From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>,
Ray Jui <ray.jui@broadcom.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Sasha Levin <sashal@kernel.org>,
devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 05/38] arm64: dts: Fix gpio to pinmux mapping
Date: Wed, 30 Oct 2019 11:53:33 -0400 [thread overview]
Message-ID: <20191030155406.10109-5-sashal@kernel.org> (raw)
In-Reply-To: <20191030155406.10109-1-sashal@kernel.org>
From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
[ Upstream commit 965f6603e3335a953f4f876792074cb36bf65f7f ]
There are total of 151 non-secure gpio (0-150) and four
pins of pinmux (91, 92, 93 and 94) are not mapped to any
gpio pin, hence update same in DT.
Fixes: 8aa428cc1e2e ("arm64: dts: Add pinctrl DT nodes for Stingray SOC")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi | 5 +++--
arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 3 +--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
index 8a3a770e8f2ce..56789ccf94545 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -42,13 +42,14 @@
pinmux: pinmux@14029c {
compatible = "pinctrl-single";
- reg = <0x0014029c 0x250>;
+ reg = <0x0014029c 0x26c>;
#address-cells = <1>;
#size-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xf>;
pinctrl-single,gpio-range = <
- &range 0 154 MODE_GPIO
+ &range 0 91 MODE_GPIO
+ &range 95 60 MODE_GPIO
>;
range: gpio-range {
#pinctrl-single,gpio-range-cells = <3>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index e283480bfc7e5..84101ea1fd2cb 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -463,8 +463,7 @@
<&pinmux 108 16 27>,
<&pinmux 135 77 6>,
<&pinmux 141 67 4>,
- <&pinmux 145 149 6>,
- <&pinmux 151 91 4>;
+ <&pinmux 145 149 6>;
};
i2c1: i2c@e0000 {
--
2.20.1
next prev parent reply other threads:[~2019-10-30 15:54 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-30 15:53 [PATCH AUTOSEL 4.19 01/38] regulator: of: fix suspend-min/max-voltage parsing Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 02/38] ASoC: wm8994: Do not register inapplicable controls for WM1811 Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 03/38] arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 04/38] arm64: dts: allwinner: a64: sopine-baseboard: " Sasha Levin
2019-10-30 15:53 ` Sasha Levin [this message]
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 06/38] regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 07/38] ASoC: rt5682: add NULL handler to set_jack function Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 08/38] regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 09/38] ASoC: wm_adsp: Don't generate kcontrols without READ flags Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 10/38] ASoc: rockchip: i2s: Fix RPM imbalance Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 11/38] ARM: dts: logicpd-torpedo-som: Remove twl_keypad Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 12/38] pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable() Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 13/38] ARM: mm: fix alignment handler faults under memory pressure Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 14/38] scsi: qla2xxx: fix a potential NULL pointer dereference Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 15/38] scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 16/38] scsi: sni_53c710: fix compilation error Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 17/38] scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 18/38] ARM: 8914/1: NOMMU: Fix exc_ret for XIP Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 19/38] ARM: dts: imx7s: Correct GPT's ipg clock source Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 20/38] perf c2c: Fix memory leak in build_cl_output() Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 21/38] USB: legousbtower: fix a signedness bug in tower_probe() Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 22/38] 8250-men-mcb: fix error checking when get_num_ports returns -ENODEV Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 23/38] perf kmem: Fix memory leak in compact_gfp_flags() Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 24/38] ARM: davinci: dm365: Fix McBSP dma_slave_map entry Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 25/38] drm/amdgpu: fix potential VM faults Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 26/38] scsi: target: core: Do not overwrite CDB byte 1 Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 27/38] tracing: Fix "gfp_t" format for synthetic events Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 28/38] ARM: 8926/1: v7m: remove register save to stack before svc Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 29/38] of: unittest: fix memory leak in unittest_data_add Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 30/38] MIPS: bmips: mark exception vectors as char arrays Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 31/38] irqchip/gic-v3-its: Use the exact ITSList for VMOVP Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 32/38] i2c: stm32f7: fix first byte to send in slave mode Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 33/38] i2c: stm32f7: fix a race in slave mode with arbitration loss irq Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 34/38] i2c: stm32f7: remove warning when compiling with W=1 Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 35/38] cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 36/38] nbd: protect cmd->status with cmd->lock Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 37/38] nbd: handle racing with error'ed out commands Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 38/38] nbd: verify socket is supported during setup Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191030155406.10109-5-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=ray.jui@broadcom.com \
--cc=rayagonda.kokatanur@broadcom.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).