From: "Andreas Färber" <afaerber@suse.de>
To: linux-realtek-soc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org,
"Andreas Färber" <afaerber@suse.de>,
"Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] ARM: dts: Prepare Realtek RTD1195 and MeLE X1000
Date: Mon, 21 Oct 2019 04:10:35 +0200 [thread overview]
Message-ID: <20191021021035.7032-4-afaerber@suse.de> (raw)
In-Reply-To: <20191021021035.7032-1-afaerber@suse.de>
Add Device Trees for Realtek RTD1195 SoC and MeLE X1000 TV box.
Reuse the existing RTD1295 watchdog compatible for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/rtd1195-mele-x1000.dts | 30 ++++++++
arch/arm/boot/dts/rtd1195.dtsi | 128 +++++++++++++++++++++++++++++++
3 files changed, 160 insertions(+)
create mode 100644 arch/arm/boot/dts/rtd1195-mele-x1000.dts
create mode 100644 arch/arm/boot/dts/rtd1195.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 73d33611c372..89a951485da8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -858,6 +858,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
dtb-$(CONFIG_ARCH_RDA) += \
rda8810pl-orangepi-2g-iot.dtb \
rda8810pl-orangepi-i96.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += \
+ rtd1195-mele-x1000.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb \
arm-realview-pb11mp.dtb \
diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
new file mode 100644
index 000000000000..ce9a255950d3
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+ compatible = "mele,x1000", "realtek,rtd1195";
+ model = "MeLE X1000";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
new file mode 100644
index 000000000000..475740c67d26
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/memreserve/ 0x00000000 0x0000c000; /* boot code */
+/memreserve/ 0x0000c000 0x000f4000;
+/memreserve/ 0x01b00000 0x00400000; /* audio */
+/memreserve/ 0x01ffe000 0x00004000; /* rpc ringbuf */
+/memreserve/ 0x10000000 0x00100000; /* secure */
+/memreserve/ 0x17fff000 0x00001000;
+/memreserve/ 0x18000000 0x00100000; /* rbus */
+/memreserve/ 0x18100000 0x01000000; /* nor */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "realtek,rtd1195";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ clock-frequency = <1000000000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ clock-frequency = <1000000000>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ secure@10000000 {
+ reg = <0x10000000 0x100000>;
+ no-map;
+ };
+
+ rbus@18000000 {
+ reg = <0x18000000 0x100000>;
+ no-map;
+ };
+
+ nor@18100000 {
+ reg = <0x18100000 0x1000000>;
+ no-map;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <27000000>;
+ };
+
+ osc27M: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ #clock-cells = <0>;
+ clock-output-names = "osc27M";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ wdt: watchdog@18007680 {
+ compatible = "realtek,rtd1295-watchdog";
+ reg = <0x18007680 0x100>;
+ clocks = <&osc27M>;
+ };
+
+ uart0: serial@18007800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18007800 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ status = "disabled";
+ };
+
+ uart1: serial@1801b200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1801b200 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@ff011000 {
+ compatible = "arm,cortex-a7-gic";
+ reg = <0xff011000 0x1000>,
+ <0xff012000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+};
--
2.16.4
next prev parent reply other threads:[~2019-10-21 2:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191021021035.7032-1-afaerber@suse.de>
2019-10-21 2:10 ` [PATCH 1/3] dt-bindings: arm: realtek: Add RTD1195 and MeLE X1000 Andreas Färber
2019-10-29 15:41 ` Rob Herring
2019-10-21 2:10 ` [PATCH 2/3] ARM: Prepare Realtek RTD1195 Andreas Färber
2019-10-21 2:10 ` Andreas Färber [this message]
2019-10-29 15:41 ` [PATCH 3/3] ARM: dts: Prepare Realtek RTD1195 and MeLE X1000 Rob Herring
2019-10-29 15:52 ` Andreas Färber
2019-10-29 20:40 ` Rob Herring
2019-10-30 3:49 ` Andreas Färber
2019-10-30 14:01 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191021021035.7032-4-afaerber@suse.de \
--to=afaerber@suse.de \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-realtek-soc@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).