linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.9 43/62] USB: serial: whiteheat: fix line-speed endianness
Date: Mon,  4 Nov 2019 22:45:05 +0100	[thread overview]
Message-ID: <20191104211947.080300933@linuxfoundation.org> (raw)
In-Reply-To: <20191104211901.387893698@linuxfoundation.org>

From: Johan Hovold <johan@kernel.org>

commit 84968291d7924261c6a0624b9a72f952398e258b upstream.

Add missing endianness conversion when setting the line speed so that
this driver might work also on big-endian machines.

Also use an unsigned format specifier in the corresponding debug
message.

Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191029102354.2733-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/whiteheat.c |    9 ++++++---
 drivers/usb/serial/whiteheat.h |    2 +-
 2 files changed, 7 insertions(+), 4 deletions(-)

--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -681,6 +681,7 @@ static void firm_setup_port(struct tty_s
 	struct device *dev = &port->dev;
 	struct whiteheat_port_settings port_settings;
 	unsigned int cflag = tty->termios.c_cflag;
+	speed_t baud;
 
 	port_settings.port = port->port_number + 1;
 
@@ -741,11 +742,13 @@ static void firm_setup_port(struct tty_s
 	dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff);
 
 	/* get the baud rate wanted */
-	port_settings.baud = tty_get_baud_rate(tty);
-	dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud);
+	baud = tty_get_baud_rate(tty);
+	port_settings.baud = cpu_to_le32(baud);
+	dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud);
 
 	/* fixme: should set validated settings */
-	tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud);
+	tty_encode_baud_rate(tty, baud, baud);
+
 	/* handle any settings that aren't specified in the tty structure */
 	port_settings.lloop = 0;
 
--- a/drivers/usb/serial/whiteheat.h
+++ b/drivers/usb/serial/whiteheat.h
@@ -91,7 +91,7 @@ struct whiteheat_simple {
 
 struct whiteheat_port_settings {
 	__u8	port;		/* port number (1 to N) */
-	__u32	baud;		/* any value 7 - 460800, firmware calculates
+	__le32	baud;		/* any value 7 - 460800, firmware calculates
 				   best fit; arrives little endian */
 	__u8	bits;		/* 5, 6, 7, or 8 */
 	__u8	stop;		/* 1 or 2, default 1 (2 = 1.5 if bits = 5) */



  parent reply	other threads:[~2019-11-04 21:51 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-04 21:44 [PATCH 4.9 00/62] 4.9.199-stable review Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 01/62] dm snapshot: use mutex instead of rw_semaphore Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 02/62] dm snapshot: introduce account_start_copy() and account_end_copy() Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 03/62] dm snapshot: rework COW throttling to fix deadlock Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 04/62] dm: Use kzalloc for all structs with embedded biosets/mempools Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 05/62] sc16is7xx: Fix for "Unexpected interrupt: 8" Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 06/62] HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor override Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 07/62] x86/cpu: Add Atom Tremont (Jacobsville) Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 08/62] HID: i2c-hid: Add Odys Winbook 13 to descriptor override Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 09/62] scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 10/62] usb: handle warm-reset port requests on hub resume Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 11/62] rtc: pcf8523: set xtal load capacitance from DT Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 12/62] exec: load_script: Do not exec truncated interpreter path Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 13/62] iio: fix center temperature of bmc150-accel-core Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 14/62] perf map: Fix overlapped map handling Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 15/62] perf jevents: Fix period for Intel fixed counters Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 16/62] staging: rtl8188eu: fix null dereference when kzalloc fails Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 17/62] RDMA/iwcm: Fix a lock inversion issue Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 18/62] gpio: max77620: Use correct unit for debounce times Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 19/62] fs: cifs: mute -Wunused-const-variable message Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 20/62] serial: mctrl_gpio: Check for NULL pointer Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 21/62] efi/cper: Fix endianness of PCIe class code Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 22/62] efi/x86: Do not clean dummy variable in kexec path Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 23/62] ocfs2: clear zero in unaligned direct IO Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 24/62] fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry() Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 25/62] fs: ocfs2: fix a possible null-pointer dereference in ocfs2_write_end_nolock() Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 26/62] fs: ocfs2: fix a possible null-pointer dereference in ocfs2_info_scan_inode_alloc() Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 27/62] MIPS: fw: sni: Fix out of bounds init of o32 stack Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 28/62] NFSv4: Fix leak of clp->cl_acceptor string Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 29/62] s390/uaccess: avoid (false positive) compiler warnings Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 30/62] tracing: Initialize iter->seq after zeroing in tracing_read_pipe() Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 31/62] USB: legousbtower: fix a signedness bug in tower_probe() Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 32/62] thunderbolt: Use 32-bit writes when writing ring producer/consumer Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 33/62] ath6kl: fix a NULL-ptr-deref bug in ath6kl_usb_alloc_urb_from_pipe() Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 34/62] fuse: flush dirty data/metadata before non-truncate setattr Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 35/62] fuse: truncate pending writes on O_TRUNC Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 36/62] ALSA: bebob: Fix prototype of helper function to return negative value Greg Kroah-Hartman
2019-11-04 21:44 ` [PATCH 4.9 37/62] UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments") Greg Kroah-Hartman
2019-11-05 14:31   ` Oliver Neukum
2019-11-06  0:11     ` Sasha Levin
2019-11-06  7:45       ` Oliver Neukum
2019-11-06 11:17         ` Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 38/62] USB: gadget: Reject endpoints with 0 maxpacket value Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 39/62] usb-storage: Revert commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 40/62] USB: ldusb: fix ring-buffer locking Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 41/62] USB: ldusb: fix control-message timeout Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 42/62] USB: serial: whiteheat: fix potential slab corruption Greg Kroah-Hartman
2019-11-04 21:45 ` Greg Kroah-Hartman [this message]
2019-11-04 21:45 ` [PATCH 4.9 44/62] HID: i2c-hid: add Trekstor Primebook C11B to descriptor override Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 45/62] HID: Fix assumption that devices have inputs Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 46/62] HID: fix error message in hid_open_report() Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 47/62] nl80211: fix validation of mesh path nexthop Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 48/62] s390/cmm: fix information leak in cmm_timeout_handler() Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 49/62] rtlwifi: Fix potential overflow on P2P code Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 50/62] dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idle Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 51/62] llc: fix sk_buff leak in llc_sap_state_process() Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 52/62] llc: fix sk_buff leak in llc_conn_service() Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 53/62] bonding: fix potential NULL deref in bond_update_slave_arr Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 54/62] net: usb: sr9800: fix uninitialized local variable Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 55/62] sch_netem: fix rcu splat in netem_enqueue() Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 56/62] sctp: fix the issue that flags are ignored when using kernel_connect Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 57/62] sctp: not bind the socket in sctp_connect Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 58/62] xfs: Correctly invert xfs_buftarg LRU isolation logic Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 59/62] ALSA: timer: Follow standard EXPORT_SYMBOL() declarations Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 60/62] ALSA: timer: Limit max instances per timer Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 61/62] ALSA: timer: Simplify error path in snd_timer_open() Greg Kroah-Hartman
2019-11-04 21:45 ` [PATCH 4.9 62/62] ALSA: timer: Fix mutex deadlock at releasing card Greg Kroah-Hartman
2019-11-05  5:56 ` [PATCH 4.9 00/62] 4.9.199-stable review kernelci.org bot
2019-11-05  7:05 ` Naresh Kamboju
2019-11-05 14:24 ` Guenter Roeck
2019-11-05 17:01 ` shuah
2019-11-05 23:37 ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191104211947.080300933@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).