On Wed, Oct 16, 2019 at 03:10:25PM -0700, Greg Kroah-Hartman wrote: > On Wed, Oct 16, 2019 at 11:00:44PM +0100, Mark Brown wrote: > > On Wed, Oct 16, 2019 at 02:51:44PM -0700, Greg Kroah-Hartman wrote: > > > From: Oleksandr Suvorov > > > commit 694b14554d75f2a1ae111202e71860d58b434a21 upstream. > > > This control mute/unmute the ADC input of SGTL5000 > > > using its CHIP_ANA_CTRL register. > > This seems like a new feature and not an obvious candidate for stable? > there was a long email from Richard that said: > Upstream commit 631bc8f0134a ("ASoC: sgtl5000: Fix of unmute > outputs on probe"), which is e9f621efaebd in v5.3 replaced > snd_soc_component_write with snd_soc_component_update_bits and > therefore no longer cleared the MUTE_ADC flag. This caused the > ADC to stay muted and recording doesn't work any longer. This > patch fixes this problem by adding a Switch control for > MUTE_ADC. > That's why I took this. If this isn't true, I'll be glad to drop this. That's probably not an appropriate fix for stable - it's going to add a new control which users will need to manually set (or hope their userspace automatically figures out that it should set for them, more advanced userspaces like PulseAudio should) which isn't a drop in fix. You could either drop the backport that was done for zero cross or take a new patch that clears the MUTE_ADC flag (rather than punting to userspace to do so), or just be OK with what you've got at the minute which might be fine given the lack of user reports.