular locking dependency detected
[   66.674340] 5.3.0-rc4+ #83 Not tainted
[   66.674342] ------------------------------------------------------
[   66.674345] systemd-udevd/1232 is trying to acquire lock:
[   66.674349] 00000000a74dab07 (intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock){+.+.}, at: regmap_write+0x31/0x70
[   66.674360]
               but task is already holding lock:
[   66.674362] 00000000d44a85b7 (i2c_register_adapter){+.+.}, at: i2c_smbus_xfer+0x49/0xf0
[   66.674370]
               which lock already depends on the new lock.

[   66.674371]
               the existing dependency chain (in reverse order) is:
[   66.674374]
               -> #1 (i2c_register_adapter){+.+.}:
[   66.674381]        rt_mutex_lock_nested+0x46/0x60
[   66.674384]        i2c_smbus_xfer+0x49/0xf0
[   66.674387]        i2c_smbus_read_byte_data+0x45/0x70
[   66.674391]        cht_wc_byte_reg_read+0x35/0x50
[   66.674394]        _regmap_read+0x63/0x1a0
[   66.674396]        _regmap_update_bits+0xa8/0xe0
[   66.674399]        regmap_update_bits_base+0x63/0xa0
[   66.674403]        regmap_irq_update_bits.isra.0+0x3b/0x50
[   66.674406]        regmap_add_irq_chip+0x592/0x7a0
[   66.674409]        devm_regmap_add_irq_chip+0x89/0xed
[   66.674412]        cht_wc_probe+0x102/0x158
[   66.674415]        i2c_device_probe+0x95/0x250
[   66.674419]        really_probe+0xf3/0x380
[   66.674422]        driver_probe_device+0x59/0xd0
[   66.674425]        device_driver_attach+0x53/0x60
[   66.674428]        __driver_attach+0x92/0x150
[   66.674431]        bus_for_each_dev+0x7d/0xc0
[   66.674434]        bus_add_driver+0x14d/0x1f0
[   66.674437]        driver_register+0x6d/0xb0
[   66.674440]        i2c_register_driver+0x45/0x80
[   66.674445]        do_one_initcall+0x60/0x2f4
[   66.674450]        kernel_init_freeable+0x20d/0x2b4
[   66.674453]        kernel_init+0xa/0x10c
[   66.674457]        ret_from_fork+0x3a/0x50
[   66.674459]
               -> #0 (intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock){+.+.}:
[   66.674465]        __lock_acquire+0xe07/0x1930
[   66.674468]        lock_acquire+0x9d/0x1a0
[   66.674472]        __mutex_lock+0xa8/0x9a0
[   66.674474]        regmap_write+0x31/0x70
[   66.674480]        cht_wc_i2c_adap_smbus_xfer+0x72/0x240 [i2c_cht_wc]
[   66.674483]        __i2c_smbus_xfer+0x1a3/0x640
[   66.674486]        i2c_smbus_xfer+0x67/0xf0
[   66.674489]        i2c_smbus_read_byte_data+0x45/0x70
[   66.674494]        bq24190_probe+0x26b/0x410 [bq24190_charger]
[   66.674497]        i2c_device_probe+0x189/0x250
[   66.674500]        really_probe+0xf3/0x380
[   66.674503]        driver_probe_device+0x59/0xd0
[   66.674506]        device_driver_attach+0x53/0x60
[   66.674509]        __driver_attach+0x92/0x150
[   66.674512]        bus_for_each_dev+0x7d/0xc0
[   66.674515]        bus_add_driver+0x14d/0x1f0
[   66.674518]        driver_register+0x6d/0xb0
[   66.674521]        i2c_register_driver+0x45/0x80
[   66.674524]        do_one_initcall+0x60/0x2f4
[   66.674528]        do_init_module+0x5c/0x230
[   66.674531]        load_module+0x2707/0x2a20
[   66.674534]        __do_sys_init_module+0x188/0x1b0
[   66.674537]        do_syscall_64+0x5c/0xb0
[   66.674541]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   66.674543]
               other info that might help us debug this:

[   66.674545]  Possible unsafe locking scenario:

[   66.674547]        CPU0                    CPU1
[   66.674548]        ----                    ----
[   66.674550]   lock(i2c_register_adapter);
[   66.674553]                                lock(intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock);
[   66.674556]                                lock(i2c_register_adapter);
[   66.674559]   lock(intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock);
[   66.674561]
                *** DEADLOCK ***

The problem is that the CHT Whiskey Cove PMIC's builtin i2c-adapter is
itself a part of an i2c-client (the PMIC). This means that transfers done
through it take adapter->bus_lock twice, once for the parent i2c-adapter
and once for its own bus_lock. Lockdep does not like this nested locking.

To make lockdep happy in the case of busses with muxes, the i2c-core's
i2c_adapter_lock_bus function calls:

 rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));

But i2c_adapter_depth only works when the direct parent of the adapter is
another adapter, as it is only meant for muxes. In this case there is an
i2c-client and MFD instantiated platform_device in the parent->child chain
between the 2 devices.

This commit overrides the default i2c_lock_operations, passing a hardcoded
depth of 1 to rt_mutex_lock_nested, making lockdep happy.

Note that if there were to be a mux attached to the i2c-wc-cht adapter,
this would break things again since the i2c-mux code expects the
root-adapter to have a locking depth of 0. But the i2c-wc-cht adapter
always has only 1 client directly attached in the form of the charger IC
paired with the CHT Whiskey Cove PMIC.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-cht-wc.c | 46 +++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index c4d176f5ed793..f890af67f5017 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -187,6 +187,51 @@ static const struct i2c_algorithm cht_wc_i2c_adap_algo = {
 	.smbus_xfer = cht_wc_i2c_adap_smbus_xfer,
 };
 
+/*
+ * We are an i2c-adapter which itself is part of an i2c-client. This means that
+ * transfers done through us take adapter->bus_lock twice, once for our parent
+ * i2c-adapter and once to take our own bus_lock. Lockdep does not like this
+ * nested locking, to make lockdep happy in the case of busses with muxes, the
+ * i2c-core's i2c_adapter_lock_bus function calls:
+ * rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
+ *
+ * But i2c_adapter_depth only works when the direct parent of the adapter is
+ * another adapter, as it is only meant for muxes. In our case there is an
+ * i2c-client and MFD instantiated platform_device in the parent->child chain
+ * between the 2 devices.
+ *
+ * So we override the default i2c_lock_operations and pass a hardcoded
+ * depth of 1 to rt_mutex_lock_nested, to make lockdep happy.
+ *
+ * Note that if there were to be a mux attached to our adapter, this would
+ * break things again since the i2c-mux code expects the root-adapter to have
+ * a locking depth of 0. But we always have only 1 client directly attached
+ * in the form of the Charger IC paired with the CHT Whiskey Cove PMIC.
+ */
+static void cht_wc_i2c_adap_lock_bus(struct i2c_adapter *adapter,
+				 unsigned int flags)
+{
+	rt_mutex_lock_nested(&adapter->bus_lock, 1);
+}
+
+static int cht_wc_i2c_adap_trylock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	return rt_mutex_trylock(&adapter->bus_lock);
+}
+
+static void cht_wc_i2c_adap_unlock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	rt_mutex_unlock(&adapter->bus_lock);
+}
+
+static const struct i2c_lock_operations cht_wc_i2c_adap_lock_ops = {
+	.lock_bus =    cht_wc_i2c_adap_lock_bus,
+	.trylock_bus = cht_wc_i2c_adap_trylock_bus,
+	.unlock_bus =  cht_wc_i2c_adap_unlock_bus,
+};
+
 /**** irqchip for the client connected to the extchgr i2c adapter ****/
 static void cht_wc_i2c_irq_lock(struct irq_data *data)
 {
@@ -295,6 +340,7 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 	adap->adapter.owner = THIS_MODULE;
 	adap->adapter.class = I2C_CLASS_HWMON;
 	adap->adapter.algo = &cht_wc_i2c_adap_algo;
+	adap->adapter.lock_ops = &cht_wc_i2c_adap_lock_ops;
 	strlcpy(adap->adapter.name, "PMIC I2C Adapter",
 		sizeof(adap->adapter.name));
 	adap->adapter.dev.parent = &pdev->dev;
-- 
2.20.1

[PATCH AUTOSEL 4.19 05/33] mfd: intel-lpss: Remove D3cold delay

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 76380a607ba0b28627c9b4b55cd47a079a59624b ]

Goodix touchpad may drop its first couple input events when
i2c-designware-platdrv and intel-lpss it connects to took too long to
runtime resume from runtime suspended state.

This issue happens becuase the touchpad has a rather small buffer to
store up to 13 input events, so if the host doesn't read those events in
time (i.e. runtime resume takes too long), events are dropped from the
touchpad's buffer.

The bottleneck is D3cold delay it waits when transitioning from D3cold
to D0, hence remove the delay to make the resume faster. I've tested
some systems with intel-lpss and haven't seen any regression.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202683
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/intel-lpss-pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
index 0e5282fc14675..c37c8bb860685 100644
--- a/drivers/mfd/intel-lpss-pci.c
+++ b/drivers/mfd/intel-lpss-pci.c
@@ -39,6 +39,8 @@ static int intel_lpss_pci_probe(struct pci_dev *pdev,
 	info->mem = &pdev->resource[0];
 	info->irq = pdev->irq;
 
+	pdev->d3cold_delay = 0;
+
 	/* Probably it is enough to set this for iDMA capable devices only */
 	pci_set_master(pdev);
 	pci_try_set_mwi(pdev);
-- 
2.20.1

[PATCH AUTOSEL 4.19 06/33] PCI: tegra: Fix OF node reference leak

[Sasha Levin]

From: Nishka Dasgupta <nishkadg.linux@gmail.com>

[ Upstream commit 9e38e690ace3e7a22a81fc02652fc101efb340cf ]

Each iteration of for_each_child_of_node() executes of_node_put() on the
previous node, but in some return paths in the middle of the loop
of_node_put() is missing thus causing a reference leak.

Hence stash these mid-loop return values in a variable 'err' and add a
new label err_node_put which executes of_node_put() on the previous node
and returns 'err' on failure.

Change mid-loop return statements to point to jump to this label to
fix the reference leak.

Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
[lorenzo.pieralisi@arm.com: rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-tegra.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index f4f53d092e005..976eaa9a9f266 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -1975,14 +1975,15 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		err = of_pci_get_devfn(port);
 		if (err < 0) {
 			dev_err(dev, "failed to parse address: %d\n", err);
-			return err;
+			goto err_node_put;
 		}
 
 		index = PCI_SLOT(err);
 
 		if (index < 1 || index > soc->num_ports) {
 			dev_err(dev, "invalid port number: %d\n", index);
-			return -EINVAL;
+			err = -EINVAL;
+			goto err_node_put;
 		}
 
 		index--;
@@ -1991,12 +1992,13 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		if (err < 0) {
 			dev_err(dev, "failed to parse # of lanes: %d\n",
 				err);
-			return err;
+			goto err_node_put;
 		}
 
 		if (value > 16) {
 			dev_err(dev, "invalid # of lanes: %u\n", value);
-			return -EINVAL;
+			err = -EINVAL;
+			goto err_node_put;
 		}
 
 		lanes |= value << (index << 3);
@@ -2010,13 +2012,15 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		lane += value;
 
 		rp = devm_kzalloc(dev, sizeof(*rp), GFP_KERNEL);
-		if (!rp)
-			return -ENOMEM;
+		if (!rp) {
+			err = -ENOMEM;
+			goto err_node_put;
+		}
 
 		err = of_address_to_resource(port, 0, &rp->regs);
 		if (err < 0) {
 			dev_err(dev, "failed to parse address: %d\n", err);
-			return err;
+			goto err_node_put;
 		}
 
 		INIT_LIST_HEAD(&rp->list);
@@ -2043,6 +2047,10 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		return err;
 
 	return 0;
+
+err_node_put:
+	of_node_put(port);
+	return err;
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.19 07/33] HID: wacom: Fix several minor compiler warnings

[Sasha Levin]

From: Jason Gerecke <killertofu@gmail.com>

[ Upstream commit 073b50bccbbf99a3b79a1913604c656d0e1a56c9 ]

Addresses a few issues that were noticed when compiling with non-default
warnings enabled. The trimmed-down warnings in the order they are fixed
below are:

* declaration of 'size' shadows a parameter

* '%s' directive output may be truncated writing up to 5 bytes into a
  region of size between 1 and 64

* pointer targets in initialization of 'char *' from 'unsigned char *'
  differ in signedness

* left shift of negative value

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/wacom_sys.c | 7 ++++---
 drivers/hid/wacom_wac.c | 4 ++--
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 5a2d5140c1f42..3038c975e417c 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -91,7 +91,7 @@ static void wacom_wac_queue_flush(struct hid_device *hdev,
 }
 
 static int wacom_wac_pen_serial_enforce(struct hid_device *hdev,
-		struct hid_report *report, u8 *raw_data, int size)
+		struct hid_report *report, u8 *raw_data, int report_size)
 {
 	struct wacom *wacom = hid_get_drvdata(hdev);
 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
@@ -152,7 +152,8 @@ static int wacom_wac_pen_serial_enforce(struct hid_device *hdev,
 	if (flush)
 		wacom_wac_queue_flush(hdev, &wacom_wac->pen_fifo);
 	else if (insert)
-		wacom_wac_queue_insert(hdev, &wacom_wac->pen_fifo, raw_data, size);
+		wacom_wac_queue_insert(hdev, &wacom_wac->pen_fifo,
+				       raw_data, report_size);
 
 	return insert && !flush;
 }
@@ -2147,7 +2148,7 @@ static void wacom_update_name(struct wacom *wacom, const char *suffix)
 {
 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
 	struct wacom_features *features = &wacom_wac->features;
-	char name[WACOM_NAME_MAX];
+	char name[WACOM_NAME_MAX - 20]; /* Leave some room for suffixes */
 
 	/* Generic devices name unspecified */
 	if ((features->type == HID_GENERIC) && !strcmp("Wacom HID", features->name)) {
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 6f5c838f9d474..1df037e7f0b42 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -255,7 +255,7 @@ static int wacom_dtu_irq(struct wacom_wac *wacom)
 
 static int wacom_dtus_irq(struct wacom_wac *wacom)
 {
-	char *data = wacom->data;
+	unsigned char *data = wacom->data;
 	struct input_dev *input = wacom->pen_input;
 	unsigned short prox, pressure = 0;
 
@@ -576,7 +576,7 @@ static int wacom_intuos_pad(struct wacom_wac *wacom)
 		strip2 = ((data[3] & 0x1f) << 8) | data[4];
 	}
 
-	prox = (buttons & ~(~0 << nbuttons)) | (keys & ~(~0 << nkeys)) |
+	prox = (buttons & ~(~0U << nbuttons)) | (keys & ~(~0U << nkeys)) |
 	       (ring1 & 0x80) | (ring2 & 0x80) | strip1 | strip2;
 
 	wacom_report_numbered_buttons(input, nbuttons, buttons);
-- 
2.20.1

[PATCH AUTOSEL 4.19 08/33] livepatch: Nullify obj->mod in klp_module_coming()'s error path

[Sasha Levin]

From: Miroslav Benes <mbenes@suse.cz>

[ Upstream commit 4ff96fb52c6964ad42e0a878be8f86a2e8052ddd ]

klp_module_coming() is called for every module appearing in the system.
It sets obj->mod to a patched module for klp_object obj. Unfortunately
it leaves it set even if an error happens later in the function and the
patched module is not allowed to be loaded.

klp_is_object_loaded() uses obj->mod variable and could currently give a
wrong return value. The bug is probably harmless as of now.

Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/livepatch/core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c
index 722c27c40e5b3..a1250ad591c1d 100644
--- a/kernel/livepatch/core.c
+++ b/kernel/livepatch/core.c
@@ -1027,6 +1027,7 @@ int klp_module_coming(struct module *mod)
 	pr_warn("patch '%s' failed for module '%s', refusing to load module '%s'\n",
 		patch->mod->name, obj->mod->name, obj->mod->name);
 	mod->klp_alive = false;
+	obj->mod = NULL;
 	klp_cleanup_module_patches_limited(mod, patch);
 	mutex_unlock(&klp_mutex);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 09/33] ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes

[Sasha Levin]

From: Will Deacon <will@kernel.org>

[ Upstream commit 834020366da9ab3fb87d1eb9a3160eb22dbed63a ]

Translation faults arising from cache maintenance instructions are
rather unhelpfully reported with an FSR value where the WnR field is set
to 1, indicating that the faulting access was a write. Since cache
maintenance instructions on 32-bit ARM do not require any particular
permissions, this can cause our private 'cacheflush' system call to fail
spuriously if a translation fault is generated due to page aging when
targetting a read-only VMA.

In this situation, we will return -EFAULT to userspace, although this is
unfortunately suppressed by the popular '__builtin___clear_cache()'
intrinsic provided by GCC, which returns void.

Although it's tempting to write this off as a userspace issue, we can
actually do a little bit better on CPUs that support LPAE, even if the
short-descriptor format is in use. On these CPUs, cache maintenance
faults additionally set the CM field in the FSR, which we can use to
suppress the write permission checks in the page fault handler and
succeed in performing cache maintenance to read-only areas even in the
presence of a translation fault.

Reported-by: Orion Hodson <oth@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/fault.c | 4 ++--
 arch/arm/mm/fault.h | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 3232afb6fdc00..a9ee0d9dc740a 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -216,7 +216,7 @@ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
 {
 	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
 
-	if (fsr & FSR_WRITE)
+	if ((fsr & FSR_WRITE) && !(fsr & FSR_CM))
 		mask = VM_WRITE;
 	if (fsr & FSR_LNX_PF)
 		mask = VM_EXEC;
@@ -287,7 +287,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (user_mode(regs))
 		flags |= FAULT_FLAG_USER;
-	if (fsr & FSR_WRITE)
+	if ((fsr & FSR_WRITE) && !(fsr & FSR_CM))
 		flags |= FAULT_FLAG_WRITE;
 
 	/*
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index c063708fa5032..9ecc2097a87a0 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -6,6 +6,7 @@
  * Fault status register encodings.  We steal bit 31 for our own purposes.
  */
 #define FSR_LNX_PF		(1 << 31)
+#define FSR_CM			(1 << 13)
 #define FSR_WRITE		(1 << 11)
 #define FSR_FS4			(1 << 10)
 #define FSR_FS3_0		(15)
-- 
2.20.1

[PATCH AUTOSEL 4.19 10/33] soundwire: intel: fix channel number reported by hardware

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 18046335643de6d21327f5ae034c8fb8463f6715 ]

On all released Intel controllers (CNL/CML/ICL), PDI2 reports an
invalid count, force the correct hardware-supported value

This may have to be revisited with platform-specific values if the
hardware changes, but for now this is good enough.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190806005522.22642-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soundwire/intel.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index a6e2581ada703..29bc99c4a7b66 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -282,6 +282,16 @@ intel_pdi_get_ch_cap(struct sdw_intel *sdw, unsigned int pdi_num, bool pcm)
 
 	if (pcm) {
 		count = intel_readw(shim, SDW_SHIM_PCMSYCHC(link_id, pdi_num));
+
+		/*
+		 * WORKAROUND: on all existing Intel controllers, pdi
+		 * number 2 reports channel count as 1 even though it
+		 * supports 8 channels. Performing hardcoding for pdi
+		 * number 2.
+		 */
+		if (pdi_num == 2)
+			count = 7;
+
 	} else {
 		count = intel_readw(shim, SDW_SHIM_PDMSCAP(link_id));
 		count = ((count & SDW_SHIM_PDMSCAP_CPSS) >>
-- 
2.20.1

[PATCH AUTOSEL 4.19 11/33] ARM: 8875/1: Kconfig: default to AEABI w/ Clang

[Sasha Levin]

From: Nick Desaulniers <ndesaulniers@google.com>

[ Upstream commit a05b9608456e0d4464c6f7ca8572324ace57a3f4 ]

Clang produces references to __aeabi_uidivmod and __aeabi_idivmod for
arm-linux-gnueabi and arm-linux-gnueabihf targets incorrectly when AEABI
is not selected (such as when OABI_COMPAT is selected).

While this means that OABI userspaces wont be able to upgraded to
kernels built with Clang, it means that boards that don't enable AEABI
like s3c2410_defconfig will stop failing to link in KernelCI when built
with Clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/482
Link: https://groups.google.com/forum/#!msg/clang-built-linux/yydsAAux5hk/GxjqJSW-AQAJ

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/Kconfig | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 51794c7fa6d5b..185e552f14610 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1586,8 +1586,9 @@ config ARM_PATCH_IDIV
 	  code to do integer division.
 
 config AEABI
-	bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && !CPU_V7M && !CPU_V6 && !CPU_V6K
-	default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K
+	bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && \
+		!CPU_V7M && !CPU_V6 && !CPU_V6K && !CC_IS_CLANG
+	default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K || CC_IS_CLANG
 	help
 	  This option allows for the kernel to be compiled using the latest
 	  ARM ABI (aka EABI).  This is only useful if you are using a user
-- 
2.20.1

[PATCH AUTOSEL 4.19 12/33] MIPS: lantiq: update the clock alias' for the mainline PCIe PHY driver

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit ed90302be64a53d9031c8ce05428c358b16a5d96 ]

The mainline PCIe PHY driver has it's own devicetree node. Update the
clock alias so the mainline driver finds the clocks.

The first PCIe PHY is located at 0x1f106800 and exists on VRX200, ARX300
and GRX390.
The second PCIe PHY is located at 0x1f700400 and exists on ARX300 and
GRX390.
The third PCIe PHY is located at 0x1f106a00 and exists onl on GRX390.
Lantiq's board support package (called "UGW") names these registers
"PDI".

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: john@phrozen.org
Cc: kishon@ti.com
Cc: ralf@linux-mips.org
Cc: robh+dt@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: hauke@hauke-m.de
Cc: mark.rutland@arm.com
Cc: ms@dev.tdt.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/lantiq/xway/sysctrl.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index e0af39b33e287..4334d83784dab 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -470,14 +470,14 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB0_P);
 		clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB1_P);
 		/* rc 0 */
-		clkdev_add_pmu("1d900000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE0_P);
+		clkdev_add_pmu("1f106800.phy", "phy", 1, 2, PMU_ANALOG_PCIE0_P);
 		clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
-		clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI);
+		clkdev_add_pmu("1f106800.phy", "pdi", 1, 1, PMU1_PCIE_PDI);
 		clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
 		/* rc 1 */
-		clkdev_add_pmu("19000000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE1_P);
+		clkdev_add_pmu("1f700400.phy", "phy", 1, 2, PMU_ANALOG_PCIE1_P);
 		clkdev_add_pmu("19000000.pcie", "msi", 1, 1, PMU1_PCIE1_MSI);
-		clkdev_add_pmu("19000000.pcie", "pdi", 1, 1, PMU1_PCIE1_PDI);
+		clkdev_add_pmu("1f700400.phy", "pdi", 1, 1, PMU1_PCIE1_PDI);
 		clkdev_add_pmu("19000000.pcie", "ctl", 1, 1, PMU1_PCIE1_CTL);
 	}
 
@@ -501,9 +501,9 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
 		clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1);
 		/* rc 2 */
-		clkdev_add_pmu("1a800000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P);
+		clkdev_add_pmu("1f106a00.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P);
 		clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI);
-		clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
+		clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
 		clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL);
 		clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP);
 		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
@@ -528,10 +528,10 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
 		clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P);
 		clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM);
-		clkdev_add_pmu("1d900000.pcie", "phy", 1, 1, PMU1_PCIE_PHY);
+		clkdev_add_pmu("1f106800.phy", "phy", 1, 1, PMU1_PCIE_PHY);
 		clkdev_add_pmu("1d900000.pcie", "bus", 1, 0, PMU_PCIE_CLK);
 		clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
-		clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI);
+		clkdev_add_pmu("1f106800.phy", "pdi", 1, 1, PMU1_PCIE_PDI);
 		clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
 		clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 13/33] firmware: bcm47xx_nvram: Correct size_t printf format

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit feb4eb060c3aecc3c5076bebe699cd09f1133c41 ]

When building on a 64-bit host, we will get warnings like those:

drivers/firmware/broadcom/bcm47xx_nvram.c:103:3: note: in expansion of macro 'pr_err'
   pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
   ^~~~~~
drivers/firmware/broadcom/bcm47xx_nvram.c:103:28: note: format string is defined here
   pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
                           ~^
                           %li

Use %zu instead for that purpose.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: joe@perches.com
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/broadcom/bcm47xx_nvram.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/broadcom/bcm47xx_nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c
index d25f080fcb0d8..8698c5dd29d9c 100644
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -100,7 +100,7 @@ static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
 		nvram_len = size;
 	}
 	if (nvram_len >= NVRAM_SPACE) {
-		pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+		pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
 		       nvram_len, NVRAM_SPACE - 1);
 		nvram_len = NVRAM_SPACE - 1;
 	}
@@ -152,7 +152,7 @@ static int nvram_init(void)
 	    header.len > sizeof(header)) {
 		nvram_len = header.len;
 		if (nvram_len >= NVRAM_SPACE) {
-			pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+			pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
 				header.len, NVRAM_SPACE);
 			nvram_len = NVRAM_SPACE - 1;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.19 14/33] rtc: snvs: fix possible race condition

[Sasha Levin]

From: Anson Huang <Anson.Huang@nxp.com>

[ Upstream commit 6fd4fe9b496d9ba3382992ff4fde3871d1b6f63d ]

The RTC IRQ is requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in IRQ handler.

To fix this issue, allocating the rtc_device struct before requesting
the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20190716071858.36750-1-Anson.Huang@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-snvs.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
index b2483a749ac45..3cf011e120530 100644
--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -273,6 +273,10 @@ static int snvs_rtc_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
+	data->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(data->rtc))
+		return PTR_ERR(data->rtc);
+
 	data->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "regmap");
 
 	if (IS_ERR(data->regmap)) {
@@ -335,10 +339,9 @@ static int snvs_rtc_probe(struct platform_device *pdev)
 		goto error_rtc_device_register;
 	}
 
-	data->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
-					&snvs_rtc_ops, THIS_MODULE);
-	if (IS_ERR(data->rtc)) {
-		ret = PTR_ERR(data->rtc);
+	data->rtc->ops = &snvs_rtc_ops;
+	ret = rtc_register_device(data->rtc);
+	if (ret) {
 		dev_err(&pdev->dev, "failed to register rtc: %d\n", ret);
 		goto error_rtc_device_register;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 15/33] rtc: pcf85363/pcf85263: fix regmap error in set_time

[Sasha Levin]

From: Biwen Li <biwen.li@nxp.com>

[ Upstream commit 7ef66122bdb3b839e9f51b76d7e600b6e21ef648 ]

Issue:
    - # hwclock -w
      hwclock: RTC_SET_TIME: Invalid argument

Why:
    - Relative commit: 8b9f9d4dc511 ("regmap: verify if register is
      writeable before writing operations"), this patch
      will always check for unwritable registers, it will compare reg
      with max_register in regmap_writeable.

    - The pcf85363/pcf85263 has the capability of address wrapping
      which means if you access an address outside the allowed range
      (0x00-0x2f) hardware actually wraps the access to a lower address.
      The rtc-pcf85363 driver will use this feature to configure the time
      and execute 2 actions in the same i2c write operation (stopping the
      clock and configure the time). However the driver has also
      configured the `regmap maxregister` protection mechanism that will
      block accessing addresses outside valid range (0x00-0x2f).

How:
    - Split of writing regs to two parts, first part writes control
      registers about stop_enable and resets, second part writes
      RTC time and date registers.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Link: https://lore.kernel.org/r/20190829021418.4607-1-biwen.li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-pcf85363.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pcf85363.c b/drivers/rtc/rtc-pcf85363.c
index c04a1edcd5716..c3702684b3426 100644
--- a/drivers/rtc/rtc-pcf85363.c
+++ b/drivers/rtc/rtc-pcf85363.c
@@ -169,7 +169,12 @@ static int pcf85363_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	buf[DT_YEARS] = bin2bcd(tm->tm_year % 100);
 
 	ret = regmap_bulk_write(pcf85363->regmap, CTRL_STOP_EN,
-				tmp, sizeof(tmp));
+				tmp, 2);
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_write(pcf85363->regmap, DT_100THS,
+				buf, sizeof(tmp) - 2);
 	if (ret)
 		return ret;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 16/33] HID: apple: Fix stuck function keys when using FN

[Sasha Levin]

From: Joao Moreno <mail@joaomoreno.com>

[ Upstream commit aec256d0ecd561036f188dbc8fa7924c47a9edfd ]

This fixes an issue in which key down events for function keys would be
repeatedly emitted even after the user has raised the physical key. For
example, the driver fails to emit the F5 key up event when going through
the following steps:
- fnmode=1: hold FN, hold F5, release FN, release F5
- fnmode=2: hold F5, hold FN, release F5, release FN

The repeated F5 key down events can be easily verified using xev.

Signed-off-by: Joao Moreno <mail@joaomoreno.com>
Co-developed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-apple.c | 49 +++++++++++++++++++++++------------------
 1 file changed, 28 insertions(+), 21 deletions(-)

diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 1cb41992aaa1f..d0a81a03ddbdd 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -57,7 +57,6 @@ MODULE_PARM_DESC(swap_opt_cmd, "Swap the Option (\"Alt\") and Command (\"Flag\")
 struct apple_sc {
 	unsigned long quirks;
 	unsigned int fn_on;
-	DECLARE_BITMAP(pressed_fn, KEY_CNT);
 	DECLARE_BITMAP(pressed_numlock, KEY_CNT);
 };
 
@@ -184,6 +183,8 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 {
 	struct apple_sc *asc = hid_get_drvdata(hid);
 	const struct apple_key_translation *trans, *table;
+	bool do_translate;
+	u16 code = 0;
 
 	if (usage->code == KEY_FN) {
 		asc->fn_on = !!value;
@@ -192,8 +193,6 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 	}
 
 	if (fnmode) {
-		int do_translate;
-
 		if (hid->product >= USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI &&
 				hid->product <= USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS)
 			table = macbookair_fn_keys;
@@ -205,25 +204,33 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 		trans = apple_find_translation (table, usage->code);
 
 		if (trans) {
-			if (test_bit(usage->code, asc->pressed_fn))
-				do_translate = 1;
-			else if (trans->flags & APPLE_FLAG_FKEY)
-				do_translate = (fnmode == 2 && asc->fn_on) ||
-					(fnmode == 1 && !asc->fn_on);
-			else
-				do_translate = asc->fn_on;
-
-			if (do_translate) {
-				if (value)
-					set_bit(usage->code, asc->pressed_fn);
-				else
-					clear_bit(usage->code, asc->pressed_fn);
-
-				input_event(input, usage->type, trans->to,
-						value);
-
-				return 1;
+			if (test_bit(trans->from, input->key))
+				code = trans->from;
+			else if (test_bit(trans->to, input->key))
+				code = trans->to;
+
+			if (!code) {
+				if (trans->flags & APPLE_FLAG_FKEY) {
+					switch (fnmode) {
+					case 1:
+						do_translate = !asc->fn_on;
+						break;
+					case 2:
+						do_translate = asc->fn_on;
+						break;
+					default:
+						/* should never happen */
+						do_translate = false;
+					}
+				} else {
+					do_translate = asc->fn_on;
+				}
+
+				code = do_translate ? trans->to : trans->from;
 			}
+
+			input_event(input, usage->type, code, value);
+			return 1;
 		}
 
 		if (asc->quirks & APPLE_NUMLOCK_EMULATION &&
-- 
2.20.1

[PATCH AUTOSEL 4.19 17/33] PCI: rockchip: Propagate errors for optional regulators

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 0e3ff0ac5f71bdb6be2a698de0ed0c7e6e738269 ]

regulator_get_optional() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate data structures. Propagating only -EPROBE_DEFER is
problematic because it results in these legitimately fatal errors being
treated as "regulator not specified in DT".

What we really want is to ignore the optional regulators only if they
have not been specified in DT. regulator_get_optional() returns -ENODEV
in this case, so that's the special case that we need to handle. So we
propagate all errors, except -ENODEV, so that real failures will still
cause the driver to fail probe.

Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-rockchip-host.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
index 1372d270764f9..5ce8e63756875 100644
--- a/drivers/pci/controller/pcie-rockchip-host.c
+++ b/drivers/pci/controller/pcie-rockchip-host.c
@@ -608,29 +608,29 @@ static int rockchip_pcie_parse_host_dt(struct rockchip_pcie *rockchip)
 
 	rockchip->vpcie12v = devm_regulator_get_optional(dev, "vpcie12v");
 	if (IS_ERR(rockchip->vpcie12v)) {
-		if (PTR_ERR(rockchip->vpcie12v) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(rockchip->vpcie12v) != -ENODEV)
+			return PTR_ERR(rockchip->vpcie12v);
 		dev_info(dev, "no vpcie12v regulator found\n");
 	}
 
 	rockchip->vpcie3v3 = devm_regulator_get_optional(dev, "vpcie3v3");
 	if (IS_ERR(rockchip->vpcie3v3)) {
-		if (PTR_ERR(rockchip->vpcie3v3) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(rockchip->vpcie3v3) != -ENODEV)
+			return PTR_ERR(rockchip->vpcie3v3);
 		dev_info(dev, "no vpcie3v3 regulator found\n");
 	}
 
 	rockchip->vpcie1v8 = devm_regulator_get_optional(dev, "vpcie1v8");
 	if (IS_ERR(rockchip->vpcie1v8)) {
-		if (PTR_ERR(rockchip->vpcie1v8) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(rockchip->vpcie1v8) != -ENODEV)
+			return PTR_ERR(rockchip->vpcie1v8);
 		dev_info(dev, "no vpcie1v8 regulator found\n");
 	}
 
 	rockchip->vpcie0v9 = devm_regulator_get_optional(dev, "vpcie0v9");
 	if (IS_ERR(rockchip->vpcie0v9)) {
-		if (PTR_ERR(rockchip->vpcie0v9) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(rockchip->vpcie0v9) != -ENODEV)
+			return PTR_ERR(rockchip->vpcie0v9);
 		dev_info(dev, "no vpcie0v9 regulator found\n");
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 18/33] PCI: histb: Propagate errors for optional regulators

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 8f9e1641ba445437095411d9fda2324121110d5d ]

regulator_get_optional() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate data structures. Propagating only -EPROBE_DEFER is
problematic because it results in these legitimately fatal errors being
treated as "regulator not specified in DT".

What we really want is to ignore the optional regulators only if they
have not been specified in DT. regulator_get_optional() returns -ENODEV
in this case, so that's the special case that we need to handle. So we
propagate all errors, except -ENODEV, so that real failures will still
cause the driver to fail probe.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pcie-histb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-histb.c b/drivers/pci/controller/dwc/pcie-histb.c
index 7b32e619b959c..a3489839a8fc3 100644
--- a/drivers/pci/controller/dwc/pcie-histb.c
+++ b/drivers/pci/controller/dwc/pcie-histb.c
@@ -340,8 +340,8 @@ static int histb_pcie_probe(struct platform_device *pdev)
 
 	hipcie->vpcie = devm_regulator_get_optional(dev, "vpcie");
 	if (IS_ERR(hipcie->vpcie)) {
-		if (PTR_ERR(hipcie->vpcie) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(hipcie->vpcie) != -ENODEV)
+			return PTR_ERR(hipcie->vpcie);
 		hipcie->vpcie = NULL;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 19/33] PCI: imx6: Propagate errors for optional regulators

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 2170a09fb4b0f66e06e5bcdcbc98c9ccbf353650 ]

regulator_get_optional() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate data structures. Propagating only -EPROBE_DEFER is
problematic because it results in these legitimately fatal errors being
treated as "regulator not specified in DT".

What we really want is to ignore the optional regulators only if they
have not been specified in DT. regulator_get_optional() returns -ENODEV
in this case, so that's the special case that we need to handle. So we
propagate all errors, except -ENODEV, so that real failures will still
cause the driver to fail probe.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: kernel@pengutronix.de
Cc: linux-imx@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-imx6.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 3826b444298c1..3b2ceb5667289 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -807,8 +807,8 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 
 	imx6_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
 	if (IS_ERR(imx6_pcie->vpcie)) {
-		if (PTR_ERR(imx6_pcie->vpcie) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(imx6_pcie->vpcie) != -ENODEV)
+			return PTR_ERR(imx6_pcie->vpcie);
 		imx6_pcie->vpcie = NULL;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 20/33] PCI: exynos: Propagate errors for optional PHYs

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit ddd6960087d4b45759434146d681a94bbb1c54ad ]

devm_of_phy_get() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate devres structures. Propagating only -EPROBE_DEFER
is problematic because it results in these legitimately fatal errors
being treated as "PHY not specified in DT".

What we really want is to ignore the optional PHYs only if they have not
been specified in DT. devm_of_phy_get() returns -ENODEV in this case, so
that's the special case that we need to handle. So we propagate all
errors, except -ENODEV, so that real failures will still cause the
driver to fail probe.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-exynos.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-exynos.c b/drivers/pci/controller/dwc/pci-exynos.c
index cee5f2f590e2d..14a6ba4067fbe 100644
--- a/drivers/pci/controller/dwc/pci-exynos.c
+++ b/drivers/pci/controller/dwc/pci-exynos.c
@@ -465,7 +465,7 @@ static int __init exynos_pcie_probe(struct platform_device *pdev)
 
 	ep->phy = devm_of_phy_get(dev, np, NULL);
 	if (IS_ERR(ep->phy)) {
-		if (PTR_ERR(ep->phy) == -EPROBE_DEFER)
+		if (PTR_ERR(ep->phy) != -ENODEV)
 			return PTR_ERR(ep->phy);
 
 		ep->phy = NULL;
-- 
2.20.1

[PATCH AUTOSEL 4.19 21/33] security: smack: Fix possible null-pointer dereferences in smack_socket_sock_rcv_skb()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 3f4287e7d98a2954f20bf96c567fdffcd2b63eb9 ]

In smack_socket_sock_rcv_skb(), there is an if statement
on line 3920 to check whether skb is NULL:
    if (skb && skb->secmark != 0)

This check indicates skb can be NULL in some cases.

But on lines 3931 and 3932, skb is used:
    ad.a.u.net->netif = skb->skb_iif;
    ipv6_skb_to_auditdata(skb, &ad.a, NULL);

Thus, possible null-pointer dereferences may occur when skb is NULL.

To fix these possible bugs, an if statement is added to check skb.

These bugs are found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/smack/smack_lsm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 017c47eb795eb..120bd56e5d89e 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -4005,6 +4005,8 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 			skp = smack_ipv6host_label(&sadd);
 		if (skp == NULL)
 			skp = smack_net_ambient;
+		if (skb == NULL)
+			break;
 #ifdef CONFIG_AUDIT
 		smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
 		ad.a.u.net->family = family;
-- 
2.20.1

[PATCH AUTOSEL 4.19 22/33] ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address

[Sasha Levin]

From: Mike Rapoport <mike.rapoport@gmail.com>

[ Upstream commit 00d2ec1e6bd82c0538e6dd3e4a4040de93ba4fef ]

The calculation of memblock_limit in adjust_lowmem_bounds() assumes that
bank 0 starts from a PMD-aligned address. However, the beginning of the
first bank may be NOMAP memory and the start of usable memory
will be not aligned to PMD boundary. In such case the memblock_limit will
be set to the end of the NOMAP region, which will prevent any memblock
allocations.

Mark the region between the end of the NOMAP area and the next PMD-aligned
address as NOMAP as well, so that the usable memory will start at
PMD-aligned address.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/mmu.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e46a6a446cdd2..70e560cf8ca03 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1175,6 +1175,22 @@ void __init adjust_lowmem_bounds(void)
 	 */
 	vmalloc_limit = (u64)(uintptr_t)vmalloc_min - PAGE_OFFSET + PHYS_OFFSET;
 
+	/*
+	 * The first usable region must be PMD aligned. Mark its start
+	 * as MEMBLOCK_NOMAP if it isn't
+	 */
+	for_each_memblock(memory, reg) {
+		if (!memblock_is_nomap(reg)) {
+			if (!IS_ALIGNED(reg->base, PMD_SIZE)) {
+				phys_addr_t len;
+
+				len = round_up(reg->base, PMD_SIZE) - reg->base;
+				memblock_mark_nomap(reg->base, len);
+			}
+			break;
+		}
+	}
+
 	for_each_memblock(memory, reg) {
 		phys_addr_t block_start = reg->base;
 		phys_addr_t block_end = reg->base + reg->size;
-- 
2.20.1

[PATCH AUTOSEL 4.19 23/33] fat: work around race with userspace's read via blockdev while mounting

[Sasha Levin]

From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

[ Upstream commit 07bfa4415ab607e459b69bd86aa7e7602ce10b4f ]

If userspace reads the buffer via blockdev while mounting,
sb_getblk()+modify can race with buffer read via blockdev.

For example,

            FS                               userspace
    bh = sb_getblk()
    modify bh->b_data
                                  read
				    ll_rw_block(bh)
				      fill bh->b_data by on-disk data
				      /* lost modified data by FS */
				      set_buffer_uptodate(bh)
    set_buffer_uptodate(bh)

Userspace should not use the blockdev while mounting though, the udev
seems to be already doing this.  Although I think the udev should try to
avoid this, workaround the race by small overhead.

Link: http://lkml.kernel.org/r/87pnk7l3sw.fsf_-_@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fat/dir.c    | 13 +++++++++++--
 fs/fat/fatent.c |  3 +++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 7f5f3699fc6c0..de60c05c0ca1d 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -1097,8 +1097,11 @@ static int fat_zeroed_cluster(struct inode *dir, sector_t blknr, int nr_used,
 			err = -ENOMEM;
 			goto error;
 		}
+		/* Avoid race with userspace read via bdev */
+		lock_buffer(bhs[n]);
 		memset(bhs[n]->b_data, 0, sb->s_blocksize);
 		set_buffer_uptodate(bhs[n]);
+		unlock_buffer(bhs[n]);
 		mark_buffer_dirty_inode(bhs[n], dir);
 
 		n++;
@@ -1155,6 +1158,8 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec64 *ts)
 	fat_time_unix2fat(sbi, ts, &time, &date, &time_cs);
 
 	de = (struct msdos_dir_entry *)bhs[0]->b_data;
+	/* Avoid race with userspace read via bdev */
+	lock_buffer(bhs[0]);
 	/* filling the new directory slots ("." and ".." entries) */
 	memcpy(de[0].name, MSDOS_DOT, MSDOS_NAME);
 	memcpy(de[1].name, MSDOS_DOTDOT, MSDOS_NAME);
@@ -1177,6 +1182,7 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec64 *ts)
 	de[0].size = de[1].size = 0;
 	memset(de + 2, 0, sb->s_blocksize - 2 * sizeof(*de));
 	set_buffer_uptodate(bhs[0]);
+	unlock_buffer(bhs[0]);
 	mark_buffer_dirty_inode(bhs[0], dir);
 
 	err = fat_zeroed_cluster(dir, blknr, 1, bhs, MAX_BUF_PER_PAGE);
@@ -1234,11 +1240,14 @@ static int fat_add_new_entries(struct inode *dir, void *slots, int nr_slots,
 
 			/* fill the directory entry */
 			copy = min(size, sb->s_blocksize);
+			/* Avoid race with userspace read via bdev */
+			lock_buffer(bhs[n]);
 			memcpy(bhs[n]->b_data, slots, copy);
-			slots += copy;
-			size -= copy;
 			set_buffer_uptodate(bhs[n]);
+			unlock_buffer(bhs[n]);
 			mark_buffer_dirty_inode(bhs[n], dir);
+			slots += copy;
+			size -= copy;
 			if (!size)
 				break;
 			n++;
diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c
index f58c0cacc531d..4c6c635bc8aaa 100644
--- a/fs/fat/fatent.c
+++ b/fs/fat/fatent.c
@@ -390,8 +390,11 @@ static int fat_mirror_bhs(struct super_block *sb, struct buffer_head **bhs,
 				err = -ENOMEM;
 				goto error;
 			}
+			/* Avoid race with userspace read via bdev */
+			lock_buffer(c_bh);
 			memcpy(c_bh->b_data, bhs[n]->b_data, sb->s_blocksize);
 			set_buffer_uptodate(c_bh);
+			unlock_buffer(c_bh);
 			mark_buffer_dirty_inode(c_bh, sbi->fat_inode);
 			if (sb->s_flags & SB_SYNCHRONOUS)
 				err = sync_dirty_buffer(c_bh);
-- 
2.20.1

[PATCH AUTOSEL 4.19 24/33] pktcdvd: remove warning on attempting to register non-passthrough dev

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit eb09b3cc464d2c3bbde9a6648603c8d599ea8582 ]

Anatoly reports that he gets the below warning when booting -git on
a sparc64 box on debian unstable:

...
[   13.352975] aes_sparc64: Using sparc64 aes opcodes optimized AES
implementation
[   13.428002] ------------[ cut here ]------------
[   13.428081] WARNING: CPU: 21 PID: 586 at
drivers/block/pktcdvd.c:2597 pkt_setup_dev+0x2e4/0x5a0 [pktcdvd]
[   13.428147] Attempt to register a non-SCSI queue
[   13.428184] Modules linked in: pktcdvd libdes cdrom aes_sparc64
n2_rng md5_sparc64 sha512_sparc64 rng_core sha256_sparc64 flash
sha1_sparc64 ip_tables x_tables ipv6 crc_ccitt nf_defrag_ipv6 autofs4
ext4 crc16 mbcache jbd2 raid10 raid456 async_raid6_recov async_memcpy
async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear
md_mod crc32c_sparc64
[   13.428452] CPU: 21 PID: 586 Comm: pktsetup Not tainted
5.3.0-10169-g574cc4539762 #1234
[   13.428507] Call Trace:
[   13.428542]  [00000000004635c0] __warn+0xc0/0x100
[   13.428582]  [0000000000463634] warn_slowpath_fmt+0x34/0x60
[   13.428626]  [000000001045b244] pkt_setup_dev+0x2e4/0x5a0 [pktcdvd]
[   13.428674]  [000000001045ccf4] pkt_ctl_ioctl+0x94/0x220 [pktcdvd]
[   13.428724]  [00000000006b95c8] do_vfs_ioctl+0x628/0x6e0
[   13.428764]  [00000000006b96c8] ksys_ioctl+0x48/0x80
[   13.428803]  [00000000006b9714] sys_ioctl+0x14/0x40
[   13.428847]  [0000000000406294] linux_sparc_syscall+0x34/0x44
[   13.428890] irq event stamp: 4181
[   13.428924] hardirqs last  enabled at (4189): [<00000000004e0a74>]
console_unlock+0x634/0x6c0
[   13.428984] hardirqs last disabled at (4196): [<00000000004e0540>]
console_unlock+0x100/0x6c0
[   13.429048] softirqs last  enabled at (3978): [<0000000000b2e2d8>]
__do_softirq+0x498/0x520
[   13.429110] softirqs last disabled at (3967): [<000000000042cfb4>]
do_softirq_own_stack+0x34/0x60
[   13.429172] ---[ end trace 2220ca468f32967d ]---
[   13.430018] pktcdvd: setup of pktcdvd device failed
[   13.455589] des_sparc64: Using sparc64 des opcodes optimized DES
implementation
[   13.515334] camellia_sparc64: Using sparc64 camellia opcodes
optimized CAMELLIA implementation
[   13.522856] pktcdvd: setup of pktcdvd device failed
[   13.529327] pktcdvd: setup of pktcdvd device failed
[   13.532932] pktcdvd: setup of pktcdvd device failed
[   13.536165] pktcdvd: setup of pktcdvd device failed
[   13.539372] pktcdvd: setup of pktcdvd device failed
[   13.542834] pktcdvd: setup of pktcdvd device failed
[   13.546536] pktcdvd: setup of pktcdvd device failed
[   15.431071] XFS (dm-0): Mounting V5 Filesystem
...

Apparently debian auto-attaches any cdrom like device to pktcdvd, which
can lead to the above warning. There's really no reason to warn for this
situation, kill it.

Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/pktcdvd.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 6f1d25c1eb640..0bc344d22f013 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -2596,7 +2596,6 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev)
 	if (ret)
 		return ret;
 	if (!blk_queue_scsi_passthrough(bdev_get_queue(bdev))) {
-		WARN_ONCE(true, "Attempt to register a non-SCSI queue\n");
 		blkdev_put(bdev, FMODE_READ | FMODE_NDELAY);
 		return -EINVAL;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 25/33] hypfs: Fix error number left in struct pointer member

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit b54c64f7adeb241423cd46598f458b5486b0375e ]

In hypfs_fill_super(), if hypfs_create_update_file() fails,
sbi->update_file is left holding an error number.  This is passed to
hypfs_kill_super() which doesn't check for this.

Fix this by not setting sbi->update_value until after we've checked for
error.

Fixes: 24bbb1faf3f0 ("[PATCH] s390_hypfs filesystem")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
cc: Heiko Carstens <heiko.carstens@de.ibm.com>
cc: linux-s390@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/hypfs/inode.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index c681329fdeec6..e4d17d9ea93d8 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -269,7 +269,7 @@ static int hypfs_show_options(struct seq_file *s, struct dentry *root)
 static int hypfs_fill_super(struct super_block *sb, void *data, int silent)
 {
 	struct inode *root_inode;
-	struct dentry *root_dentry;
+	struct dentry *root_dentry, *update_file;
 	int rc = 0;
 	struct hypfs_sb_info *sbi;
 
@@ -300,9 +300,10 @@ static int hypfs_fill_super(struct super_block *sb, void *data, int silent)
 		rc = hypfs_diag_create_files(root_dentry);
 	if (rc)
 		return rc;
-	sbi->update_file = hypfs_create_update_file(root_dentry);
-	if (IS_ERR(sbi->update_file))
-		return PTR_ERR(sbi->update_file);
+	update_file = hypfs_create_update_file(root_dentry);
+	if (IS_ERR(update_file))
+		return PTR_ERR(update_file);
+	sbi->update_file = update_file;
 	hypfs_update_update(sb);
 	pr_info("Hypervisor filesystem mounted\n");
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 26/33] crypto: hisilicon - Fix double free in sec_free_hw_sgl()

[Sasha Levin]

From: Yunfeng Ye <yeyunfeng@huawei.com>

[ Upstream commit 24fbf7bad888767bed952f540ac963bc57e47e15 ]

There are two problems in sec_free_hw_sgl():

First, when sgl_current->next is valid, @hw_sgl will be freed in the
first loop, but it free again after the loop.

Second, sgl_current and sgl_current->next_sgl is not match when
dma_pool_free() is invoked, the third parameter should be the dma
address of sgl_current, but sgl_current->next_sgl is the dma address
of next chain, so use sgl_current->next_sgl is wrong.

Fix this by deleting the last dma_pool_free() in sec_free_hw_sgl(),
modifying the condition for while loop, and matching the address for
dma_pool_free().

Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/hisilicon/sec/sec_algs.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec/sec_algs.c b/drivers/crypto/hisilicon/sec/sec_algs.c
index cdc4f9a171d98..db2983c51f1e6 100644
--- a/drivers/crypto/hisilicon/sec/sec_algs.c
+++ b/drivers/crypto/hisilicon/sec/sec_algs.c
@@ -215,17 +215,18 @@ static void sec_free_hw_sgl(struct sec_hw_sgl *hw_sgl,
 			    dma_addr_t psec_sgl, struct sec_dev_info *info)
 {
 	struct sec_hw_sgl *sgl_current, *sgl_next;
+	dma_addr_t sgl_next_dma;
 
-	if (!hw_sgl)
-		return;
 	sgl_current = hw_sgl;
-	while (sgl_current->next) {
+	while (sgl_current) {
 		sgl_next = sgl_current->next;
-		dma_pool_free(info->hw_sgl_pool, sgl_current,
-			      sgl_current->next_sgl);
+		sgl_next_dma = sgl_current->next_sgl;
+
+		dma_pool_free(info->hw_sgl_pool, sgl_current, psec_sgl);
+
 		sgl_current = sgl_next;
+		psec_sgl = sgl_next_dma;
 	}
-	dma_pool_free(info->hw_sgl_pool, hw_sgl, psec_sgl);
 }
 
 static int sec_alg_skcipher_setkey(struct crypto_skcipher *tfm,
-- 
2.20.1

[PATCH AUTOSEL 4.19 27/33] kbuild: clean compressed initramfs image

[Sasha Levin]

From: Greg Thelen <gthelen@google.com>

[ Upstream commit 6279eb3dd7946c69346a3b98473ed13d3a44adb5 ]

Since 9e3596b0c653 ("kbuild: initramfs cleanup, set target from Kconfig")
"make clean" leaves behind compressed initramfs images.  Example:

  $ make defconfig
  $ sed -i 's|CONFIG_INITRAMFS_SOURCE=""|CONFIG_INITRAMFS_SOURCE="/tmp/ir.cpio"|' .config
  $ make olddefconfig
  $ make -s
  $ make -s clean
  $ git clean -ndxf | grep initramfs
  Would remove usr/initramfs_data.cpio.gz

clean rules do not have CONFIG_* context so they do not know which
compression format was used.  Thus they don't know which files to delete.

Tell clean to delete all possible compression formats.

Once patched usr/initramfs_data.cpio.gz and friends are deleted by
"make clean".

Link: http://lkml.kernel.org/r/20190722063251.55541-1-gthelen@google.com
Fixes: 9e3596b0c653 ("kbuild: initramfs cleanup, set target from Kconfig")
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 usr/Makefile | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/usr/Makefile b/usr/Makefile
index 748f6a60bb1e0..138c18cefb529 100644
--- a/usr/Makefile
+++ b/usr/Makefile
@@ -11,6 +11,9 @@ datafile_y = initramfs_data.cpio$(suffix_y)
 datafile_d_y = .$(datafile_y).d
 AFLAGS_initramfs_data.o += -DINITRAMFS_IMAGE="usr/$(datafile_y)"
 
+# clean rules do not have CONFIG_INITRAMFS_COMPRESSION.  So clean up after all
+# possible compression formats.
+clean-files += initramfs_data.cpio*
 
 # Generate builtin.o based on initramfs_data.o
 obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data.o
-- 
2.20.1

[PATCH AUTOSEL 4.19 28/33] ocfs2: wait for recovering done after direct unlock request

[Sasha Levin]

From: Changwei Ge <gechangwei@live.cn>

[ Upstream commit 0a3775e4f883912944481cf2ef36eb6383a9cc74 ]

There is a scenario causing ocfs2 umount hang when multiple hosts are
rebooting at the same time.

NODE1                           NODE2               NODE3
send unlock requset to NODE2
                                dies
                                                    become recovery master
                                                    recover NODE2
find NODE2 dead
mark resource RECOVERING
directly remove lock from grant list
calculate usage but RECOVERING marked
**miss the window of purging
clear RECOVERING

To reproduce this issue, crash a host and then umount ocfs2
from another node.

To solve this, just let unlock progress wait for recovery done.

Link: http://lkml.kernel.org/r/1550124866-20367-1-git-send-email-gechangwei@live.cn
Signed-off-by: Changwei Ge <gechangwei@live.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/dlm/dlmunlock.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/fs/ocfs2/dlm/dlmunlock.c b/fs/ocfs2/dlm/dlmunlock.c
index 63d701cd1e2e7..c8e9b7031d9ad 100644
--- a/fs/ocfs2/dlm/dlmunlock.c
+++ b/fs/ocfs2/dlm/dlmunlock.c
@@ -105,7 +105,8 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 	enum dlm_status status;
 	int actions = 0;
 	int in_use;
-        u8 owner;
+	u8 owner;
+	int recovery_wait = 0;
 
 	mlog(0, "master_node = %d, valblk = %d\n", master_node,
 	     flags & LKM_VALBLK);
@@ -208,9 +209,12 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 		}
 		if (flags & LKM_CANCEL)
 			lock->cancel_pending = 0;
-		else
-			lock->unlock_pending = 0;
-
+		else {
+			if (!lock->unlock_pending)
+				recovery_wait = 1;
+			else
+				lock->unlock_pending = 0;
+		}
 	}
 
 	/* get an extra ref on lock.  if we are just switching
@@ -244,6 +248,17 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 	spin_unlock(&res->spinlock);
 	wake_up(&res->wq);
 
+	if (recovery_wait) {
+		spin_lock(&res->spinlock);
+		/* Unlock request will directly succeed after owner dies,
+		 * and the lock is already removed from grant list. We have to
+		 * wait for RECOVERING done or we miss the chance to purge it
+		 * since the removement is much faster than RECOVERING proc.
+		 */
+		__dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_RECOVERING);
+		spin_unlock(&res->spinlock);
+	}
+
 	/* let the caller's final dlm_lock_put handle the actual kfree */
 	if (actions & DLM_UNLOCK_FREE_LOCK) {
 		/* this should always be coupled with list removal */
-- 
2.20.1

[PATCH AUTOSEL 4.19 29/33] kmemleak: increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE default to 16K

[Sasha Levin]

From: Nicolas Boichat <drinkcat@chromium.org>

[ Upstream commit b751c52bb587ae66f773b15204ef7a147467f4c7 ]

The current default value (400) is too low on many systems (e.g.  some
ARM64 platform takes up 1000+ entries).

syzbot uses 16000 as default value, and has proved to be enough on beefy
configurations, so let's pick that value.

This consumes more RAM on boot (each entry is 160 bytes, so in total
~2.5MB of RAM), but the memory would later be freed (early_log is
__initdata).

Link: http://lkml.kernel.org/r/20190730154027.101525-1-drinkcat@chromium.org
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/Kconfig.debug | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 3dea52f7be9c1..46a910acce3f0 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -570,7 +570,7 @@ config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
 	int "Maximum kmemleak early log entries"
 	depends on DEBUG_KMEMLEAK
 	range 200 40000
-	default 400
+	default 16000
 	help
 	  Kmemleak must track all the memory allocations to avoid
 	  reporting false positives. Since memory may be allocated or
-- 
2.20.1

[PATCH AUTOSEL 4.19 30/33] arm64: consider stack randomization for mmap base only when necessary

[Sasha Levin]

From: Alexandre Ghiti <alex@ghiti.fr>

[ Upstream commit e8d54b62c55ab6201de6d195fc2c276294c1f6ae ]

Do not offset mmap base address because of stack randomization if current
task does not want randomization.  Note that x86 already implements this
behaviour.

Link: http://lkml.kernel.org/r/20190730055113.23635-4-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/mm/mmap.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c
index 842c8a5fcd53c..157f2caa13516 100644
--- a/arch/arm64/mm/mmap.c
+++ b/arch/arm64/mm/mmap.c
@@ -65,7 +65,11 @@ unsigned long arch_mmap_rnd(void)
 static unsigned long mmap_base(unsigned long rnd, struct rlimit *rlim_stack)
 {
 	unsigned long gap = rlim_stack->rlim_cur;
-	unsigned long pad = (STACK_RND_MASK << PAGE_SHIFT) + stack_guard_gap;
+	unsigned long pad = stack_guard_gap;
+
+	/* Account for stack randomization if necessary */
+	if (current->flags & PF_RANDOMIZE)
+		pad += (STACK_RND_MASK << PAGE_SHIFT);
 
 	/* Values close to RLIM_INFINITY can overflow. */
 	if (gap + pad > gap)
-- 
2.20.1

[PATCH AUTOSEL 4.19 31/33] mips: properly account for stack randomization and stack guard gap

[Sasha Levin]

From: Alexandre Ghiti <alex@ghiti.fr>

[ Upstream commit b1f61b5bde3a1f50392c97b4c8513d1b8efb1cf2 ]

This commit takes care of stack randomization and stack guard gap when
computing mmap base address and checks if the task asked for
randomization.  This fixes the problem uncovered and not fixed for arm
here: https://lkml.kernel.org/r/20170622200033.25714-1-riel@redhat.com

Link: http://lkml.kernel.org/r/20190730055113.23635-10-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/mm/mmap.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c
index 1b705fb2f10c4..233033f99d8fc 100644
--- a/arch/mips/mm/mmap.c
+++ b/arch/mips/mm/mmap.c
@@ -21,8 +21,9 @@ unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
 EXPORT_SYMBOL(shm_align_mask);
 
 /* gap between mmap and stack */
-#define MIN_GAP (128*1024*1024UL)
-#define MAX_GAP ((TASK_SIZE)/6*5)
+#define MIN_GAP		(128*1024*1024UL)
+#define MAX_GAP		((TASK_SIZE)/6*5)
+#define STACK_RND_MASK	(0x7ff >> (PAGE_SHIFT - 12))
 
 static int mmap_is_legacy(struct rlimit *rlim_stack)
 {
@@ -38,6 +39,15 @@ static int mmap_is_legacy(struct rlimit *rlim_stack)
 static unsigned long mmap_base(unsigned long rnd, struct rlimit *rlim_stack)
 {
 	unsigned long gap = rlim_stack->rlim_cur;
+	unsigned long pad = stack_guard_gap;
+
+	/* Account for stack randomization if necessary */
+	if (current->flags & PF_RANDOMIZE)
+		pad += (STACK_RND_MASK << PAGE_SHIFT);
+
+	/* Values close to RLIM_INFINITY can overflow. */
+	if (gap + pad > gap)
+		gap += pad;
 
 	if (gap < MIN_GAP)
 		gap = MIN_GAP;
-- 
2.20.1

[PATCH AUTOSEL 4.19 32/33] arm: properly account for stack randomization and stack guard gap

[Sasha Levin]

From: Alexandre Ghiti <alex@ghiti.fr>

[ Upstream commit af0f4297286f13a75edf93677b1fb2fc16c412a7 ]

This commit takes care of stack randomization and stack guard gap when
computing mmap base address and checks if the task asked for
randomization.  This fixes the problem uncovered and not fixed for arm
here: https://lkml.kernel.org/r/20170622200033.25714-1-riel@redhat.com

Link: http://lkml.kernel.org/r/20190730055113.23635-7-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/mmap.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index f866870db749c..bff3d00bda5be 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -18,8 +18,9 @@
 	 (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1)))
 
 /* gap between mmap and stack */
-#define MIN_GAP (128*1024*1024UL)
-#define MAX_GAP ((TASK_SIZE)/6*5)
+#define MIN_GAP		(128*1024*1024UL)
+#define MAX_GAP		((TASK_SIZE)/6*5)
+#define STACK_RND_MASK	(0x7ff >> (PAGE_SHIFT - 12))
 
 static int mmap_is_legacy(struct rlimit *rlim_stack)
 {
@@ -35,6 +36,15 @@ static int mmap_is_legacy(struct rlimit *rlim_stack)
 static unsigned long mmap_base(unsigned long rnd, struct rlimit *rlim_stack)
 {
 	unsigned long gap = rlim_stack->rlim_cur;
+	unsigned long pad = stack_guard_gap;
+
+	/* Account for stack randomization if necessary */
+	if (current->flags & PF_RANDOMIZE)
+		pad += (STACK_RND_MASK << PAGE_SHIFT);
+
+	/* Values close to RLIM_INFINITY can overflow. */
+	if (gap + pad > gap)
+		gap += pad;
 
 	if (gap < MIN_GAP)
 		gap = MIN_GAP;
-- 
2.20.1

[PATCH AUTOSEL 4.19 33/33] arm: use STACK_TOP when computing mmap base address

[Sasha Levin]

From: Alexandre Ghiti <alex@ghiti.fr>

[ Upstream commit 86e568e9c0525fc40e76d827212d5e9721cf7504 ]

mmap base address must be computed wrt stack top address, using TASK_SIZE
is wrong since STACK_TOP and TASK_SIZE are not equivalent.

Link: http://lkml.kernel.org/r/20190730055113.23635-8-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/mmap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index bff3d00bda5be..0b94b674aa91f 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -19,7 +19,7 @@
 
 /* gap between mmap and stack */
 #define MIN_GAP		(128*1024*1024UL)
-#define MAX_GAP		((TASK_SIZE)/6*5)
+#define MAX_GAP		((STACK_TOP)/6*5)
 #define STACK_RND_MASK	(0x7ff >> (PAGE_SHIFT - 12))
 
 static int mmap_is_legacy(struct rlimit *rlim_stack)
@@ -51,7 +51,7 @@ static unsigned long mmap_base(unsigned long rnd, struct rlimit *rlim_stack)
 	else if (gap > MAX_GAP)
 		gap = MAX_GAP;
 
-	return PAGE_ALIGN(TASK_SIZE - gap - rnd);
+	return PAGE_ALIGN(STACK_TOP - gap - rnd);
 }
 
 /*
-- 
2.20.1

Re: [PATCH AUTOSEL 4.19 12/33] MIPS: lantiq: update the clock alias' for the mainline PCIe PHY driver

[Martin Blumenstingl]

Hi Sasha,

On Sun, Sep 29, 2019 at 7:34 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>
> [ Upstream commit ed90302be64a53d9031c8ce05428c358b16a5d96 ]
>
> The mainline PCIe PHY driver has it's own devicetree node. Update the
> clock alias so the mainline driver finds the clocks.
the mainline PCIe PHY driver only made it into Linux 5.4
I am pointing this out because OpenWrt uses an out-of-tree PCIe driver
with Linux 4.19 and this patch will break that if we don't do
additional work there

thus I would like to understand why this got queued as backport for
various -stable kernels


Martin

Re: [PATCH AUTOSEL 4.19 12/33] MIPS: lantiq: update the clock alias' for the mainline PCIe PHY driver

[Sasha Levin]

On Sun, Sep 29, 2019 at 07:40:28PM +0200, Martin Blumenstingl wrote:
>Hi Sasha,
>
>On Sun, Sep 29, 2019 at 7:34 PM Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>>
>> [ Upstream commit ed90302be64a53d9031c8ce05428c358b16a5d96 ]
>>
>> The mainline PCIe PHY driver has it's own devicetree node. Update the
>> clock alias so the mainline driver finds the clocks.
>the mainline PCIe PHY driver only made it into Linux 5.4
>I am pointing this out because OpenWrt uses an out-of-tree PCIe driver
>with Linux 4.19 and this patch will break that if we don't do
>additional work there
>
>thus I would like to understand why this got queued as backport for
>various -stable kernels

It went through the automatic selection process, where we attempt to
identify fixes that were not tagged for stable.

I've dropped this patch from all stable trees, thank you.

-- 
Thanks,
Sasha