linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>,
	Anders Roxell <anders.roxell@linaro.org>,
	Eyal Reizer <eyalr@ti.com>, Guy Mishol <guym@ti.com>,
	John Stultz <john.stultz@linaro.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-omap@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 5.3 33/81] ARM: dts: Use level interrupt for omap4 & 5 wlcore
Date: Wed, 30 Oct 2019 11:48:39 -0400	[thread overview]
Message-ID: <20191030154928.9432-33-sashal@kernel.org> (raw)
In-Reply-To: <20191030154928.9432-1-sashal@kernel.org>

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 087a2b7ec973f6f30f6e7b72cb50b6f7734ffdd2 ]

Commit 572cf7d7b07d ("ARM: dts: Improve omap l4per idling with wlcore edge
sensitive interrupt") changed wlcore interrupts to use edge interrupt based
on what's specified in the wl1835mod.pdf data sheet.

However, there are still cases where we can have lost interrupts as
described in omap_gpio_unidle(). And using a level interrupt instead of edge
interrupt helps as we avoid the check for untriggered GPIO interrupts in
omap_gpio_unidle().

And with commit e6818d29ea15 ("gpio: gpio-omap: configure edge detection
for level IRQs for idle wakeup") GPIOs idle just fine with level interrupts.

Let's change omap4 and 5 wlcore users back to using level interrupt
instead of edge interrupt. Let's not change the others as I've only seen
this on omap4 and 5, probably because the other SoCs don't have l4per idle
independent of the CPUs.

Fixes: 572cf7d7b07d ("ARM: dts: Improve omap l4per idling with wlcore edge sensitive interrupt")
Depends-on: e6818d29ea15 ("gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup")
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Eyal Reizer <eyalr@ti.com>
Cc: Guy Mishol <guym@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap4-droid4-xt894.dts       | 2 +-
 arch/arm/boot/dts/omap4-panda-common.dtsi      | 2 +-
 arch/arm/boot/dts/omap4-sdp.dts                | 2 +-
 arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi | 2 +-
 arch/arm/boot/dts/omap5-board-common.dtsi      | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 4454449de00c0..a40fe8d49da64 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -369,7 +369,7 @@
 		compatible = "ti,wl1285", "ti,wl1283";
 		reg = <2>;
 		/* gpio_100 with gpmc_wait2 pad as wakeirq */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>,
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
 				      <&omap4_pmx_core 0x4e>;
 		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <26000000>;
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 14be2ecb62b1f..55ea8b6189af5 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -474,7 +474,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		/* gpio_53 with gpmc_ncs3 pad as wakeup */
-		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>,
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
 				      <&omap4_pmx_core 0x3a>;
 		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <38400000>;
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 3c274965ff40a..91480ac1f3286 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -512,7 +512,7 @@
 		compatible = "ti,wl1281";
 		reg = <2>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
index 6dbbc9b3229cc..d0032213101e6 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -69,7 +69,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
 		ref-clock-frequency = <38400000>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 7fff555ee3943..68ac04641bdb1 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -362,7 +362,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&wlcore_irq_pin>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <14 IRQ_TYPE_EDGE_RISING>;	/* gpio 14 */
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
 		ref-clock-frequency = <26000000>;
 	};
 };
-- 
2.20.1


  parent reply	other threads:[~2019-10-30 15:52 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-30 15:48 [PATCH AUTOSEL 5.3 01/81] regulator: of: fix suspend-min/max-voltage parsing Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 02/81] ASoC: samsung: arndale: Add missing OF node dereferencing Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 03/81] ASoC: wm8994: Do not register inapplicable controls for WM1811 Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 04/81] regulator: da9062: fix suspend_enable/disable preparation Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 05/81] ASoC: topology: Fix a signedness bug in soc_tplg_dapm_widget_create() Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 06/81] arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 07/81] arm64: dts: allwinner: a64: Drop PMU node Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 08/81] arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 09/81] arm64: dts: Fix gpio to pinmux mapping Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 10/81] regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 11/81] pinctrl: intel: Allocate IRQ chip dynamic Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 12/81] ASoC: SOF: loader: fix kernel oops on firmware boot failure Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 13/81] ASoC: SOF: topology: fix parse fail issue for byte/bool tuple types Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 14/81] ASoC: SOF: Intel: hda: fix warnings during FW load Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 15/81] ASoC: SOF: Intel: initialise and verify FW crash dump data Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 16/81] ASoC: SOF: Intel: hda: Disable DMI L1 entry during capture Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 17/81] ASoC: rt5682: add NULL handler to set_jack function Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 18/81] ASoC: intel: sof_rt5682: add remove function to disable jack Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 19/81] ASoC: intel: bytcr_rt5651: add null check to support_button_press Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 20/81] regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 21/81] ASoC: wm_adsp: Don't generate kcontrols without READ flags Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 22/81] ASoc: rockchip: i2s: Fix RPM imbalance Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 23/81] arm64: dts: rockchip: fix Rockpro64 RK808 interrupt line Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 24/81] ARM: dts: logicpd-torpedo-som: Remove twl_keypad Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 25/81] arm64: dts: rockchip: fix RockPro64 vdd-log regulator settings Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 26/81] arm64: dts: rockchip: fix RockPro64 sdhci settings Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 27/81] pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable() Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 28/81] pinctrl: stmfx: fix null pointer on remove Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 29/81] arm64: dts: zii-ultra: fix ARM regulator states Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 30/81] ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 31/81] ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2 Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 32/81] ASoC: simple_card_utils.h: Fix potential multiple redefinition error Sasha Levin
2019-10-30 15:48 ` Sasha Levin [this message]
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 34/81] ARM: mm: fix alignment handler faults under memory pressure Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 35/81] scsi: qla2xxx: fix a potential NULL pointer dereference Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 36/81] scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 37/81] scsi: sni_53c710: fix compilation error Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 38/81] scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 39/81] ARM: 8908/1: add __always_inline to functions called from __get_user_check() Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 40/81] ARM: 8914/1: NOMMU: Fix exc_ret for XIP Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 41/81] arm64: dts: rockchip: fix RockPro64 sdmmc settings Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 42/81] arm64: dts: rockchip: Fix usb-c on Hugsun X99 TV Box Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 43/81] arm64: dts: lx2160a: Correct CPU core idle state name Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 44/81] ARM: dts: imx6q-logicpd: Re-Enable SNVS power key Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 45/81] ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 46/81] ARM: dts: imx7s: Correct GPT's ipg clock source Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 47/81] arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 48/81] arm64: dts: imx8mm: " Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 49/81] perf tools: Fix resource leak of closedir() on the error paths Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 50/81] perf c2c: Fix memory leak in build_cl_output() Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 51/81] USB: legousbtower: fix a signedness bug in tower_probe() Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 52/81] 8250-men-mcb: fix error checking when get_num_ports returns -ENODEV Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 53/81] perf kmem: Fix memory leak in compact_gfp_flags() Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 54/81] ARM: davinci: dm365: Fix McBSP dma_slave_map entry Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 55/81] drm/amdgpu: fix potential VM faults Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 56/81] drm/amdgpu: fix error handling in amdgpu_bo_list_create Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 57/81] scsi: target: core: Do not overwrite CDB byte 1 Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 58/81] scsi: hpsa: add missing hunks in reset-patch Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 59/81] ASoC: Intel: sof-rt5682: add a check for devm_clk_get Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 60/81] ASoC: SOF: control: return true when kcontrol values change Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 61/81] tracing: Fix "gfp_t" format for synthetic events Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 62/81] ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 63/81] i2c: aspeed: fix master pending state handling Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191030154928.9432-33-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=anders.roxell@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eyalr@ti.com \
    --cc=guym@ti.com \
    --cc=john.stultz@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).