linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adrian Ratiu <adrian.ratiu@collabora.com>
To: linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-rockchip@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	kernel@collabora.com
Subject: [PATCH 0/4] Genericize DW MIPI DSI bridge and add i.MX 6 driver
Date: Thu, 31 Oct 2019 16:26:29 +0200	[thread overview]
Message-ID: <20191031142633.12460-1-adrian.ratiu@collabora.com> (raw)

Having a generic Synopsis DesignWare MIPI-DSI host controller bridge
driver is a very good idea, however the current implementation has
hardcoded quite a lot of the register layouts used by the two supported
SoC vendors, STM and Rockchip, which use IP cores v1.30 and v1.31.

This makes it hard to support other SoC vendors like the FSL/NXP i.MX 6
which use older v1.01 cores or future versions because, based on history,
layout changes should also be expected in new DSI versions / SoCs.

This patch series converts the bridge and platform drivers to access
registers via generic regmap APIs and allows each platform driver to
configure its register layout via struct reg_fields, then adds support
for the host controller found on i.MX 6.

I only have i.MX hardware with MIPI-DSI panel and relevant documentation
available for testing so I'll really appreciate it if someone could test
the series on Rockchip and STM... eyeballing register fields could only
get me so far, so sorry in advance for any breakage!

Many thanks to Boris Brezillon <boris.brezillon@collabora.com> for
suggesting the regmap solution and to Liu Ying <Ying.Liu@freescale.com>
for doing the initial i.MX platform driver implementation.

This series applies on top of latest linux-next tree, next-20191031.

Adrian Ratiu (4):
  drm: bridge: dw_mipi_dsi: access registers via a regmap
  drm: bridge: dw_mipi_dsi: abstract register access using reg_fields
  drm: imx: Add i.MX 6 MIPI DSI host driver
  dt-bindings: display: add IMX MIPI DSI host controller doc

 .../bindings/display/imx/mipi-dsi.txt         |  56 ++
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 518 +++++++++---------
 drivers/gpu/drm/imx/Kconfig                   |   7 +
 drivers/gpu/drm/imx/Makefile                  |   1 +
 drivers/gpu/drm/imx/dw_mipi_dsi-imx.c         | 502 +++++++++++++++++
 .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c   | 154 +++++-
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c         | 160 +++++-
 include/drm/bridge/dw_mipi_dsi.h              |  60 +-
 8 files changed, 1185 insertions(+), 273 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/imx/mipi-dsi.txt
 create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx.c

-- 
2.23.0


             reply	other threads:[~2019-10-31 14:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-31 14:26 Adrian Ratiu [this message]
2019-10-31 14:26 ` [PATCH 1/4] drm: bridge: dw_mipi_dsi: access registers via a regmap Adrian Ratiu
2019-11-04  9:15   ` Neil Armstrong
2019-11-04 12:03     ` Adrian Ratiu
2019-11-04 15:46       ` Neil Armstrong
2019-10-31 14:26 ` [PATCH 2/4] drm: bridge: dw_mipi_dsi: abstract register access using reg_fields Adrian Ratiu
2019-10-31 14:26 ` [PATCH 3/4] drm: imx: Add i.MX 6 MIPI DSI host driver Adrian Ratiu
2019-10-31 14:26 ` [PATCH 4/4] dt-bindings: display: add IMX MIPI DSI host controller doc Adrian Ratiu
2019-10-31 17:07 ` [PATCH 0/4] Genericize DW MIPI DSI bridge and add i.MX 6 driver Emil Velikov
2019-10-31 19:10   ` Adrian Ratiu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191031142633.12460-1-adrian.ratiu@collabora.com \
    --to=adrian.ratiu@collabora.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kernel@collabora.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).