From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: sboyd@kernel.org, mturquette@baylibre.com, robh+dt@kernel.org
Cc: linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
haitao.suo@bitmain.com, darren.tsao@bitmain.com,
fisher.cheng@bitmain.com, alec.lin@bitmain.com,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v6 6/7] clk: Add common clock driver for BM1880 SoC
Date: Sat, 26 Oct 2019 16:32:52 +0530 [thread overview]
Message-ID: <20191026110253.18426-7-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20191026110253.18426-1-manivannan.sadhasivam@linaro.org>
Add common clock driver for Bitmain BM1880 SoC. The clock controller on
BM1880 has supplies clocks to all peripherals in the form of gate clocks
and composite clocks (fixed factor + gate).
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/clk/Kconfig | 7 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-bm1880.c | 970 +++++++++++++++++++++++++++++++++++++++
3 files changed, 978 insertions(+)
create mode 100644 drivers/clk/clk-bm1880.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c44247d0b83e..dc920daa6dbb 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -136,6 +136,13 @@ config COMMON_CLK_SI570
This driver supports Silicon Labs 570/571/598/599 programmable
clock generators.
+config COMMON_CLK_BM1880
+ bool "Clock driver for Bitmain BM1880 SoC"
+ depends on ARCH_BITMAIN || COMPILE_TEST
+ default ARCH_BITMAIN
+ help
+ This driver supports the clocks on Bitmain BM1880 SoC.
+
config COMMON_CLK_CDCE706
tristate "Clock driver for TI CDCE706 clock synthesizer"
depends on I2C
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 0138fb14e6f8..0696a0c1ab58 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_MACH_ASM9260) += clk-asm9260.o
obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
obj-$(CONFIG_COMMON_CLK_BD718XX) += clk-bd718x7.o
+obj-$(CONFIG_COMMON_CLK_BM1880) += clk-bm1880.o
obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
diff --git a/drivers/clk/clk-bm1880.c b/drivers/clk/clk-bm1880.c
new file mode 100644
index 000000000000..92bc16977d80
--- /dev/null
+++ b/drivers/clk/clk-bm1880.c
@@ -0,0 +1,970 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Bitmain BM1880 SoC clock driver
+ *
+ * Copyright (c) 2019 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/bm1880-clock.h>
+
+#define BM1880_CLK_MPLL_CTL 0x00
+#define BM1880_CLK_SPLL_CTL 0x04
+#define BM1880_CLK_FPLL_CTL 0x08
+#define BM1880_CLK_DDRPLL_CTL 0x0c
+
+#define BM1880_CLK_ENABLE0 0x00
+#define BM1880_CLK_ENABLE1 0x04
+#define BM1880_CLK_SELECT 0x20
+#define BM1880_CLK_DIV0 0x40
+#define BM1880_CLK_DIV1 0x44
+#define BM1880_CLK_DIV2 0x48
+#define BM1880_CLK_DIV3 0x4c
+#define BM1880_CLK_DIV4 0x50
+#define BM1880_CLK_DIV5 0x54
+#define BM1880_CLK_DIV6 0x58
+#define BM1880_CLK_DIV7 0x5c
+#define BM1880_CLK_DIV8 0x60
+#define BM1880_CLK_DIV9 0x64
+#define BM1880_CLK_DIV10 0x68
+#define BM1880_CLK_DIV11 0x6c
+#define BM1880_CLK_DIV12 0x70
+#define BM1880_CLK_DIV13 0x74
+#define BM1880_CLK_DIV14 0x78
+#define BM1880_CLK_DIV15 0x7c
+#define BM1880_CLK_DIV16 0x80
+#define BM1880_CLK_DIV17 0x84
+#define BM1880_CLK_DIV18 0x88
+#define BM1880_CLK_DIV19 0x8c
+#define BM1880_CLK_DIV20 0x90
+#define BM1880_CLK_DIV21 0x94
+#define BM1880_CLK_DIV22 0x98
+#define BM1880_CLK_DIV23 0x9c
+#define BM1880_CLK_DIV24 0xa0
+#define BM1880_CLK_DIV25 0xa4
+#define BM1880_CLK_DIV26 0xa8
+#define BM1880_CLK_DIV27 0xac
+#define BM1880_CLK_DIV28 0xb0
+
+#define to_bm1880_pll_clk(_hw) container_of(_hw, struct bm1880_pll_hw_clock, hw)
+#define to_bm1880_div_clk(_hw) container_of(_hw, struct bm1880_div_hw_clock, hw)
+
+static DEFINE_SPINLOCK(bm1880_clk_lock);
+
+struct bm1880_clock_data {
+ void __iomem *pll_base;
+ void __iomem *sys_base;
+ struct clk_hw_onecell_data hw_data;
+};
+
+struct bm1880_gate_clock {
+ unsigned int id;
+ const char *name;
+ const char *parent;
+ u32 gate_reg;
+ s8 gate_shift;
+ unsigned long flags;
+};
+
+struct bm1880_mux_clock {
+ unsigned int id;
+ const char *name;
+ const char * const *parents;
+ s8 num_parents;
+ u32 reg;
+ s8 shift;
+ unsigned long flags;
+};
+
+struct bm1880_div_clock {
+ unsigned int id;
+ const char *name;
+ u32 reg;
+ u8 shift;
+ u8 width;
+ u32 initval;
+ const struct clk_div_table *table;
+ unsigned long flags;
+};
+
+struct bm1880_div_hw_clock {
+ struct bm1880_div_clock div;
+ void __iomem *base;
+ spinlock_t *lock;
+ struct clk_hw hw;
+ struct clk_init_data init;
+};
+
+struct bm1880_composite_clock {
+ unsigned int id;
+ const char *name;
+ const char *parent;
+ const char * const *parents;
+ unsigned int num_parents;
+ unsigned long flags;
+
+ u32 gate_reg;
+ u32 mux_reg;
+ u32 div_reg;
+
+ s8 gate_shift;
+ s8 mux_shift;
+ s8 div_shift;
+ s8 div_width;
+ s16 div_initval;
+ const struct clk_div_table *table;
+};
+
+struct bm1880_pll_clock {
+ unsigned int id;
+ const char *name;
+ u32 reg;
+ unsigned long flags;
+};
+
+struct bm1880_pll_hw_clock {
+ struct bm1880_pll_clock pll;
+ void __iomem *base;
+ struct clk_hw hw;
+ struct clk_init_data init;
+};
+
+static const struct clk_ops bm1880_pll_ops;
+static const struct clk_ops bm1880_clk_div_ops;
+
+#define GATE_DIV(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, \
+ _div_shift, _div_width, _div_initval, _table, \
+ _flags) { \
+ .id = _id, \
+ .parent = _parent, \
+ .name = _name, \
+ .gate_reg = _gate_reg, \
+ .gate_shift = _gate_shift, \
+ .div_reg = _div_reg, \
+ .div_shift = _div_shift, \
+ .div_width = _div_width, \
+ .div_initval = _div_initval, \
+ .table = _table, \
+ .mux_shift = -1, \
+ .flags = _flags, \
+ }
+
+#define GATE_MUX(_id, _name, _parents, _gate_reg, _gate_shift, \
+ _mux_reg, _mux_shift, _flags) { \
+ .id = _id, \
+ .parents = _parents, \
+ .num_parents = ARRAY_SIZE(_parents), \
+ .name = _name, \
+ .gate_reg = _gate_reg, \
+ .gate_shift = _gate_shift, \
+ .div_shift = -1, \
+ .mux_reg = _mux_reg, \
+ .mux_shift = _mux_shift, \
+ .flags = _flags, \
+ }
+
+#define CLK_PLL(_id, _name, _parent, _reg, _flags) { \
+ .pll.id = _id, \
+ .pll.name = _name, \
+ .pll.reg = _reg, \
+ .hw.init = CLK_HW_INIT_PARENTS_DATA(_name, _parent, \
+ &bm1880_pll_ops, \
+ _flags), \
+ }
+
+#define CLK_DIV(_id, _name, _parent, _reg, _shift, _width, _initval, \
+ _table, _flags) { \
+ .div.id = _id, \
+ .div.name = _name, \
+ .div.reg = _reg, \
+ .div.shift = _shift, \
+ .div.width = _width, \
+ .div.initval = _initval, \
+ .div.table = _table, \
+ .hw.init = CLK_HW_INIT_HW(_name, _parent, \
+ &bm1880_clk_div_ops, \
+ _flags), \
+ }
+
+static struct clk_parent_data bm1880_pll_parent[] = {
+ { .fw_name = "osc", .name = "osc" },
+};
+
+/*
+ * All PLL clocks are marked as CRITICAL, hence they are very crucial
+ * for the functioning of the SoC
+ */
+static struct bm1880_pll_hw_clock bm1880_pll_clks[] = {
+ CLK_PLL(BM1880_CLK_MPLL, "clk_mpll", bm1880_pll_parent,
+ BM1880_CLK_MPLL_CTL, 0),
+ CLK_PLL(BM1880_CLK_SPLL, "clk_spll", bm1880_pll_parent,
+ BM1880_CLK_SPLL_CTL, 0),
+ CLK_PLL(BM1880_CLK_FPLL, "clk_fpll", bm1880_pll_parent,
+ BM1880_CLK_FPLL_CTL, 0),
+ CLK_PLL(BM1880_CLK_DDRPLL, "clk_ddrpll", bm1880_pll_parent,
+ BM1880_CLK_DDRPLL_CTL, 0),
+};
+
+/*
+ * Clocks marked as CRITICAL are needed for the proper functioning
+ * of the SoC.
+ */
+static const struct bm1880_gate_clock bm1880_gate_clks[] = {
+ { BM1880_CLK_AHB_ROM, "clk_ahb_rom", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 2, 0 },
+ { BM1880_CLK_AXI_SRAM, "clk_axi_sram", "clk_axi1",
+ BM1880_CLK_ENABLE0, 3, 0 },
+ /*
+ * Since this clock is sourcing the DDR memory, let's mark it as
+ * critical to avoid gating.
+ */
+ { BM1880_CLK_DDR_AXI, "clk_ddr_axi", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 4, CLK_IS_CRITICAL },
+ { BM1880_CLK_APB_EFUSE, "clk_apb_efuse", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 6, 0 },
+ { BM1880_CLK_AXI5_EMMC, "clk_axi5_emmc", "clk_axi5",
+ BM1880_CLK_ENABLE0, 7, 0 },
+ { BM1880_CLK_AXI5_SD, "clk_axi5_sd", "clk_axi5",
+ BM1880_CLK_ENABLE0, 10, 0 },
+ { BM1880_CLK_AXI4_ETH0, "clk_axi4_eth0", "clk_axi4",
+ BM1880_CLK_ENABLE0, 14, 0 },
+ { BM1880_CLK_AXI4_ETH1, "clk_axi4_eth1", "clk_axi4",
+ BM1880_CLK_ENABLE0, 16, 0 },
+ { BM1880_CLK_AXI1_GDMA, "clk_axi1_gdma", "clk_axi1",
+ BM1880_CLK_ENABLE0, 17, 0 },
+ /* Don't gate GPIO clocks as it is not owned by the GPIO driver */
+ { BM1880_CLK_APB_GPIO, "clk_apb_gpio", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 18, CLK_IGNORE_UNUSED },
+ { BM1880_CLK_APB_GPIO_INTR, "clk_apb_gpio_intr", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 19, CLK_IGNORE_UNUSED },
+ { BM1880_CLK_AXI1_MINER, "clk_axi1_miner", "clk_axi1",
+ BM1880_CLK_ENABLE0, 21, 0 },
+ { BM1880_CLK_AHB_SF, "clk_ahb_sf", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 22, 0 },
+ /*
+ * Not sure which module this clock is sourcing but gating this clock
+ * prevents the system from booting. So, let's mark it as critical.
+ */
+ { BM1880_CLK_SDMA_AXI, "clk_sdma_axi", "clk_axi5",
+ BM1880_CLK_ENABLE0, 23, CLK_IS_CRITICAL },
+ { BM1880_CLK_APB_I2C, "clk_apb_i2c", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 25, 0 },
+ { BM1880_CLK_APB_WDT, "clk_apb_wdt", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 26, 0 },
+ { BM1880_CLK_APB_JPEG, "clk_apb_jpeg", "clk_axi6",
+ BM1880_CLK_ENABLE0, 27, 0 },
+ { BM1880_CLK_AXI5_NF, "clk_axi5_nf", "clk_axi5",
+ BM1880_CLK_ENABLE0, 29, 0 },
+ { BM1880_CLK_APB_NF, "clk_apb_nf", "clk_axi6",
+ BM1880_CLK_ENABLE0, 30, 0 },
+ { BM1880_CLK_APB_PWM, "clk_apb_pwm", "clk_mux_axi6",
+ BM1880_CLK_ENABLE1, 0, 0 },
+ { BM1880_CLK_RV, "clk_rv", "clk_mux_rv",
+ BM1880_CLK_ENABLE1, 1, 0 },
+ { BM1880_CLK_APB_SPI, "clk_apb_spi", "clk_mux_axi6",
+ BM1880_CLK_ENABLE1, 2, 0 },
+ { BM1880_CLK_UART_500M, "clk_uart_500m", "clk_div_uart_500m",
+ BM1880_CLK_ENABLE1, 4, 0 },
+ { BM1880_CLK_APB_UART, "clk_apb_uart", "clk_axi6",
+ BM1880_CLK_ENABLE1, 5, 0 },
+ { BM1880_CLK_APB_I2S, "clk_apb_i2s", "clk_axi6",
+ BM1880_CLK_ENABLE1, 6, 0 },
+ { BM1880_CLK_AXI4_USB, "clk_axi4_usb", "clk_axi4",
+ BM1880_CLK_ENABLE1, 7, 0 },
+ { BM1880_CLK_APB_USB, "clk_apb_usb", "clk_axi6",
+ BM1880_CLK_ENABLE1, 8, 0 },
+ { BM1880_CLK_12M_USB, "clk_12m_usb", "clk_div_12m_usb",
+ BM1880_CLK_ENABLE1, 11, 0 },
+ { BM1880_CLK_APB_VIDEO, "clk_apb_video", "clk_axi6",
+ BM1880_CLK_ENABLE1, 12, 0 },
+ { BM1880_CLK_APB_VPP, "clk_apb_vpp", "clk_axi6",
+ BM1880_CLK_ENABLE1, 15, 0 },
+ { BM1880_CLK_AXI6, "clk_axi6", "clk_mux_axi6",
+ BM1880_CLK_ENABLE1, 21, 0 },
+};
+
+static const char * const clk_a53_parents[] = { "clk_spll", "clk_mpll" };
+static const char * const clk_rv_parents[] = { "clk_div_1_rv", "clk_div_0_rv" };
+static const char * const clk_axi1_parents[] = { "clk_div_1_axi1", "clk_div_0_axi1" };
+static const char * const clk_axi6_parents[] = { "clk_div_1_axi6", "clk_div_0_axi6" };
+
+static const struct bm1880_mux_clock bm1880_mux_clks[] = {
+ { BM1880_CLK_MUX_RV, "clk_mux_rv", clk_rv_parents, 2,
+ BM1880_CLK_SELECT, 1, 0 },
+ { BM1880_CLK_MUX_AXI6, "clk_mux_axi6", clk_axi6_parents, 2,
+ BM1880_CLK_SELECT, 3, 0 },
+};
+
+static const struct clk_div_table bm1880_div_table_0[] = {
+ { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+ { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+ { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+ { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+ { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+ { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+ { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+ { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+ { 0, 0 }
+};
+
+static const struct clk_div_table bm1880_div_table_1[] = {
+ { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+ { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+ { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+ { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+ { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+ { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+ { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+ { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+ { 127, 128 }, { 0, 0 }
+};
+
+static const struct clk_div_table bm1880_div_table_2[] = {
+ { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+ { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+ { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+ { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+ { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+ { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+ { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+ { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+ { 127, 128 }, { 255, 256 }, { 0, 0 }
+};
+
+static const struct clk_div_table bm1880_div_table_3[] = {
+ { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+ { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+ { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+ { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+ { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+ { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+ { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+ { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+ { 127, 128 }, { 255, 256 }, { 511, 512 }, { 0, 0 }
+};
+
+static const struct clk_div_table bm1880_div_table_4[] = {
+ { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+ { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+ { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+ { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+ { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+ { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+ { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+ { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+ { 127, 128 }, { 255, 256 }, { 511, 512 }, { 65535, 65536 },
+ { 0, 0 }
+};
+
+/*
+ * Clocks marked as CRITICAL are needed for the proper functioning
+ * of the SoC.
+ */
+static struct bm1880_div_hw_clock bm1880_div_clks[] = {
+ CLK_DIV(BM1880_CLK_DIV_0_RV, "clk_div_0_rv", &bm1880_pll_clks[1].hw,
+ BM1880_CLK_DIV12, 16, 5, 1, bm1880_div_table_0, 0),
+ CLK_DIV(BM1880_CLK_DIV_1_RV, "clk_div_1_rv", &bm1880_pll_clks[2].hw,
+ BM1880_CLK_DIV13, 16, 5, 1, bm1880_div_table_0, 0),
+ CLK_DIV(BM1880_CLK_DIV_UART_500M, "clk_div_uart_500m", &bm1880_pll_clks[2].hw,
+ BM1880_CLK_DIV15, 16, 7, 3, bm1880_div_table_1, 0),
+ CLK_DIV(BM1880_CLK_DIV_0_AXI1, "clk_div_0_axi1", &bm1880_pll_clks[0].hw,
+ BM1880_CLK_DIV21, 16, 5, 2, bm1880_div_table_0,
+ 0),
+ CLK_DIV(BM1880_CLK_DIV_1_AXI1, "clk_div_1_axi1", &bm1880_pll_clks[2].hw,
+ BM1880_CLK_DIV22, 16, 5, 3, bm1880_div_table_0,
+ 0),
+ CLK_DIV(BM1880_CLK_DIV_0_AXI6, "clk_div_0_axi6", &bm1880_pll_clks[2].hw,
+ BM1880_CLK_DIV27, 16, 5, 15, bm1880_div_table_0,
+ 0),
+ CLK_DIV(BM1880_CLK_DIV_1_AXI6, "clk_div_1_axi6", &bm1880_pll_clks[0].hw,
+ BM1880_CLK_DIV28, 16, 5, 11, bm1880_div_table_0,
+ 0),
+ CLK_DIV(BM1880_CLK_DIV_12M_USB, "clk_div_12m_usb", &bm1880_pll_clks[2].hw,
+ BM1880_CLK_DIV18, 16, 7, 125, bm1880_div_table_1, 0),
+};
+
+/*
+ * Clocks marked as CRITICAL are all needed for the proper functioning
+ * of the SoC.
+ */
+static struct bm1880_composite_clock bm1880_composite_clks[] = {
+ /*
+ * Since clk_a53 and clk_50m_a53 clocks are sourcing the CPU core,
+ * let's mark them as critical to avoid gating.
+ */
+ GATE_MUX(BM1880_CLK_A53, "clk_a53", clk_a53_parents,
+ BM1880_CLK_ENABLE0, 0, BM1880_CLK_SELECT, 0,
+ CLK_IS_CRITICAL),
+ GATE_DIV(BM1880_CLK_50M_A53, "clk_50m_a53", "clk_fpll",
+ BM1880_CLK_ENABLE0, 1, BM1880_CLK_DIV0, 16, 5, 30,
+ bm1880_div_table_0, CLK_IS_CRITICAL),
+ GATE_DIV(BM1880_CLK_EFUSE, "clk_efuse", "clk_fpll",
+ BM1880_CLK_ENABLE0, 5, BM1880_CLK_DIV1, 16, 7, 60,
+ bm1880_div_table_1, 0),
+ GATE_DIV(BM1880_CLK_EMMC, "clk_emmc", "clk_fpll",
+ BM1880_CLK_ENABLE0, 8, BM1880_CLK_DIV2, 16, 5, 15,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_100K_EMMC, "clk_100k_emmc", "clk_div_12m_usb",
+ BM1880_CLK_ENABLE0, 9, BM1880_CLK_DIV3, 16, 8, 120,
+ bm1880_div_table_2, 0),
+ GATE_DIV(BM1880_CLK_SD, "clk_sd", "clk_fpll",
+ BM1880_CLK_ENABLE0, 11, BM1880_CLK_DIV4, 16, 5, 15,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_100K_SD, "clk_100k_sd", "clk_div_12m_usb",
+ BM1880_CLK_ENABLE0, 12, BM1880_CLK_DIV5, 16, 8, 120,
+ bm1880_div_table_2, 0),
+ GATE_DIV(BM1880_CLK_500M_ETH0, "clk_500m_eth0", "clk_fpll",
+ BM1880_CLK_ENABLE0, 13, BM1880_CLK_DIV6, 16, 5, 3,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_500M_ETH1, "clk_500m_eth1", "clk_fpll",
+ BM1880_CLK_ENABLE0, 15, BM1880_CLK_DIV7, 16, 5, 3,
+ bm1880_div_table_0, 0),
+ /* Don't gate GPIO clocks as it is not owned by the GPIO driver */
+ GATE_DIV(BM1880_CLK_GPIO_DB, "clk_gpio_db", "clk_div_12m_usb",
+ BM1880_CLK_ENABLE0, 20, BM1880_CLK_DIV8, 16, 16, 120,
+ bm1880_div_table_4, CLK_IGNORE_UNUSED),
+ GATE_DIV(BM1880_CLK_SDMA_AUD, "clk_sdma_aud", "clk_fpll",
+ BM1880_CLK_ENABLE0, 24, BM1880_CLK_DIV9, 16, 7, 61,
+ bm1880_div_table_1, 0),
+ GATE_DIV(BM1880_CLK_JPEG_AXI, "clk_jpeg_axi", "clk_fpll",
+ BM1880_CLK_ENABLE0, 28, BM1880_CLK_DIV10, 16, 5, 4,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_NF, "clk_nf", "clk_fpll",
+ BM1880_CLK_ENABLE0, 31, BM1880_CLK_DIV11, 16, 5, 30,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_TPU_AXI, "clk_tpu_axi", "clk_spll",
+ BM1880_CLK_ENABLE1, 3, BM1880_CLK_DIV14, 16, 5, 1,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_125M_USB, "clk_125m_usb", "clk_fpll",
+ BM1880_CLK_ENABLE1, 9, BM1880_CLK_DIV16, 16, 5, 12,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_33K_USB, "clk_33k_usb", "clk_div_12m_usb",
+ BM1880_CLK_ENABLE1, 10, BM1880_CLK_DIV17, 16, 9, 363,
+ bm1880_div_table_3, 0),
+ GATE_DIV(BM1880_CLK_VIDEO_AXI, "clk_video_axi", "clk_fpll",
+ BM1880_CLK_ENABLE1, 13, BM1880_CLK_DIV19, 16, 5, 4,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_VPP_AXI, "clk_vpp_axi", "clk_fpll",
+ BM1880_CLK_ENABLE1, 14, BM1880_CLK_DIV20, 16, 5, 4,
+ bm1880_div_table_0, 0),
+ GATE_MUX(BM1880_CLK_AXI1, "clk_axi1", clk_axi1_parents,
+ BM1880_CLK_ENABLE1, 15, BM1880_CLK_SELECT, 2, 0),
+ GATE_DIV(BM1880_CLK_AXI2, "clk_axi2", "clk_fpll",
+ BM1880_CLK_ENABLE1, 17, BM1880_CLK_DIV23, 16, 5, 3,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_AXI3, "clk_axi3", "clk_mux_rv",
+ BM1880_CLK_ENABLE1, 18, BM1880_CLK_DIV24, 16, 5, 2,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_AXI4, "clk_axi4", "clk_fpll",
+ BM1880_CLK_ENABLE1, 19, BM1880_CLK_DIV25, 16, 5, 6,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_AXI5, "clk_axi5", "clk_fpll",
+ BM1880_CLK_ENABLE1, 20, BM1880_CLK_DIV26, 16, 5, 15,
+ bm1880_div_table_0, 0),
+};
+
+static unsigned long bm1880_pll_rate_calc(u32 regval, unsigned long parent_rate)
+{
+ u32 fbdiv, fref, refdiv;
+ u32 postdiv1, postdiv2;
+ unsigned long rate, numerator, denominator;
+
+ fbdiv = (regval >> 16) & 0xfff;
+ fref = parent_rate;
+ refdiv = regval & 0x1f;
+ postdiv1 = (regval >> 8) & 0x7;
+ postdiv2 = (regval >> 12) & 0x7;
+
+ numerator = parent_rate * fbdiv;
+ denominator = refdiv * postdiv1 * postdiv2;
+ do_div(numerator, denominator);
+ rate = numerator;
+
+ return rate;
+}
+
+static unsigned long bm1880_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct bm1880_pll_hw_clock *pll_hw = to_bm1880_pll_clk(hw);
+ unsigned long rate;
+ u32 regval;
+
+ regval = readl(pll_hw->base + pll_hw->pll.reg);
+ rate = bm1880_pll_rate_calc(regval, parent_rate);
+
+ return rate;
+}
+
+static const struct clk_ops bm1880_pll_ops = {
+ .recalc_rate = bm1880_pll_recalc_rate,
+};
+
+static struct clk_hw *bm1880_clk_register_pll(struct bm1880_pll_hw_clock *pll_clk,
+ void __iomem *sys_base)
+{
+ struct clk_hw *hw;
+ int err;
+
+ pll_clk->base = sys_base;
+ hw = &pll_clk->hw;
+
+ err = clk_hw_register(NULL, hw);
+ if (err)
+ return ERR_PTR(err);
+
+ return hw;
+}
+
+static void bm1880_clk_unregister_pll(struct clk_hw *hw)
+{
+ struct bm1880_pll_hw_clock *pll_hw = to_bm1880_pll_clk(hw);
+
+ clk_hw_unregister(hw);
+ kfree(pll_hw);
+}
+
+static int bm1880_clk_register_plls(struct bm1880_pll_hw_clock *clks,
+ int num_clks,
+ struct bm1880_clock_data *data)
+{
+ struct clk_hw *hw;
+ void __iomem *pll_base = data->pll_base;
+ int i;
+
+ for (i = 0; i < num_clks; i++) {
+ struct bm1880_pll_hw_clock *bm1880_clk = &clks[i];
+
+ hw = bm1880_clk_register_pll(bm1880_clk, pll_base);
+ if (IS_ERR(hw)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, bm1880_clk->pll.name);
+ goto err_clk;
+ }
+
+ data->hw_data.hws[clks[i].pll.id] = hw;
+ }
+
+ return 0;
+
+err_clk:
+ while (i--)
+ bm1880_clk_unregister_pll(data->hw_data.hws[clks[i].pll.id]);
+
+ return PTR_ERR(hw);
+}
+
+static int bm1880_clk_register_mux(const struct bm1880_mux_clock *clks,
+ int num_clks,
+ struct bm1880_clock_data *data)
+{
+ struct clk_hw *hw;
+ void __iomem *sys_base = data->sys_base;
+ int i;
+
+ for (i = 0; i < num_clks; i++) {
+ hw = clk_hw_register_mux(NULL, clks[i].name,
+ clks[i].parents,
+ clks[i].num_parents,
+ clks[i].flags,
+ sys_base + clks[i].reg,
+ clks[i].shift, 1, 0,
+ &bm1880_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ goto err_clk;
+ }
+
+ data->hw_data.hws[clks[i].id] = hw;
+ }
+
+ return 0;
+
+err_clk:
+ while (i--)
+ clk_hw_unregister_mux(data->hw_data.hws[clks[i].id]);
+
+ return PTR_ERR(hw);
+}
+
+static unsigned long bm1880_clk_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
+ struct bm1880_div_clock *div = &div_hw->div;
+ void __iomem *reg_addr = div_hw->base + div->reg;
+ unsigned int val;
+ unsigned long rate;
+
+ if (!(readl(reg_addr) & BIT(3))) {
+ val = div->initval;
+ } else {
+ val = readl(reg_addr) >> div->shift;
+ val &= clk_div_mask(div->width);
+ }
+
+ rate = divider_recalc_rate(hw, parent_rate, val, div->table,
+ div->flags, div->width);
+
+ return rate;
+}
+
+static long bm1880_clk_div_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
+ struct bm1880_div_clock *div = &div_hw->div;
+ void __iomem *reg_addr = div_hw->base + div->reg;
+
+ if (div->flags & CLK_DIVIDER_READ_ONLY) {
+ u32 val;
+
+ val = readl(reg_addr) >> div->shift;
+ val &= clk_div_mask(div->width);
+
+ return divider_ro_round_rate(hw, rate, prate, div->table,
+ div->width, div->flags,
+ val);
+ }
+
+ return divider_round_rate(hw, rate, prate, div->table,
+ div->width, div->flags);
+}
+
+static int bm1880_clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
+ struct bm1880_div_clock *div = &div_hw->div;
+ void __iomem *reg_addr = div_hw->base + div->reg;
+ unsigned long flags = 0;
+ int value;
+ u32 val;
+
+ value = divider_get_val(rate, parent_rate, div->table,
+ div->width, div_hw->div.flags);
+ if (value < 0)
+ return value;
+
+ if (div_hw->lock)
+ spin_lock_irqsave(div_hw->lock, flags);
+ else
+ __acquire(div_hw->lock);
+
+ val = readl(reg_addr);
+ val &= ~(clk_div_mask(div->width) << div_hw->div.shift);
+ val |= (u32)value << div->shift;
+ writel(val, reg_addr);
+
+ if (div_hw->lock)
+ spin_unlock_irqrestore(div_hw->lock, flags);
+ else
+ __release(div_hw->lock);
+
+ return 0;
+}
+
+static const struct clk_ops bm1880_clk_div_ops = {
+ .recalc_rate = bm1880_clk_div_recalc_rate,
+ .round_rate = bm1880_clk_div_round_rate,
+ .set_rate = bm1880_clk_div_set_rate,
+};
+
+static struct clk_hw *bm1880_clk_register_div(struct bm1880_div_hw_clock *div_clk,
+ void __iomem *sys_base)
+{
+ struct clk_hw *hw;
+ int err;
+
+ div_clk->div.flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO;
+ div_clk->base = sys_base;
+ div_clk->lock = &bm1880_clk_lock;
+
+ hw = &div_clk->hw;
+ err = clk_hw_register(NULL, hw);
+ if (err)
+ return ERR_PTR(err);
+
+ return hw;
+}
+
+static void bm1880_clk_unregister_div(struct clk_hw *hw)
+{
+ struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
+
+ clk_hw_unregister(hw);
+ kfree(div_hw);
+}
+
+static int bm1880_clk_register_divs(struct bm1880_div_hw_clock *clks,
+ int num_clks,
+ struct bm1880_clock_data *data)
+{
+ struct clk_hw *hw;
+ void __iomem *sys_base = data->sys_base;
+ unsigned int i, id;
+
+ for (i = 0; i < num_clks; i++) {
+ struct bm1880_div_hw_clock *bm1880_clk = &clks[i];
+
+ hw = bm1880_clk_register_div(bm1880_clk, sys_base);
+ if (IS_ERR(hw)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, bm1880_clk->div.name);
+ goto err_clk;
+ }
+
+ id = clks[i].div.id;
+ data->hw_data.hws[id] = hw;
+ }
+
+ return 0;
+
+err_clk:
+ while (i--)
+ bm1880_clk_unregister_div(data->hw_data.hws[clks[i].div.id]);
+
+ return PTR_ERR(hw);
+}
+
+static int bm1880_clk_register_gate(const struct bm1880_gate_clock *clks,
+ int num_clks,
+ struct bm1880_clock_data *data)
+{
+ struct clk_hw *hw;
+ void __iomem *sys_base = data->sys_base;
+ int i;
+
+ for (i = 0; i < num_clks; i++) {
+ hw = clk_hw_register_gate(NULL, clks[i].name,
+ clks[i].parent,
+ clks[i].flags,
+ sys_base + clks[i].gate_reg,
+ clks[i].gate_shift, 0,
+ &bm1880_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ goto err_clk;
+ }
+
+ data->hw_data.hws[clks[i].id] = hw;
+ }
+
+ return 0;
+
+err_clk:
+ while (i--)
+ clk_hw_unregister_gate(data->hw_data.hws[clks[i].id]);
+
+ return PTR_ERR(hw);
+}
+
+static struct clk_hw *bm1880_clk_register_composite(struct bm1880_composite_clock *clks,
+ void __iomem *sys_base)
+{
+ struct clk_hw *hw;
+ struct clk_mux *mux = NULL;
+ struct clk_gate *gate = NULL;
+ struct bm1880_div_hw_clock *div_hws = NULL;
+ struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *div_hw = NULL;
+ const struct clk_ops *mux_ops = NULL, *gate_ops = NULL, *div_ops = NULL;
+ const char * const *parent_names;
+ const char *parent;
+ int num_parents;
+ int ret;
+
+ if (clks->mux_shift >= 0) {
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ mux->reg = sys_base + clks->mux_reg;
+ mux->mask = 1;
+ mux->shift = clks->mux_shift;
+ mux_hw = &mux->hw;
+ mux_ops = &clk_mux_ops;
+ mux->lock = &bm1880_clk_lock;
+
+ parent_names = clks->parents;
+ num_parents = clks->num_parents;
+ } else {
+ parent = clks->parent;
+ parent_names = &parent;
+ num_parents = 1;
+ }
+
+ if (clks->gate_shift >= 0) {
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ gate->reg = sys_base + clks->gate_reg;
+ gate->bit_idx = clks->gate_shift;
+ gate->lock = &bm1880_clk_lock;
+
+ gate_hw = &gate->hw;
+ gate_ops = &clk_gate_ops;
+ }
+
+ if (clks->div_shift >= 0) {
+ div_hws = kzalloc(sizeof(*div_hws), GFP_KERNEL);
+ if (!div_hws) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ div_hws->base = sys_base;
+ div_hws->div.reg = clks->div_reg;
+ div_hws->div.shift = clks->div_shift;
+ div_hws->div.width = clks->div_width;
+ div_hws->div.table = clks->table;
+ div_hws->div.initval = clks->div_initval;
+ div_hws->lock = &bm1880_clk_lock;
+ div_hws->div.flags = CLK_DIVIDER_ONE_BASED |
+ CLK_DIVIDER_ALLOW_ZERO;
+
+ div_hw = &div_hws->hw;
+ div_ops = &bm1880_clk_div_ops;
+ }
+
+ hw = clk_hw_register_composite(NULL, clks->name, parent_names,
+ num_parents, mux_hw, mux_ops, div_hw,
+ div_ops, gate_hw, gate_ops,
+ clks->flags);
+
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_out;
+ }
+
+ return hw;
+
+err_out:
+ kfree(div_hws);
+ kfree(gate);
+ kfree(mux);
+
+ return ERR_PTR(ret);
+}
+
+static int bm1880_clk_register_composites(struct bm1880_composite_clock *clks,
+ int num_clks,
+ struct bm1880_clock_data *data)
+{
+ struct clk_hw *hw;
+ void __iomem *sys_base = data->sys_base;
+ int i;
+
+ for (i = 0; i < num_clks; i++) {
+ struct bm1880_composite_clock *bm1880_clk = &clks[i];
+
+ hw = bm1880_clk_register_composite(bm1880_clk, sys_base);
+ if (IS_ERR(hw)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, bm1880_clk->name);
+ goto err_clk;
+ }
+
+ data->hw_data.hws[clks[i].id] = hw;
+ }
+
+ return 0;
+
+err_clk:
+ while (i--)
+ clk_hw_unregister_composite(data->hw_data.hws[clks[i].id]);
+
+ return PTR_ERR(hw);
+}
+
+static int bm1880_clk_probe(struct platform_device *pdev)
+{
+ struct bm1880_clock_data *clk_data;
+ void __iomem *pll_base, *sys_base;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int num_clks, i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pll_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pll_base))
+ return PTR_ERR(pll_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ sys_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(sys_base))
+ return PTR_ERR(sys_base);
+
+ num_clks = ARRAY_SIZE(bm1880_pll_clks) +
+ ARRAY_SIZE(bm1880_div_clks) +
+ ARRAY_SIZE(bm1880_mux_clks) +
+ ARRAY_SIZE(bm1880_composite_clks) +
+ ARRAY_SIZE(bm1880_gate_clks);
+
+ clk_data = devm_kzalloc(dev, struct_size(clk_data, hw_data.hws,
+ num_clks), GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ clk_data->pll_base = pll_base;
+ clk_data->sys_base = sys_base;
+
+ for (i = 0; i < num_clks; i++)
+ clk_data->hw_data.hws[i] = ERR_PTR(-ENOENT);
+
+ clk_data->hw_data.num = num_clks;
+
+ bm1880_clk_register_plls(bm1880_pll_clks,
+ ARRAY_SIZE(bm1880_pll_clks),
+ clk_data);
+
+ bm1880_clk_register_divs(bm1880_div_clks,
+ ARRAY_SIZE(bm1880_div_clks),
+ clk_data);
+
+ bm1880_clk_register_mux(bm1880_mux_clks,
+ ARRAY_SIZE(bm1880_mux_clks),
+ clk_data);
+
+ bm1880_clk_register_composites(bm1880_composite_clks,
+ ARRAY_SIZE(bm1880_composite_clks),
+ clk_data);
+
+ bm1880_clk_register_gate(bm1880_gate_clks,
+ ARRAY_SIZE(bm1880_gate_clks),
+ clk_data);
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ &clk_data->hw_data);
+}
+
+static const struct of_device_id bm1880_of_match[] = {
+ { .compatible = "bitmain,bm1880-clk", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, bm1880_of_match);
+
+static struct platform_driver bm1880_clk_driver = {
+ .driver = {
+ .name = "bm1880-clk",
+ .of_match_table = bm1880_of_match,
+ },
+ .probe = bm1880_clk_probe,
+};
+module_platform_driver(bm1880_clk_driver);
+
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_DESCRIPTION("Clock driver for Bitmain BM1880 SoC");
+MODULE_LICENSE("GPL v2");
--
2.17.1
next prev parent reply other threads:[~2019-10-26 11:03 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-26 11:02 [PATCH v6 0/7] Add Bitmain BM1880 clock driver Manivannan Sadhasivam
2019-10-26 11:02 ` [PATCH v6 1/7] clk: Zero init clk_init_data in helpers Manivannan Sadhasivam
2019-10-26 11:02 ` [PATCH v6 2/7] clk: Add clk_hw_unregister_composite helper function definition Manivannan Sadhasivam
2019-10-26 11:02 ` [PATCH v6 3/7] dt-bindings: clock: Add devicetree binding for BM1880 SoC Manivannan Sadhasivam
2019-10-26 11:02 ` [PATCH v6 4/7] arm64: dts: bitmain: Add clock controller support " Manivannan Sadhasivam
2019-10-26 11:02 ` [PATCH v6 5/7] arm64: dts: bitmain: Source common clock for UART controllers Manivannan Sadhasivam
2019-10-26 11:02 ` Manivannan Sadhasivam [this message]
2019-10-29 9:01 ` [PATCH v6 6/7] clk: Add common clock driver for BM1880 SoC kbuild test robot
2019-10-30 3:44 ` kbuild test robot
2019-10-26 11:02 ` [PATCH v6 7/7] MAINTAINERS: Add entry for BM1880 SoC clock driver Manivannan Sadhasivam
2019-11-13 22:21 ` [PATCH v6 0/7] Add Bitmain BM1880 " Stephen Boyd
2019-11-14 5:34 ` Manivannan Sadhasivam
2019-11-14 5:50 ` Stephen Boyd
2019-11-14 6:09 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191026110253.18426-7-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=alec.lin@bitmain.com \
--cc=darren.tsao@bitmain.com \
--cc=devicetree@vger.kernel.org \
--cc=fisher.cheng@bitmain.com \
--cc=haitao.suo@bitmain.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).