On Thu, Oct 03, 2019 at 08:46:31PM +0530, Jagan Teki wrote: > On Thu, Oct 3, 2019 at 6:47 PM Maxime Ripard wrote: > > > > On Thu, Oct 03, 2019 at 12:15:21PM +0530, Jagan Teki wrote: > > > The LCD timing definitions between Linux DRM vs Allwinner are different, > > > below diagram shows this clear differences. > > > > > > Active Front Sync Back > > > Region Porch Porch > > > <-----------------------><----------------><--------------><--------------> > > > //////////////////////| > > > ////////////////////// | > > > ////////////////////// |.................. ................ > > > ________________ > > > <----- [hv]display -----> > > > <------------- [hv]sync_start ------------> > > > <--------------------- [hv]sync_end ----------------------> > > > <-------------------------------- [hv]total ------------------------------> > > > > > > <----- lcd_[xy] --------> <- lcd_[hv]spw -> > > > <---------- lcd_[hv]bp ---------> > > > <-------------------------------- lcd_[hv]t ------------------------------> > > > > > > The DSI driver misinterpreted the hbp term from the BSP code to refer > > > only to the backporch, when in fact it was backporch + sync. Thus the > > > driver incorrectly used the horizontal front porch plus sync in its > > > calculation of the DRQ set bit value, when it should not have included > > > the sync timing. > > > > > > Including additional sync timings leads to flip_done timed out as: > > > > > > WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0 > > > [CRTC:46:crtc-0] vblank wait timed out > > > Modules linked in: > > > CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00026-g01f0c75b902d-dirty #13 > > > Hardware name: Allwinner sun8i Family > > > Workqueue: events deferred_probe_work_func > > > [] (unwind_backtrace) from [] (show_stack+0x10/0x14) > > > [] (show_stack) from [] (dump_stack+0x84/0x98) > > > [] (dump_stack) from [] (__warn+0xfc/0x114) > > > [] (__warn) from [] (warn_slowpath_fmt+0x44/0x68) > > > [] (warn_slowpath_fmt) from [] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0) > > > [] (drm_atomic_helper_wait_for_vblanks.part.1) from [] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c) > > > [] (drm_atomic_helper_commit_tail_rpm) from [] (commit_tail+0x40/0x6c) > > > [] (commit_tail) from [] (drm_atomic_helper_commit+0xbc/0x128) > > > [] (drm_atomic_helper_commit) from [] (restore_fbdev_mode_atomic+0x1cc/0x1dc) > > > [] (restore_fbdev_mode_atomic) from [] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0) > > > [] (drm_fb_helper_restore_fbdev_mode_unlocked) from [] (drm_fb_helper_set_par+0x30/0x54) > > > [] (drm_fb_helper_set_par) from [] (fbcon_init+0x560/0x5ac) > > > [] (fbcon_init) from [] (visual_init+0xbc/0x104) > > > [] (visual_init) from [] (do_bind_con_driver+0x1b0/0x390) > > > [] (do_bind_con_driver) from [] (do_take_over_console+0x13c/0x1c4) > > > [] (do_take_over_console) from [] (do_fbcon_takeover+0x74/0xcc) > > > [] (do_fbcon_takeover) from [] (notifier_call_chain+0x44/0x84) > > > [] (notifier_call_chain) from [] (__blocking_notifier_call_chain+0x48/0x60) > > > [] (__blocking_notifier_call_chain) from [] (blocking_notifier_call_chain+0x18/0x20) > > > [] (blocking_notifier_call_chain) from [] (register_framebuffer+0x1e0/0x2f8) > > > [] (register_framebuffer) from [] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c) > > > [] (__drm_fb_helper_initial_config_and_unlock) from [] (drm_fbdev_client_hotplug+0xe8/0x1b8) > > > [] (drm_fbdev_client_hotplug) from [] (drm_fbdev_generic_setup+0x88/0x118) > > > [] (drm_fbdev_generic_setup) from [] (sun4i_drv_bind+0x128/0x160) > > > [] (sun4i_drv_bind) from [] (try_to_bring_up_master+0x164/0x1a0) > > > [] (try_to_bring_up_master) from [] (__component_add+0x94/0x140) > > > [] (__component_add) from [] (sun6i_dsi_probe+0x144/0x234) > > > [] (sun6i_dsi_probe) from [] (platform_drv_probe+0x48/0x9c) > > > [] (platform_drv_probe) from [] (really_probe+0x1dc/0x2c8) > > > [] (really_probe) from [] (driver_probe_device+0x60/0x160) > > > [] (driver_probe_device) from [] (bus_for_each_drv+0x74/0xb8) > > > [] (bus_for_each_drv) from [] (__device_attach+0xd0/0x13c) > > > [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) > > > [] (bus_probe_device) from [] (deferred_probe_work_func+0x64/0x90) > > > [] (deferred_probe_work_func) from [] (process_one_work+0x204/0x420) > > > [] (process_one_work) from [] (worker_thread+0x274/0x5a0) > > > [] (worker_thread) from [] (kthread+0x11c/0x14c) > > > [] (kthread) from [] (ret_from_fork+0x14/0x2c) > > > Exception stack(0xde539fb0 to 0xde539ff8) > > > 9fa0: 00000000 00000000 00000000 00000000 > > > 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > > > 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 > > > ---[ end trace b57eb1e5c64c6b8b ]--- > > > random: fast init done > > > [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out > > > [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out > > > [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out > > > > > > With the terms(as described in above diagram) fixed, the panel > > > displays correctly without any timeouts. > > > > > > Tested-by: Merlijn Wajer > > > Signed-off-by: Jagan Teki > > > > Applied, thanks > > Thanks, would you apply the similar change in 3/7? It doesn't apply anymore, please resend it Maxime