LKML Archive on
 help / color / Atom feed
From: Sebastian Andrzej Siewior <>
To: Alexandre Belloni <>
Cc: Daniel Lezcano <>,
	Thomas Gleixner <>,
	Nicolas Ferre <>,,,
Subject: Re: [PATCH 0/8] clocksource/drivers/timer-atmel-tcb: add sama5d2 support
Date: Thu, 10 Oct 2019 10:26:21 +0200
Message-ID: <> (raw)
In-Reply-To: <>

On 2019-10-10 00:39:58 [+0200], Alexandre Belloni wrote:
> This series mainly adds sama5d2 support where we need to avoid using
> clock index 0 because that clock is never enabled by the driver.
> There is also a rework of the 32khz clock handling so it is not used for
> clockevents on 32 bit counter because the increased rate improves the
> resolution and doesn't have any drawback with that counter width. This
> replaces a patch that has been carried in the linux-rt tree for a while.

Thank you for doing this!


      parent reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09 22:39 Alexandre Belloni
2019-10-09 22:39 ` [PATCH 1/8] dt-bindings: mfd: atmel-tcb: convert bindings to json-schema Alexandre Belloni
2019-10-15 22:39   ` Rob Herring
2019-10-09 22:40 ` [PATCH 2/8] dt-bindings: mfd: atmel,at91rm9200-tcb: add sama5d2 compatible Alexandre Belloni
2019-10-09 22:40 ` [PATCH 3/8] ARM: dts: at91: sama5d2: add TCB GCLK Alexandre Belloni
2019-10-09 22:40 ` [PATCH 4/8] clocksource/drivers/timer-atmel-tcb: rework 32khz clock selection Alexandre Belloni
2019-10-09 22:40 ` [PATCH 5/8] clocksource/drivers/timer-atmel-tcb: fill tcb_config Alexandre Belloni
2019-10-09 22:40 ` [PATCH 6/8] clocksource/drivers/timer-atmel-tcb: stop using the 32kHz for clockevents Alexandre Belloni
2019-10-09 22:40 ` [PATCH 7/8] clocksource/drivers/timer-atmel-tcb: allow selecting first divider Alexandre Belloni
2019-10-09 22:40 ` [PATCH 8/8] clocksource/drivers/timer-atmel-tcb: add sama5d2 support Alexandre Belloni
2019-10-10  8:26 ` Sebastian Andrzej Siewior [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone