From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Andrew F . Davis" <afd@ti.com>, Dave Gerlach <d-gerlach@ti.com>,
Faiz Abbas <faiz_abbas@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Keerthy <j-keerthy@ti.com>, Nishanth Menon <nm@ti.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Roger Quadros <rogerq@ti.com>, Suman Anna <s-anna@ti.com>,
Tero Kristo <t-kristo@ti.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] bus: ti-sysc: Add module enable quirk for audio AESS
Date: Wed, 13 Nov 2019 09:37:02 -0800 [thread overview]
Message-ID: <20191113173702.57107-1-tony@atomide.com> (raw)
We must set the autogating bit on enable for AESS (Audio Engine SubSystem)
when probed with ti-sysc interconnect target module driver. Otherwise it
won't idle properly.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/bus/ti-sysc.c | 14 +++++++++++++-
include/linux/platform_data/ti-sysc.h | 1 +
2 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1248,6 +1248,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK_SWSUP_SIDLE),
/* Quirks that need to be set based on detected module */
+ SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff,
+ SYSC_MODULE_QUIRK_AESS),
SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
SYSC_MODULE_QUIRK_HDQ1W),
SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff,
@@ -1276,7 +1278,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
#ifdef DEBUG
SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0),
SYSC_QUIRK("atl", 0, 0, -1, -1, 0x0a070100, 0xffffffff, 0),
- SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff, 0),
SYSC_QUIRK("cm", 0, 0, -1, -1, 0x40000301, 0xffffffff, 0),
SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902,
@@ -1408,6 +1409,14 @@ static void sysc_clk_enable_quirk_hdq1w(struct sysc *ddata)
sysc_write(ddata, offset, val);
}
+/* AESS (Audio Engine SubSystem) needs autogating set after enable */
+static void sysc_module_enable_quirk_aess(struct sysc *ddata)
+{
+ int offset = 0x7c; /* AESS_AUTO_GATING_ENABLE */
+
+ sysc_write(ddata, offset, 1);
+}
+
/* I2C needs extra enable bit toggling for reset */
static void sysc_clk_quirk_i2c(struct sysc *ddata, bool enable)
{
@@ -1490,6 +1499,9 @@ static void sysc_init_module_quirks(struct sysc *ddata)
return;
}
+ if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_AESS)
+ ddata->module_enable_quirk = sysc_module_enable_quirk_aess;
+
if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_SGX)
ddata->module_enable_quirk = sysc_module_enable_quirk_sgx;
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -49,6 +49,7 @@ struct sysc_regbits {
s8 emufree_shift;
};
+#define SYSC_MODULE_QUIRK_AESS BIT(19)
#define SYSC_MODULE_QUIRK_SGX BIT(18)
#define SYSC_MODULE_QUIRK_HDQ1W BIT(17)
#define SYSC_MODULE_QUIRK_I2C BIT(16)
--
2.23.0
next reply other threads:[~2019-11-13 17:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-13 17:37 Tony Lindgren [this message]
2019-11-14 10:25 ` [PATCH] bus: ti-sysc: Add module enable quirk for audio AESS Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191113173702.57107-1-tony@atomide.com \
--to=tony@atomide.com \
--cc=afd@ti.com \
--cc=d-gerlach@ti.com \
--cc=faiz_abbas@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=rogerq@ti.com \
--cc=s-anna@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).