From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>,
Doug Berger <opendmb@gmail.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 4.9 18/49] net: bcmgenet: Set phydev->dev_flags only for internal PHYs
Date: Sun, 27 Oct 2019 22:00:56 +0100 [thread overview]
Message-ID: <20191027203133.052186421@linuxfoundation.org> (raw)
In-Reply-To: <20191027203119.468466356@linuxfoundation.org>
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ]
phydev->dev_flags is entirely dependent on the PHY device driver which
is going to be used, setting the internal GENET PHY revision in those
bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver
being used.
Fixes: 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/genet/bcmmii.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -346,11 +346,12 @@ int bcmgenet_mii_probe(struct net_device
struct bcmgenet_priv *priv = netdev_priv(dev);
struct device_node *dn = priv->pdev->dev.of_node;
struct phy_device *phydev;
- u32 phy_flags;
+ u32 phy_flags = 0;
int ret;
/* Communicate the integrated PHY revision */
- phy_flags = priv->gphy_rev;
+ if (priv->internal_phy)
+ phy_flags = priv->gphy_rev;
/* Initialize link state variables that bcmgenet_mii_setup() uses */
priv->old_link = -1;
next prev parent reply other threads:[~2019-10-27 21:05 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-27 21:00 [PATCH 4.9 00/49] 4.9.198-stable review Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 01/49] scsi: ufs: skip shutdown if hba is not powered Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 02/49] scsi: megaraid: disable device when probe failed after enabled device Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 03/49] scsi: qla2xxx: Fix unbound sleep in fcport delete path Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 04/49] ARM: OMAP2+: Fix missing reset done flag for am3 and am43 Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 05/49] ARM: dts: am4372: Set memory bandwidth limit for DISPC Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 06/49] MIPS: dts: ar9331: fix interrupt-controller size Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 07/49] nl80211: fix null pointer dereference Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 08/49] mac80211: fix txq " Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 09/49] mips: Loongson: Fix the link time qualifier of serial_exit() Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 10/49] net: hisilicon: Fix usage of uninitialized variable in function mdio_sc_cfg_reg_write() Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 11/49] namespace: fix namespace.pl script to support relative paths Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 12/49] Revert "drm/radeon: Fix EEH during kexec" Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 13/49] ocfs2: fix panic due to ocfs2_wq is null Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 14/49] MIPS: Treat Loongson Extensions as ASEs Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 15/49] MIPS: elf_hwcap: Export userspace ASEs Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 16/49] loop: Add LOOP_SET_DIRECT_IO to compat ioctl Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 17/49] net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3 Greg Kroah-Hartman
2019-10-27 21:00 ` Greg Kroah-Hartman [this message]
2019-10-27 21:00 ` [PATCH 4.9 19/49] sctp: change sctp_prot .no_autobind with true Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 20/49] net: avoid potential infinite loop in tc_ctl_action() Greg Kroah-Hartman
2019-10-27 21:00 ` [PATCH 4.9 21/49] ipv4: Return -ENETUNREACH if we cant create route but saddr is valid Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 22/49] memfd: Fix locking when tagging pins Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 23/49] USB: legousbtower: fix memleak on disconnect Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 24/49] ALSA: hda/realtek - Add support for ALC711 Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 25/49] usb: udc: lpc32xx: fix bad bit shift operation Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 26/49] USB: serial: ti_usb_3410_5052: fix port-close races Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 27/49] USB: ldusb: fix memleak on disconnect Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 28/49] USB: usblp: fix use-after-free " Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 29/49] USB: ldusb: fix read info leaks Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 30/49] MIPS: tlbex: Fix build_restore_pagemask KScratch restore Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 31/49] staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 32/49] scsi: core: try to get module before removing device Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 33/49] Input: da9063 - fix capability and drop KEY_SLEEP Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 34/49] ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 35/49] cfg80211: wext: avoid copying malformed SSIDs Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 36/49] mac80211: Reject malformed SSID elements Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 37/49] drm/edid: Add 6 bpc quirk for SDC panel in Lenovo G50 Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 38/49] scsi: zfcp: fix reaction on bit error threshold notification Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 39/49] mm/slub: fix a deadlock in show_slab_objects() Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 40/49] xtensa: drop EXPORT_SYMBOL for outs*/ins* Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 41/49] parisc: Fix vmap memory leak in ioremap()/iounmap() Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 42/49] CIFS: avoid using MID 0xFFFF Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 43/49] btrfs: block-group: Fix a memory leak due to missing btrfs_put_block_group() Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 44/49] memstick: jmb38x_ms: Fix an error handling path in jmb38x_ms_probe() Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 45/49] cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 46/49] xen/netback: fix error path of xenvif_connect_data() Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 47/49] PCI: PM: Fix pci_power_up() Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 48/49] Revert "net: sit: fix memory leak in sit_init_net()" Greg Kroah-Hartman
2019-10-27 21:01 ` [PATCH 4.9 49/49] RDMA/cxgb4: Do not dma memory off of the stack Greg Kroah-Hartman
2019-10-28 5:35 ` [PATCH 4.9 00/49] 4.9.198-stable review kernelci.org bot
2019-10-28 9:05 ` Didik Setiawan
2019-10-28 13:34 ` Guenter Roeck
2019-10-28 21:37 ` Jon Hunter
2019-10-29 15:17 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191027203133.052186421@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=opendmb@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).