From: Corey Minyard <minyard@acm.org>
To: Tony Camuso <tcamuso@redhat.com>
Cc: openipmi-developer@lists.sourceforge.net,
linux-kernel@vger.kernel.org, Corey Minyard <cminyard@mvista.com>
Subject: Re: [PATCH] ipmi: Don't allow device module unload when in use
Date: Tue, 22 Oct 2019 10:56:29 -0500 [thread overview]
Message-ID: <20191022155629.GU14232@t560> (raw)
In-Reply-To: <28065598-c638-07eb-d966-0e85ce62c37f@redhat.com>
On Tue, Oct 22, 2019 at 10:29:12AM -0400, Tony Camuso wrote:
> Corey,
>
> Testing shows that this patch works as expected.
Thanks, I'll add a Tested-by for you. It's queued for the next merge
window.
-corey
>
> Regards,
> Tony
>
>
> On 10/14/19 11:46 AM, minyard@acm.org wrote:
> > From: Corey Minyard <cminyard@mvista.com>
> >
> > If something has the IPMI driver open, don't allow the device
> > module to be unloaded. Before it would unload and the user would
> > get errors on use.
> >
> > This change is made on user request, and it makes it consistent
> > with the I2C driver, which has the same behavior.
> >
> > It does change things a little bit with respect to kernel users.
> > If the ACPI or IPMI watchdog (or any other kernel user) has
> > created a user, then the device module cannot be unloaded. Before
> > it could be unloaded,
> >
> > This does not affect hot-plug. If the device goes away (it's on
> > something removable that is removed or is hot-removed via sysfs)
> > then it still behaves as it did before.
> >
> > Reported-by: tony camuso <tcamuso@redhat.com>
> > Signed-off-by: Corey Minyard <cminyard@mvista.com>
> > ---
> > Tony, here is a suggested change for this. Can you look it over and
> > see if it looks ok?
> >
> > Thanks,
> >
> > -corey
> >
> > drivers/char/ipmi/ipmi_msghandler.c | 23 ++++++++++++++++-------
> > include/linux/ipmi_smi.h | 12 ++++++++----
> > 2 files changed, 24 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
> > index 2aab80e19ae0..15680de18625 100644
> > --- a/drivers/char/ipmi/ipmi_msghandler.c
> > +++ b/drivers/char/ipmi/ipmi_msghandler.c
> > @@ -448,6 +448,8 @@ enum ipmi_stat_indexes {
> > #define IPMI_IPMB_NUM_SEQ 64
> > struct ipmi_smi {
> > + struct module *owner;
> > +
> > /* What interface number are we? */
> > int intf_num;
> > @@ -1220,6 +1222,11 @@ int ipmi_create_user(unsigned int if_num,
> > if (rv)
> > goto out_kfree;
> > + if (!try_module_get(intf->owner)) {
> > + rv = -ENODEV;
> > + goto out_kfree;
> > + }
> > +
> > /* Note that each existing user holds a refcount to the interface. */
> > kref_get(&intf->refcount);
> > @@ -1349,6 +1356,7 @@ static void _ipmi_destroy_user(struct ipmi_user *user)
> > }
> > kref_put(&intf->refcount, intf_free);
> > + module_put(intf->owner);
> > }
> > int ipmi_destroy_user(struct ipmi_user *user)
> > @@ -2459,7 +2467,7 @@ static int __get_device_id(struct ipmi_smi *intf, struct bmc_device *bmc)
> > * been recently fetched, this will just use the cached data. Otherwise
> > * it will run a new fetch.
> > *
> > - * Except for the first time this is called (in ipmi_register_smi()),
> > + * Except for the first time this is called (in ipmi_add_smi()),
> > * this will always return good data;
> > */
> > static int __bmc_get_device_id(struct ipmi_smi *intf, struct bmc_device *bmc,
> > @@ -3377,10 +3385,11 @@ static void redo_bmc_reg(struct work_struct *work)
> > kref_put(&intf->refcount, intf_free);
> > }
> > -int ipmi_register_smi(const struct ipmi_smi_handlers *handlers,
> > - void *send_info,
> > - struct device *si_dev,
> > - unsigned char slave_addr)
> > +int ipmi_add_smi(struct module *owner,
> > + const struct ipmi_smi_handlers *handlers,
> > + void *send_info,
> > + struct device *si_dev,
> > + unsigned char slave_addr)
> > {
> > int i, j;
> > int rv;
> > @@ -3406,7 +3415,7 @@ int ipmi_register_smi(const struct ipmi_smi_handlers *handlers,
> > return rv;
> > }
> > -
> > + intf->owner = owner;
> > intf->bmc = &intf->tmp_bmc;
> > INIT_LIST_HEAD(&intf->bmc->intfs);
> > mutex_init(&intf->bmc->dyn_mutex);
> > @@ -3514,7 +3523,7 @@ int ipmi_register_smi(const struct ipmi_smi_handlers *handlers,
> > return rv;
> > }
> > -EXPORT_SYMBOL(ipmi_register_smi);
> > +EXPORT_SYMBOL(ipmi_add_smi);
> > static void deliver_smi_err_response(struct ipmi_smi *intf,
> > struct ipmi_smi_msg *msg,
> > diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h
> > index 4dc66157d872..deec18b8944a 100644
> > --- a/include/linux/ipmi_smi.h
> > +++ b/include/linux/ipmi_smi.h
> > @@ -224,10 +224,14 @@ static inline int ipmi_demangle_device_id(uint8_t netfn, uint8_t cmd,
> > * is called, and the lower layer must get the interface from that
> > * call.
> > */
> > -int ipmi_register_smi(const struct ipmi_smi_handlers *handlers,
> > - void *send_info,
> > - struct device *dev,
> > - unsigned char slave_addr);
> > +int ipmi_add_smi(struct module *owner,
> > + const struct ipmi_smi_handlers *handlers,
> > + void *send_info,
> > + struct device *dev,
> > + unsigned char slave_addr);
> > +
> > +#define ipmi_register_smi(handlers, send_info, dev, slave_addr) \
> > + ipmi_add_smi(THIS_MODULE, handlers, send_info, dev, slave_addr)
> > /*
> > * Remove a low-level interface from the IPMI driver. This will
> >
>
prev parent reply other threads:[~2019-10-22 15:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191014134141.GA25427@t560>
2019-10-14 15:46 ` [PATCH] ipmi: Don't allow device module unload when in use minyard
2019-10-16 12:18 ` tony camuso
2019-10-16 13:13 ` tony camuso
2019-10-16 19:25 ` Tony Camuso
2019-10-16 19:33 ` Corey Minyard
2019-10-16 19:54 ` Tony Camuso
2019-10-22 14:29 ` Tony Camuso
2019-10-22 15:56 ` Corey Minyard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191022155629.GU14232@t560 \
--to=minyard@acm.org \
--cc=cminyard@mvista.com \
--cc=linux-kernel@vger.kernel.org \
--cc=openipmi-developer@lists.sourceforge.net \
--cc=tcamuso@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).