linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Schrempf Frieder <frieder.schrempf@kontron.de>
To: Krzysztof Kozlowski <krzk@kernel.org>,
	Fabio Estevam <festevam@gmail.com>,
	Schrempf Frieder <frieder.schrempf@kontron.de>,
	Mark Rutland <mark.rutland@arm.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 02/11] ARM: dts: Add support for two more Kontron SoMs N6311 and N6411
Date: Thu, 31 Oct 2019 14:24:05 +0000	[thread overview]
Message-ID: <20191031142112.12431-3-frieder.schrempf@kontron.de> (raw)
In-Reply-To: <20191031142112.12431-1-frieder.schrempf@kontron.de>

From: Frieder Schrempf <frieder.schrempf@kontron.de>

The N6311 and the N6411 SoM are similar to the Kontron N6310 SoM.
They are pin-compatible, but feature a larger RAM and NAND flash
(512MiB instead of 256MiB). Further, the N6411 has an i.MX6ULL SoC,
instead of an i.MX6UL.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../boot/dts/imx6ul-kontron-n6311-som.dtsi    | 40 +++++++++++++++++++
 .../boot/dts/imx6ull-kontron-n6411-som.dtsi   | 40 +++++++++++++++++++
 2 files changed, 80 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi

diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
new file mode 100644
index 000000000000..a095a7654ac6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-kontron-n6x1x-som-common.dtsi"
+
+/ {
+	model = "Kontron N6311 SOM";
+	compatible = "kontron,imx6ul-n6311-som", "fsl,imx6ul";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+};
+
+&qspi {
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+
+		partition@0 {
+			label = "ubi1";
+			reg = <0x00000000 0x08000000>;
+		};
+
+		partition@8000000 {
+			label = "ubi2";
+			reg = <0x08000000 0x18000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
new file mode 100644
index 000000000000..b7e984284e1a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-kontron-n6x1x-som-common.dtsi"
+
+/ {
+	model = "Kontron N6411 SOM";
+	compatible = "kontron,imx6ull-n6311-som", "fsl,imx6ull";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+};
+
+&qspi {
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+
+		partition@0 {
+			label = "ubi1";
+			reg = <0x00000000 0x08000000>;
+		};
+
+		partition@8000000 {
+			label = "ubi2";
+			reg = <0x08000000 0x18000000>;
+		};
+	};
+};
-- 
2.17.1

  parent reply	other threads:[~2019-10-31 14:24 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-31 14:23 [PATCH v3 00/11] Add support for more Kontron i.MX6UL/ULL SoMs and boards Schrempf Frieder
2019-10-31 14:24 ` [PATCH v3 01/11] ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file Schrempf Frieder
2019-10-31 14:24 ` Schrempf Frieder [this message]
2019-10-31 14:24 ` [PATCH v3 03/11] ARM: dts: imx6ul-kontron-n6310-s: Move common " Schrempf Frieder
2019-10-31 14:24 ` [PATCH v3 04/11] ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and 'N6411 S' Schrempf Frieder
2019-10-31 14:24 ` [PATCH v3 05/11] ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path' Schrempf Frieder
2019-10-31 14:24 ` [PATCH v3 06/11] ARM: dts: imx6ul-kontron-n6x1x-s: Specify bus-width for SD card and eMMC Schrempf Frieder
2019-11-04  7:29   ` Shawn Guo
2019-11-04  7:40     ` Schrempf Frieder
2019-10-31 14:24 ` [PATCH v3 07/11] ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes Schrempf Frieder
2019-11-04  7:31   ` Shawn Guo
2019-11-04  7:53     ` Schrempf Frieder
2019-10-31 14:24 ` [PATCH v3 08/11] ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation Schrempf Frieder
2019-11-04  7:33   ` Shawn Guo
2019-11-04  7:53     ` Schrempf Frieder
2019-10-31 14:24 ` [PATCH v3 09/11] ARM: dts: imx6ul-kontron-n6x1x-s: Disable the snvs-poweroff driver Schrempf Frieder
2019-11-04  7:43   ` Shawn Guo
2019-11-04  8:06     ` Schrempf Frieder
2019-11-04 11:18       ` Schrempf Frieder
2019-11-04 12:45         ` Shawn Guo
2019-11-04 13:14           ` Schrempf Frieder
2019-10-31 14:24 ` [PATCH v3 10/11] dt-bindings: arm: fsl: Add more Kontron i.MX6UL/ULL compatibles Schrempf Frieder
2019-10-31 14:24 ` [PATCH v3 11/11] MAINTAINERS: Add an entry for Kontron Electronics ARM board support Schrempf Frieder
2019-11-04  7:45   ` Shawn Guo
2019-11-04  8:16     ` Schrempf Frieder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191031142112.12431-3-frieder.schrempf@kontron.de \
    --to=frieder.schrempf@kontron.de \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).