linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peng Ma <peng.ma@nxp.com>
To: vkoul@kernel.org
Cc: dan.j.williams@intel.com, leoyang.li@nxp.com,
	k.kozlowski.k@gmail.com, fabio.estevam@nxp.com,
	dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org,
	Peng Ma <peng.ma@nxp.com>
Subject: [V2] dmaengine: fsl-edma: Add eDMA support for QorIQ LS1028A platform
Date: Mon, 21 Oct 2019 10:21:49 +0800	[thread overview]
Message-ID: <20191021022149.37112-1-peng.ma@nxp.com> (raw)

Our platforms(such as LS1021A, LS1012A, LS1043A, LS1046A, LS1028A) with below
registers(CHCFG0 - CHCFG15) of eDMA as follows:
*-----------------------------------------------------------*
|     Offset   |	OTHERS      |		LS1028A	    |
|--------------|--------------------|-----------------------|
|     0x0      |        CHCFG0      |           CHCFG3      |
|--------------|--------------------|-----------------------|
|     0x1      |        CHCFG1      |           CHCFG2      |
|--------------|--------------------|-----------------------|
|     0x2      |        CHCFG2      |           CHCFG1      |
|--------------|--------------------|-----------------------|
|     0x3      |        CHCFG3      |           CHCFG0      |
|--------------|--------------------|-----------------------|
|     ...      |        ......      |           ......      |
|--------------|--------------------|-----------------------|
|     0xC      |        CHCFG12     |           CHCFG15     |
|--------------|--------------------|-----------------------|
|     0xD      |        CHCFG13     |           CHCFG14     |
|--------------|--------------------|-----------------------|
|     0xE      |        CHCFG14     |           CHCFG13     |
|--------------|--------------------|-----------------------|
|     0xF      |        CHCFG15     |           CHCFG12     |
*-----------------------------------------------------------*

This patch is to improve edma driver to fit LS1028A platform.

Signed-off-by: Peng Ma <peng.ma@nxp.com>
---
Changed for V2:
	- Explaining what's the "Our platforms"

 drivers/dma/fsl-edma-common.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
index b1a7ca9..611186b 100644
--- a/drivers/dma/fsl-edma-common.c
+++ b/drivers/dma/fsl-edma-common.c
@@ -7,6 +7,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/dma-mapping.h>
+#include <linux/sys_soc.h>
 
 #include "fsl-edma-common.h"
 
@@ -42,6 +43,11 @@
 
 #define EDMA_TCD		0x1000
 
+static struct soc_device_attribute soc_fixup_tuning[] = {
+	{ .family = "QorIQ LS1028A"},
+	{ },
+};
+
 static void fsl_edma_enable_request(struct fsl_edma_chan *fsl_chan)
 {
 	struct edma_regs *regs = &fsl_chan->edma->regs;
@@ -109,10 +115,16 @@ void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
 	u32 ch = fsl_chan->vchan.chan.chan_id;
 	void __iomem *muxaddr;
 	unsigned int chans_per_mux, ch_off;
+	int endian_diff[4] = {3, 1, -1, -3};
 	u32 dmamux_nr = fsl_chan->edma->drvdata->dmamuxs;
 
 	chans_per_mux = fsl_chan->edma->n_chans / dmamux_nr;
 	ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
+
+	if (!fsl_chan->edma->big_endian &&
+	    soc_device_match(soc_fixup_tuning))
+		ch_off += endian_diff[ch_off % 4];
+
 	muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
 	slot = EDMAMUX_CHCFG_SOURCE(slot);
 
-- 
2.9.5


             reply	other threads:[~2019-10-21  2:32 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-21  2:21 Peng Ma [this message]
2019-10-21 21:54 ` [V2] dmaengine: fsl-edma: Add eDMA support for QorIQ LS1028A platform Leo Li
2019-10-22  0:25   ` Li Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191021022149.37112-1-peng.ma@nxp.com \
    --to=peng.ma@nxp.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=k.kozlowski.k@gmail.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).