linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joel Fernandes <joel@joelfernandes.org>
To: "Viktor Rosendahl (BMW)" <viktor.rosendahl@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>,
	Ingo Molnar <mingo@redhat.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 2/4] preemptirq_delay_test: Add the burst feature and a sysfs trigger
Date: Tue, 1 Oct 2019 20:43:33 -0400	[thread overview]
Message-ID: <20191002004333.GB161396@google.com> (raw)
In-Reply-To: <20190920152219.12920-3-viktor.rosendahl@gmail.com>

On Fri, Sep 20, 2019 at 05:22:17PM +0200, Viktor Rosendahl (BMW) wrote:
> This burst feature enables the user to generate a burst of
> preempt/irqsoff latencies. This makes it possible to test whether we
> are able to detect latencies that systematically occur very close to
> each other.
> 
> The maximum burst size is 10. We also create 10 identical test
> functions, so that we get 10 different backtraces; this is useful
> when we want to test whether we can detect all the latencies in a
> burst. Otherwise, there would be no easy way of differentiating
> between which latency in a burst was captured by the tracer.
> 
> In addition, there is a sysfs trigger, so that it's not necessary to
> reload the module to repeat the test. The trigger will appear as
> /sys/kernel/preemptirq_delay_test/trigger in sysfs.
> 
> Signed-off-by: Viktor Rosendahl (BMW) <viktor.rosendahl@gmail.com>

Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>

thanks,

 - Joel


> ---
>  kernel/trace/Kconfig                 |   6 +-
>  kernel/trace/preemptirq_delay_test.c | 144 +++++++++++++++++++++++----
>  2 files changed, 128 insertions(+), 22 deletions(-)
> 
> diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
> index e08527f50d2a..2a58380ea310 100644
> --- a/kernel/trace/Kconfig
> +++ b/kernel/trace/Kconfig
> @@ -752,9 +752,9 @@ config PREEMPTIRQ_DELAY_TEST
>  	  configurable delay. The module busy waits for the duration of the
>  	  critical section.
>  
> -	  For example, the following invocation forces a one-time irq-disabled
> -	  critical section for 500us:
> -	  modprobe preemptirq_delay_test test_mode=irq delay=500000
> +	  For example, the following invocation generates a burst of three
> +	  irq-disabled critical sections for 500us:
> +	  modprobe preemptirq_delay_test test_mode=irq delay=500 burst_size=3
>  
>  	  If unsure, say N
>  
> diff --git a/kernel/trace/preemptirq_delay_test.c b/kernel/trace/preemptirq_delay_test.c
> index d8765c952fab..31c0fad4cb9e 100644
> --- a/kernel/trace/preemptirq_delay_test.c
> +++ b/kernel/trace/preemptirq_delay_test.c
> @@ -10,18 +10,25 @@
>  #include <linux/interrupt.h>
>  #include <linux/irq.h>
>  #include <linux/kernel.h>
> +#include <linux/kobject.h>
>  #include <linux/kthread.h>
>  #include <linux/module.h>
>  #include <linux/printk.h>
>  #include <linux/string.h>
> +#include <linux/sysfs.h>
>  
>  static ulong delay = 100;
> -static char test_mode[10] = "irq";
> +static char test_mode[12] = "irq";
> +static uint burst_size = 1;
>  
> -module_param_named(delay, delay, ulong, S_IRUGO);
> -module_param_string(test_mode, test_mode, 10, S_IRUGO);
> -MODULE_PARM_DESC(delay, "Period in microseconds (100 uS default)");
> -MODULE_PARM_DESC(test_mode, "Mode of the test such as preempt or irq (default irq)");
> +module_param_named(delay, delay, ulong, 0444);
> +module_param_string(test_mode, test_mode, 12, 0444);
> +module_param_named(burst_size, burst_size, uint, 0444);
> +MODULE_PARM_DESC(delay, "Period in microseconds (100 us default)");
> +MODULE_PARM_DESC(test_mode, "Mode of the test such as preempt, irq, or alternate (default irq)");
> +MODULE_PARM_DESC(burst_size, "The size of a burst (default 1)");
> +
> +#define MIN(x, y) ((x) < (y) ? (x) : (y))
>  
>  static void busy_wait(ulong time)
>  {
> @@ -34,37 +41,136 @@ static void busy_wait(ulong time)
>  	} while ((end - start) < (time * 1000));
>  }
>  
> -static int preemptirq_delay_run(void *data)
> +static __always_inline void irqoff_test(void)
>  {
>  	unsigned long flags;
> +	local_irq_save(flags);
> +	busy_wait(delay);
> +	local_irq_restore(flags);
> +}
>  
> -	if (!strcmp(test_mode, "irq")) {
> -		local_irq_save(flags);
> -		busy_wait(delay);
> -		local_irq_restore(flags);
> -	} else if (!strcmp(test_mode, "preempt")) {
> -		preempt_disable();
> -		busy_wait(delay);
> -		preempt_enable();
> +static __always_inline void preemptoff_test(void)
> +{
> +	preempt_disable();
> +	busy_wait(delay);
> +	preempt_enable();
> +}
> +
> +static void execute_preemptirqtest(int idx)
> +{
> +	if (!strcmp(test_mode, "irq"))
> +		irqoff_test();
> +	else if (!strcmp(test_mode, "preempt"))
> +		preemptoff_test();
> +	else if (!strcmp(test_mode, "alternate")) {
> +		if (idx % 2 == 0)
> +			irqoff_test();
> +		else
> +			preemptoff_test();
>  	}
> +}
> +
> +#define DECLARE_TESTFN(POSTFIX)				\
> +	static void preemptirqtest_##POSTFIX(int idx)	\
> +	{						\
> +		execute_preemptirqtest(idx);		\
> +	}						\
>  
> +/*
> + * We create 10 different functions, so that we can get 10 different
> + * backtraces.
> + */
> +DECLARE_TESTFN(0)
> +DECLARE_TESTFN(1)
> +DECLARE_TESTFN(2)
> +DECLARE_TESTFN(3)
> +DECLARE_TESTFN(4)
> +DECLARE_TESTFN(5)
> +DECLARE_TESTFN(6)
> +DECLARE_TESTFN(7)
> +DECLARE_TESTFN(8)
> +DECLARE_TESTFN(9)
> +
> +static void (*testfuncs[])(int)  = {
> +	preemptirqtest_0,
> +	preemptirqtest_1,
> +	preemptirqtest_2,
> +	preemptirqtest_3,
> +	preemptirqtest_4,
> +	preemptirqtest_5,
> +	preemptirqtest_6,
> +	preemptirqtest_7,
> +	preemptirqtest_8,
> +	preemptirqtest_9,
> +};
> +
> +#define NR_TEST_FUNCS ARRAY_SIZE(testfuncs)
> +
> +static int preemptirq_delay_run(void *data)
> +{
> +	int i;
> +	int s = MIN(burst_size, NR_TEST_FUNCS);
> +
> +	for (i = 0; i < s; i++)
> +		(testfuncs[i])(i);
>  	return 0;
>  }
>  
> -static int __init preemptirq_delay_init(void)
> +static struct task_struct *preemptirq_start_test(void)
>  {
>  	char task_name[50];
> -	struct task_struct *test_task;
>  
>  	snprintf(task_name, sizeof(task_name), "%s_test", test_mode);
> +	return kthread_run(preemptirq_delay_run, NULL, task_name);
> +}
> +
> +
> +static ssize_t trigger_store(struct kobject *kobj, struct kobj_attribute *attr,
> +			 const char *buf, size_t count)
> +{
> +	preemptirq_start_test();
> +	return count;
> +}
> +
> +static struct kobj_attribute trigger_attribute =
> +	__ATTR(trigger, 0200, NULL, trigger_store);
> +
> +static struct attribute *attrs[] = {
> +	&trigger_attribute.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group attr_group = {
> +	.attrs = attrs,
> +};
> +
> +static struct kobject *preemptirq_delay_kobj;
> +
> +static int __init preemptirq_delay_init(void)
> +{
> +	struct task_struct *test_task;
> +	int retval;
> +
> +	test_task = preemptirq_start_test();
> +	retval = PTR_ERR_OR_ZERO(test_task);
> +	if (retval != 0)
> +		return retval;
> +
> +	preemptirq_delay_kobj = kobject_create_and_add("preemptirq_delay_test",
> +						       kernel_kobj);
> +	if (!preemptirq_delay_kobj)
> +		return -ENOMEM;
> +
> +	retval = sysfs_create_group(preemptirq_delay_kobj, &attr_group);
> +	if (retval)
> +		kobject_put(preemptirq_delay_kobj);
>  
> -	test_task = kthread_run(preemptirq_delay_run, NULL, task_name);
> -	return PTR_ERR_OR_ZERO(test_task);
> +	return retval;
>  }
>  
>  static void __exit preemptirq_delay_exit(void)
>  {
> -	return;
> +	kobject_put(preemptirq_delay_kobj);
>  }
>  
>  module_init(preemptirq_delay_init)
> -- 
> 2.17.1
> 

  reply	other threads:[~2019-10-02  0:43 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-20 15:22 [PATCH v7 0/4] Some new features for the preempt/irqsoff tracers Viktor Rosendahl (BMW)
2019-09-20 15:22 ` [PATCH v7 1/4] ftrace: Implement fs notification for tracing_max_latency Viktor Rosendahl (BMW)
2019-10-02  0:32   ` Joel Fernandes
2019-10-03 10:23     ` Viktor Rosendahl
2019-10-02 15:13   ` Steven Rostedt
2019-10-02 22:04     ` Viktor Rosendahl
2019-10-02 22:50       ` Steven Rostedt
2019-09-20 15:22 ` [PATCH v7 2/4] preemptirq_delay_test: Add the burst feature and a sysfs trigger Viktor Rosendahl (BMW)
2019-10-02  0:43   ` Joel Fernandes [this message]
2019-09-20 15:22 ` [PATCH v7 3/4] Add the latency-collector to tools Viktor Rosendahl (BMW)
2019-09-20 15:22 ` [PATCH v7 4/4] ftrace: Add an option for tracing console latencies Viktor Rosendahl (BMW)
2019-10-02  0:52   ` Joel Fernandes
2019-10-02 22:44     ` Viktor Rosendahl
2019-10-03 13:48       ` Joel Fernandes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191002004333.GB161396@google.com \
    --to=joel@joelfernandes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=rostedt@goodmis.org \
    --cc=viktor.rosendahl@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).