linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Luca Weiss <luca@z3ntu.xyz>
To: linux-arm-msm@vger.kernel.org
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Luca Weiss <luca@z3ntu.xyz>, Andy Gross <agross@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] ARM: dts: msm8974: Add modem remoteproc node
Date: Thu, 14 Nov 2019 18:53:48 +0100	[thread overview]
Message-ID: <20191114175348.288976-1-luca@z3ntu.xyz> (raw)

From: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the remoteproc node for the modem on msm8974.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[luca@z3ntu.xyz: cleanups, add label to smd-edge node]
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Note: This patch needs "remoteproc: qcom_q6v5_mss: Validate each segment
during loading" from the mailing list to be functional.

 arch/arm/boot/dts/qcom-msm8974.dtsi | 63 ++++++++++++++++++++++++-----
 1 file changed, 54 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 6f24dc9a7924..b357cb51c0fb 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -21,12 +21,12 @@ reserved-memory {
 		#size-cells = <1>;
 		ranges;
 
-		mpss@8000000 {
+		mpss_region: mpss@8000000 {
 			reg = <0x08000000 0x5100000>;
 			no-map;
 		};
 
-		mba@d100000 {
+		mba_region: mba@d100000 {
 			reg = <0x0d100000 0x100000>;
 			no-map;
 		};
@@ -62,8 +62,11 @@ rfsa@fd60000 {
 		};
 
 		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
 			reg = <0x0fd80000 0x180000>;
 			no-map;
+
+			qcom,client-id = <1>;
 		};
 	};
 
@@ -807,6 +810,55 @@ rng@f9bff000 {
 			clock-names = "core";
 		};
 
+		remoteproc@fc880000 {
+			compatible = "qcom,msm8974-mss-pil";
+			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			cx-supply = <&pm8841_s2>;
+			mss-supply = <&pm8841_s3>;
+			mx-supply = <&pm8841_s1>;
+			pll-supply = <&pm8941_l12>;
+
+			qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			mba {
+				memory-region = <&mba_region>;
+			};
+
+			mpss {
+				memory-region = <&mpss_region>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 12>;
+				qcom,smd-edge = <0>;
+
+				label = "modem";
+			};
+		};
+
 		pronto: remoteproc@fb21b000 {
 			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
 			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
@@ -1524,13 +1576,6 @@ adsp {
 			qcom,smd-edge = <1>;
 		};
 
-		modem {
-			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&apcs 8 12>;
-			qcom,smd-edge = <0>;
-		};
-
 		rpm {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 			qcom,ipc = <&apcs 8 0>;
-- 
2.24.0


             reply	other threads:[~2019-11-14 17:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-14 17:53 Luca Weiss [this message]
2019-11-14 17:53 ` [PATCH 2/2] ARM: dts: msm8974: Move ADSP smd edge to ADSP PIL Luca Weiss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191114175348.288976-1-luca@z3ntu.xyz \
    --to=luca@z3ntu.xyz \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).