linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <vkoul@kernel.org>, <robh+dt@kernel.org>, <nm@ti.com>,
	<ssantosh@kernel.org>
Cc: <dan.j.williams@intel.com>, <dmaengine@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<grygorii.strashko@ti.com>, <lokeshvutla@ti.com>,
	<t-kristo@ti.com>, <tony@atomide.com>, <j-keerthy@ti.com>
Subject: [PATCH v5 08/15] dt-bindings: dma: ti: Add document for K3 UDMA
Date: Mon, 11 Nov 2019 15:53:23 +0200	[thread overview]
Message-ID: <20191111135330.8235-9-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20191111135330.8235-1-peter.ujfalusi@ti.com>

New binding document for
Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P).

UDMA-P is introduced as part of the K3 architecture and can be found in
AM654 and j721e.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 .../devicetree/bindings/dma/ti/k3-udma.yaml   | 192 ++++++++++++++++++
 1 file changed, 192 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.yaml

diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
new file mode 100644
index 000000000000..5a60c3fc6f5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@ti.com>
+
+description: |
+  The UDMA-P is intended to perform similar (but significantly upgraded)
+  functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P
+  module supports the transmission and reception of various packet types.
+  The UDMA-P is architected to facilitate the segmentation and reassembly of
+  SoC DMA data structure compliant packets to/from smaller data blocks that are
+  natively compatible with the specific requirements of each connected
+  peripheral.
+  Multiple Tx and Rx channels are provided within the DMA which allow multiple
+  segmentation or reassembly operations to be ongoing. The DMA controller
+  maintains state information for each of the channels which allows packet
+  segmentation and reassembly operations to be time division multiplexed between
+  channels in order to share the underlying DMA hardware. An external DMA
+  scheduler is used to control the ordering and rate at which this multiplexing
+  occurs for Transmit operations. The ordering and rate of Receive operations
+  is indirectly controlled by the order in which blocks are pushed into the DMA
+  on the Rx PSI-L interface.
+
+  The UDMA-P also supports acting as both a UTC and UDMA-C for its internal
+  channels. Channels in the UDMA-P can be configured to be either Packet-Based
+  or Third-Party channels on a channel by channel basis.
+
+  All transfers within NAVSS is done between PSI-L source and destination
+  threads.
+  The peripherals serviced by UDMA can be PSI-L native (sa2ul, cpsw, etc) or
+  legacy, non PSI-L native peripherals. In the later case a special, small PDMA
+  is tasked to act as a bridge between the PSI-L fabric and the legacy
+  peripheral.
+
+  PDMAs can be configured via UDMAP peer registers to match with the
+  configuration of the legacy peripheral.
+
+allOf:
+  - $ref: "../dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: |
+      The cell is the PSI-L  thread ID of the remote (to UDMAP) end.
+      Valid ranges for thread ID depends on the data movement direction:
+      for source thread IDs (rx): 0 - 0x7fff
+      for destination thread IDs (tx): 0x8000 - 0xffff
+
+      PLease refer to the device documentation for the PSI-L thread map and also
+      the PSI-L peripheral chapter for the correct thread ID.
+
+  compatible:
+    oneOf:
+      - description: for AM654
+        items:
+          - enum:
+              - ti,am654-navss-main-udmap
+              - ti,am654-navss-mcu-udmap
+
+      - description: for J721E
+        items:
+          - enum:
+              - ti,j721e-navss-main-udmap
+              - ti,j721e-navss-mcu-udmap
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+   items:
+     - const: gcfg
+     - const: rchanrt
+     - const: tchanrt
+
+  msi-parent: true
+
+  ti,sci:
+    description: phandle to TI-SCI compatible System controller node
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,sci-dev-id:
+    description: TI-SCI device id of UDMAP
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,ringacc:
+    description: phandle to the ring accelerator node
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,sci-rm-range-tchan:
+    description: |
+      Array of UDMA tchan resource subtypes for resource allocation for this
+      host
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+
+  ti,sci-rm-range-rchan:
+    description: |
+      Array of UDMA rchan resource subtypes for resource allocation for this
+      host
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+
+  ti,sci-rm-range-rflow:
+    description: |
+      Array of UDMA rflow resource subtypes for resource allocation for this
+      host
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+
+required:
+  - compatible
+  - "#dma-cells"
+  - reg
+  - reg-names
+  - msi-parent
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,ringacc
+  - ti,sci-rm-range-tchan
+  - ti,sci-rm-range-rchan
+  - ti,sci-rm-range-rflow
+
+examples:
+  - |+
+    cbass_main {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cbass_main_navss: navss@30800000 {
+            compatible = "simple-mfd";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            dma-coherent;
+            dma-ranges;
+            ranges = <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>;
+
+            ti,sci-dev-id = <118>;
+
+            main_udmap: dma-controller@31150000 {
+                compatible = "ti,am654-navss-main-udmap";
+                reg = <0x0 0x31150000 0x0 0x100>,
+                      <0x0 0x34000000 0x0 0x100000>,
+                      <0x0 0x35000000 0x0 0x100000>;
+                reg-names = "gcfg", "rchanrt", "tchanrt";
+                #dma-cells = <1>;
+
+                ti,ringacc = <&ringacc>;
+
+                msi-parent = <&inta_main_udmass>;
+
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <188>;
+
+                ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+                                        <0x2>; /* TX_CHAN */
+                ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
+                                        <0x5>; /* RX_CHAN */
+                ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
+            };
+        };
+
+        mcasp0: mcasp@02B00000 {
+            dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+            dma-names = "tx", "rx";
+        };
+
+        crypto: crypto@4E00000 {
+            compatible = "ti,sa2ul-crypto";
+
+            dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
+            dma-names = "tx", "rx1", "rx2";
+        };
+    };
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


  parent reply	other threads:[~2019-11-11 13:53 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-11 13:53 [PATCH v5 00/15] dmaengine/soc: Add Texas Instruments UDMA support Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 01/15] bindings: soc: ti: add documentation for k3 ringacc Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 02/15] soc: ti: k3: add navss ringacc driver Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 03/15] dmaengine: doc: Add sections for per descriptor metadata support Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 04/15] dmaengine: Add metadata_ops for dma_async_tx_descriptor Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 05/15] dmaengine: Add support for reporting DMA cached data amount Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 06/15] dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 07/15] dmaengine: ti: k3 PSI-L remote endpoint configuration Peter Ujfalusi
2019-11-11 13:53 ` Peter Ujfalusi [this message]
2019-11-12 19:27   ` [PATCH v5 08/15] dt-bindings: dma: ti: Add document for K3 UDMA Rob Herring
2019-11-11 13:53 ` [PATCH v5 09/15] dmaengine: ti: New driver for K3 UDMA - split#1: defines, structs, io func Peter Ujfalusi
2019-11-11 15:25   ` Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 10/15] dmaengine: ti: New driver for K3 UDMA - split#2: probe/remove, xlate and filter_fn Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 11/15] dmaengine: ti: New driver for K3 UDMA - split#3: alloc/free chan_resources Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 12/15] dmaengine: ti: New driver for K3 UDMA - split#4: dma_device callbacks 1 Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 13/15] dmaengine: ti: New driver for K3 UDMA - split#5: dma_device callbacks 2 Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 14/15] dmaengine: ti: New driver for K3 UDMA - split#6: Kconfig and Makefile Peter Ujfalusi
2019-11-11 13:53 ` [PATCH v5 15/15] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users Peter Ujfalusi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191111135330.8235-9-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=grygorii.strashko@ti.com \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).