From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH net] net: dsa: bcm_sf2: Fix IMP setup for port different than 8
Date: Thu, 31 Oct 2019 15:54:05 -0700 [thread overview]
Message-ID: <20191031225406.10576-1-f.fainelli@gmail.com> (raw)
Since it became possible for the DSA core to use a CPU port different
than 8, our bcm_sf2_imp_setup() function was broken because it assumes
that registers are applicable to port 8. In particular, the port's MAC
is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS
bits if we are not configured for port 8.
Fixes: 9f91484f6fcc ("net: dsa: make "label" property optional for dsa2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/bcm_sf2.c | 36 +++++++++++++++++++++---------------
1 file changed, 21 insertions(+), 15 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 26509fa37a50..d44651ad520c 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -37,22 +37,11 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
unsigned int i;
u32 reg, offset;
- if (priv->type == BCM7445_DEVICE_ID)
- offset = CORE_STS_OVERRIDE_IMP;
- else
- offset = CORE_STS_OVERRIDE_IMP2;
-
/* Enable the port memories */
reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
reg &= ~P_TXQ_PSM_VDD(port);
core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
- /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
- reg = core_readl(priv, CORE_IMP_CTL);
- reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
- reg &= ~(RX_DIS | TX_DIS);
- core_writel(priv, reg, CORE_IMP_CTL);
-
/* Enable forwarding */
core_writel(priv, SW_FWDG_EN, CORE_SWMODE);
@@ -71,10 +60,27 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
b53_brcm_hdr_setup(ds, port);
- /* Force link status for IMP port */
- reg = core_readl(priv, offset);
- reg |= (MII_SW_OR | LINK_STS);
- core_writel(priv, reg, offset);
+ if (port == 8) {
+ if (priv->type == BCM7445_DEVICE_ID)
+ offset = CORE_STS_OVERRIDE_IMP;
+ else
+ offset = CORE_STS_OVERRIDE_IMP2;
+
+ /* Force link status for IMP port */
+ reg = core_readl(priv, offset);
+ reg |= (MII_SW_OR | LINK_STS);
+ core_writel(priv, reg, offset);
+
+ /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
+ reg = core_readl(priv, CORE_IMP_CTL);
+ reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
+ reg &= ~(RX_DIS | TX_DIS);
+ core_writel(priv, reg, CORE_IMP_CTL);
+ } else {
+ reg = core_readl(priv, CORE_G_PCTL_PORT(port));
+ reg &= ~(RX_DIS | TX_DIS);
+ core_writel(priv, reg, CORE_G_PCTL_PORT(port));
+ }
}
static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable)
--
2.17.1
next reply other threads:[~2019-10-31 22:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-31 22:54 Florian Fainelli [this message]
2019-11-01 22:09 ` [PATCH net] net: dsa: bcm_sf2: Fix IMP setup for port different than 8 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191031225406.10576-1-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).