linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 1/2] dt-bindings: power: Convert Generic Power Domain bindings to json-schema
@ 2019-10-30 17:32 Krzysztof Kozlowski
  2019-10-30 17:32 ` [PATCH v3 2/2] dt-bindings: power: Convert Samsung Exynos " Krzysztof Kozlowski
  2019-11-05 19:42 ` [PATCH v3 1/2] dt-bindings: power: Convert Generic " Rob Herring
  0 siblings, 2 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2019-10-30 17:32 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Kevin Hilman, Rafael J. Wysocki,
	linux-arm-kernel, devicetree, linux-kernel, linux-clk,
	linux-samsung-soc
  Cc: Krzysztof Kozlowski

Convert Generic Power Domain bindings to DT schema format using
json-schema.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>

---

Changes since v2:
1. Keep description of consumers in power-domain.txt,
2. Rename power_domain.txt to power-domain.txt,
3. Indent example with four spaces (more readable).

Changes since v1:
1. Select all nodes for consumers,
2. Remove from consumers duplicated properties with dt-schema,
3. Fix power domain pattern,
4. Remove unneeded types.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../devicetree/bindings/arm/arm,scmi.txt      |   2 +-
 .../devicetree/bindings/arm/arm,scpi.txt      |   2 +-
 .../bindings/arm/freescale/fsl,scu.txt        |   2 +-
 .../bindings/clock/renesas,cpg-mssr.txt       |   2 +-
 .../bindings/clock/ti/davinci/psc.txt         |   2 +-
 .../firmware/nvidia,tegra186-bpmp.txt         |   2 +-
 .../bindings/power/amlogic,meson-gx-pwrc.txt  |   2 +-
 .../devicetree/bindings/power/fsl,imx-gpc.txt |   2 +-
 .../bindings/power/fsl,imx-gpcv2.txt          |   2 +-
 .../{power_domain.txt => power-domain.txt}    |  95 +------------
 .../bindings/power/power-domain.yaml          | 133 ++++++++++++++++++
 .../bindings/power/renesas,sysc-rmobile.txt   |   2 +-
 .../bindings/power/xlnx,zynqmp-genpd.txt      |   2 +-
 .../bindings/soc/bcm/brcm,bcm2835-pm.txt      |   2 +-
 .../bindings/soc/mediatek/scpsys.txt          |   2 +-
 .../bindings/soc/ti/sci-pm-domain.txt         |   2 +-
 MAINTAINERS                                   |   2 +-
 17 files changed, 149 insertions(+), 109 deletions(-)
 rename Documentation/devicetree/bindings/power/{power_domain.txt => power-domain.txt} (51%)
 create mode 100644 Documentation/devicetree/bindings/power/power-domain.yaml

diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt
index 083dbf96ee00..f493d69e6194 100644
--- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt
@@ -100,7 +100,7 @@ Required sub-node properties:
 
 [0] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/index.html
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/power/power_domain.txt
+[2] Documentation/devicetree/bindings/power/power-domain.yaml
 [3] Documentation/devicetree/bindings/thermal/thermal.txt
 [4] Documentation/devicetree/bindings/sram/sram.txt
 [5] Documentation/devicetree/bindings/reset/reset.txt
diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt
index 401831973638..7b83ef43b418 100644
--- a/Documentation/devicetree/bindings/arm/arm,scpi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt
@@ -110,7 +110,7 @@ Required properties:
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/thermal/thermal.txt
 [3] Documentation/devicetree/bindings/sram/sram.txt
-[4] Documentation/devicetree/bindings/power/power_domain.txt
+[4] Documentation/devicetree/bindings/power/power-domain.yaml
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 70c1a624486d..e07735a8c2c7 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -124,7 +124,7 @@ Required properties for Pinctrl sub nodes:
 			CONFIG settings.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/power/power_domain.txt
+[2] Documentation/devicetree/bindings/power/power-domain.yaml
 [3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
 
 RTC bindings based on SCU Message Protocol
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
index 916a601b76a7..2def42096886 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -59,7 +59,7 @@ Required Properties:
 	power-managed through Module Standby should refer to the CPG device
 	node in their "power-domains" property, as documented by the generic PM
 	Domain bindings in
-	Documentation/devicetree/bindings/power/power_domain.txt.
+	Documentation/devicetree/bindings/power/power-domain.yaml.
 
   - #reset-cells: Must be 1
       - The single reset specifier cell must be the module number, as defined
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt
index dae4ad8e198c..5f746ebf7a2c 100644
--- a/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt
@@ -67,5 +67,5 @@ Examples:
 
 Also see:
 - Documentation/devicetree/bindings/clock/clock-bindings.txt
-- Documentation/devicetree/bindings/power/power_domain.txt
+- Documentation/devicetree/bindings/power/power-domain.yaml
 - Documentation/devicetree/bindings/reset/reset.txt
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
index ff380dadb5f9..e44a13bc06ed 100644
--- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
@@ -32,7 +32,7 @@ implemented by this node:
 
 - .../clock/clock-bindings.txt
 - <dt-bindings/clock/tegra186-clock.h>
-- ../power/power_domain.txt
+- ../power/power-domain.yaml
 - <dt-bindings/power/tegra186-powergate.h>
 - .../reset/reset.txt
 - <dt-bindings/reset/tegra186-reset.h>
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
index 0fdc3dd1125e..99b5b10cda31 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
@@ -10,7 +10,7 @@ The Video Processing Unit power domain is controlled by this power controller,
 but the domain requires some external resources to meet the correct power
 sequences.
 The bindings must respect the power domain bindings as described in the file
-power_domain.txt
+power-domain.yaml
 
 Device Tree Bindings:
 ---------------------
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
index 726ec2875223..f0f5553a9e74 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
@@ -19,7 +19,7 @@ Required properties:
   - ipg
 
 The power domains are generic power domain providers as documented in
-Documentation/devicetree/bindings/power/power_domain.txt. They are described as
+Documentation/devicetree/bindings/power/power-domain.yaml. They are described as
 subnodes of the power gating controller 'pgc' node of the GPC and should
 contain the following:
 
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
index 7c7e972aaa42..61649202f6f5 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
@@ -17,7 +17,7 @@ Required properties:
 
 Power domains contained within GPC node are generic power domain
 providers, documented in
-Documentation/devicetree/bindings/power/power_domain.txt, which are
+Documentation/devicetree/bindings/power/power-domain.yaml, which are
 described as subnodes of the power gating controller 'pgc' node,
 which, in turn, is expected to contain the following:
 
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power-domain.txt
similarity index 51%
rename from Documentation/devicetree/bindings/power/power_domain.txt
rename to Documentation/devicetree/bindings/power/power-domain.txt
index 8f8b25a24b8f..5b09b2deb483 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power-domain.txt
@@ -13,100 +13,7 @@ phandle arguments (so called PM domain specifiers) of length specified by the
 
 ==PM domain providers==
 
-Required properties:
- - #power-domain-cells : Number of cells in a PM domain specifier;
-   Typically 0 for nodes representing a single PM domain and 1 for nodes
-   providing multiple PM domains (e.g. power controllers), but can be any value
-   as specified by device tree binding documentation of particular provider.
-
-Optional properties:
- - power-domains : A phandle and PM domain specifier as defined by bindings of
-                   the power controller specified by phandle.
-   Some power domains might be powered from another power domain (or have
-   other hardware specific dependencies). For representing such dependency
-   a standard PM domain consumer binding is used. When provided, all domains
-   created by the given provider should be subdomains of the domain
-   specified by this binding. More details about power domain specifier are
-   available in the next section.
-
-- domain-idle-states : A phandle of an idle-state that shall be soaked into a
-                generic domain power state. The idle state definitions are
-                compatible with domain-idle-state specified in [1]. phandles
-                that are not compatible with domain-idle-state will be
-                ignored.
-  The domain-idle-state property reflects the idle state of this PM domain and
-  not the idle states of the devices or sub-domains in the PM domain. Devices
-  and sub-domains have their own idle-states independent of the parent
-  domain's idle states. In the absence of this property, the domain would be
-  considered as capable of being powered-on or powered-off.
-
-- operating-points-v2 : Phandles to the OPP tables of power domains provided by
-  a power domain provider. If the provider provides a single power domain only
-  or all the power domains provided by the provider have identical OPP tables,
-  then this shall contain a single phandle. Refer to ../opp/opp.txt for more
-  information.
-
-Example:
-
-	power: power-controller@12340000 {
-		compatible = "foo,power-controller";
-		reg = <0x12340000 0x1000>;
-		#power-domain-cells = <1>;
-	};
-
-The node above defines a power controller that is a PM domain provider and
-expects one cell as its phandle argument.
-
-Example 2:
-
-	parent: power-controller@12340000 {
-		compatible = "foo,power-controller";
-		reg = <0x12340000 0x1000>;
-		#power-domain-cells = <1>;
-	};
-
-	child: power-controller@12341000 {
-		compatible = "foo,power-controller";
-		reg = <0x12341000 0x1000>;
-		power-domains = <&parent 0>;
-		#power-domain-cells = <1>;
-	};
-
-The nodes above define two power controllers: 'parent' and 'child'.
-Domains created by the 'child' power controller are subdomains of '0' power
-domain provided by the 'parent' power controller.
-
-Example 3:
-	parent: power-controller@12340000 {
-		compatible = "foo,power-controller";
-		reg = <0x12340000 0x1000>;
-		#power-domain-cells = <0>;
-		domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>;
-	};
-
-	child: power-controller@12341000 {
-		compatible = "foo,power-controller";
-		reg = <0x12341000 0x1000>;
-		power-domains = <&parent>;
-		#power-domain-cells = <0>;
-		domain-idle-states = <&DOMAIN_PWR_DN>;
-	};
-
-	DOMAIN_RET: state@0 {
-		compatible = "domain-idle-state";
-		reg = <0x0>;
-		entry-latency-us = <1000>;
-		exit-latency-us = <2000>;
-		min-residency-us = <10000>;
-	};
-
-	DOMAIN_PWR_DN: state@1 {
-		compatible = "domain-idle-state";
-		reg = <0x1>;
-		entry-latency-us = <5000>;
-		exit-latency-us = <8000>;
-		min-residency-us = <7000>;
-	};
+See power-domain.yaml.
 
 ==PM domain consumers==
 
diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
new file mode 100644
index 000000000000..455b573293ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/power-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PM domains
+
+maintainers:
+  - Rafael J. Wysocki <rjw@rjwysocki.net>
+  - Kevin Hilman <khilman@kernel.org>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description: |+
+  System on chip designs are often divided into multiple PM domains that can be
+  used for power gating of selected IP blocks for power saving by reduced leakage
+  current.
+
+  This device tree binding can be used to bind PM domain consumer devices with
+  their PM domains provided by PM domain providers. A PM domain provider can be
+  represented by any node in the device tree and can provide one or more PM
+  domains. A consumer node can refer to the provider by a phandle and a set of
+  phandle arguments (so called PM domain specifiers) of length specified by the
+  \#power-domain-cells property in the PM domain provider node.
+
+properties:
+  $nodename:
+    pattern: "^(power-controller|power-domain)(@.*)?$"
+
+  domain-idle-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      A phandle of an idle-state that shall be soaked into a generic domain
+      power state. The idle state definitions are compatible with
+      domain-idle-state specified in
+      Documentation/devicetree/bindings/power/domain-idle-state.txt
+      phandles that are not compatible with domain-idle-state will be ignored.
+      The domain-idle-state property reflects the idle state of this PM domain
+      and not the idle states of the devices or sub-domains in the PM domain.
+      Devices and sub-domains have their own idle-states independent
+      of the parent domain's idle states. In the absence of this property,
+      the domain would be considered as capable of being powered-on
+      or powered-off.
+
+  operating-points-v2:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandles to the OPP tables of power domains provided by a power domain
+      provider. If the provider provides a single power domain only or all
+      the power domains provided by the provider have identical OPP tables,
+      then this shall contain a single phandle. Refer to ../opp/opp.txt
+      for more information.
+
+  "#power-domain-cells":
+    description:
+      Number of cells in a PM domain specifier. Typically 0 for nodes
+      representing a single PM domain and 1 for nodes providing multiple PM
+      domains (e.g. power controllers), but can be any value as specified
+      by device tree binding documentation of particular provider.
+
+  power-domains:
+    description:
+       A phandle and PM domain specifier as defined by bindings of the power
+       controller specified by phandle. Some power domains might be powered
+       from another power domain (or have other hardware specific
+       dependencies). For representing such dependency a standard PM domain
+       consumer binding is used. When provided, all domains created
+       by the given provider should be subdomains of the domain specified
+       by this binding.
+
+required:
+  - "#power-domain-cells"
+
+examples:
+  - |
+    power: power-controller@12340000 {
+        compatible = "foo,power-controller";
+        reg = <0x12340000 0x1000>;
+        #power-domain-cells = <1>;
+    };
+
+    // The node above defines a power controller that is a PM domain provider and
+    // expects one cell as its phandle argument.
+
+  - |
+    parent2: power-controller@12340000 {
+        compatible = "foo,power-controller";
+        reg = <0x12340000 0x1000>;
+        #power-domain-cells = <1>;
+    };
+
+    child2: power-controller@12341000 {
+        compatible = "foo,power-controller";
+        reg = <0x12341000 0x1000>;
+        power-domains = <&parent2 0>;
+        #power-domain-cells = <1>;
+    };
+
+    // The nodes above define two power controllers: 'parent' and 'child'.
+    // Domains created by the 'child' power controller are subdomains of '0' power
+    // domain provided by the 'parent' power controller.
+
+  - |
+    parent3: power-controller@12340000 {
+        compatible = "foo,power-controller";
+        reg = <0x12340000 0x1000>;
+        #power-domain-cells = <0>;
+        domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>;
+    };
+
+    child3: power-controller@12341000 {
+        compatible = "foo,power-controller";
+        reg = <0x12341000 0x1000>;
+        power-domains = <&parent3>;
+        #power-domain-cells = <0>;
+        domain-idle-states = <&DOMAIN_PWR_DN>;
+    };
+
+    DOMAIN_RET: state@0 {
+        compatible = "domain-idle-state";
+        reg = <0x0 0x0>;
+        entry-latency-us = <1000>;
+        exit-latency-us = <2000>;
+        min-residency-us = <10000>;
+    };
+
+    DOMAIN_PWR_DN: state@1 {
+        compatible = "domain-idle-state";
+        reg = <0x1 0x0>;
+        entry-latency-us = <5000>;
+        exit-latency-us = <8000>;
+        min-residency-us = <7000>;
+    };
diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
index beda7d2efc30..49aba15dff8b 100644
--- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
+++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
@@ -29,7 +29,7 @@ Optional nodes:
 
 Each of the PM domain nodes represents a PM domain, as documented by the
 generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.yaml.
 
 The nodes should be named by the real power area names, and thus their names
 should be unique.
diff --git a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
index 8d1b8200ebd0..54b9f9d0f90f 100644
--- a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
+++ b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
@@ -4,7 +4,7 @@ Device Tree Bindings for the Xilinx Zynq MPSoC PM domains
 The binding for zynqmp-power-controller follow the common
 generic PM domain binding[1].
 
-[1] Documentation/devicetree/bindings/power/power_domain.txt
+[1] Documentation/devicetree/bindings/power/power-domain.yaml
 
 == Zynq MPSoC Generic PM Domain Node ==
 
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
index 3b7d32956391..72ff033565e5 100644
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
@@ -26,7 +26,7 @@ Optional properties:
     system power.  This node follows the power controller bindings[3].
 
 [1] Documentation/devicetree/bindings/reset/reset.txt
-[2] Documentation/devicetree/bindings/power/power_domain.txt
+[2] Documentation/devicetree/bindings/power/power-domain.yaml
 [3] Documentation/devicetree/bindings/power/power-controller.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
index 876693a7ada5..8f469d85833b 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -8,7 +8,7 @@ The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power
 domain control.
 
 The driver implements the Generic PM domain bindings described in
-power/power_domain.txt. It provides the power domains defined in
+power/power-domain.yaml. It provides the power domains defined in
 - include/dt-bindings/power/mt8173-power.h
 - include/dt-bindings/power/mt6797-power.h
 - include/dt-bindings/power/mt2701-power.h
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
index f541d1f776a2..6217e64309de 100644
--- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
@@ -12,7 +12,7 @@ PM Domain Node
 ==============
 The PM domain node represents the global PM domain managed by the PMMC, which
 in this case is the implementation as documented by the generic PM domain
-bindings in Documentation/devicetree/bindings/power/power_domain.txt.  Because
+bindings in Documentation/devicetree/bindings/power/power-domain.yaml.  Because
 this relies on the TI SCI protocol to communicate with the PMMC it must be a
 child of the pmmc node.
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 9f69d01da3a6..8fde5aa64bda 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6953,7 +6953,7 @@ L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	drivers/base/power/domain*.c
 F:	include/linux/pm_domain.h
-F:	Documentation/devicetree/bindings/power/power_domain.txt
+F:	Documentation/devicetree/bindings/power/power-domain*
 
 GENERIC RESISTIVE TOUCHSCREEN ADC DRIVER
 M:	Eugen Hristev <eugen.hristev@microchip.com>
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v3 2/2] dt-bindings: power: Convert Samsung Exynos Power Domain bindings to json-schema
  2019-10-30 17:32 [PATCH v3 1/2] dt-bindings: power: Convert Generic Power Domain bindings to json-schema Krzysztof Kozlowski
@ 2019-10-30 17:32 ` Krzysztof Kozlowski
  2019-11-05 19:43   ` Rob Herring
  2019-11-05 19:42 ` [PATCH v3 1/2] dt-bindings: power: Convert Generic " Rob Herring
  1 sibling, 1 reply; 8+ messages in thread
From: Krzysztof Kozlowski @ 2019-10-30 17:32 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Kevin Hilman, Rafael J. Wysocki,
	linux-arm-kernel, devicetree, linux-kernel, linux-clk,
	linux-samsung-soc
  Cc: Krzysztof Kozlowski

Convert Samsung Exynos Soc Power Domain bindings to DT schema format using
json-schema.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v2:
1. Use new name of file in samsung,sysmmu.yaml and MAINTAINERS.

Changes since v1:
1. Indent example with four spaces (more readable),
2. Remove unneeded types,
3. Add missing address in example and fix the name.
---
 .../bindings/iommu/samsung,sysmmu.yaml        |  2 +-
 .../devicetree/bindings/power/pd-samsung.txt  | 45 -------------
 .../devicetree/bindings/power/pd-samsung.yaml | 66 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 4 files changed, 68 insertions(+), 47 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/power/pd-samsung.txt
 create mode 100644 Documentation/devicetree/bindings/power/pd-samsung.yaml

diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
index ecde98da5b72..7cdd3aaa2ba4 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -69,7 +69,7 @@ properties:
     description: |
       Required if the System MMU is needed to gate its power.
       Please refer to the following document:
-      Documentation/devicetree/bindings/power/pd-samsung.txt
+      Documentation/devicetree/bindings/power/pd-samsung.yaml
     maxItems: 1
 
 required:
diff --git a/Documentation/devicetree/bindings/power/pd-samsung.txt b/Documentation/devicetree/bindings/power/pd-samsung.txt
deleted file mode 100644
index 92ef355e8f64..000000000000
--- a/Documentation/devicetree/bindings/power/pd-samsung.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Samsung Exynos Power Domains
-
-Exynos processors include support for multiple power domains which are used
-to gate power to one or more peripherals on the processor.
-
-Required Properties:
-- compatible: should be one of the following.
-    * samsung,exynos4210-pd - for exynos4210 type power domain.
-    * samsung,exynos5433-pd - for exynos5433 type power domain.
-- reg: physical base address of the controller and length of memory mapped
-    region.
-- #power-domain-cells: number of cells in power domain specifier;
-    must be 0.
-
-Optional Properties:
-- label: Human readable string with domain name. Will be visible in userspace
-	to let user to distinguish between multiple domains in SoC.
-- power-domains: phandle pointing to the parent power domain, for more details
-		 see Documentation/devicetree/bindings/power/power_domain.txt
-
-Deprecated Properties:
-- clocks
-- clock-names
-
-Node of a device using power domains must have a power-domains property
-defined with a phandle to respective power domain.
-
-Example:
-
-	lcd0: power-domain-lcd0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C00 0x10>;
-		#power-domain-cells = <0>;
-		label = "LCD0";
-	};
-
-	mfc_pd: power-domain@10044060 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044060 0x20>;
-		#power-domain-cells = <0>;
-		label = "MFC";
-	};
-
-See Documentation/devicetree/bindings/power/power_domain.txt for description
-of consumer-side bindings.
diff --git a/Documentation/devicetree/bindings/power/pd-samsung.yaml b/Documentation/devicetree/bindings/power/pd-samsung.yaml
new file mode 100644
index 000000000000..09bdd96c1ec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/pd-samsung.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/pd-samsung.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Power Domains
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  Exynos processors include support for multiple power domains which are used
+  to gate power to one or more peripherals on the processor.
+
+allOf:
+  - $ref: power-domain.yaml#
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-pd
+      - samsung,exynos5433-pd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    deprecated: true
+    maxItems: 1
+
+  clock-names:
+    deprecated: true
+    maxItems: 1
+
+  label:
+    description:
+      Human readable string with domain name. Will be visible in userspace
+      to let user to distinguish between multiple domains in SoC.
+
+  "#power-domain-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#power-domain-cells"
+  - reg
+
+examples:
+  - |
+    lcd0_pd: power-domain@10023c80 {
+        compatible = "samsung,exynos4210-pd";
+        reg = <0x10023c80 0x20>;
+        #power-domain-cells = <0>;
+        label = "LCD0";
+    };
+
+    mfc_pd: power-domain@10044060 {
+        compatible = "samsung,exynos4210-pd";
+        reg = <0x10044060 0x20>;
+        #power-domain-cells = <0>;
+        label = "MFC";
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 8fde5aa64bda..7126d3e079a4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2258,7 +2258,7 @@ F:	drivers/soc/samsung/
 F:	include/linux/soc/samsung/
 F:	Documentation/arm/samsung/
 F:	Documentation/devicetree/bindings/arm/samsung/
-F:	Documentation/devicetree/bindings/power/pd-samsung.txt
+F:	Documentation/devicetree/bindings/power/pd-samsung.yaml
 N:	exynos
 
 ARM/SAMSUNG MOBILE MACHINE SUPPORT
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 1/2] dt-bindings: power: Convert Generic Power Domain bindings to json-schema
  2019-10-30 17:32 [PATCH v3 1/2] dt-bindings: power: Convert Generic Power Domain bindings to json-schema Krzysztof Kozlowski
  2019-10-30 17:32 ` [PATCH v3 2/2] dt-bindings: power: Convert Samsung Exynos " Krzysztof Kozlowski
@ 2019-11-05 19:42 ` Rob Herring
  2019-11-14 12:59   ` Krzysztof Kozlowski
  1 sibling, 1 reply; 8+ messages in thread
From: Rob Herring @ 2019-11-05 19:42 UTC (permalink / raw)
  To: Krzysztof Kozlowski
  Cc: Mark Rutland, Kevin Hilman, Rafael J. Wysocki, linux-arm-kernel,
	devicetree, linux-kernel, linux-clk, linux-samsung-soc,
	Krzysztof Kozlowski

On Wed, 30 Oct 2019 18:32:15 +0100, Krzysztof Kozlowski wrote:
> Convert Generic Power Domain bindings to DT schema format using
> json-schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
> Acked-by: Stephen Boyd <sboyd@kernel.org>
> 
> ---
> 
> Changes since v2:
> 1. Keep description of consumers in power-domain.txt,
> 2. Rename power_domain.txt to power-domain.txt,
> 3. Indent example with four spaces (more readable).
> 
> Changes since v1:
> 1. Select all nodes for consumers,
> 2. Remove from consumers duplicated properties with dt-schema,
> 3. Fix power domain pattern,
> 4. Remove unneeded types.
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  .../devicetree/bindings/arm/arm,scmi.txt      |   2 +-
>  .../devicetree/bindings/arm/arm,scpi.txt      |   2 +-
>  .../bindings/arm/freescale/fsl,scu.txt        |   2 +-
>  .../bindings/clock/renesas,cpg-mssr.txt       |   2 +-
>  .../bindings/clock/ti/davinci/psc.txt         |   2 +-
>  .../firmware/nvidia,tegra186-bpmp.txt         |   2 +-
>  .../bindings/power/amlogic,meson-gx-pwrc.txt  |   2 +-
>  .../devicetree/bindings/power/fsl,imx-gpc.txt |   2 +-
>  .../bindings/power/fsl,imx-gpcv2.txt          |   2 +-
>  .../{power_domain.txt => power-domain.txt}    |  95 +------------
>  .../bindings/power/power-domain.yaml          | 133 ++++++++++++++++++
>  .../bindings/power/renesas,sysc-rmobile.txt   |   2 +-
>  .../bindings/power/xlnx,zynqmp-genpd.txt      |   2 +-
>  .../bindings/soc/bcm/brcm,bcm2835-pm.txt      |   2 +-
>  .../bindings/soc/mediatek/scpsys.txt          |   2 +-
>  .../bindings/soc/ti/sci-pm-domain.txt         |   2 +-
>  MAINTAINERS                                   |   2 +-
>  17 files changed, 149 insertions(+), 109 deletions(-)
>  rename Documentation/devicetree/bindings/power/{power_domain.txt => power-domain.txt} (51%)
>  create mode 100644 Documentation/devicetree/bindings/power/power-domain.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 2/2] dt-bindings: power: Convert Samsung Exynos Power Domain bindings to json-schema
  2019-10-30 17:32 ` [PATCH v3 2/2] dt-bindings: power: Convert Samsung Exynos " Krzysztof Kozlowski
@ 2019-11-05 19:43   ` Rob Herring
  0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2019-11-05 19:43 UTC (permalink / raw)
  To: Krzysztof Kozlowski
  Cc: Mark Rutland, Kevin Hilman, Rafael J. Wysocki, linux-arm-kernel,
	devicetree, linux-kernel, linux-clk, linux-samsung-soc,
	Krzysztof Kozlowski

On Wed, 30 Oct 2019 18:32:16 +0100, Krzysztof Kozlowski wrote:
> Convert Samsung Exynos Soc Power Domain bindings to DT schema format using
> json-schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
> ---
> 
> Changes since v2:
> 1. Use new name of file in samsung,sysmmu.yaml and MAINTAINERS.
> 
> Changes since v1:
> 1. Indent example with four spaces (more readable),
> 2. Remove unneeded types,
> 3. Add missing address in example and fix the name.
> ---
>  .../bindings/iommu/samsung,sysmmu.yaml        |  2 +-
>  .../devicetree/bindings/power/pd-samsung.txt  | 45 -------------
>  .../devicetree/bindings/power/pd-samsung.yaml | 66 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  4 files changed, 68 insertions(+), 47 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/power/pd-samsung.txt
>  create mode 100644 Documentation/devicetree/bindings/power/pd-samsung.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 1/2] dt-bindings: power: Convert Generic Power Domain bindings to json-schema
  2019-11-05 19:42 ` [PATCH v3 1/2] dt-bindings: power: Convert Generic " Rob Herring
@ 2019-11-14 12:59   ` Krzysztof Kozlowski
  2019-11-14 16:41     ` Rob Herring
  0 siblings, 1 reply; 8+ messages in thread
From: Krzysztof Kozlowski @ 2019-11-14 12:59 UTC (permalink / raw)
  To: Rob Herring
  Cc: Mark Rutland, Kevin Hilman, Rafael J. Wysocki, linux-arm-kernel,
	devicetree, linux-kernel, linux-clk, linux-samsung-soc

On Tue, Nov 05, 2019 at 01:42:58PM -0600, Rob Herring wrote:
> On Wed, 30 Oct 2019 18:32:15 +0100, Krzysztof Kozlowski wrote:
> > Convert Generic Power Domain bindings to DT schema format using
> > json-schema.
> > 
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
> > Acked-by: Stephen Boyd <sboyd@kernel.org>
> > 
> > ---
> > 
> > Changes since v2:
> > 1. Keep description of consumers in power-domain.txt,
> > 2. Rename power_domain.txt to power-domain.txt,
> > 3. Indent example with four spaces (more readable).
> > 
> > Changes since v1:
> > 1. Select all nodes for consumers,
> > 2. Remove from consumers duplicated properties with dt-schema,
> > 3. Fix power domain pattern,
> > 4. Remove unneeded types.
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> >  .../devicetree/bindings/arm/arm,scmi.txt      |   2 +-
> >  .../devicetree/bindings/arm/arm,scpi.txt      |   2 +-
> >  .../bindings/arm/freescale/fsl,scu.txt        |   2 +-
> >  .../bindings/clock/renesas,cpg-mssr.txt       |   2 +-
> >  .../bindings/clock/ti/davinci/psc.txt         |   2 +-
> >  .../firmware/nvidia,tegra186-bpmp.txt         |   2 +-
> >  .../bindings/power/amlogic,meson-gx-pwrc.txt  |   2 +-
> >  .../devicetree/bindings/power/fsl,imx-gpc.txt |   2 +-
> >  .../bindings/power/fsl,imx-gpcv2.txt          |   2 +-
> >  .../{power_domain.txt => power-domain.txt}    |  95 +------------
> >  .../bindings/power/power-domain.yaml          | 133 ++++++++++++++++++
> >  .../bindings/power/renesas,sysc-rmobile.txt   |   2 +-
> >  .../bindings/power/xlnx,zynqmp-genpd.txt      |   2 +-
> >  .../bindings/soc/bcm/brcm,bcm2835-pm.txt      |   2 +-
> >  .../bindings/soc/mediatek/scpsys.txt          |   2 +-
> >  .../bindings/soc/ti/sci-pm-domain.txt         |   2 +-
> >  MAINTAINERS                                   |   2 +-
> >  17 files changed, 149 insertions(+), 109 deletions(-)
> >  rename Documentation/devicetree/bindings/power/{power_domain.txt => power-domain.txt} (51%)
> >  create mode 100644 Documentation/devicetree/bindings/power/power-domain.yaml
> > 
> 
> Reviewed-by: Rob Herring <robh@kernel.org>

The patches should apply cleanly in top of your tree so maybe you can
pick them up?

Best regards,
Krzysztof


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 1/2] dt-bindings: power: Convert Generic Power Domain bindings to json-schema
  2019-11-14 12:59   ` Krzysztof Kozlowski
@ 2019-11-14 16:41     ` Rob Herring
  2019-11-19  9:58       ` Geert Uytterhoeven
  0 siblings, 1 reply; 8+ messages in thread
From: Rob Herring @ 2019-11-14 16:41 UTC (permalink / raw)
  To: Krzysztof Kozlowski
  Cc: Mark Rutland, Kevin Hilman, Rafael J. Wysocki,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	devicetree, linux-kernel, linux-clk, linux-samsung-soc

On Thu, Nov 14, 2019 at 6:59 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On Tue, Nov 05, 2019 at 01:42:58PM -0600, Rob Herring wrote:
> > On Wed, 30 Oct 2019 18:32:15 +0100, Krzysztof Kozlowski wrote:
> > > Convert Generic Power Domain bindings to DT schema format using
> > > json-schema.
> > >
> > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
> > > Acked-by: Stephen Boyd <sboyd@kernel.org>
> > >
> > > ---
> > >
> > > Changes since v2:
> > > 1. Keep description of consumers in power-domain.txt,
> > > 2. Rename power_domain.txt to power-domain.txt,
> > > 3. Indent example with four spaces (more readable).
> > >
> > > Changes since v1:
> > > 1. Select all nodes for consumers,
> > > 2. Remove from consumers duplicated properties with dt-schema,
> > > 3. Fix power domain pattern,
> > > 4. Remove unneeded types.
> > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > ---
> > >  .../devicetree/bindings/arm/arm,scmi.txt      |   2 +-
> > >  .../devicetree/bindings/arm/arm,scpi.txt      |   2 +-
> > >  .../bindings/arm/freescale/fsl,scu.txt        |   2 +-
> > >  .../bindings/clock/renesas,cpg-mssr.txt       |   2 +-
> > >  .../bindings/clock/ti/davinci/psc.txt         |   2 +-
> > >  .../firmware/nvidia,tegra186-bpmp.txt         |   2 +-
> > >  .../bindings/power/amlogic,meson-gx-pwrc.txt  |   2 +-
> > >  .../devicetree/bindings/power/fsl,imx-gpc.txt |   2 +-
> > >  .../bindings/power/fsl,imx-gpcv2.txt          |   2 +-
> > >  .../{power_domain.txt => power-domain.txt}    |  95 +------------
> > >  .../bindings/power/power-domain.yaml          | 133 ++++++++++++++++++
> > >  .../bindings/power/renesas,sysc-rmobile.txt   |   2 +-
> > >  .../bindings/power/xlnx,zynqmp-genpd.txt      |   2 +-
> > >  .../bindings/soc/bcm/brcm,bcm2835-pm.txt      |   2 +-
> > >  .../bindings/soc/mediatek/scpsys.txt          |   2 +-
> > >  .../bindings/soc/ti/sci-pm-domain.txt         |   2 +-
> > >  MAINTAINERS                                   |   2 +-
> > >  17 files changed, 149 insertions(+), 109 deletions(-)
> > >  rename Documentation/devicetree/bindings/power/{power_domain.txt => power-domain.txt} (51%)
> > >  create mode 100644 Documentation/devicetree/bindings/power/power-domain.yaml
> > >
> >
> > Reviewed-by: Rob Herring <robh@kernel.org>
>
> The patches should apply cleanly in top of your tree so maybe you can
> pick them up?

I didn't on this one because it touches a lot of files. Though on
second thought, they are all across the tree, so I might as well apply
them.

Rob

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 1/2] dt-bindings: power: Convert Generic Power Domain bindings to json-schema
  2019-11-14 16:41     ` Rob Herring
@ 2019-11-19  9:58       ` Geert Uytterhoeven
  2019-11-19 14:32         ` Krzysztof Kozlowski
  0 siblings, 1 reply; 8+ messages in thread
From: Geert Uytterhoeven @ 2019-11-19  9:58 UTC (permalink / raw)
  To: Rob Herring
  Cc: Krzysztof Kozlowski, Mark Rutland,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-samsung-soc, Kevin Hilman, Rafael J. Wysocki, linux-kernel,
	linux-clk,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE

Hi Rob, Krzysztof,

On Thu, Nov 14, 2019 at 5:42 PM Rob Herring <robh@kernel.org> wrote:
> On Thu, Nov 14, 2019 at 6:59 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > On Tue, Nov 05, 2019 at 01:42:58PM -0600, Rob Herring wrote:
> > > On Wed, 30 Oct 2019 18:32:15 +0100, Krzysztof Kozlowski wrote:
> > > > Convert Generic Power Domain bindings to DT schema format using
> > > > json-schema.
> > > >
> > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > > Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
> > > > Acked-by: Stephen Boyd <sboyd@kernel.org>
> > > >
> > > > ---
> > > >
> > > > Changes since v2:
> > > > 1. Keep description of consumers in power-domain.txt,
> > > > 2. Rename power_domain.txt to power-domain.txt,
> > > > 3. Indent example with four spaces (more readable).
> > > >
> > > > Changes since v1:
> > > > 1. Select all nodes for consumers,
> > > > 2. Remove from consumers duplicated properties with dt-schema,
> > > > 3. Fix power domain pattern,
> > > > 4. Remove unneeded types.
> > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > > ---
> > > >  .../devicetree/bindings/arm/arm,scmi.txt      |   2 +-
> > > >  .../devicetree/bindings/arm/arm,scpi.txt      |   2 +-
> > > >  .../bindings/arm/freescale/fsl,scu.txt        |   2 +-
> > > >  .../bindings/clock/renesas,cpg-mssr.txt       |   2 +-
> > > >  .../bindings/clock/ti/davinci/psc.txt         |   2 +-
> > > >  .../firmware/nvidia,tegra186-bpmp.txt         |   2 +-
> > > >  .../bindings/power/amlogic,meson-gx-pwrc.txt  |   2 +-
> > > >  .../devicetree/bindings/power/fsl,imx-gpc.txt |   2 +-
> > > >  .../bindings/power/fsl,imx-gpcv2.txt          |   2 +-
> > > >  .../{power_domain.txt => power-domain.txt}    |  95 +------------
> > > >  .../bindings/power/power-domain.yaml          | 133 ++++++++++++++++++
> > > >  .../bindings/power/renesas,sysc-rmobile.txt   |   2 +-
> > > >  .../bindings/power/xlnx,zynqmp-genpd.txt      |   2 +-
> > > >  .../bindings/soc/bcm/brcm,bcm2835-pm.txt      |   2 +-
> > > >  .../bindings/soc/mediatek/scpsys.txt          |   2 +-
> > > >  .../bindings/soc/ti/sci-pm-domain.txt         |   2 +-
> > > >  MAINTAINERS                                   |   2 +-
> > > >  17 files changed, 149 insertions(+), 109 deletions(-)
> > > >  rename Documentation/devicetree/bindings/power/{power_domain.txt => power-domain.txt} (51%)
> > > >  create mode 100644 Documentation/devicetree/bindings/power/power-domain.yaml
> > > >
> > >
> > > Reviewed-by: Rob Herring <robh@kernel.org>
> >
> > The patches should apply cleanly in top of your tree so maybe you can
> > pick them up?
>
> I didn't on this one because it touches a lot of files. Though on
> second thought, they are all across the tree, so I might as well apply
> them.

There are still several leftover references to power_domain.txt.
Krzysztof: Do you plan to convert these, too, or do you expect the
individual maintainers to handle that?

Thanks!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 1/2] dt-bindings: power: Convert Generic Power Domain bindings to json-schema
  2019-11-19  9:58       ` Geert Uytterhoeven
@ 2019-11-19 14:32         ` Krzysztof Kozlowski
  0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2019-11-19 14:32 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Rob Herring, Mark Rutland,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-samsung-soc, Kevin Hilman, Rafael J. Wysocki, linux-kernel,
	linux-clk,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE

On Tue, Nov 19, 2019 at 10:58:11AM +0100, Geert Uytterhoeven wrote:
> Hi Rob, Krzysztof,
> 
> On Thu, Nov 14, 2019 at 5:42 PM Rob Herring <robh@kernel.org> wrote:
> > On Thu, Nov 14, 2019 at 6:59 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > On Tue, Nov 05, 2019 at 01:42:58PM -0600, Rob Herring wrote:
> > > > On Wed, 30 Oct 2019 18:32:15 +0100, Krzysztof Kozlowski wrote:
> > > > > Convert Generic Power Domain bindings to DT schema format using
> > > > > json-schema.
> > > > >
> > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > > > Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
> > > > > Acked-by: Stephen Boyd <sboyd@kernel.org>
> > > > >
> > > > > ---
> > > > >
> > > > > Changes since v2:
> > > > > 1. Keep description of consumers in power-domain.txt,
> > > > > 2. Rename power_domain.txt to power-domain.txt,
> > > > > 3. Indent example with four spaces (more readable).
> > > > >
> > > > > Changes since v1:
> > > > > 1. Select all nodes for consumers,
> > > > > 2. Remove from consumers duplicated properties with dt-schema,
> > > > > 3. Fix power domain pattern,
> > > > > 4. Remove unneeded types.
> > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > > > ---
> > > > >  .../devicetree/bindings/arm/arm,scmi.txt      |   2 +-
> > > > >  .../devicetree/bindings/arm/arm,scpi.txt      |   2 +-
> > > > >  .../bindings/arm/freescale/fsl,scu.txt        |   2 +-
> > > > >  .../bindings/clock/renesas,cpg-mssr.txt       |   2 +-
> > > > >  .../bindings/clock/ti/davinci/psc.txt         |   2 +-
> > > > >  .../firmware/nvidia,tegra186-bpmp.txt         |   2 +-
> > > > >  .../bindings/power/amlogic,meson-gx-pwrc.txt  |   2 +-
> > > > >  .../devicetree/bindings/power/fsl,imx-gpc.txt |   2 +-
> > > > >  .../bindings/power/fsl,imx-gpcv2.txt          |   2 +-
> > > > >  .../{power_domain.txt => power-domain.txt}    |  95 +------------
> > > > >  .../bindings/power/power-domain.yaml          | 133 ++++++++++++++++++
> > > > >  .../bindings/power/renesas,sysc-rmobile.txt   |   2 +-
> > > > >  .../bindings/power/xlnx,zynqmp-genpd.txt      |   2 +-
> > > > >  .../bindings/soc/bcm/brcm,bcm2835-pm.txt      |   2 +-
> > > > >  .../bindings/soc/mediatek/scpsys.txt          |   2 +-
> > > > >  .../bindings/soc/ti/sci-pm-domain.txt         |   2 +-
> > > > >  MAINTAINERS                                   |   2 +-
> > > > >  17 files changed, 149 insertions(+), 109 deletions(-)
> > > > >  rename Documentation/devicetree/bindings/power/{power_domain.txt => power-domain.txt} (51%)
> > > > >  create mode 100644 Documentation/devicetree/bindings/power/power-domain.yaml
> > > > >
> > > >
> > > > Reviewed-by: Rob Herring <robh@kernel.org>
> > >
> > > The patches should apply cleanly in top of your tree so maybe you can
> > > pick them up?
> >
> > I didn't on this one because it touches a lot of files. Though on
> > second thought, they are all across the tree, so I might as well apply
> > them.
> 
> There are still several leftover references to power_domain.txt.
> Krzysztof: Do you plan to convert these, too, or do you expect the
> individual maintainers to handle that?

Ahh, I think that's my fault after one of iterations of the patchset. I
can fix it up fast and maybe let's queue it through the same tree (Rob's).

Best regards,
Krzysztof


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2019-11-19 14:32 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-30 17:32 [PATCH v3 1/2] dt-bindings: power: Convert Generic Power Domain bindings to json-schema Krzysztof Kozlowski
2019-10-30 17:32 ` [PATCH v3 2/2] dt-bindings: power: Convert Samsung Exynos " Krzysztof Kozlowski
2019-11-05 19:43   ` Rob Herring
2019-11-05 19:42 ` [PATCH v3 1/2] dt-bindings: power: Convert Generic " Rob Herring
2019-11-14 12:59   ` Krzysztof Kozlowski
2019-11-14 16:41     ` Rob Herring
2019-11-19  9:58       ` Geert Uytterhoeven
2019-11-19 14:32         ` Krzysztof Kozlowski

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).