LKML Archive on
 help / color / Atom feed
From: Brian Masney <>
Subject: [PATCH v2 1/4] ARM: qcom_defconfig: add msm8974 interconnect support
Date: Thu, 24 Oct 2019 06:31:37 -0400
Message-ID: <> (raw)
In-Reply-To: <>

Add interconnect support for msm8974-based SoCs in order to support the
GPU on this platform.

Signed-off-by: Brian Masney <>
Changes since v1:
- Set CONFIG_INTERCONNECT=y since its now a bool instead of a tristate

 arch/arm/configs/qcom_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 9792dd0aae0c..cbe4e1d86f9a 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -252,6 +252,9 @@ CONFIG_PHY_QCOM_IPQ806X_SATA=y

  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-24 10:31 [PATCH v2 0/4] ARM: qcom: add defconfig items and dts nodes Brian Masney
2019-10-24 10:31 ` Brian Masney [this message]
2019-11-09  0:43   ` [PATCH v2 1/4] ARM: qcom_defconfig: add msm8974 interconnect support Brian Masney
2019-11-09  1:57     ` Bjorn Andersson
2019-10-24 10:31 ` [PATCH v2 2/4] ARM: qcom_defconfig: add anx78xx HDMI bridge support Brian Masney
2019-10-24 10:31 ` [PATCH v2 3/4] ARM: dts: qcom: msm8974: add ocmem node Brian Masney
2019-10-24 10:31 ` [PATCH v2 4/4] ARM: dts: qcom: msm8974: add interconnect nodes Brian Masney
2019-10-29 11:18 ` [PATCH v2 0/4] ARM: qcom: add defconfig items and dts nodes Georgi Djakov

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone