linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Andreas Färber" <afaerber@suse.de>
To: linux-realtek-soc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, "Andreas Färber" <afaerber@suse.de>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	devicetree@vger.kernel.org
Subject: [PATCH v3 4/8] ARM: dts: rtd1195: Introduce r-bus
Date: Sun, 17 Nov 2019 08:21:05 +0100	[thread overview]
Message-ID: <20191117072109.20402-5-afaerber@suse.de> (raw)
In-Reply-To: <20191117072109.20402-1-afaerber@suse.de>

Model Realtek's register bus in DT.

Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 v3: from RTD1395 v1
 * Fixed r-bus size from 0x100000 to 0x70000 in reg and ranges (James)
 * Renamed bus node from r-bus to bus (Rob)
 
 arch/arm/boot/dts/rtd1195.dtsi | 52 ++++++++++++++++++++++++------------------
 1 file changed, 30 insertions(+), 22 deletions(-)

diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
index 4e3866fe8f6e..f5174f828a28 100644
--- a/arch/arm/boot/dts/rtd1195.dtsi
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -92,28 +92,36 @@
 		         <0x18100000 0x18100000 0x01000000>,
 		         <0x40000000 0x40000000 0xc0000000>;
 
-		wdt: watchdog@18007680 {
-			compatible = "realtek,rtd1295-watchdog";
-			reg = <0x18007680 0x100>;
-			clocks = <&osc27M>;
-		};
-
-		uart0: serial@18007800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x18007800 0x400>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <27000000>;
-			status = "disabled";
-		};
-
-		uart1: serial@1801b200 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x1801b200 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <27000000>;
-			status = "disabled";
+		rbus: bus@18000000 {
+			compatible = "simple-bus";
+			reg = <0x18000000 0x70000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000000 0x70000>;
+
+			wdt: watchdog@7680 {
+				compatible = "realtek,rtd1295-watchdog";
+				reg = <0x7680 0x100>;
+				clocks = <&osc27M>;
+			};
+
+			uart0: serial@7800 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x7800 0x400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				clock-frequency = <27000000>;
+				status = "disabled";
+			};
+
+			uart1: serial@1b200 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x1b200 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				clock-frequency = <27000000>;
+				status = "disabled";
+			};
 		};
 
 		gic: interrupt-controller@ff011000 {
-- 
2.16.4


  parent reply	other threads:[~2019-11-17  7:21 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-17  7:21 [PATCH v3 0/8] ARM: Initial RTD1195 and MeLE X1000 support Andreas Färber
2019-11-17  7:21 ` [PATCH v3 1/8] dt-bindings: arm: realtek: Add RTD1195 and MeLE X1000 Andreas Färber
2019-11-17  7:21 ` [PATCH v3 2/8] ARM: Prepare Realtek RTD1195 Andreas Färber
2019-11-17  7:21 ` [PATCH v3 3/8] ARM: dts: Prepare Realtek RTD1195 and MeLE X1000 Andreas Färber
2019-11-17 10:47   ` Marc Zyngier
2019-11-17 15:40     ` Andreas Färber
2019-11-17 16:22       ` Marc Zyngier
2019-11-18  1:24         ` Andreas Färber
2019-11-18  9:14           ` Marc Zyngier
2019-11-17  7:21 ` Andreas Färber [this message]
2019-11-17  7:21 ` [PATCH v3 5/8] dt-bindings: reset: Add Realtek RTD1195 Andreas Färber
2019-11-17  7:21 ` [PATCH v3 6/8] ARM: dts: rtd1195: Add reset nodes Andreas Färber
2019-11-18  9:22   ` James Tai
2019-11-19  8:34     ` Andreas Färber
2019-11-20  6:53       ` James Tai
2019-11-17  7:21 ` [PATCH v3 7/8] ARM: dts: rtd1195: Add UART resets Andreas Färber
2019-11-17  7:21 ` [PATCH v3 8/8] ARM: realtek: Enable RTD1195 arch timer Andreas Färber
2019-11-17 11:02   ` Marc Zyngier
2019-11-17 17:08     ` Andreas Färber
2019-11-18  9:27       ` Marc Zyngier
2019-11-18 22:48         ` Andreas Färber
2020-03-20 16:16           ` James Tai [戴志峰]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191117072109.20402-5-afaerber@suse.de \
    --to=afaerber@suse.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-realtek-soc@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).