linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: linux-pci@vger.kernel.org,
	Stefano Stabellini <sstabellini@kernel.org>,
	KarimAllah Ahmed <karahmed@amazon.de>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH 4/6] xen-platform: Convert to generic power management
Date: Tue, 5 Nov 2019 15:51:29 -0600	[thread overview]
Message-ID: <20191105215129.GA36983@google.com> (raw)
In-Reply-To: <20191104152330.GA104689@google.com>

On Mon, Nov 04, 2019 at 09:23:30AM -0600, Bjorn Helgaas wrote:
> On Fri, Nov 01, 2019 at 03:45:56PM -0500, Bjorn Helgaas wrote:
> > From: Bjorn Helgaas <bhelgaas@google.com>
> > 
> > Convert xen-platform from the legacy PCI power management callbacks to the
> > generic operations.  This is one step towards removing support for the
> > legacy PCI callbacks.
> > 
> > The generic .resume_noirq() operation is called by pci_pm_resume_noirq() at
> > the same point the legacy PCI .resume_early() callback was, so this patch
> > should not change the xen-platform behavior.
> > 
> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> 
> I made the tweak below to fix the compile error.  I could swear I
> built this, but I must have been mistaken.
> 
> > Cc: Stefano Stabellini <sstabellini@kernel.org>
> > Cc: KarimAllah Ahmed <karahmed@amazon.de>

I applied this to pci/pm for v5.5 as part of the larger series:
https://lore.kernel.org/r/20191101204558.210235-1-helgaas@kernel.org

> > ---
> >  drivers/xen/platform-pci.c | 10 +++++++---
> >  1 file changed, 7 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c
> > index 5e30602fdbad..e06e8769eb84 100644
> > --- a/drivers/xen/platform-pci.c
> > +++ b/drivers/xen/platform-pci.c
> > @@ -168,13 +168,17 @@ static const struct pci_device_id platform_pci_tbl[] = {
> >  	{0,}
> >  };
> >  
> > +static struct dev_pm_ops platform_pm_ops = {
> > +	.resume_noirq =   platform_pci_resume,
> > +};
> > +
> >  static struct pci_driver platform_driver = {
> >  	.name =           DRV_NAME,
> >  	.probe =          platform_pci_probe,
> >  	.id_table =       platform_pci_tbl,
> > -#ifdef CONFIG_PM
> > -	.resume_early =   platform_pci_resume,
> > -#endif
> > +	.driver = {
> > +		.pm =     &platform_pm_ops,
> > +	},
> >  };
> >  
> >  builtin_pci_driver(platform_driver);
> > -- 
> > 2.24.0.rc1.363.gb1bccd3e3d-goog
> 
> diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c
> index e06e8769eb84..59e85e408c23 100644
> --- a/drivers/xen/platform-pci.c
> +++ b/drivers/xen/platform-pci.c
> @@ -74,7 +74,7 @@ static int xen_allocate_irq(struct pci_dev *pdev)
>  			"xen-platform-pci", pdev);
>  }
>  
> -static int platform_pci_resume(struct pci_dev *pdev)
> +static int platform_pci_resume(struct device *dev)
>  {
>  	int err;
>  
> @@ -83,7 +83,7 @@ static int platform_pci_resume(struct pci_dev *pdev)
>  
>  	err = xen_set_callback_via(callback_via);
>  	if (err) {
> -		dev_err(&pdev->dev, "platform_pci_resume failure!\n");
> +		dev_err(dev, "platform_pci_resume failure!\n");
>  		return err;
>  	}
>  	return 0;

  reply	other threads:[~2019-11-05 21:51 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-01 20:45 [PATCH 0/6] PCI/PM: Minor fix and cleanups Bjorn Helgaas
2019-11-01 20:45 ` [PATCH 1/6] PCI/PM: Apply D2 delay as milliseconds, not microseconds Bjorn Helgaas
2019-11-04 10:29   ` Rafael J. Wysocki
2019-11-01 20:45 ` [PATCH 2/6] PCI/PM: Expand PM reset messages to mention D3hot (not just D3) Bjorn Helgaas
2019-11-04 10:29   ` Rafael J. Wysocki
2019-11-01 20:45 ` [PATCH 3/6] PCI/PM: Simplify pci_set_power_state() Bjorn Helgaas
2019-11-04 10:31   ` Rafael J. Wysocki
2019-11-01 20:45 ` [PATCH 4/6] xen-platform: Convert to generic power management Bjorn Helgaas
2019-11-04 10:32   ` Rafael J. Wysocki
2019-11-04 15:23   ` Bjorn Helgaas
2019-11-05 21:51     ` Bjorn Helgaas [this message]
2019-11-01 20:45 ` [PATCH 5/6] PCI/PM: Remove unused pci_driver.resume_early() hook Bjorn Helgaas
2019-11-04 10:33   ` Rafael J. Wysocki
2019-11-01 20:45 ` [PATCH 6/6] PCI/PM: Remove unused pci_driver.suspend_late() hook Bjorn Helgaas
2019-11-04 10:34   ` Rafael J. Wysocki
2019-11-05 21:52 ` [PATCH 0/6] PCI/PM: Minor fix and cleanups Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191105215129.GA36983@google.com \
    --to=helgaas@kernel.org \
    --cc=karahmed@amazon.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rafael.j.wysocki@intel.com \
    --cc=sstabellini@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).