Re: [PATCH] drm: sun8i-ui/vi: Fix layer zpos change/atomic modesetting

[Maxime Ripard <mripard@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 3576 bytes --]

On Tue, Sep 24, 2019 at 02:40:54PM +0200, Ondřej Jirman wrote:
> > >  On first run of the X server, only the black screen and the layer
> > >  containing the cursor is visible. Switching to console and back
> > >  corrects the situation.
> > >
> > >  I have dumped registers, and found out this:
> > >
> > >  (In both cases there are two enabled planes, plane 1 with zpos 0 and
> > >  plane 3 with zpos 1).
> > >
> > >  1) First Xorg run:
> > >
> > >    0x01101000 : 00000201
> > >    0x01101080 : 00000030
> > >
> > >    BLD_FILL_COLOR_CTL: (aka SUN8I_MIXER_BLEND_PIPE_CTL)
> > >      P1_EN
> > >
> > >    BLD_CH_RTCTL: (aka SUN8I_MIXER_BLEND_ROUTE)
> > >      P0_RTCTL channel0
> > >      P1_RTCTL channel3
> > >
> > >  2) After switch to console and back to Xorg:
> > >
> > >  0x01101000 : 00000301
> > >  0x01101080 : 00000031
> > >
> > >    BLD_FILL_COLOR_CTL:
> > >      P1_EN and P0_EN
> > >
> > >    BLD_CH_RTCTL:
> > >      P0_RTCTL channel1
> > >      P1_RTCTL channel3
> > >
> > >  What happens is that sun8i_ui_layer_enable() function may disable
> > >  blending pipes even if it is no longer assigned to its layer, because
> > >  of incorrect state/zpos tracking in the driver.
> > >
> > >  In particular, layer 1 is configured to zpos 0 and thus uses pipe 0.
> > >  When layer 3 is enabled by X server, sun8i_ui_layer_enable() will get
> > >  called with old_zpos=0 zpos=1, which will lead to disabling of pipe 0.
> > >
> > >  In general this issue can happen to any layer during enable or zpos
> > >  changes on multiple layers at once.
> > >
> > >  To correct this we now pass previous enabled/disabled state of the
> > >  layer, and pass real previous zpos of the layer to
> > >  sun8i_ui_layer_enable() and rework the sun8i_ui_layer_enable() function
> > >  to react to the state changes correctly. In order to not complicate
> > >  the atomic_disable callback with all of the above changes, we simply
> > >  remove it and implement all the chanes as part of atomic_update, which
> > >  also reduces the code duplication.
> >
> > I'm not even sure why we need that old state. Can't we just reset
> > completely the whole thing and do the configuration all over again?
>
> That would be nice from a dev standpoint if we can get a complete state for all
> planes at once from DRM core, but how? DRM helper gives callbacks
> for updating individual planes with prev and new state. These individual layer
> change notifications don't map nicely to how pipes are represented in the mixer
> registers.

You have a pointer to the full DRM state in the state field, so you
have that option.

The other option is just to clear everything in atomic_begin, update
each plane in atomic_update, and then trigger the readout of the new
register values in atomic_commit.

> > That description just looks to me like the reset is not done properly,
> > and now we have to deal with the fallouts later on.
>
> What in particular?

Having to care about the old state? If the reset was done properly, we
wouldn't have to care.

> > >  To make this all work, initial zpos positions of all layers need to be
> > >  restored to initial values on reset.
> >
> > And this also fixes a whole other bunch of issues, and can be made
> > very trivially in a separate patch.
>
> Maybe reset should also reset registers?

The reset callback actually does the opposite, it resets a DRM
state. If anything, we want to initialize the state in reset by
reading the registers, not the opposite.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]