[PATCH 3/3] PCI: pciehp: Add dmi table for in-band presence disabled

[Stuart Hayes <stuart.w.hayes@gmail.com>]

Some systems have in-band presence detection disabled for hot-plug PCI slots,
but do not report this in the slot capabilities 2 (SLTCAP2) register.  On
these systems, presence detect can become active well after the link is
reported to be active, which can cause the slots to be disabled after a
device is connected.

Add a dmi table to flag these systems as having in-band presence disabled.

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
---
 drivers/pci/hotplug/pciehp_hpc.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 1282641c6458..1dd01e752587 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -14,6 +14,7 @@
 
 #define dev_fmt(fmt) "pciehp: " fmt
 
+#include <linux/dmi.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/jiffies.h>
@@ -26,6 +27,16 @@
 #include "../pci.h"
 #include "pciehp.h"
 
+static const struct dmi_system_id inband_presence_disabled_dmi_table[] = {
+	{
+		.ident = "Dell System",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+		},
+	},
+	{}
+};
+
 static inline struct pci_dev *ctrl_dev(struct controller *ctrl)
 {
 	return ctrl->pcie->port;
@@ -898,6 +909,9 @@ struct controller *pcie_init(struct pcie_device *dev)
 		ctrl->inband_presence_disabled = 1;
 	}
 
+	if (dmi_first_match(inband_presence_disabled_dmi_table))
+		ctrl->inband_presence_disabled = 1;
+
 	/*
 	 * If empty slot's power status is on, turn power off.  The IRQ isn't
 	 * requested yet, so avoid triggering a notification with this command.
-- 
2.18.1