* [GIT PULL] perf/core improvements and fixes
@ 2019-11-19 11:32 Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 01/25] perf vendor events arm64: Fix commas so PMU event files are valid JSON Arnaldo Carvalho de Melo
` (25 more replies)
0 siblings, 26 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Arnaldo Carvalho de Melo, Adrian Hunter,
Ian Rogers, James Clark, Konstantin Khlebnikov, Masami Hiramatsu,
Arnaldo Carvalho de Melo
Hi Ingo/Thomas,
Please consider pulling,
Best regards,
- Arnaldo
The following changes since commit e1e9b78d3957a267346a86c8f2c433f6a332af65:
perf parse: Use YYABORT to clear stack after failure, plugging leaks (2019-11-12 08:34:16 -0300)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-5.5-20191119
for you to fetch changes up to a910e4666d61712840c78de33cc7f89de8affa78:
perf parse: Report initial event parsing error (2019-11-18 19:14:29 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
x86/insn:
Adrian Hunter:
- Add some more Intel instructions to the opcode map:
cldemote, encls, enclu, enclv, enqcmd, enqcmds, movdir64b,
movdiri, pconfig, tpause, umonitor, umwait, wbnoinvd.
- The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:
$ perf test -v "new " 2>&1 | grep -i cldemote
Decoded ok: 0f 1c 00 cldemote (%eax)
Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
Decoded ok: 0f 1c 00 cldemote (%rax)
Decoded ok: 41 0f 1c 00 cldemote (%r8)
Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
$ perf test -v "new " 2>&1 | grep -i tpause
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 41 0f ae f0 tpause %r8d
callchains:
Adrian Hunter:
- Fix segfault in thread__resolve_callchain_sample().
perf probe:
- Line fixes to show only lines where probes can be used with 'perf probe -L',
and when reporting them via 'perf probe -l'.
- Support multiprobe events.
perf scripts python:
Adrian Hunter:
- Fix use of TRUE with SQLite < 3.23 in exported-sql-viewer.py.
perf maps:
- Trim 'struct map' by removing the rb_node member for sorting
by map name, as that is only needed for processing kernel maps,
and only when classifying symbols by section at load time.
Sort them by name using qsort() and do lookups using bsearch()
when map_groups__find_by_name() is used.
perf parse:
Ian Rogers:
- Report initial event parsing error, providing a less cryptic message
to state that a PMU wasn't found in the system.
perf vendor events:
James Clark:
- Fix commas so that PMU event files for arm64, power8 and power nine
become valid JSON.
libtraceevent:
Konstantin Khlebnikov:
- Fix parsing of event %o and %X argument types.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Adrian Hunter (4):
perf scripts python: exported-sql-viewer.py: Fix use of TRUE with SQLite
perf callchain: Fix segfault in thread__resolve_callchain_sample()
x86/insn: perf tools: Add some instructions to the new instructions test
x86/insn: Add some Intel instructions to the opcode map
Arnaldo Carvalho de Melo (9):
perf maps: Purge the entries from maps->names in __maps__purge()
perf maps: Do not use an rbtree to sort by map name
perf map_groups: Add a front end cache for map lookups by name
perf map: No need to adjust the long name of modules
perf record: No need to process the synthesized MMAP events twice
perf machine: No need to check if kernel module maps pre-exist
perf map_groups: Auto sort maps by name, if needed
perf map: Use bitmap for booleans
perf map: Move seldom used ->flags field to second cacheline
Ian Rogers (1):
perf parse: Report initial event parsing error
James Clark (3):
perf vendor events arm64: Fix commas so PMU event files are valid JSON
perf vendor events power8: Fix commas so PMU event files are valid JSON
perf vendor events power9: Fix commas so PMU event files are valid JSON
Konstantin Khlebnikov (1):
libtraceevent: Fix parsing of event %o and %X argument types
Masami Hiramatsu (7):
perf probe: Show correct statement line number by perf probe -l
perf probe: Verify given line is a representive line
perf probe: Do not show non representive lines by perf-probe -L
perf probe: Generate event name with line number
perf probe: Support multiprobe event
perf probe: Support DW_AT_const_value constant value
perf probe: Trace a magic number if variable is not found
arch/x86/lib/x86-opcode-map.txt | 18 +-
tools/arch/x86/lib/x86-opcode-map.txt | 18 +-
tools/lib/traceevent/event-parse.c | 7 +-
tools/perf/arch/powerpc/util/kvm-stat.c | 4 +-
tools/perf/arch/x86/tests/insn-x86-dat-32.c | 52 +
tools/perf/arch/x86/tests/insn-x86-dat-64.c | 62 ++
tools/perf/arch/x86/tests/insn-x86-dat-src.c | 109 ++
tools/perf/builtin-record.c | 29 +-
tools/perf/builtin-stat.c | 2 +
tools/perf/builtin-trace.c | 16 +-
.../pmu-events/arch/arm64/ampere/emag/branch.json | 8 +-
.../pmu-events/arch/arm64/ampere/emag/bus.json | 14 +-
.../pmu-events/arch/arm64/ampere/emag/cache.json | 28 +-
.../pmu-events/arch/arm64/ampere/emag/clock.json | 2 +-
.../arch/arm64/ampere/emag/exception.json | 26 +-
.../arch/arm64/ampere/emag/instruction.json | 28 +-
.../arch/arm64/ampere/emag/intrinsic.json | 10 +-
.../pmu-events/arch/arm64/ampere/emag/memory.json | 12 +-
.../arch/arm64/ampere/emag/pipeline.json | 2 +-
.../arch/arm64/arm/cortex-a53/branch.json | 2 +-
.../pmu-events/arch/arm64/arm/cortex-a53/bus.json | 4 +-
.../arch/arm64/arm/cortex-a53/other.json | 4 +-
.../arm64/arm/cortex-a57-a72/core-imp-def.json | 120 +-
.../pmu-events/arch/arm64/armv8-recommended.json | 158 +--
.../arch/arm64/cavium/thunderx2/core-imp-def.json | 74 +-
.../arch/arm64/hisilicon/hip08/core-imp-def.json | 60 +-
.../arch/arm64/hisilicon/hip08/uncore-ddrc.json | 18 +-
.../arch/arm64/hisilicon/hip08/uncore-hha.json | 22 +-
.../arch/arm64/hisilicon/hip08/uncore-l3c.json | 28 +-
.../perf/pmu-events/arch/powerpc/power8/cache.json | 60 +-
.../arch/powerpc/power8/floating-point.json | 6 +-
.../pmu-events/arch/powerpc/power8/frontend.json | 158 +--
.../pmu-events/arch/powerpc/power8/marked.json | 266 ++---
.../pmu-events/arch/powerpc/power8/memory.json | 72 +-
.../perf/pmu-events/arch/powerpc/power8/other.json | 1150 ++++++++++----------
.../pmu-events/arch/powerpc/power8/pipeline.json | 118 +-
tools/perf/pmu-events/arch/powerpc/power8/pmc.json | 48 +-
.../arch/powerpc/power8/translation.json | 60 +-
.../perf/pmu-events/arch/powerpc/power9/cache.json | 44 +-
.../arch/powerpc/power9/floating-point.json | 14 +-
.../pmu-events/arch/powerpc/power9/frontend.json | 142 +--
.../pmu-events/arch/powerpc/power9/marked.json | 250 ++---
.../pmu-events/arch/powerpc/power9/memory.json | 52 +-
.../perf/pmu-events/arch/powerpc/power9/other.json | 934 ++++++++--------
.../pmu-events/arch/powerpc/power9/pipeline.json | 212 ++--
tools/perf/pmu-events/arch/powerpc/power9/pmc.json | 48 +-
.../arch/powerpc/power9/translation.json | 92 +-
tools/perf/scripts/python/exported-sql-viewer.py | 12 +-
tools/perf/tests/map_groups.c | 2 +-
tools/perf/tests/parse-events.c | 3 +-
tools/perf/util/dwarf-aux.c | 62 +-
tools/perf/util/machine.c | 43 +-
tools/perf/util/machine.h | 2 -
tools/perf/util/map.c | 116 +-
tools/perf/util/map.h | 7 +-
tools/perf/util/map_groups.h | 21 +-
tools/perf/util/metricgroup.c | 2 +-
tools/perf/util/parse-events.c | 78 +-
tools/perf/util/parse-events.h | 4 +
tools/perf/util/probe-event.c | 19 +-
tools/perf/util/probe-event.h | 3 +
tools/perf/util/probe-file.c | 14 +
tools/perf/util/probe-file.h | 2 +
tools/perf/util/probe-finder.c | 116 +-
tools/perf/util/probe-finder.h | 1 +
tools/perf/util/symbol.c | 84 +-
66 files changed, 2888 insertions(+), 2366 deletions(-)
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 01/25] perf vendor events arm64: Fix commas so PMU event files are valid JSON
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 02/25] perf vendor events power8: " Arnaldo Carvalho de Melo
` (24 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, James Clark, Arnaldo Carvalho de Melo,
Jiri Olsa, John Garry, Kevin Mooney, Mark Rutland,
Peter Zijlstra, nd
From: James Clark <james.clark@arm.com>
No functional change.
Add and remove extra commas in the arm64 JSON files so that the files
can be parsed and validated by other utilities such as Python that fail
to parse invalid JSON.
Committer testing:
Before:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/arm64/ampere/emag/branch.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/bus.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/cache.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/clock.json
parse error: unallowed token at this point in JSON text
[ { "PublicDescrip
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/exception.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/instruction.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/intrinsic.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/memory.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/pipeline.json
parse error: unallowed token at this point in JSON text
[ { "PublicDescrip
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/branch.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent": "BR
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/bus.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent":
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/other.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent":
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/armv8-recommended.json
parse error: after array element, I expect ',' or ']'
[ { "PublicDescrip
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/cavium/thunderx2/core-imp-def.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/core-imp-def.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-ddrc.json
parse error: invalid object key (must be a string)
[ { "EventCode": "0x00
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-hha.json
parse error: invalid object key (must be a string)
[ { "EventCode": "0x00
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-l3c.json
parse error: invalid object key (must be a string)
[ { "EventCode": "0x00
(right here) ------^
JSON is invalid
$
After:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/arm64/ampere/emag/branch.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/bus.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/cache.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/clock.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/exception.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/instruction.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/intrinsic.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/memory.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/pipeline.json
JSON is valid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/branch.json
JSON is valid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/bus.json
JSON is valid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/other.json
JSON is valid
tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json
JSON is valid
tools/perf/pmu-events/arch/arm64/armv8-recommended.json
JSON is valid
tools/perf/pmu-events/arch/arm64/cavium/thunderx2/core-imp-def.json
JSON is valid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/core-imp-def.json
JSON is valid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-ddrc.json
JSON is valid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-hha.json
JSON is valid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-l3c.json
JSON is valid
$
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kevin Mooney <kevin.mooney@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: nd@arm.com
Link: http://lore.kernel.org/lkml/20191112160342.26470-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
.../arch/arm64/ampere/emag/branch.json | 8 +-
.../arch/arm64/ampere/emag/bus.json | 14 +-
.../arch/arm64/ampere/emag/cache.json | 28 ++--
.../arch/arm64/ampere/emag/clock.json | 2 +-
.../arch/arm64/ampere/emag/exception.json | 26 +--
.../arch/arm64/ampere/emag/instruction.json | 28 ++--
.../arch/arm64/ampere/emag/intrinsic.json | 10 +-
.../arch/arm64/ampere/emag/memory.json | 12 +-
.../arch/arm64/ampere/emag/pipeline.json | 2 +-
.../arch/arm64/arm/cortex-a53/branch.json | 2 +-
.../arch/arm64/arm/cortex-a53/bus.json | 4 +-
.../arch/arm64/arm/cortex-a53/other.json | 4 +-
.../arm/cortex-a57-a72/core-imp-def.json | 120 ++++++-------
.../arch/arm64/armv8-recommended.json | 158 +++++++++---------
.../arm64/cavium/thunderx2/core-imp-def.json | 74 ++++----
.../arm64/hisilicon/hip08/core-imp-def.json | 60 +++----
.../arm64/hisilicon/hip08/uncore-ddrc.json | 18 +-
.../arm64/hisilicon/hip08/uncore-hha.json | 22 +--
.../arm64/hisilicon/hip08/uncore-l3c.json | 28 ++--
19 files changed, 310 insertions(+), 310 deletions(-)
diff --git a/tools/perf/pmu-events/arch/arm64/ampere/emag/branch.json b/tools/perf/pmu-events/arch/arm64/ampere/emag/branch.json
index abc98b018446..2d15b11e5383 100644
--- a/tools/perf/pmu-events/arch/arm64/ampere/emag/branch.json
+++ b/tools/perf/pmu-events/arch/arm64/ampere/emag/branch.json
@@ -1,12 +1,12 @@
[
{
- "ArchStdEvent": "BR_IMMED_SPEC",
+ "ArchStdEvent": "BR_IMMED_SPEC"
},
{
- "ArchStdEvent": "BR_RETURN_SPEC",
+ "ArchStdEvent": "BR_RETURN_SPEC"
},
{
- "ArchStdEvent": "BR_INDIRECT_SPEC",
+ "ArchStdEvent": "BR_INDIRECT_SPEC"
},
{
"PublicDescription": "Mispredicted or not predicted branch speculatively executed",
@@ -19,5 +19,5 @@
"EventCode": "0x12",
"EventName": "BR_PRED",
"BriefDescription": "Predictable branch"
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/ampere/emag/bus.json b/tools/perf/pmu-events/arch/arm64/ampere/emag/bus.json
index 687b2629e1d1..5c1a9a922ca4 100644
--- a/tools/perf/pmu-events/arch/arm64/ampere/emag/bus.json
+++ b/tools/perf/pmu-events/arch/arm64/ampere/emag/bus.json
@@ -1,26 +1,26 @@
[
{
- "ArchStdEvent": "BUS_ACCESS_RD",
+ "ArchStdEvent": "BUS_ACCESS_RD"
},
{
- "ArchStdEvent": "BUS_ACCESS_WR",
+ "ArchStdEvent": "BUS_ACCESS_WR"
},
{
- "ArchStdEvent": "BUS_ACCESS_SHARED",
+ "ArchStdEvent": "BUS_ACCESS_SHARED"
},
{
- "ArchStdEvent": "BUS_ACCESS_NOT_SHARED",
+ "ArchStdEvent": "BUS_ACCESS_NOT_SHARED"
},
{
- "ArchStdEvent": "BUS_ACCESS_NORMAL",
+ "ArchStdEvent": "BUS_ACCESS_NORMAL"
},
{
- "ArchStdEvent": "BUS_ACCESS_PERIPH",
+ "ArchStdEvent": "BUS_ACCESS_PERIPH"
},
{
"PublicDescription": "Bus access",
"EventCode": "0x19",
"EventName": "BUS_ACCESS",
"BriefDescription": "Bus access"
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/ampere/emag/cache.json b/tools/perf/pmu-events/arch/arm64/ampere/emag/cache.json
index df9201434cb6..40010a8724b3 100644
--- a/tools/perf/pmu-events/arch/arm64/ampere/emag/cache.json
+++ b/tools/perf/pmu-events/arch/arm64/ampere/emag/cache.json
@@ -1,42 +1,42 @@
[
{
- "ArchStdEvent": "L1D_CACHE_RD",
+ "ArchStdEvent": "L1D_CACHE_RD"
},
{
- "ArchStdEvent": "L1D_CACHE_WR",
+ "ArchStdEvent": "L1D_CACHE_WR"
},
{
- "ArchStdEvent": "L1D_CACHE_REFILL_RD",
+ "ArchStdEvent": "L1D_CACHE_REFILL_RD"
},
{
- "ArchStdEvent": "L1D_CACHE_INVAL",
+ "ArchStdEvent": "L1D_CACHE_INVAL"
},
{
- "ArchStdEvent": "L1D_TLB_REFILL_RD",
+ "ArchStdEvent": "L1D_TLB_REFILL_RD"
},
{
- "ArchStdEvent": "L1D_TLB_REFILL_WR",
+ "ArchStdEvent": "L1D_TLB_REFILL_WR"
},
{
- "ArchStdEvent": "L2D_CACHE_RD",
+ "ArchStdEvent": "L2D_CACHE_RD"
},
{
- "ArchStdEvent": "L2D_CACHE_WR",
+ "ArchStdEvent": "L2D_CACHE_WR"
},
{
- "ArchStdEvent": "L2D_CACHE_REFILL_RD",
+ "ArchStdEvent": "L2D_CACHE_REFILL_RD"
},
{
- "ArchStdEvent": "L2D_CACHE_REFILL_WR",
+ "ArchStdEvent": "L2D_CACHE_REFILL_WR"
},
{
- "ArchStdEvent": "L2D_CACHE_WB_VICTIM",
+ "ArchStdEvent": "L2D_CACHE_WB_VICTIM"
},
{
- "ArchStdEvent": "L2D_CACHE_WB_CLEAN",
+ "ArchStdEvent": "L2D_CACHE_WB_CLEAN"
},
{
- "ArchStdEvent": "L2D_CACHE_INVAL",
+ "ArchStdEvent": "L2D_CACHE_INVAL"
},
{
"PublicDescription": "Level 1 instruction cache refill",
@@ -187,5 +187,5 @@
"EventCode": "0x116",
"EventName": "PAGE_WALK_L2_STAGE2_HIT",
"BriefDescription": "Page walk, L2 stage-2 hit"
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/ampere/emag/clock.json b/tools/perf/pmu-events/arch/arm64/ampere/emag/clock.json
index 38cd1f1a70dc..51d1dc1519b2 100644
--- a/tools/perf/pmu-events/arch/arm64/ampere/emag/clock.json
+++ b/tools/perf/pmu-events/arch/arm64/ampere/emag/clock.json
@@ -16,5 +16,5 @@
"EventCode": "0x110",
"EventName": "Wait_CYCLES",
"BriefDescription": "Wait state cycle"
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/ampere/emag/exception.json b/tools/perf/pmu-events/arch/arm64/ampere/emag/exception.json
index 3720dc28a15f..66e51bc64b22 100644
--- a/tools/perf/pmu-events/arch/arm64/ampere/emag/exception.json
+++ b/tools/perf/pmu-events/arch/arm64/ampere/emag/exception.json
@@ -1,39 +1,39 @@
[
{
- "ArchStdEvent": "EXC_UNDEF",
+ "ArchStdEvent": "EXC_UNDEF"
},
{
- "ArchStdEvent": "EXC_SVC",
+ "ArchStdEvent": "EXC_SVC"
},
{
- "ArchStdEvent": "EXC_PABORT",
+ "ArchStdEvent": "EXC_PABORT"
},
{
- "ArchStdEvent": "EXC_DABORT",
+ "ArchStdEvent": "EXC_DABORT"
},
{
- "ArchStdEvent": "EXC_IRQ",
+ "ArchStdEvent": "EXC_IRQ"
},
{
- "ArchStdEvent": "EXC_FIQ",
+ "ArchStdEvent": "EXC_FIQ"
},
{
- "ArchStdEvent": "EXC_HVC",
+ "ArchStdEvent": "EXC_HVC"
},
{
- "ArchStdEvent": "EXC_TRAP_PABORT",
+ "ArchStdEvent": "EXC_TRAP_PABORT"
},
{
- "ArchStdEvent": "EXC_TRAP_DABORT",
+ "ArchStdEvent": "EXC_TRAP_DABORT"
},
{
- "ArchStdEvent": "EXC_TRAP_OTHER",
+ "ArchStdEvent": "EXC_TRAP_OTHER"
},
{
- "ArchStdEvent": "EXC_TRAP_IRQ",
+ "ArchStdEvent": "EXC_TRAP_IRQ"
},
{
- "ArchStdEvent": "EXC_TRAP_FIQ",
+ "ArchStdEvent": "EXC_TRAP_FIQ"
},
{
"PublicDescription": "Exception taken",
@@ -46,5 +46,5 @@
"EventCode": "0x0a",
"EventName": "EXC_RETURN",
"BriefDescription": "Exception return"
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/ampere/emag/instruction.json b/tools/perf/pmu-events/arch/arm64/ampere/emag/instruction.json
index 82cf753e6472..0d3e46776642 100644
--- a/tools/perf/pmu-events/arch/arm64/ampere/emag/instruction.json
+++ b/tools/perf/pmu-events/arch/arm64/ampere/emag/instruction.json
@@ -1,42 +1,42 @@
[
{
- "ArchStdEvent": "LD_SPEC",
+ "ArchStdEvent": "LD_SPEC"
},
{
- "ArchStdEvent": "ST_SPEC",
+ "ArchStdEvent": "ST_SPEC"
},
{
- "ArchStdEvent": "LDST_SPEC",
+ "ArchStdEvent": "LDST_SPEC"
},
{
- "ArchStdEvent": "DP_SPEC",
+ "ArchStdEvent": "DP_SPEC"
},
{
- "ArchStdEvent": "ASE_SPEC",
+ "ArchStdEvent": "ASE_SPEC"
},
{
- "ArchStdEvent": "VFP_SPEC",
+ "ArchStdEvent": "VFP_SPEC"
},
{
- "ArchStdEvent": "PC_WRITE_SPEC",
+ "ArchStdEvent": "PC_WRITE_SPEC"
},
{
- "ArchStdEvent": "CRYPTO_SPEC",
+ "ArchStdEvent": "CRYPTO_SPEC"
},
{
- "ArchStdEvent": "ISB_SPEC",
+ "ArchStdEvent": "ISB_SPEC"
},
{
- "ArchStdEvent": "DSB_SPEC",
+ "ArchStdEvent": "DSB_SPEC"
},
{
- "ArchStdEvent": "DMB_SPEC",
+ "ArchStdEvent": "DMB_SPEC"
},
{
- "ArchStdEvent": "RC_LD_SPEC",
+ "ArchStdEvent": "RC_LD_SPEC"
},
{
- "ArchStdEvent": "RC_ST_SPEC",
+ "ArchStdEvent": "RC_ST_SPEC"
},
{
"PublicDescription": "Instruction architecturally executed, software increment",
@@ -85,5 +85,5 @@
"EventCode": "0x100",
"EventName": "NOP_SPEC",
"BriefDescription": "Speculatively executed, NOP"
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/ampere/emag/intrinsic.json b/tools/perf/pmu-events/arch/arm64/ampere/emag/intrinsic.json
index 2aecc5c2347d..7ecffb989ae0 100644
--- a/tools/perf/pmu-events/arch/arm64/ampere/emag/intrinsic.json
+++ b/tools/perf/pmu-events/arch/arm64/ampere/emag/intrinsic.json
@@ -1,14 +1,14 @@
[
{
- "ArchStdEvent": "LDREX_SPEC",
+ "ArchStdEvent": "LDREX_SPEC"
},
{
- "ArchStdEvent": "STREX_PASS_SPEC",
+ "ArchStdEvent": "STREX_PASS_SPEC"
},
{
- "ArchStdEvent": "STREX_FAIL_SPEC",
+ "ArchStdEvent": "STREX_FAIL_SPEC"
},
{
- "ArchStdEvent": "STREX_SPEC",
- },
+ "ArchStdEvent": "STREX_SPEC"
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/ampere/emag/memory.json b/tools/perf/pmu-events/arch/arm64/ampere/emag/memory.json
index 08508697b318..c2fe674df960 100644
--- a/tools/perf/pmu-events/arch/arm64/ampere/emag/memory.json
+++ b/tools/perf/pmu-events/arch/arm64/ampere/emag/memory.json
@@ -1,18 +1,18 @@
[
{
- "ArchStdEvent": "MEM_ACCESS_RD",
+ "ArchStdEvent": "MEM_ACCESS_RD"
},
{
- "ArchStdEvent": "MEM_ACCESS_WR",
+ "ArchStdEvent": "MEM_ACCESS_WR"
},
{
- "ArchStdEvent": "UNALIGNED_LD_SPEC",
+ "ArchStdEvent": "UNALIGNED_LD_SPEC"
},
{
- "ArchStdEvent": "UNALIGNED_ST_SPEC",
+ "ArchStdEvent": "UNALIGNED_ST_SPEC"
},
{
- "ArchStdEvent": "UNALIGNED_LDST_SPEC",
+ "ArchStdEvent": "UNALIGNED_LDST_SPEC"
},
{
"PublicDescription": "Data memory access",
@@ -25,5 +25,5 @@
"EventCode": "0x1a",
"EventName": "MEM_ERROR",
"BriefDescription": "Memory error"
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/ampere/emag/pipeline.json b/tools/perf/pmu-events/arch/arm64/ampere/emag/pipeline.json
index e2087de586bf..17c71aba6612 100644
--- a/tools/perf/pmu-events/arch/arm64/ampere/emag/pipeline.json
+++ b/tools/perf/pmu-events/arch/arm64/ampere/emag/pipeline.json
@@ -46,5 +46,5 @@
"EventCode": "0x10f",
"EventName": "FX_STALL",
"BriefDescription": "FX stalled"
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/branch.json b/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/branch.json
index 0b0e6b26605b..8f5cf88aaf38 100644
--- a/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/branch.json
+++ b/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/branch.json
@@ -1,6 +1,6 @@
[
{
- "ArchStdEvent": "BR_INDIRECT_SPEC",
+ "ArchStdEvent": "BR_INDIRECT_SPEC"
},
{
"EventCode": "0xC9",
diff --git a/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/bus.json b/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/bus.json
index ce33b2553277..0a70b82f753f 100644
--- a/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/bus.json
+++ b/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/bus.json
@@ -1,8 +1,8 @@
[
{
- "ArchStdEvent": "BUS_ACCESS_RD",
+ "ArchStdEvent": "BUS_ACCESS_RD"
},
{
- "ArchStdEvent": "BUS_ACCESS_WR",
+ "ArchStdEvent": "BUS_ACCESS_WR"
}
]
diff --git a/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/other.json b/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/other.json
index 6cc6cbd7bf0b..e9f7e4c3900d 100644
--- a/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/other.json
+++ b/tools/perf/pmu-events/arch/arm64/arm/cortex-a53/other.json
@@ -1,9 +1,9 @@
[
{
- "ArchStdEvent": "EXC_IRQ",
+ "ArchStdEvent": "EXC_IRQ"
},
{
- "ArchStdEvent": "EXC_FIQ",
+ "ArchStdEvent": "EXC_FIQ"
},
{
"EventCode": "0xC6",
diff --git a/tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json b/tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json
index 0ac9b7927450..543c7692677a 100644
--- a/tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json
+++ b/tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json
@@ -1,179 +1,179 @@
[
{
- "ArchStdEvent": "L1D_CACHE_RD",
+ "ArchStdEvent": "L1D_CACHE_RD"
},
{
- "ArchStdEvent": "L1D_CACHE_WR",
+ "ArchStdEvent": "L1D_CACHE_WR"
},
{
- "ArchStdEvent": "L1D_CACHE_REFILL_RD",
+ "ArchStdEvent": "L1D_CACHE_REFILL_RD"
},
{
- "ArchStdEvent": "L1D_CACHE_REFILL_WR",
+ "ArchStdEvent": "L1D_CACHE_REFILL_WR"
},
{
- "ArchStdEvent": "L1D_CACHE_WB_VICTIM",
+ "ArchStdEvent": "L1D_CACHE_WB_VICTIM"
},
{
- "ArchStdEvent": "L1D_CACHE_WB_CLEAN",
+ "ArchStdEvent": "L1D_CACHE_WB_CLEAN"
},
{
- "ArchStdEvent": "L1D_CACHE_INVAL",
+ "ArchStdEvent": "L1D_CACHE_INVAL"
},
{
- "ArchStdEvent": "L1D_TLB_REFILL_RD",
+ "ArchStdEvent": "L1D_TLB_REFILL_RD"
},
{
- "ArchStdEvent": "L1D_TLB_REFILL_WR",
+ "ArchStdEvent": "L1D_TLB_REFILL_WR"
},
{
- "ArchStdEvent": "L2D_CACHE_RD",
+ "ArchStdEvent": "L2D_CACHE_RD"
},
{
- "ArchStdEvent": "L2D_CACHE_WR",
+ "ArchStdEvent": "L2D_CACHE_WR"
},
{
- "ArchStdEvent": "L2D_CACHE_REFILL_RD",
+ "ArchStdEvent": "L2D_CACHE_REFILL_RD"
},
{
- "ArchStdEvent": "L2D_CACHE_REFILL_WR",
+ "ArchStdEvent": "L2D_CACHE_REFILL_WR"
},
{
- "ArchStdEvent": "L2D_CACHE_WB_VICTIM",
+ "ArchStdEvent": "L2D_CACHE_WB_VICTIM"
},
{
- "ArchStdEvent": "L2D_CACHE_WB_CLEAN",
+ "ArchStdEvent": "L2D_CACHE_WB_CLEAN"
},
{
- "ArchStdEvent": "L2D_CACHE_INVAL",
+ "ArchStdEvent": "L2D_CACHE_INVAL"
},
{
- "ArchStdEvent": "BUS_ACCESS_RD",
+ "ArchStdEvent": "BUS_ACCESS_RD"
},
{
- "ArchStdEvent": "BUS_ACCESS_WR",
+ "ArchStdEvent": "BUS_ACCESS_WR"
},
{
- "ArchStdEvent": "BUS_ACCESS_SHARED",
+ "ArchStdEvent": "BUS_ACCESS_SHARED"
},
{
- "ArchStdEvent": "BUS_ACCESS_NOT_SHARED",
+ "ArchStdEvent": "BUS_ACCESS_NOT_SHARED"
},
{
- "ArchStdEvent": "BUS_ACCESS_NORMAL",
+ "ArchStdEvent": "BUS_ACCESS_NORMAL"
},
{
- "ArchStdEvent": "BUS_ACCESS_PERIPH",
+ "ArchStdEvent": "BUS_ACCESS_PERIPH"
},
{
- "ArchStdEvent": "MEM_ACCESS_RD",
+ "ArchStdEvent": "MEM_ACCESS_RD"
},
{
- "ArchStdEvent": "MEM_ACCESS_WR",
+ "ArchStdEvent": "MEM_ACCESS_WR"
},
{
- "ArchStdEvent": "UNALIGNED_LD_SPEC",
+ "ArchStdEvent": "UNALIGNED_LD_SPEC"
},
{
- "ArchStdEvent": "UNALIGNED_ST_SPEC",
+ "ArchStdEvent": "UNALIGNED_ST_SPEC"
},
{
- "ArchStdEvent": "UNALIGNED_LDST_SPEC",
+ "ArchStdEvent": "UNALIGNED_LDST_SPEC"
},
{
- "ArchStdEvent": "LDREX_SPEC",
+ "ArchStdEvent": "LDREX_SPEC"
},
{
- "ArchStdEvent": "STREX_PASS_SPEC",
+ "ArchStdEvent": "STREX_PASS_SPEC"
},
{
- "ArchStdEvent": "STREX_FAIL_SPEC",
+ "ArchStdEvent": "STREX_FAIL_SPEC"
},
{
- "ArchStdEvent": "LD_SPEC",
+ "ArchStdEvent": "LD_SPEC"
},
{
- "ArchStdEvent": "ST_SPEC",
+ "ArchStdEvent": "ST_SPEC"
},
{
- "ArchStdEvent": "LDST_SPEC",
+ "ArchStdEvent": "LDST_SPEC"
},
{
- "ArchStdEvent": "DP_SPEC",
+ "ArchStdEvent": "DP_SPEC"
},
{
- "ArchStdEvent": "ASE_SPEC",
+ "ArchStdEvent": "ASE_SPEC"
},
{
- "ArchStdEvent": "VFP_SPEC",
+ "ArchStdEvent": "VFP_SPEC"
},
{
- "ArchStdEvent": "PC_WRITE_SPEC",
+ "ArchStdEvent": "PC_WRITE_SPEC"
},
{
- "ArchStdEvent": "CRYPTO_SPEC",
+ "ArchStdEvent": "CRYPTO_SPEC"
},
{
- "ArchStdEvent": "BR_IMMED_SPEC",
+ "ArchStdEvent": "BR_IMMED_SPEC"
},
{
- "ArchStdEvent": "BR_RETURN_SPEC",
+ "ArchStdEvent": "BR_RETURN_SPEC"
},
{
- "ArchStdEvent": "BR_INDIRECT_SPEC",
+ "ArchStdEvent": "BR_INDIRECT_SPEC"
},
{
- "ArchStdEvent": "ISB_SPEC",
+ "ArchStdEvent": "ISB_SPEC"
},
{
- "ArchStdEvent": "DSB_SPEC",
+ "ArchStdEvent": "DSB_SPEC"
},
{
- "ArchStdEvent": "DMB_SPEC",
+ "ArchStdEvent": "DMB_SPEC"
},
{
- "ArchStdEvent": "EXC_UNDEF",
+ "ArchStdEvent": "EXC_UNDEF"
},
{
- "ArchStdEvent": "EXC_SVC",
+ "ArchStdEvent": "EXC_SVC"
},
{
- "ArchStdEvent": "EXC_PABORT",
+ "ArchStdEvent": "EXC_PABORT"
},
{
- "ArchStdEvent": "EXC_DABORT",
+ "ArchStdEvent": "EXC_DABORT"
},
{
- "ArchStdEvent": "EXC_IRQ",
+ "ArchStdEvent": "EXC_IRQ"
},
{
- "ArchStdEvent": "EXC_FIQ",
+ "ArchStdEvent": "EXC_FIQ"
},
{
- "ArchStdEvent": "EXC_SMC",
+ "ArchStdEvent": "EXC_SMC"
},
{
- "ArchStdEvent": "EXC_HVC",
+ "ArchStdEvent": "EXC_HVC"
},
{
- "ArchStdEvent": "EXC_TRAP_PABORT",
+ "ArchStdEvent": "EXC_TRAP_PABORT"
},
{
- "ArchStdEvent": "EXC_TRAP_DABORT",
+ "ArchStdEvent": "EXC_TRAP_DABORT"
},
{
- "ArchStdEvent": "EXC_TRAP_OTHER",
+ "ArchStdEvent": "EXC_TRAP_OTHER"
},
{
- "ArchStdEvent": "EXC_TRAP_IRQ",
+ "ArchStdEvent": "EXC_TRAP_IRQ"
},
{
- "ArchStdEvent": "EXC_TRAP_FIQ",
+ "ArchStdEvent": "EXC_TRAP_FIQ"
},
{
- "ArchStdEvent": "RC_LD_SPEC",
+ "ArchStdEvent": "RC_LD_SPEC"
},
{
- "ArchStdEvent": "RC_ST_SPEC",
- },
+ "ArchStdEvent": "RC_ST_SPEC"
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/armv8-recommended.json b/tools/perf/pmu-events/arch/arm64/armv8-recommended.json
index 6328828c018c..d0a19866563d 100644
--- a/tools/perf/pmu-events/arch/arm64/armv8-recommended.json
+++ b/tools/perf/pmu-events/arch/arm64/armv8-recommended.json
@@ -154,297 +154,297 @@
"EventCode": "0x61",
"EventName": "BUS_ACCESS_WR",
"BriefDescription": "Bus access write"
- }
+ },
{
"PublicDescription": "Bus access, Normal, Cacheable, Shareable",
"EventCode": "0x62",
"EventName": "BUS_ACCESS_SHARED",
"BriefDescription": "Bus access, Normal, Cacheable, Shareable"
- }
+ },
{
"PublicDescription": "Bus access, not Normal, Cacheable, Shareable",
"EventCode": "0x63",
"EventName": "BUS_ACCESS_NOT_SHARED",
"BriefDescription": "Bus access, not Normal, Cacheable, Shareable"
- }
+ },
{
"PublicDescription": "Bus access, Normal",
"EventCode": "0x64",
"EventName": "BUS_ACCESS_NORMAL",
"BriefDescription": "Bus access, Normal"
- }
+ },
{
"PublicDescription": "Bus access, peripheral",
"EventCode": "0x65",
"EventName": "BUS_ACCESS_PERIPH",
"BriefDescription": "Bus access, peripheral"
- }
+ },
{
"PublicDescription": "Data memory access, read",
"EventCode": "0x66",
"EventName": "MEM_ACCESS_RD",
"BriefDescription": "Data memory access, read"
- }
+ },
{
"PublicDescription": "Data memory access, write",
"EventCode": "0x67",
"EventName": "MEM_ACCESS_WR",
"BriefDescription": "Data memory access, write"
- }
+ },
{
"PublicDescription": "Unaligned access, read",
"EventCode": "0x68",
"EventName": "UNALIGNED_LD_SPEC",
"BriefDescription": "Unaligned access, read"
- }
+ },
{
"PublicDescription": "Unaligned access, write",
"EventCode": "0x69",
"EventName": "UNALIGNED_ST_SPEC",
"BriefDescription": "Unaligned access, write"
- }
+ },
{
"PublicDescription": "Unaligned access",
"EventCode": "0x6a",
"EventName": "UNALIGNED_LDST_SPEC",
"BriefDescription": "Unaligned access"
- }
+ },
{
"PublicDescription": "Exclusive operation speculatively executed, LDREX or LDX",
"EventCode": "0x6c",
"EventName": "LDREX_SPEC",
"BriefDescription": "Exclusive operation speculatively executed, LDREX or LDX"
- }
+ },
{
"PublicDescription": "Exclusive operation speculatively executed, STREX or STX pass",
"EventCode": "0x6d",
"EventName": "STREX_PASS_SPEC",
"BriefDescription": "Exclusive operation speculatively executed, STREX or STX pass"
- }
+ },
{
"PublicDescription": "Exclusive operation speculatively executed, STREX or STX fail",
"EventCode": "0x6e",
"EventName": "STREX_FAIL_SPEC",
"BriefDescription": "Exclusive operation speculatively executed, STREX or STX fail"
- }
+ },
{
"PublicDescription": "Exclusive operation speculatively executed, STREX or STX",
"EventCode": "0x6f",
"EventName": "STREX_SPEC",
"BriefDescription": "Exclusive operation speculatively executed, STREX or STX"
- }
+ },
{
"PublicDescription": "Operation speculatively executed, load",
"EventCode": "0x70",
"EventName": "LD_SPEC",
"BriefDescription": "Operation speculatively executed, load"
- }
+ },
{
- "PublicDescription": "Operation speculatively executed, store"
+ "PublicDescription": "Operation speculatively executed, store",
"EventCode": "0x71",
"EventName": "ST_SPEC",
"BriefDescription": "Operation speculatively executed, store"
- }
+ },
{
"PublicDescription": "Operation speculatively executed, load or store",
"EventCode": "0x72",
"EventName": "LDST_SPEC",
"BriefDescription": "Operation speculatively executed, load or store"
- }
+ },
{
"PublicDescription": "Operation speculatively executed, integer data processing",
"EventCode": "0x73",
"EventName": "DP_SPEC",
"BriefDescription": "Operation speculatively executed, integer data processing"
- }
+ },
{
"PublicDescription": "Operation speculatively executed, Advanced SIMD instruction",
"EventCode": "0x74",
"EventName": "ASE_SPEC",
- "BriefDescription": "Operation speculatively executed, Advanced SIMD instruction",
- }
+ "BriefDescription": "Operation speculatively executed, Advanced SIMD instruction"
+ },
{
"PublicDescription": "Operation speculatively executed, floating-point instruction",
"EventCode": "0x75",
"EventName": "VFP_SPEC",
"BriefDescription": "Operation speculatively executed, floating-point instruction"
- }
+ },
{
"PublicDescription": "Operation speculatively executed, software change of the PC",
"EventCode": "0x76",
"EventName": "PC_WRITE_SPEC",
"BriefDescription": "Operation speculatively executed, software change of the PC"
- }
+ },
{
"PublicDescription": "Operation speculatively executed, Cryptographic instruction",
"EventCode": "0x77",
"EventName": "CRYPTO_SPEC",
"BriefDescription": "Operation speculatively executed, Cryptographic instruction"
- }
+ },
{
- "PublicDescription": "Branch speculatively executed, immediate branch"
+ "PublicDescription": "Branch speculatively executed, immediate branch",
"EventCode": "0x78",
"EventName": "BR_IMMED_SPEC",
"BriefDescription": "Branch speculatively executed, immediate branch"
- }
+ },
{
- "PublicDescription": "Branch speculatively executed, procedure return"
+ "PublicDescription": "Branch speculatively executed, procedure return",
"EventCode": "0x79",
"EventName": "BR_RETURN_SPEC",
"BriefDescription": "Branch speculatively executed, procedure return"
- }
+ },
{
- "PublicDescription": "Branch speculatively executed, indirect branch"
+ "PublicDescription": "Branch speculatively executed, indirect branch",
"EventCode": "0x7a",
"EventName": "BR_INDIRECT_SPEC",
"BriefDescription": "Branch speculatively executed, indirect branch"
- }
+ },
{
- "PublicDescription": "Barrier speculatively executed, ISB"
+ "PublicDescription": "Barrier speculatively executed, ISB",
"EventCode": "0x7c",
"EventName": "ISB_SPEC",
"BriefDescription": "Barrier speculatively executed, ISB"
- }
+ },
{
- "PublicDescription": "Barrier speculatively executed, DSB"
+ "PublicDescription": "Barrier speculatively executed, DSB",
"EventCode": "0x7d",
"EventName": "DSB_SPEC",
"BriefDescription": "Barrier speculatively executed, DSB"
- }
+ },
{
- "PublicDescription": "Barrier speculatively executed, DMB"
+ "PublicDescription": "Barrier speculatively executed, DMB",
"EventCode": "0x7e",
"EventName": "DMB_SPEC",
"BriefDescription": "Barrier speculatively executed, DMB"
- }
+ },
{
- "PublicDescription": "Exception taken, Other synchronous"
+ "PublicDescription": "Exception taken, Other synchronous",
"EventCode": "0x81",
"EventName": "EXC_UNDEF",
"BriefDescription": "Exception taken, Other synchronous"
- }
+ },
{
- "PublicDescription": "Exception taken, Supervisor Call"
+ "PublicDescription": "Exception taken, Supervisor Call",
"EventCode": "0x82",
"EventName": "EXC_SVC",
"BriefDescription": "Exception taken, Supervisor Call"
- }
+ },
{
- "PublicDescription": "Exception taken, Instruction Abort"
+ "PublicDescription": "Exception taken, Instruction Abort",
"EventCode": "0x83",
"EventName": "EXC_PABORT",
"BriefDescription": "Exception taken, Instruction Abort"
- }
+ },
{
- "PublicDescription": "Exception taken, Data Abort and SError"
+ "PublicDescription": "Exception taken, Data Abort and SError",
"EventCode": "0x84",
"EventName": "EXC_DABORT",
"BriefDescription": "Exception taken, Data Abort and SError"
- }
+ },
{
- "PublicDescription": "Exception taken, IRQ"
+ "PublicDescription": "Exception taken, IRQ",
"EventCode": "0x86",
"EventName": "EXC_IRQ",
"BriefDescription": "Exception taken, IRQ"
- }
+ },
{
- "PublicDescription": "Exception taken, FIQ"
+ "PublicDescription": "Exception taken, FIQ",
"EventCode": "0x87",
"EventName": "EXC_FIQ",
"BriefDescription": "Exception taken, FIQ"
- }
+ },
{
- "PublicDescription": "Exception taken, Secure Monitor Call"
+ "PublicDescription": "Exception taken, Secure Monitor Call",
"EventCode": "0x88",
"EventName": "EXC_SMC",
"BriefDescription": "Exception taken, Secure Monitor Call"
- }
+ },
{
- "PublicDescription": "Exception taken, Hypervisor Call"
+ "PublicDescription": "Exception taken, Hypervisor Call",
"EventCode": "0x8a",
"EventName": "EXC_HVC",
"BriefDescription": "Exception taken, Hypervisor Call"
- }
+ },
{
- "PublicDescription": "Exception taken, Instruction Abort not taken locally"
+ "PublicDescription": "Exception taken, Instruction Abort not taken locally",
"EventCode": "0x8b",
"EventName": "EXC_TRAP_PABORT",
"BriefDescription": "Exception taken, Instruction Abort not taken locally"
- }
+ },
{
- "PublicDescription": "Exception taken, Data Abort or SError not taken locally"
+ "PublicDescription": "Exception taken, Data Abort or SError not taken locally",
"EventCode": "0x8c",
"EventName": "EXC_TRAP_DABORT",
"BriefDescription": "Exception taken, Data Abort or SError not taken locally"
- }
+ },
{
- "PublicDescription": "Exception taken, Other traps not taken locally"
+ "PublicDescription": "Exception taken, Other traps not taken locally",
"EventCode": "0x8d",
"EventName": "EXC_TRAP_OTHER",
"BriefDescription": "Exception taken, Other traps not taken locally"
- }
+ },
{
- "PublicDescription": "Exception taken, IRQ not taken locally"
+ "PublicDescription": "Exception taken, IRQ not taken locally",
"EventCode": "0x8e",
"EventName": "EXC_TRAP_IRQ",
"BriefDescription": "Exception taken, IRQ not taken locally"
- }
+ },
{
- "PublicDescription": "Exception taken, FIQ not taken locally"
+ "PublicDescription": "Exception taken, FIQ not taken locally",
"EventCode": "0x8f",
"EventName": "EXC_TRAP_FIQ",
"BriefDescription": "Exception taken, FIQ not taken locally"
- }
+ },
{
- "PublicDescription": "Release consistency operation speculatively executed, Load-Acquire"
+ "PublicDescription": "Release consistency operation speculatively executed, Load-Acquire",
"EventCode": "0x90",
"EventName": "RC_LD_SPEC",
"BriefDescription": "Release consistency operation speculatively executed, Load-Acquire"
- }
+ },
{
- "PublicDescription": "Release consistency operation speculatively executed, Store-Release"
+ "PublicDescription": "Release consistency operation speculatively executed, Store-Release",
"EventCode": "0x91",
"EventName": "RC_ST_SPEC",
"BriefDescription": "Release consistency operation speculatively executed, Store-Release"
- }
+ },
{
- "PublicDescription": "Attributable Level 3 data or unified cache access, read"
+ "PublicDescription": "Attributable Level 3 data or unified cache access, read",
"EventCode": "0xa0",
"EventName": "L3D_CACHE_RD",
"BriefDescription": "Attributable Level 3 data or unified cache access, read"
- }
+ },
{
- "PublicDescription": "Attributable Level 3 data or unified cache access, write"
+ "PublicDescription": "Attributable Level 3 data or unified cache access, write",
"EventCode": "0xa1",
"EventName": "L3D_CACHE_WR",
"BriefDescription": "Attributable Level 3 data or unified cache access, write"
- }
+ },
{
- "PublicDescription": "Attributable Level 3 data or unified cache refill, read"
+ "PublicDescription": "Attributable Level 3 data or unified cache refill, read",
"EventCode": "0xa2",
"EventName": "L3D_CACHE_REFILL_RD",
"BriefDescription": "Attributable Level 3 data or unified cache refill, read"
- }
+ },
{
- "PublicDescription": "Attributable Level 3 data or unified cache refill, write"
+ "PublicDescription": "Attributable Level 3 data or unified cache refill, write",
"EventCode": "0xa3",
"EventName": "L3D_CACHE_REFILL_WR",
"BriefDescription": "Attributable Level 3 data or unified cache refill, write"
- }
+ },
{
- "PublicDescription": "Attributable Level 3 data or unified cache Write-Back, victim"
+ "PublicDescription": "Attributable Level 3 data or unified cache Write-Back, victim",
"EventCode": "0xa6",
"EventName": "L3D_CACHE_WB_VICTIM",
"BriefDescription": "Attributable Level 3 data or unified cache Write-Back, victim"
- }
+ },
{
- "PublicDescription": "Attributable Level 3 data or unified cache Write-Back, cache clean"
+ "PublicDescription": "Attributable Level 3 data or unified cache Write-Back, cache clean",
"EventCode": "0xa7",
"EventName": "L3D_CACHE_WB_CLEAN",
"BriefDescription": "Attributable Level 3 data or unified cache Write-Back, cache clean"
- }
+ },
{
- "PublicDescription": "Attributable Level 3 data or unified cache access, invalidate"
+ "PublicDescription": "Attributable Level 3 data or unified cache access, invalidate",
"EventCode": "0xa8",
"EventName": "L3D_CACHE_INVAL",
"BriefDescription": "Attributable Level 3 data or unified cache access, invalidate"
diff --git a/tools/perf/pmu-events/arch/arm64/cavium/thunderx2/core-imp-def.json b/tools/perf/pmu-events/arch/arm64/cavium/thunderx2/core-imp-def.json
index 752e47eb6977..3a87d351cc39 100644
--- a/tools/perf/pmu-events/arch/arm64/cavium/thunderx2/core-imp-def.json
+++ b/tools/perf/pmu-events/arch/arm64/cavium/thunderx2/core-imp-def.json
@@ -1,113 +1,113 @@
[
{
- "ArchStdEvent": "L1D_CACHE_RD",
+ "ArchStdEvent": "L1D_CACHE_RD"
},
{
- "ArchStdEvent": "L1D_CACHE_WR",
+ "ArchStdEvent": "L1D_CACHE_WR"
},
{
- "ArchStdEvent": "L1D_CACHE_REFILL_RD",
+ "ArchStdEvent": "L1D_CACHE_REFILL_RD"
},
{
- "ArchStdEvent": "L1D_CACHE_REFILL_WR",
+ "ArchStdEvent": "L1D_CACHE_REFILL_WR"
},
{
- "ArchStdEvent": "L1D_CACHE_REFILL_INNER",
+ "ArchStdEvent": "L1D_CACHE_REFILL_INNER"
},
{
- "ArchStdEvent": "L1D_CACHE_REFILL_OUTER",
+ "ArchStdEvent": "L1D_CACHE_REFILL_OUTER"
},
{
- "ArchStdEvent": "L1D_CACHE_WB_VICTIM",
+ "ArchStdEvent": "L1D_CACHE_WB_VICTIM"
},
{
- "ArchStdEvent": "L1D_CACHE_WB_CLEAN",
+ "ArchStdEvent": "L1D_CACHE_WB_CLEAN"
},
{
- "ArchStdEvent": "L1D_CACHE_INVAL",
+ "ArchStdEvent": "L1D_CACHE_INVAL"
},
{
- "ArchStdEvent": "L1D_TLB_REFILL_RD",
+ "ArchStdEvent": "L1D_TLB_REFILL_RD"
},
{
- "ArchStdEvent": "L1D_TLB_REFILL_WR",
+ "ArchStdEvent": "L1D_TLB_REFILL_WR"
},
{
- "ArchStdEvent": "L1D_TLB_RD",
+ "ArchStdEvent": "L1D_TLB_RD"
},
{
- "ArchStdEvent": "L1D_TLB_WR",
+ "ArchStdEvent": "L1D_TLB_WR"
},
{
- "ArchStdEvent": "L2D_TLB_REFILL_RD",
+ "ArchStdEvent": "L2D_TLB_REFILL_RD"
},
{
- "ArchStdEvent": "L2D_TLB_REFILL_WR",
+ "ArchStdEvent": "L2D_TLB_REFILL_WR"
},
{
- "ArchStdEvent": "L2D_TLB_RD",
+ "ArchStdEvent": "L2D_TLB_RD"
},
{
- "ArchStdEvent": "L2D_TLB_WR",
+ "ArchStdEvent": "L2D_TLB_WR"
},
{
- "ArchStdEvent": "BUS_ACCESS_RD",
+ "ArchStdEvent": "BUS_ACCESS_RD"
},
{
- "ArchStdEvent": "BUS_ACCESS_WR",
+ "ArchStdEvent": "BUS_ACCESS_WR"
},
{
- "ArchStdEvent": "MEM_ACCESS_RD",
+ "ArchStdEvent": "MEM_ACCESS_RD"
},
{
- "ArchStdEvent": "MEM_ACCESS_WR",
+ "ArchStdEvent": "MEM_ACCESS_WR"
},
{
- "ArchStdEvent": "UNALIGNED_LD_SPEC",
+ "ArchStdEvent": "UNALIGNED_LD_SPEC"
},
{
- "ArchStdEvent": "UNALIGNED_ST_SPEC",
+ "ArchStdEvent": "UNALIGNED_ST_SPEC"
},
{
- "ArchStdEvent": "UNALIGNED_LDST_SPEC",
+ "ArchStdEvent": "UNALIGNED_LDST_SPEC"
},
{
- "ArchStdEvent": "EXC_UNDEF",
+ "ArchStdEvent": "EXC_UNDEF"
},
{
- "ArchStdEvent": "EXC_SVC",
+ "ArchStdEvent": "EXC_SVC"
},
{
- "ArchStdEvent": "EXC_PABORT",
+ "ArchStdEvent": "EXC_PABORT"
},
{
- "ArchStdEvent": "EXC_DABORT",
+ "ArchStdEvent": "EXC_DABORT"
},
{
- "ArchStdEvent": "EXC_IRQ",
+ "ArchStdEvent": "EXC_IRQ"
},
{
- "ArchStdEvent": "EXC_FIQ",
+ "ArchStdEvent": "EXC_FIQ"
},
{
- "ArchStdEvent": "EXC_SMC",
+ "ArchStdEvent": "EXC_SMC"
},
{
- "ArchStdEvent": "EXC_HVC",
+ "ArchStdEvent": "EXC_HVC"
},
{
- "ArchStdEvent": "EXC_TRAP_PABORT",
+ "ArchStdEvent": "EXC_TRAP_PABORT"
},
{
- "ArchStdEvent": "EXC_TRAP_DABORT",
+ "ArchStdEvent": "EXC_TRAP_DABORT"
},
{
- "ArchStdEvent": "EXC_TRAP_OTHER",
+ "ArchStdEvent": "EXC_TRAP_OTHER"
},
{
- "ArchStdEvent": "EXC_TRAP_IRQ",
+ "ArchStdEvent": "EXC_TRAP_IRQ"
},
{
- "ArchStdEvent": "EXC_TRAP_FIQ",
+ "ArchStdEvent": "EXC_TRAP_FIQ"
}
]
diff --git a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/core-imp-def.json b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/core-imp-def.json
index 9f0f15d15f75..a4a6408639b4 100644
--- a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/core-imp-def.json
+++ b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/core-imp-def.json
@@ -1,122 +1,122 @@
[
{
- "ArchStdEvent": "L1D_CACHE_RD",
+ "ArchStdEvent": "L1D_CACHE_RD"
},
{
- "ArchStdEvent": "L1D_CACHE_WR",
+ "ArchStdEvent": "L1D_CACHE_WR"
},
{
- "ArchStdEvent": "L1D_CACHE_REFILL_RD",
+ "ArchStdEvent": "L1D_CACHE_REFILL_RD"
},
{
- "ArchStdEvent": "L1D_CACHE_REFILL_WR",
+ "ArchStdEvent": "L1D_CACHE_REFILL_WR"
},
{
- "ArchStdEvent": "L1D_CACHE_WB_VICTIM",
+ "ArchStdEvent": "L1D_CACHE_WB_VICTIM"
},
{
- "ArchStdEvent": "L1D_CACHE_WB_CLEAN",
+ "ArchStdEvent": "L1D_CACHE_WB_CLEAN"
},
{
- "ArchStdEvent": "L1D_CACHE_INVAL",
+ "ArchStdEvent": "L1D_CACHE_INVAL"
},
{
- "ArchStdEvent": "L1D_TLB_REFILL_RD",
+ "ArchStdEvent": "L1D_TLB_REFILL_RD"
},
{
- "ArchStdEvent": "L1D_TLB_REFILL_WR",
+ "ArchStdEvent": "L1D_TLB_REFILL_WR"
},
{
- "ArchStdEvent": "L1D_TLB_RD",
+ "ArchStdEvent": "L1D_TLB_RD"
},
{
- "ArchStdEvent": "L1D_TLB_WR",
+ "ArchStdEvent": "L1D_TLB_WR"
},
{
- "ArchStdEvent": "L2D_CACHE_RD",
+ "ArchStdEvent": "L2D_CACHE_RD"
},
{
- "ArchStdEvent": "L2D_CACHE_WR",
+ "ArchStdEvent": "L2D_CACHE_WR"
},
{
- "ArchStdEvent": "L2D_CACHE_REFILL_RD",
+ "ArchStdEvent": "L2D_CACHE_REFILL_RD"
},
{
- "ArchStdEvent": "L2D_CACHE_REFILL_WR",
+ "ArchStdEvent": "L2D_CACHE_REFILL_WR"
},
{
- "ArchStdEvent": "L2D_CACHE_WB_VICTIM",
+ "ArchStdEvent": "L2D_CACHE_WB_VICTIM"
},
{
- "ArchStdEvent": "L2D_CACHE_WB_CLEAN",
+ "ArchStdEvent": "L2D_CACHE_WB_CLEAN"
},
{
- "ArchStdEvent": "L2D_CACHE_INVAL",
+ "ArchStdEvent": "L2D_CACHE_INVAL"
},
{
"PublicDescription": "Level 1 instruction cache prefetch access count",
"EventCode": "0x102e",
"EventName": "L1I_CACHE_PRF",
- "BriefDescription": "L1I cache prefetch access count",
+ "BriefDescription": "L1I cache prefetch access count"
},
{
"PublicDescription": "Level 1 instruction cache miss due to prefetch access count",
"EventCode": "0x102f",
"EventName": "L1I_CACHE_PRF_REFILL",
- "BriefDescription": "L1I cache miss due to prefetch access count",
+ "BriefDescription": "L1I cache miss due to prefetch access count"
},
{
"PublicDescription": "Instruction queue is empty",
"EventCode": "0x1043",
"EventName": "IQ_IS_EMPTY",
- "BriefDescription": "Instruction queue is empty",
+ "BriefDescription": "Instruction queue is empty"
},
{
"PublicDescription": "Instruction fetch stall cycles",
"EventCode": "0x1044",
"EventName": "IF_IS_STALL",
- "BriefDescription": "Instruction fetch stall cycles",
+ "BriefDescription": "Instruction fetch stall cycles"
},
{
"PublicDescription": "Instructions can receive, but not send",
"EventCode": "0x2014",
"EventName": "FETCH_BUBBLE",
- "BriefDescription": "Instructions can receive, but not send",
+ "BriefDescription": "Instructions can receive, but not send"
},
{
"PublicDescription": "Prefetch request from LSU",
"EventCode": "0x6013",
"EventName": "PRF_REQ",
- "BriefDescription": "Prefetch request from LSU",
+ "BriefDescription": "Prefetch request from LSU"
},
{
"PublicDescription": "Hit on prefetched data",
"EventCode": "0x6014",
"EventName": "HIT_ON_PRF",
- "BriefDescription": "Hit on prefetched data",
+ "BriefDescription": "Hit on prefetched data"
},
{
"PublicDescription": "Cycles of that the number of issuing micro operations are less than 4",
"EventCode": "0x7001",
"EventName": "EXE_STALL_CYCLE",
- "BriefDescription": "Cycles of that the number of issue ups are less than 4",
+ "BriefDescription": "Cycles of that the number of issue ups are less than 4"
},
{
"PublicDescription": "No any micro operation is issued and meanwhile any load operation is not resolved",
"EventCode": "0x7004",
"EventName": "MEM_STALL_ANYLOAD",
- "BriefDescription": "No any micro operation is issued and meanwhile any load operation is not resolved",
+ "BriefDescription": "No any micro operation is issued and meanwhile any load operation is not resolved"
},
{
"PublicDescription": "No any micro operation is issued and meanwhile there is any load operation missing L1 cache and pending data refill",
"EventCode": "0x7006",
"EventName": "MEM_STALL_L1MISS",
- "BriefDescription": "No any micro operation is issued and meanwhile there is any load operation missing L1 cache and pending data refill",
+ "BriefDescription": "No any micro operation is issued and meanwhile there is any load operation missing L1 cache and pending data refill"
},
{
"PublicDescription": "No any micro operation is issued and meanwhile there is any load operation missing both L1 and L2 cache and pending data refill from L3 cache",
"EventCode": "0x7007",
"EventName": "MEM_STALL_L2MISS",
- "BriefDescription": "No any micro operation is issued and meanwhile there is any load operation missing both L1 and L2 cache and pending data refill from L3 cache",
- },
+ "BriefDescription": "No any micro operation is issued and meanwhile there is any load operation missing both L1 and L2 cache and pending data refill from L3 cache"
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-ddrc.json b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-ddrc.json
index 7da86942dae2..61514d38601b 100644
--- a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-ddrc.json
+++ b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-ddrc.json
@@ -4,55 +4,55 @@
"EventName": "uncore_hisi_ddrc.flux_wr",
"BriefDescription": "DDRC total write operations",
"PublicDescription": "DDRC total write operations",
- "Unit": "hisi_sccl,ddrc",
+ "Unit": "hisi_sccl,ddrc"
},
{
"EventCode": "0x01",
"EventName": "uncore_hisi_ddrc.flux_rd",
"BriefDescription": "DDRC total read operations",
"PublicDescription": "DDRC total read operations",
- "Unit": "hisi_sccl,ddrc",
+ "Unit": "hisi_sccl,ddrc"
},
{
"EventCode": "0x02",
"EventName": "uncore_hisi_ddrc.flux_wcmd",
"BriefDescription": "DDRC write commands",
"PublicDescription": "DDRC write commands",
- "Unit": "hisi_sccl,ddrc",
+ "Unit": "hisi_sccl,ddrc"
},
{
"EventCode": "0x03",
"EventName": "uncore_hisi_ddrc.flux_rcmd",
"BriefDescription": "DDRC read commands",
"PublicDescription": "DDRC read commands",
- "Unit": "hisi_sccl,ddrc",
+ "Unit": "hisi_sccl,ddrc"
},
{
"EventCode": "0x04",
"EventName": "uncore_hisi_ddrc.pre_cmd",
"BriefDescription": "DDRC precharge commands",
"PublicDescription": "DDRC precharge commands",
- "Unit": "hisi_sccl,ddrc",
+ "Unit": "hisi_sccl,ddrc"
},
{
"EventCode": "0x05",
"EventName": "uncore_hisi_ddrc.act_cmd",
"BriefDescription": "DDRC active commands",
"PublicDescription": "DDRC active commands",
- "Unit": "hisi_sccl,ddrc",
+ "Unit": "hisi_sccl,ddrc"
},
{
"EventCode": "0x06",
"EventName": "uncore_hisi_ddrc.rnk_chg",
"BriefDescription": "DDRC rank commands",
"PublicDescription": "DDRC rank commands",
- "Unit": "hisi_sccl,ddrc",
+ "Unit": "hisi_sccl,ddrc"
},
{
"EventCode": "0x07",
"EventName": "uncore_hisi_ddrc.rw_chg",
"BriefDescription": "DDRC read and write changes",
"PublicDescription": "DDRC read and write changes",
- "Unit": "hisi_sccl,ddrc",
- },
+ "Unit": "hisi_sccl,ddrc"
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-hha.json b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-hha.json
index 3be418a248ea..ada86782933f 100644
--- a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-hha.json
+++ b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-hha.json
@@ -4,69 +4,69 @@
"EventName": "uncore_hisi_hha.rx_ops_num",
"BriefDescription": "The number of all operations received by the HHA",
"PublicDescription": "The number of all operations received by the HHA",
- "Unit": "hisi_sccl,hha",
+ "Unit": "hisi_sccl,hha"
},
{
"EventCode": "0x01",
"EventName": "uncore_hisi_hha.rx_outer",
"BriefDescription": "The number of all operations received by the HHA from another socket",
"PublicDescription": "The number of all operations received by the HHA from another socket",
- "Unit": "hisi_sccl,hha",
+ "Unit": "hisi_sccl,hha"
},
{
"EventCode": "0x02",
"EventName": "uncore_hisi_hha.rx_sccl",
"BriefDescription": "The number of all operations received by the HHA from another SCCL in this socket",
"PublicDescription": "The number of all operations received by the HHA from another SCCL in this socket",
- "Unit": "hisi_sccl,hha",
+ "Unit": "hisi_sccl,hha"
},
{
"EventCode": "0x03",
"EventName": "uncore_hisi_hha.rx_ccix",
"BriefDescription": "Count of the number of operations that HHA has received from CCIX",
"PublicDescription": "Count of the number of operations that HHA has received from CCIX",
- "Unit": "hisi_sccl,hha",
+ "Unit": "hisi_sccl,hha"
},
{
"EventCode": "0x1c",
"EventName": "uncore_hisi_hha.rd_ddr_64b",
"BriefDescription": "The number of read operations sent by HHA to DDRC which size is 64 bytes",
"PublicDescription": "The number of read operations sent by HHA to DDRC which size is 64bytes",
- "Unit": "hisi_sccl,hha",
+ "Unit": "hisi_sccl,hha"
},
{
"EventCode": "0x1d",
"EventName": "uncore_hisi_hha.wr_ddr_64b",
"BriefDescription": "The number of write operations sent by HHA to DDRC which size is 64 bytes",
"PublicDescription": "The number of write operations sent by HHA to DDRC which size is 64 bytes",
- "Unit": "hisi_sccl,hha",
+ "Unit": "hisi_sccl,hha"
},
{
"EventCode": "0x1e",
"EventName": "uncore_hisi_hha.rd_ddr_128b",
"BriefDescription": "The number of read operations sent by HHA to DDRC which size is 128 bytes",
"PublicDescription": "The number of read operations sent by HHA to DDRC which size is 128 bytes",
- "Unit": "hisi_sccl,hha",
+ "Unit": "hisi_sccl,hha"
},
{
"EventCode": "0x1f",
"EventName": "uncore_hisi_hha.wr_ddr_128b",
"BriefDescription": "The number of write operations sent by HHA to DDRC which size is 128 bytes",
"PublicDescription": "The number of write operations sent by HHA to DDRC which size is 128 bytes",
- "Unit": "hisi_sccl,hha",
+ "Unit": "hisi_sccl,hha"
},
{
"EventCode": "0x20",
"EventName": "uncore_hisi_hha.spill_num",
"BriefDescription": "Count of the number of spill operations that the HHA has sent",
"PublicDescription": "Count of the number of spill operations that the HHA has sent",
- "Unit": "hisi_sccl,hha",
+ "Unit": "hisi_sccl,hha"
},
{
"EventCode": "0x21",
"EventName": "uncore_hisi_hha.spill_success",
"BriefDescription": "Count of the number of successful spill operations that the HHA has sent",
"PublicDescription": "Count of the number of successful spill operations that the HHA has sent",
- "Unit": "hisi_sccl,hha",
- },
+ "Unit": "hisi_sccl,hha"
+ }
]
diff --git a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-l3c.json b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-l3c.json
index f463d0acfaef..67ab19e8cf3a 100644
--- a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-l3c.json
+++ b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-l3c.json
@@ -4,90 +4,90 @@
"EventName": "uncore_hisi_l3c.rd_cpipe",
"BriefDescription": "Total read accesses",
"PublicDescription": "Total read accesses",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x01",
"EventName": "uncore_hisi_l3c.wr_cpipe",
"BriefDescription": "Total write accesses",
"PublicDescription": "Total write accesses",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x02",
"EventName": "uncore_hisi_l3c.rd_hit_cpipe",
"BriefDescription": "Total read hits",
"PublicDescription": "Total read hits",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x03",
"EventName": "uncore_hisi_l3c.wr_hit_cpipe",
"BriefDescription": "Total write hits",
"PublicDescription": "Total write hits",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x04",
"EventName": "uncore_hisi_l3c.victim_num",
"BriefDescription": "l3c precharge commands",
"PublicDescription": "l3c precharge commands",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x20",
"EventName": "uncore_hisi_l3c.rd_spipe",
"BriefDescription": "Count of the number of read lines that come from this cluster of CPU core in spipe",
"PublicDescription": "Count of the number of read lines that come from this cluster of CPU core in spipe",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x21",
"EventName": "uncore_hisi_l3c.wr_spipe",
"BriefDescription": "Count of the number of write lines that come from this cluster of CPU core in spipe",
"PublicDescription": "Count of the number of write lines that come from this cluster of CPU core in spipe",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x22",
"EventName": "uncore_hisi_l3c.rd_hit_spipe",
"BriefDescription": "Count of the number of read lines that hits in spipe of this L3C",
"PublicDescription": "Count of the number of read lines that hits in spipe of this L3C",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x23",
"EventName": "uncore_hisi_l3c.wr_hit_spipe",
"BriefDescription": "Count of the number of write lines that hits in spipe of this L3C",
"PublicDescription": "Count of the number of write lines that hits in spipe of this L3C",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x29",
"EventName": "uncore_hisi_l3c.back_invalid",
"BriefDescription": "Count of the number of L3C back invalid operations",
"PublicDescription": "Count of the number of L3C back invalid operations",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x40",
"EventName": "uncore_hisi_l3c.retry_cpu",
"BriefDescription": "Count of the number of retry that L3C suppresses the CPU operations",
"PublicDescription": "Count of the number of retry that L3C suppresses the CPU operations",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x41",
"EventName": "uncore_hisi_l3c.retry_ring",
"BriefDescription": "Count of the number of retry that L3C suppresses the ring operations",
"PublicDescription": "Count of the number of retry that L3C suppresses the ring operations",
- "Unit": "hisi_sccl,l3c",
+ "Unit": "hisi_sccl,l3c"
},
{
"EventCode": "0x42",
"EventName": "uncore_hisi_l3c.prefetch_drop",
"BriefDescription": "Count of the number of prefetch drops from this L3C",
"PublicDescription": "Count of the number of prefetch drops from this L3C",
- "Unit": "hisi_sccl,l3c",
- },
+ "Unit": "hisi_sccl,l3c"
+ }
]
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 02/25] perf vendor events power8: Fix commas so PMU event files are valid JSON
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 01/25] perf vendor events arm64: Fix commas so PMU event files are valid JSON Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 03/25] perf vendor events power9: " Arnaldo Carvalho de Melo
` (23 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, James Clark, Arnaldo Carvalho de Melo,
Jiri Olsa, Kevin Mooney, Madhavan Srinivasan, Mamatha Inamdar,
Mark Rutland, Peter Zijlstra, Ravi Bangoria, nd
From: James Clark <james.clark@arm.com>
No functional change.
Remove extra commas in the power8 JSON files so that the files
can be parsed and validated by other utilities such as Python
that fail to parse invalid JSON.
Committer testing:
Before:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/powerpc/power8/cache.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x4c0
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/floating-point.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x200
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/frontend.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x250
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/marked.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x351
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/memory.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x100
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/other.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x1f0
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/pipeline.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x100
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/pmc.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x200
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/translation.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x4c0
(right here) ------^
JSON is invalid
$
After:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/powerpc/power8/cache.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/floating-point.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/frontend.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/marked.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/memory.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/other.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/pipeline.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/pmc.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/translation.json
JSON is valid
$
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kevin Mooney <kevin.mooney@arm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: nd@arm.com
Link: http://lore.kernel.org/lkml/20191112160342.26470-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
.../pmu-events/arch/powerpc/power8/cache.json | 60 +-
.../arch/powerpc/power8/floating-point.json | 6 +-
.../arch/powerpc/power8/frontend.json | 158 +--
.../arch/powerpc/power8/marked.json | 266 ++--
.../arch/powerpc/power8/memory.json | 72 +-
.../pmu-events/arch/powerpc/power8/other.json | 1150 ++++++++---------
.../arch/powerpc/power8/pipeline.json | 118 +-
.../pmu-events/arch/powerpc/power8/pmc.json | 48 +-
.../arch/powerpc/power8/translation.json | 60 +-
9 files changed, 969 insertions(+), 969 deletions(-)
diff --git a/tools/perf/pmu-events/arch/powerpc/power8/cache.json b/tools/perf/pmu-events/arch/powerpc/power8/cache.json
index 4a3daa6b4b96..6b792b2c87e2 100644
--- a/tools/perf/pmu-events/arch/powerpc/power8/cache.json
+++ b/tools/perf/pmu-events/arch/powerpc/power8/cache.json
@@ -1,176 +1,176 @@
[
- {,
+ {
"EventCode": "0x4c048",
"EventName": "PM_DATA_FROM_DL2L3_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a demand load",
"PublicDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x3c048",
"EventName": "PM_DATA_FROM_DL2L3_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a demand load",
"PublicDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x3c04c",
"EventName": "PM_DATA_FROM_DL4",
"BriefDescription": "The processor's data cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x1c042",
"EventName": "PM_DATA_FROM_L2",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from local core's L2 due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x200fe",
"EventName": "PM_DATA_FROM_L2MISS",
"BriefDescription": "Demand LD - L2 Miss (not L2 hit)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1c04e",
"EventName": "PM_DATA_FROM_L2MISS_MOD",
"BriefDescription": "The processor's data cache was reloaded from a localtion other than the local core's L2 due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from a localtion other than the local core's L2 due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x3c040",
"EventName": "PM_DATA_FROM_L2_DISP_CONFLICT_LDHITST",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 with load hit store conflict due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from local core's L2 with load hit store conflict due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x4c040",
"EventName": "PM_DATA_FROM_L2_DISP_CONFLICT_OTHER",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 with dispatch conflict due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from local core's L2 with dispatch conflict due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x2c040",
"EventName": "PM_DATA_FROM_L2_MEPF",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x1c040",
"EventName": "PM_DATA_FROM_L2_NO_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 without conflict due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from local core's L2 without conflict due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x4c042",
"EventName": "PM_DATA_FROM_L3",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from local core's L3 due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x300fe",
"EventName": "PM_DATA_FROM_L3MISS",
"BriefDescription": "Demand LD - L3 Miss (not L2 hit and not L3 hit)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c04e",
"EventName": "PM_DATA_FROM_L3MISS_MOD",
"BriefDescription": "The processor's data cache was reloaded from a localtion other than the local core's L3 due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from a localtion other than the local core's L3 due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x3c042",
"EventName": "PM_DATA_FROM_L3_DISP_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 with dispatch conflict due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from local core's L3 with dispatch conflict due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x2c042",
"EventName": "PM_DATA_FROM_L3_MEPF",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x1c044",
"EventName": "PM_DATA_FROM_L3_NO_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 without conflict due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from local core's L3 without conflict due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x1c04c",
"EventName": "PM_DATA_FROM_LL4",
"BriefDescription": "The processor's data cache was reloaded from the local chip's L4 cache due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from the local chip's L4 cache due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x4c04a",
"EventName": "PM_DATA_FROM_OFF_CHIP_CACHE",
"BriefDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a demand load",
"PublicDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x1c048",
"EventName": "PM_DATA_FROM_ON_CHIP_CACHE",
"BriefDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to a demand load",
"PublicDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x2c046",
"EventName": "PM_DATA_FROM_RL2L3_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a demand load",
"PublicDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x1c04a",
"EventName": "PM_DATA_FROM_RL2L3_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a demand load",
"PublicDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x3001a",
"EventName": "PM_DATA_TABLEWALK_CYC",
"BriefDescription": "Tablwalk Cycles (could be 1 or 2 active)",
"PublicDescription": "Data Tablewalk Active"
},
- {,
+ {
"EventCode": "0x4e04e",
"EventName": "PM_DPTEG_FROM_L3MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a localtion other than the local core's L3 due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xd094",
"EventName": "PM_DSLB_MISS",
"BriefDescription": "Data SLB Miss - Total of all segment sizes",
"PublicDescription": "Data SLB Miss - Total of all segment sizesData SLB misses"
},
- {,
+ {
"EventCode": "0x1002c",
"EventName": "PM_L1_DCACHE_RELOADED_ALL",
"BriefDescription": "L1 data cache reloaded for demand or prefetch",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x300f6",
"EventName": "PM_L1_DCACHE_RELOAD_VALID",
"BriefDescription": "DL1 reloaded due to Demand Load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3e054",
"EventName": "PM_LD_MISS_L1",
"BriefDescription": "Load Missed L1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x100ee",
"EventName": "PM_LD_REF_L1",
"BriefDescription": "All L1 D cache load references counted at finish, gated by reject",
"PublicDescription": "Load Ref count combined for all units"
},
- {,
+ {
"EventCode": "0x300f0",
"EventName": "PM_ST_MISS_L1",
"BriefDescription": "Store Missed L1",
"PublicDescription": ""
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/powerpc/power8/floating-point.json b/tools/perf/pmu-events/arch/powerpc/power8/floating-point.json
index 5f1bb9fca40c..4ef0d01b7f5e 100644
--- a/tools/perf/pmu-events/arch/powerpc/power8/floating-point.json
+++ b/tools/perf/pmu-events/arch/powerpc/power8/floating-point.json
@@ -1,14 +1,14 @@
[
- {,
+ {
"EventCode": "0x2000e",
"EventName": "PM_FXU_BUSY",
"BriefDescription": "fxu0 busy and fxu1 busy",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1000e",
"EventName": "PM_FXU_IDLE",
"BriefDescription": "fxu0 idle and fxu1 idle",
"PublicDescription": ""
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/powerpc/power8/frontend.json b/tools/perf/pmu-events/arch/powerpc/power8/frontend.json
index 04c5f1b7bee1..1ddc30655d43 100644
--- a/tools/perf/pmu-events/arch/powerpc/power8/frontend.json
+++ b/tools/perf/pmu-events/arch/powerpc/power8/frontend.json
@@ -1,470 +1,470 @@
[
- {,
+ {
"EventCode": "0x2505e",
"EventName": "PM_BACK_BR_CMPL",
"BriefDescription": "Branch instruction completed with a target address less than current instruction address",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10068",
"EventName": "PM_BRU_FIN",
"BriefDescription": "Branch Instruction Finished",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20036",
"EventName": "PM_BR_2PATH",
"BriefDescription": "two path branch",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40060",
"EventName": "PM_BR_CMPL",
"BriefDescription": "Branch Instruction completed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x400f6",
"EventName": "PM_BR_MPRED_CMPL",
"BriefDescription": "Number of Branch Mispredicts",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x200fa",
"EventName": "PM_BR_TAKEN_CMPL",
"BriefDescription": "New event for Branch Taken",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10018",
"EventName": "PM_IC_DEMAND_CYC",
"BriefDescription": "Cycles when a demand ifetch was pending",
"PublicDescription": "Demand ifetch pending"
},
- {,
+ {
"EventCode": "0x100f6",
"EventName": "PM_IERAT_RELOAD",
"BriefDescription": "Number of I-ERAT reloads",
"PublicDescription": "IERAT Reloaded (Miss)"
},
- {,
+ {
"EventCode": "0x4006a",
"EventName": "PM_IERAT_RELOAD_16M",
"BriefDescription": "IERAT Reloaded (Miss) for a 16M page",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20064",
"EventName": "PM_IERAT_RELOAD_4K",
"BriefDescription": "IERAT Miss (Not implemented as DI on POWER6)",
"PublicDescription": "IERAT Reloaded (Miss) for a 4k page"
},
- {,
+ {
"EventCode": "0x3006a",
"EventName": "PM_IERAT_RELOAD_64K",
"BriefDescription": "IERAT Reloaded (Miss) for a 64k page",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x14050",
"EventName": "PM_INST_CHIP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was chip pump (prediction=correct) for an instruction fetch",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was chip pump (prediction=correct) for an instruction fetch"
},
- {,
+ {
"EventCode": "0x2",
"EventName": "PM_INST_CMPL",
"BriefDescription": "Number of PowerPC Instructions that completed",
"PublicDescription": "PPC Instructions Finished (completed)"
},
- {,
+ {
"EventCode": "0x200f2",
"EventName": "PM_INST_DISP",
"BriefDescription": "PPC Dispatched",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x44048",
"EventName": "PM_INST_FROM_DL2L3_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x34048",
"EventName": "PM_INST_FROM_DL2L3_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x3404c",
"EventName": "PM_INST_FROM_DL4",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x4404c",
"EventName": "PM_INST_FROM_DMEM",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's memory on the same Node or Group (Distant) due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from another chip's memory on the same Node or Group (Distant) due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x14042",
"EventName": "PM_INST_FROM_L2",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L2 due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x1404e",
"EventName": "PM_INST_FROM_L2MISS",
"BriefDescription": "The processor's Instruction cache was reloaded from a localtion other than the local core's L2 due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from a localtion other than the local core's L2 due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x34040",
"EventName": "PM_INST_FROM_L2_DISP_CONFLICT_LDHITST",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 with load hit store conflict due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L2 with load hit store conflict due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x44040",
"EventName": "PM_INST_FROM_L2_DISP_CONFLICT_OTHER",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 with dispatch conflict due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L2 with dispatch conflict due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x24040",
"EventName": "PM_INST_FROM_L2_MEPF",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state. due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state. due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x14040",
"EventName": "PM_INST_FROM_L2_NO_CONFLICT",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 without conflict due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L2 without conflict due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x44042",
"EventName": "PM_INST_FROM_L3",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L3 due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x300fa",
"EventName": "PM_INST_FROM_L3MISS",
"BriefDescription": "Marked instruction was reloaded from a location beyond the local chiplet",
"PublicDescription": "Inst from L3 miss"
},
- {,
+ {
"EventCode": "0x4404e",
"EventName": "PM_INST_FROM_L3MISS_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded from a localtion other than the local core's L3 due to a instruction fetch",
"PublicDescription": "The processor's Instruction cache was reloaded from a localtion other than the local core's L3 due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x34042",
"EventName": "PM_INST_FROM_L3_DISP_CONFLICT",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 with dispatch conflict due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L3 with dispatch conflict due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x24042",
"EventName": "PM_INST_FROM_L3_MEPF",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state. due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state. due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x14044",
"EventName": "PM_INST_FROM_L3_NO_CONFLICT",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 without conflict due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L3 without conflict due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x1404c",
"EventName": "PM_INST_FROM_LL4",
"BriefDescription": "The processor's Instruction cache was reloaded from the local chip's L4 cache due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from the local chip's L4 cache due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x24048",
"EventName": "PM_INST_FROM_LMEM",
"BriefDescription": "The processor's Instruction cache was reloaded from the local chip's Memory due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from the local chip's Memory due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x2404c",
"EventName": "PM_INST_FROM_MEMORY",
"BriefDescription": "The processor's Instruction cache was reloaded from a memory location including L4 from local remote or distant due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from a memory location including L4 from local remote or distant due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x4404a",
"EventName": "PM_INST_FROM_OFF_CHIP_CACHE",
"BriefDescription": "The processor's Instruction cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x14048",
"EventName": "PM_INST_FROM_ON_CHIP_CACHE",
"BriefDescription": "The processor's Instruction cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x24046",
"EventName": "PM_INST_FROM_RL2L3_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x1404a",
"EventName": "PM_INST_FROM_RL2L3_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x2404a",
"EventName": "PM_INST_FROM_RL4",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x3404a",
"EventName": "PM_INST_FROM_RMEM",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x24050",
"EventName": "PM_INST_GRP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was group pump (prediction=correct) for an instruction fetch",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was group pump for an instruction fetch"
},
- {,
+ {
"EventCode": "0x24052",
"EventName": "PM_INST_GRP_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (Group) ended up either larger or smaller than Initial Pump Scope for an instruction fetch",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope OR Final Pump Scope(Group) got data from source that was at smaller scope(Chip) Final pump was group pump and initial pump was chip or final and initial pump was gro"
},
- {,
+ {
"EventCode": "0x14052",
"EventName": "PM_INST_GRP_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (Group) ended up larger than Initial Pump Scope (Chip) for an instruction fetch",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope (Chip) Final pump was group pump and initial pump was chip pumpfor an instruction fetch"
},
- {,
+ {
"EventCode": "0x1003a",
"EventName": "PM_INST_IMC_MATCH_CMPL",
"BriefDescription": "IMC Match Count ( Not architected in P8)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x14054",
"EventName": "PM_INST_PUMP_CPRED",
"BriefDescription": "Pump prediction correct. Counts across all types of pumps for an instruction fetch",
"PublicDescription": "Pump prediction correct. Counts across all types of pumpsfor an instruction fetch"
},
- {,
+ {
"EventCode": "0x44052",
"EventName": "PM_INST_PUMP_MPRED",
"BriefDescription": "Pump misprediction. Counts across all types of pumps for an instruction fetch",
"PublicDescription": "Pump Mis prediction Counts across all types of pumpsfor an instruction fetch"
},
- {,
+ {
"EventCode": "0x34050",
"EventName": "PM_INST_SYS_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was system pump (prediction=correct) for an instruction fetch",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was system pump for an instruction fetch"
},
- {,
+ {
"EventCode": "0x34052",
"EventName": "PM_INST_SYS_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (system) mispredicted. Either the original scope was too small (Chip/Group) or the original scope was System and it should have been smaller. Counts for an instruction fetch",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope(Chip/Group) OR Final Pump Scope(system) got data from source that was at smaller scope(Chip/group) Final pump was system pump and initial pump was chip or group or"
},
- {,
+ {
"EventCode": "0x44050",
"EventName": "PM_INST_SYS_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (system) ended up larger than Initial Pump Scope (Chip/Group) for an instruction fetch",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope (Chip or Group) for an instruction fetch"
},
- {,
+ {
"EventCode": "0x45048",
"EventName": "PM_IPTEG_FROM_DL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x35048",
"EventName": "PM_IPTEG_FROM_DL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3504c",
"EventName": "PM_IPTEG_FROM_DL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on a different Node or Group (Distant) due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4504c",
"EventName": "PM_IPTEG_FROM_DMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group (Distant) due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x15042",
"EventName": "PM_IPTEG_FROM_L2",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1504e",
"EventName": "PM_IPTEG_FROM_L2MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a localtion other than the local core's L2 due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x25040",
"EventName": "PM_IPTEG_FROM_L2_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 hit without dispatch conflicts on Mepf state. due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x15040",
"EventName": "PM_IPTEG_FROM_L2_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 without conflict due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x45042",
"EventName": "PM_IPTEG_FROM_L3",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4504e",
"EventName": "PM_IPTEG_FROM_L3MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a localtion other than the local core's L3 due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x35042",
"EventName": "PM_IPTEG_FROM_L3_DISP_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 with dispatch conflict due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x25042",
"EventName": "PM_IPTEG_FROM_L3_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without dispatch conflicts hit on Mepf state. due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x15044",
"EventName": "PM_IPTEG_FROM_L3_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without conflict due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1504c",
"EventName": "PM_IPTEG_FROM_LL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's L4 cache due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x25048",
"EventName": "PM_IPTEG_FROM_LMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's Memory due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2504c",
"EventName": "PM_IPTEG_FROM_MEMORY",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a memory location including L4 from local remote or distant due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4504a",
"EventName": "PM_IPTEG_FROM_OFF_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x15048",
"EventName": "PM_IPTEG_FROM_ON_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on the same chip due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x25046",
"EventName": "PM_IPTEG_FROM_RL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1504a",
"EventName": "PM_IPTEG_FROM_RL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2504a",
"EventName": "PM_IPTEG_FROM_RL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on the same Node or Group ( Remote) due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3504a",
"EventName": "PM_IPTEG_FROM_RMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group ( Remote) due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xd096",
"EventName": "PM_ISLB_MISS",
"BriefDescription": "I SLB Miss",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x400fc",
"EventName": "PM_ITLB_MISS",
"BriefDescription": "ITLB Reloaded (always zero on POWER6)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x200fd",
"EventName": "PM_L1_ICACHE_MISS",
"BriefDescription": "Demand iCache Miss",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40012",
"EventName": "PM_L1_ICACHE_RELOADED_ALL",
"BriefDescription": "Counts all Icache reloads includes demand, prefetchm prefetch turned into demand and demand turned into prefetch",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30068",
"EventName": "PM_L1_ICACHE_RELOADED_PREF",
"BriefDescription": "Counts all Icache prefetch reloads ( includes demand turned into prefetch)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x300f4",
"EventName": "PM_THRD_CONC_RUN_INST",
"BriefDescription": "PPC Instructions Finished when both threads in run_cycles",
"PublicDescription": "Concurrent Run Instructions"
},
- {,
+ {
"EventCode": "0x30060",
"EventName": "PM_TM_TRANS_RUN_INST",
"BriefDescription": "Instructions completed in transactional state",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4e014",
"EventName": "PM_TM_TX_PASS_RUN_INST",
"BriefDescription": "run instructions spent in successful transactions",
"PublicDescription": ""
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/powerpc/power8/marked.json b/tools/perf/pmu-events/arch/powerpc/power8/marked.json
index dcdcede3c3fe..94dc58b83b7e 100644
--- a/tools/perf/pmu-events/arch/powerpc/power8/marked.json
+++ b/tools/perf/pmu-events/arch/powerpc/power8/marked.json
@@ -1,794 +1,794 @@
[
- {,
+ {
"EventCode": "0x3515e",
"EventName": "PM_MRK_BACK_BR_CMPL",
"BriefDescription": "Marked branch instruction completed with a target address less than current instruction address",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2013a",
"EventName": "PM_MRK_BRU_FIN",
"BriefDescription": "bru marked instr finish",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1016e",
"EventName": "PM_MRK_BR_CMPL",
"BriefDescription": "Branch Instruction completed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x301e4",
"EventName": "PM_MRK_BR_MPRED_CMPL",
"BriefDescription": "Marked Branch Mispredicted",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x101e2",
"EventName": "PM_MRK_BR_TAKEN_CMPL",
"BriefDescription": "Marked Branch Taken completed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d148",
"EventName": "PM_MRK_DATA_FROM_DL2L3_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d128",
"EventName": "PM_MRK_DATA_FROM_DL2L3_MOD_CYC",
"BriefDescription": "Duration in cycles to reload with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3d148",
"EventName": "PM_MRK_DATA_FROM_DL2L3_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c128",
"EventName": "PM_MRK_DATA_FROM_DL2L3_SHR_CYC",
"BriefDescription": "Duration in cycles to reload with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3d14c",
"EventName": "PM_MRK_DATA_FROM_DL4",
"BriefDescription": "The processor's data cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c12c",
"EventName": "PM_MRK_DATA_FROM_DL4_CYC",
"BriefDescription": "Duration in cycles to reload from another chip's L4 on a different Node or Group (Distant) due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d14c",
"EventName": "PM_MRK_DATA_FROM_DMEM",
"BriefDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group (Distant) due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d12c",
"EventName": "PM_MRK_DATA_FROM_DMEM_CYC",
"BriefDescription": "Duration in cycles to reload from another chip's memory on the same Node or Group (Distant) due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d142",
"EventName": "PM_MRK_DATA_FROM_L2",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d14e",
"EventName": "PM_MRK_DATA_FROM_L2MISS",
"BriefDescription": "Data cache reload L2 miss",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c12e",
"EventName": "PM_MRK_DATA_FROM_L2MISS_CYC",
"BriefDescription": "Duration in cycles to reload from a localtion other than the local core's L2 due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c122",
"EventName": "PM_MRK_DATA_FROM_L2_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L2 due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3d140",
"EventName": "PM_MRK_DATA_FROM_L2_DISP_CONFLICT_LDHITST",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 with load hit store conflict due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c120",
"EventName": "PM_MRK_DATA_FROM_L2_DISP_CONFLICT_LDHITST_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L2 with load hit store conflict due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d140",
"EventName": "PM_MRK_DATA_FROM_L2_DISP_CONFLICT_OTHER",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 with dispatch conflict due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d120",
"EventName": "PM_MRK_DATA_FROM_L2_DISP_CONFLICT_OTHER_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L2 with dispatch conflict due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d140",
"EventName": "PM_MRK_DATA_FROM_L2_MEPF",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state. due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d120",
"EventName": "PM_MRK_DATA_FROM_L2_MEPF_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L2 hit without dispatch conflicts on Mepf state. due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d140",
"EventName": "PM_MRK_DATA_FROM_L2_NO_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 without conflict due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c120",
"EventName": "PM_MRK_DATA_FROM_L2_NO_CONFLICT_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L2 without conflict due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d142",
"EventName": "PM_MRK_DATA_FROM_L3",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x201e4",
"EventName": "PM_MRK_DATA_FROM_L3MISS",
"BriefDescription": "The processor's data cache was reloaded from a localtion other than the local core's L3 due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d12e",
"EventName": "PM_MRK_DATA_FROM_L3MISS_CYC",
"BriefDescription": "Duration in cycles to reload from a localtion other than the local core's L3 due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d122",
"EventName": "PM_MRK_DATA_FROM_L3_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L3 due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3d142",
"EventName": "PM_MRK_DATA_FROM_L3_DISP_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 with dispatch conflict due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c122",
"EventName": "PM_MRK_DATA_FROM_L3_DISP_CONFLICT_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L3 with dispatch conflict due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d142",
"EventName": "PM_MRK_DATA_FROM_L3_MEPF",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state. due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d122",
"EventName": "PM_MRK_DATA_FROM_L3_MEPF_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L3 without dispatch conflicts hit on Mepf state. due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d144",
"EventName": "PM_MRK_DATA_FROM_L3_NO_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 without conflict due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c124",
"EventName": "PM_MRK_DATA_FROM_L3_NO_CONFLICT_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L3 without conflict due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d14c",
"EventName": "PM_MRK_DATA_FROM_LL4",
"BriefDescription": "The processor's data cache was reloaded from the local chip's L4 cache due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c12c",
"EventName": "PM_MRK_DATA_FROM_LL4_CYC",
"BriefDescription": "Duration in cycles to reload from the local chip's L4 cache due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d148",
"EventName": "PM_MRK_DATA_FROM_LMEM",
"BriefDescription": "The processor's data cache was reloaded from the local chip's Memory due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d128",
"EventName": "PM_MRK_DATA_FROM_LMEM_CYC",
"BriefDescription": "Duration in cycles to reload from the local chip's Memory due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d14c",
"EventName": "PM_MRK_DATA_FROM_MEMORY",
"BriefDescription": "The processor's data cache was reloaded from a memory location including L4 from local remote or distant due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d12c",
"EventName": "PM_MRK_DATA_FROM_MEMORY_CYC",
"BriefDescription": "Duration in cycles to reload from a memory location including L4 from local remote or distant due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d14a",
"EventName": "PM_MRK_DATA_FROM_OFF_CHIP_CACHE",
"BriefDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d12a",
"EventName": "PM_MRK_DATA_FROM_OFF_CHIP_CACHE_CYC",
"BriefDescription": "Duration in cycles to reload either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d148",
"EventName": "PM_MRK_DATA_FROM_ON_CHIP_CACHE",
"BriefDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c128",
"EventName": "PM_MRK_DATA_FROM_ON_CHIP_CACHE_CYC",
"BriefDescription": "Duration in cycles to reload either shared or modified data from another core's L2/L3 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d146",
"EventName": "PM_MRK_DATA_FROM_RL2L3_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d126",
"EventName": "PM_MRK_DATA_FROM_RL2L3_MOD_CYC",
"BriefDescription": "Duration in cycles to reload with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d14a",
"EventName": "PM_MRK_DATA_FROM_RL2L3_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c12a",
"EventName": "PM_MRK_DATA_FROM_RL2L3_SHR_CYC",
"BriefDescription": "Duration in cycles to reload with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d14a",
"EventName": "PM_MRK_DATA_FROM_RL4",
"BriefDescription": "The processor's data cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d12a",
"EventName": "PM_MRK_DATA_FROM_RL4_CYC",
"BriefDescription": "Duration in cycles to reload from another chip's L4 on the same Node or Group ( Remote) due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3d14a",
"EventName": "PM_MRK_DATA_FROM_RMEM",
"BriefDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c12a",
"EventName": "PM_MRK_DATA_FROM_RMEM_CYC",
"BriefDescription": "Duration in cycles to reload from another chip's memory on the same Node or Group ( Remote) due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40118",
"EventName": "PM_MRK_DCACHE_RELOAD_INTV",
"BriefDescription": "Combined Intervention event",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x301e6",
"EventName": "PM_MRK_DERAT_MISS",
"BriefDescription": "Erat Miss (TLB Access) All page sizes",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d154",
"EventName": "PM_MRK_DERAT_MISS_16G",
"BriefDescription": "Marked Data ERAT Miss (Data TLB Access) page size 16G",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3d154",
"EventName": "PM_MRK_DERAT_MISS_16M",
"BriefDescription": "Marked Data ERAT Miss (Data TLB Access) page size 16M",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d156",
"EventName": "PM_MRK_DERAT_MISS_4K",
"BriefDescription": "Marked Data ERAT Miss (Data TLB Access) page size 4K",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d154",
"EventName": "PM_MRK_DERAT_MISS_64K",
"BriefDescription": "Marked Data ERAT Miss (Data TLB Access) page size 64K",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20132",
"EventName": "PM_MRK_DFU_FIN",
"BriefDescription": "Decimal Unit marked Instruction Finish",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4f148",
"EventName": "PM_MRK_DPTEG_FROM_DL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3f148",
"EventName": "PM_MRK_DPTEG_FROM_DL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3f14c",
"EventName": "PM_MRK_DPTEG_FROM_DL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on a different Node or Group (Distant) due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4f14c",
"EventName": "PM_MRK_DPTEG_FROM_DMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group (Distant) due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1f142",
"EventName": "PM_MRK_DPTEG_FROM_L2",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1f14e",
"EventName": "PM_MRK_DPTEG_FROM_L2MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a localtion other than the local core's L2 due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2f140",
"EventName": "PM_MRK_DPTEG_FROM_L2_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 hit without dispatch conflicts on Mepf state. due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1f140",
"EventName": "PM_MRK_DPTEG_FROM_L2_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 without conflict due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4f142",
"EventName": "PM_MRK_DPTEG_FROM_L3",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4f14e",
"EventName": "PM_MRK_DPTEG_FROM_L3MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a localtion other than the local core's L3 due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3f142",
"EventName": "PM_MRK_DPTEG_FROM_L3_DISP_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 with dispatch conflict due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2f142",
"EventName": "PM_MRK_DPTEG_FROM_L3_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without dispatch conflicts hit on Mepf state. due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1f144",
"EventName": "PM_MRK_DPTEG_FROM_L3_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without conflict due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1f14c",
"EventName": "PM_MRK_DPTEG_FROM_LL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's L4 cache due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2f148",
"EventName": "PM_MRK_DPTEG_FROM_LMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's Memory due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2f14c",
"EventName": "PM_MRK_DPTEG_FROM_MEMORY",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a memory location including L4 from local remote or distant due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4f14a",
"EventName": "PM_MRK_DPTEG_FROM_OFF_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1f148",
"EventName": "PM_MRK_DPTEG_FROM_ON_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on the same chip due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2f146",
"EventName": "PM_MRK_DPTEG_FROM_RL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1f14a",
"EventName": "PM_MRK_DPTEG_FROM_RL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2f14a",
"EventName": "PM_MRK_DPTEG_FROM_RL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on the same Node or Group ( Remote) due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3f14a",
"EventName": "PM_MRK_DPTEG_FROM_RMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group ( Remote) due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x401e4",
"EventName": "PM_MRK_DTLB_MISS",
"BriefDescription": "Marked dtlb miss",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d158",
"EventName": "PM_MRK_DTLB_MISS_16G",
"BriefDescription": "Marked Data TLB Miss page size 16G",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d156",
"EventName": "PM_MRK_DTLB_MISS_16M",
"BriefDescription": "Marked Data TLB Miss page size 16M",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d156",
"EventName": "PM_MRK_DTLB_MISS_4K",
"BriefDescription": "Marked Data TLB Miss page size 4k",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3d156",
"EventName": "PM_MRK_DTLB_MISS_64K",
"BriefDescription": "Marked Data TLB Miss page size 64K",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40154",
"EventName": "PM_MRK_FAB_RSP_BKILL",
"BriefDescription": "Marked store had to do a bkill",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2f150",
"EventName": "PM_MRK_FAB_RSP_BKILL_CYC",
"BriefDescription": "cycles L2 RC took for a bkill",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3015e",
"EventName": "PM_MRK_FAB_RSP_CLAIM_RTY",
"BriefDescription": "Sampled store did a rwitm and got a rty",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30154",
"EventName": "PM_MRK_FAB_RSP_DCLAIM",
"BriefDescription": "Marked store had to do a dclaim",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2f152",
"EventName": "PM_MRK_FAB_RSP_DCLAIM_CYC",
"BriefDescription": "cycles L2 RC took for a dclaim",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4015e",
"EventName": "PM_MRK_FAB_RSP_RD_RTY",
"BriefDescription": "Sampled L2 reads retry count",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1015e",
"EventName": "PM_MRK_FAB_RSP_RD_T_INTV",
"BriefDescription": "Sampled Read got a T intervention",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4f150",
"EventName": "PM_MRK_FAB_RSP_RWITM_CYC",
"BriefDescription": "cycles L2 RC took for a rwitm",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2015e",
"EventName": "PM_MRK_FAB_RSP_RWITM_RTY",
"BriefDescription": "Sampled store did a rwitm and got a rty",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20134",
"EventName": "PM_MRK_FXU_FIN",
"BriefDescription": "fxu marked instr finish",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x401e0",
"EventName": "PM_MRK_INST_CMPL",
"BriefDescription": "marked instruction completed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20130",
"EventName": "PM_MRK_INST_DECODED",
"BriefDescription": "marked instruction decoded",
"PublicDescription": "marked instruction decoded. Name from ISU?"
},
- {,
+ {
"EventCode": "0x101e0",
"EventName": "PM_MRK_INST_DISP",
"BriefDescription": "The thread has dispatched a randomly sampled marked instruction",
"PublicDescription": "Marked Instruction dispatched"
},
- {,
+ {
"EventCode": "0x30130",
"EventName": "PM_MRK_INST_FIN",
"BriefDescription": "marked instruction finished",
"PublicDescription": "marked instr finish any unit"
},
- {,
+ {
"EventCode": "0x401e6",
"EventName": "PM_MRK_INST_FROM_L3MISS",
"BriefDescription": "Marked instruction was reloaded from a location beyond the local chiplet",
"PublicDescription": "n/a"
},
- {,
+ {
"EventCode": "0x10132",
"EventName": "PM_MRK_INST_ISSUED",
"BriefDescription": "Marked instruction issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40134",
"EventName": "PM_MRK_INST_TIMEO",
"BriefDescription": "marked Instruction finish timeout (instruction lost)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x101e4",
"EventName": "PM_MRK_L1_ICACHE_MISS",
"BriefDescription": "sampled Instruction suffered an icache Miss",
"PublicDescription": "Marked L1 Icache Miss"
},
- {,
+ {
"EventCode": "0x101ea",
"EventName": "PM_MRK_L1_RELOAD_VALID",
"BriefDescription": "Marked demand reload",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20114",
"EventName": "PM_MRK_L2_RC_DISP",
"BriefDescription": "Marked Instruction RC dispatched in L2",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3012a",
"EventName": "PM_MRK_L2_RC_DONE",
"BriefDescription": "Marked RC done",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40116",
"EventName": "PM_MRK_LARX_FIN",
"BriefDescription": "Larx finished",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1013e",
"EventName": "PM_MRK_LD_MISS_EXPOSED_CYC",
"BriefDescription": "Marked Load exposed Miss cycles",
"PublicDescription": "Marked Load exposed Miss (use edge detect to count #)"
},
- {,
+ {
"EventCode": "0x201e2",
"EventName": "PM_MRK_LD_MISS_L1",
"BriefDescription": "Marked DL1 Demand Miss counted at exec time",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4013e",
"EventName": "PM_MRK_LD_MISS_L1_CYC",
"BriefDescription": "Marked ld latency",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40132",
"EventName": "PM_MRK_LSU_FIN",
"BriefDescription": "lsu marked instr finish",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20112",
"EventName": "PM_MRK_NTF_FIN",
"BriefDescription": "Marked next to finish instruction finished",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d15e",
"EventName": "PM_MRK_RUN_CYC",
"BriefDescription": "Marked run cycles",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3013e",
"EventName": "PM_MRK_STALL_CMPLU_CYC",
"BriefDescription": "Marked Group completion Stall",
"PublicDescription": "Marked Group Completion Stall cycles (use edge detect to count #)"
},
- {,
+ {
"EventCode": "0x3e158",
"EventName": "PM_MRK_STCX_FAIL",
"BriefDescription": "marked stcx failed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10134",
"EventName": "PM_MRK_ST_CMPL",
"BriefDescription": "marked store completed and sent to nest",
"PublicDescription": "Marked store completed"
},
- {,
+ {
"EventCode": "0x30134",
"EventName": "PM_MRK_ST_CMPL_INT",
"BriefDescription": "marked store finished with intervention",
"PublicDescription": "marked store complete (data home) with intervention"
},
- {,
+ {
"EventCode": "0x3f150",
"EventName": "PM_MRK_ST_DRAIN_TO_L2DISP_CYC",
"BriefDescription": "cycles to drain st from core to L2",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3012c",
"EventName": "PM_MRK_ST_FWD",
"BriefDescription": "Marked st forwards",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1f150",
"EventName": "PM_MRK_ST_L2DISP_TO_CMPL_CYC",
"BriefDescription": "cycles from L2 rc disp to l2 rc completion",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20138",
"EventName": "PM_MRK_ST_NEST",
"BriefDescription": "Marked store sent to nest",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30132",
"EventName": "PM_MRK_VSU_FIN",
"BriefDescription": "VSU marked instr finish",
"PublicDescription": "vsu (fpu) marked instr finish"
},
- {,
+ {
"EventCode": "0x3d15e",
"EventName": "PM_MULT_MRK",
"BriefDescription": "mult marked instr",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x15152",
"EventName": "PM_SYNC_MRK_BR_LINK",
"BriefDescription": "Marked Branch and link branch that can cause a synchronous interrupt",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1515c",
"EventName": "PM_SYNC_MRK_BR_MPRED",
"BriefDescription": "Marked Branch mispredict that can cause a synchronous interrupt",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x15156",
"EventName": "PM_SYNC_MRK_FX_DIVIDE",
"BriefDescription": "Marked fixed point divide that can cause a synchronous interrupt",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x15158",
"EventName": "PM_SYNC_MRK_L2HIT",
"BriefDescription": "Marked L2 Hits that can throw a synchronous interrupt",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1515a",
"EventName": "PM_SYNC_MRK_L2MISS",
"BriefDescription": "Marked L2 Miss that can throw a synchronous interrupt",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x15154",
"EventName": "PM_SYNC_MRK_L3MISS",
"BriefDescription": "Marked L3 misses that can throw a synchronous interrupt",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x15150",
"EventName": "PM_SYNC_MRK_PROBE_NOP",
"BriefDescription": "Marked probeNops which can cause synchronous interrupts",
"PublicDescription": ""
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/powerpc/power8/memory.json b/tools/perf/pmu-events/arch/powerpc/power8/memory.json
index 87cdaadba7bd..2ba33420e20d 100644
--- a/tools/perf/pmu-events/arch/powerpc/power8/memory.json
+++ b/tools/perf/pmu-events/arch/powerpc/power8/memory.json
@@ -1,212 +1,212 @@
[
- {,
+ {
"EventCode": "0x10050",
"EventName": "PM_CHIP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was chip pump (prediction=correct) for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was chip pump (prediction=correct) for all data types ( demand load,data,inst prefetch,inst fetch,xlate (I or d)"
},
- {,
+ {
"EventCode": "0x1c050",
"EventName": "PM_DATA_CHIP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was chip pump (prediction=correct) for a demand load",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was chip pump (prediction=correct) for a demand load"
},
- {,
+ {
"EventCode": "0x4c04c",
"EventName": "PM_DATA_FROM_DMEM",
"BriefDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group (Distant) due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group (Distant) due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x2c048",
"EventName": "PM_DATA_FROM_LMEM",
"BriefDescription": "The processor's data cache was reloaded from the local chip's Memory due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from the local chip's Memory due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x2c04c",
"EventName": "PM_DATA_FROM_MEMORY",
"BriefDescription": "The processor's data cache was reloaded from a memory location including L4 from local remote or distant due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from a memory location including L4 from local remote or distant due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x2c04a",
"EventName": "PM_DATA_FROM_RL4",
"BriefDescription": "The processor's data cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x3c04a",
"EventName": "PM_DATA_FROM_RMEM",
"BriefDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to a demand load",
"PublicDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x2c050",
"EventName": "PM_DATA_GRP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was group pump (prediction=correct) for a demand load",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was group pump for a demand load"
},
- {,
+ {
"EventCode": "0x2c052",
"EventName": "PM_DATA_GRP_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (Group) ended up either larger or smaller than Initial Pump Scope for a demand load",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope OR Final Pump Scope(Group) got data from source that was at smaller scope(Chip) Final pump was group pump and initial pump was chip or final and initial pump was gro"
},
- {,
+ {
"EventCode": "0x1c052",
"EventName": "PM_DATA_GRP_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (Group) ended up larger than Initial Pump Scope (Chip) for a demand load",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope (Chip) Final pump was group pump and initial pump was chip pumpfor a demand load"
},
- {,
+ {
"EventCode": "0x1c054",
"EventName": "PM_DATA_PUMP_CPRED",
"BriefDescription": "Pump prediction correct. Counts across all types of pumps for a demand load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c052",
"EventName": "PM_DATA_PUMP_MPRED",
"BriefDescription": "Pump misprediction. Counts across all types of pumps for a demand load",
"PublicDescription": "Pump Mis prediction Counts across all types of pumpsfor a demand load"
},
- {,
+ {
"EventCode": "0x3c050",
"EventName": "PM_DATA_SYS_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was system pump (prediction=correct) for a demand load",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was system pump for a demand load"
},
- {,
+ {
"EventCode": "0x3c052",
"EventName": "PM_DATA_SYS_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (system) mispredicted. Either the original scope was too small (Chip/Group) or the original scope was System and it should have been smaller. Counts for a demand load",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope(Chip/Group) OR Final Pump Scope(system) got data from source that was at smaller scope(Chip/group) Final pump was system pump and initial pump was chip or group or"
},
- {,
+ {
"EventCode": "0x4c050",
"EventName": "PM_DATA_SYS_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (system) ended up larger than Initial Pump Scope (Chip/Group) for a demand load",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope (Chip or Group) for a demand load"
},
- {,
+ {
"EventCode": "0x3e04c",
"EventName": "PM_DPTEG_FROM_DL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on a different Node or Group (Distant) due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4e04c",
"EventName": "PM_DPTEG_FROM_DMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group (Distant) due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3e04a",
"EventName": "PM_DPTEG_FROM_RMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group ( Remote) due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20050",
"EventName": "PM_GRP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope and data sourced across this scope was group pump for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20052",
"EventName": "PM_GRP_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (Group) ended up either larger or smaller than Initial Pump Scope for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope OR Final Pump Scope(Group) got data from source that was at smaller scope(Chip) Final pump was group pump and initial pump was chip or final and initial pump was gro"
},
- {,
+ {
"EventCode": "0x10052",
"EventName": "PM_GRP_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (Group) ended up larger than Initial Pump Scope (Chip) for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope (Chip) Final pump was group pump and initial pump was chip pumpfor all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x18082",
"EventName": "PM_L3_CO_MEPF",
"BriefDescription": "L3 CO of line in Mep state ( includes casthrough",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c058",
"EventName": "PM_MEM_CO",
"BriefDescription": "Memory castouts from this lpar",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10058",
"EventName": "PM_MEM_LOC_THRESH_IFU",
"BriefDescription": "Local Memory above threshold for IFU speculation control",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40056",
"EventName": "PM_MEM_LOC_THRESH_LSU_HIGH",
"BriefDescription": "Local memory above threshold for LSU medium",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1c05e",
"EventName": "PM_MEM_LOC_THRESH_LSU_MED",
"BriefDescription": "Local memory above theshold for data prefetch",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c058",
"EventName": "PM_MEM_PREF",
"BriefDescription": "Memory prefetch for this lpar. Includes L4",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10056",
"EventName": "PM_MEM_READ",
"BriefDescription": "Reads from Memory from this lpar (includes data/inst/xlate/l1prefetch/inst prefetch). Includes L4",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3c05e",
"EventName": "PM_MEM_RWITM",
"BriefDescription": "Memory rwitm for this lpar",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3006e",
"EventName": "PM_NEST_REF_CLK",
"BriefDescription": "Multiply by 4 to obtain the number of PB cycles",
"PublicDescription": "Nest reference clocks"
},
- {,
+ {
"EventCode": "0x10054",
"EventName": "PM_PUMP_CPRED",
"BriefDescription": "Pump prediction correct. Counts across all types of pumps for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Pump prediction correct. Counts across all types of pumpsfor all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x40052",
"EventName": "PM_PUMP_MPRED",
"BriefDescription": "Pump misprediction. Counts across all types of pumps for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Pump Mis prediction Counts across all types of pumpsfor all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x30050",
"EventName": "PM_SYS_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was system pump for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was system pump for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x30052",
"EventName": "PM_SYS_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (system) mispredicted. Either the original scope was too small (Chip/Group) or the original scope was System and it should have been smaller. Counts for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope(Chip/Group) OR Final Pump Scope(system) got data from source that was at smaller scope(Chip/group) Final pump was system pump and initial pump was chip or group or"
},
- {,
+ {
"EventCode": "0x40050",
"EventName": "PM_SYS_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (system) ended up larger than Initial Pump Scope (Chip/Group) for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope (Chip or Group) for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/powerpc/power8/other.json b/tools/perf/pmu-events/arch/powerpc/power8/other.json
index b2a3df07fbc4..f4e760cab111 100644
--- a/tools/perf/pmu-events/arch/powerpc/power8/other.json
+++ b/tools/perf/pmu-events/arch/powerpc/power8/other.json
@@ -1,3446 +1,3446 @@
[
- {,
+ {
"EventCode": "0x1f05e",
"EventName": "PM_1LPAR_CYC",
"BriefDescription": "Number of cycles in single lpar mode. All threads in the core are assigned to the same lpar",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2006e",
"EventName": "PM_2LPAR_CYC",
"BriefDescription": "Cycles in 2-lpar mode. Threads 0-3 belong to Lpar0 and threads 4-7 belong to Lpar1",
"PublicDescription": "Number of cycles in 2 lpar mode"
},
- {,
+ {
"EventCode": "0x4e05e",
"EventName": "PM_4LPAR_CYC",
"BriefDescription": "Number of cycles in 4 LPAR mode. Threads 0-1 belong to lpar0, threads 2-3 belong to lpar1, threads 4-5 belong to lpar2, and threads 6-7 belong to lpar3",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x610050",
"EventName": "PM_ALL_CHIP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was chip pump (prediction=correct) for all data types (demand load,data prefetch,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was chip pump (prediction=correct) for all data types ( demand load,data,inst prefetch,inst fetch,xlate (I or d)"
},
- {,
+ {
"EventCode": "0x520050",
"EventName": "PM_ALL_GRP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope and data sourced across this scope was group pump for all data types (demand load,data prefetch,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was group pump for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x620052",
"EventName": "PM_ALL_GRP_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (Group) ended up either larger or smaller than Initial Pump Scope for all data types (demand load,data prefetch,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope OR Final Pump Scope(Group) got data from source that was at smaller scope(Chip) Final pump was group pump and initial pump was chip or final and initial pump was gro"
},
- {,
+ {
"EventCode": "0x610052",
"EventName": "PM_ALL_GRP_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (Group) ended up larger than Initial Pump Scope (Chip) for all data types (demand load,data prefetch,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope (Chip) Final pump was group pump and initial pump was chip pumpfor all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x610054",
"EventName": "PM_ALL_PUMP_CPRED",
"BriefDescription": "Pump prediction correct. Counts across all types of pumps for all data types (demand load,data prefetch,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Pump prediction correct. Counts across all types of pumpsfor all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x640052",
"EventName": "PM_ALL_PUMP_MPRED",
"BriefDescription": "Pump misprediction. Counts across all types of pumps for all data types (demand load,data prefetch,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Pump Mis prediction Counts across all types of pumpsfor all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x630050",
"EventName": "PM_ALL_SYS_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was system pump for all data types (demand load,data prefetch,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was system pump for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x630052",
"EventName": "PM_ALL_SYS_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (system) mispredicted. Either the original scope was too small (Chip/Group) or the original scope was System and it should have been smaller. Counts for all data types (demand load,data prefetch,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope(Chip/Group) OR Final Pump Scope(system) got data from source that was at smaller scope(Chip/group) Final pump was system pump and initial pump was chip or group or"
},
- {,
+ {
"EventCode": "0x640050",
"EventName": "PM_ALL_SYS_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (system) ended up larger than Initial Pump Scope (Chip/Group) for all data types (demand load,data prefetch,inst prefetch,inst fetch,xlate)",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope (Chip or Group) for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x4082",
"EventName": "PM_BANK_CONFLICT",
"BriefDescription": "Read blocked due to interleave conflict. The ifar logic will detect an interleave conflict and kill the data that was read that cycle",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x5086",
"EventName": "PM_BR_BC_8",
"BriefDescription": "Pairable BC+8 branch that has not been converted to a Resolve Finished in the BRU pipeline",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x5084",
"EventName": "PM_BR_BC_8_CONV",
"BriefDescription": "Pairable BC+8 branch that was converted to a Resolve Finished in the BRU pipeline",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40ac",
"EventName": "PM_BR_MPRED_CCACHE",
"BriefDescription": "Conditional Branch Completed that was Mispredicted due to the Count Cache Target Prediction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40b8",
"EventName": "PM_BR_MPRED_CR",
"BriefDescription": "Conditional Branch Completed that was Mispredicted due to the BHT Direction Prediction (taken/not taken)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40ae",
"EventName": "PM_BR_MPRED_LSTACK",
"BriefDescription": "Conditional Branch Completed that was Mispredicted due to the Link Stack Target Prediction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40ba",
"EventName": "PM_BR_MPRED_TA",
"BriefDescription": "Conditional Branch Completed that was Mispredicted due to the Target Address Prediction from the Count Cache or Link Stack. Only XL-form branches that resolved Taken set this event",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10138",
"EventName": "PM_BR_MRK_2PATH",
"BriefDescription": "marked two path branch",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x409c",
"EventName": "PM_BR_PRED_BR0",
"BriefDescription": "Conditional Branch Completed on BR0 (1st branch in group) in which the HW predicted the Direction or Target",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x409e",
"EventName": "PM_BR_PRED_BR1",
"BriefDescription": "Conditional Branch Completed on BR1 (2nd branch in group) in which the HW predicted the Direction or Target. Note: BR1 can only be used in Single Thread Mode. In all of the SMT modes, only one branch can complete, thus BR1 is unused",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x489c",
"EventName": "PM_BR_PRED_BR_CMPL",
"BriefDescription": "Completion Time Event. This event can also be calculated from the direct bus as follows: if_pc_br0_br_pred(0) OR if_pc_br0_br_pred(1)",
"PublicDescription": "IFU"
},
- {,
+ {
"EventCode": "0x40a4",
"EventName": "PM_BR_PRED_CCACHE_BR0",
"BriefDescription": "Conditional Branch Completed on BR0 that used the Count Cache for Target Prediction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40a6",
"EventName": "PM_BR_PRED_CCACHE_BR1",
"BriefDescription": "Conditional Branch Completed on BR1 that used the Count Cache for Target Prediction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x48a4",
"EventName": "PM_BR_PRED_CCACHE_CMPL",
"BriefDescription": "Completion Time Event. This event can also be calculated from the direct bus as follows: if_pc_br0_br_pred(0) AND if_pc_br0_pred_type",
"PublicDescription": "IFU"
},
- {,
+ {
"EventCode": "0x40b0",
"EventName": "PM_BR_PRED_CR_BR0",
"BriefDescription": "Conditional Branch Completed on BR0 that had its direction predicted. I-form branches do not set this event. In addition, B-form branches which do not use the BHT do not set this event - these are branches with BO-field set to 'always taken' and branches",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40b2",
"EventName": "PM_BR_PRED_CR_BR1",
"BriefDescription": "Conditional Branch Completed on BR1 that had its direction predicted. I-form branches do not set this event. In addition, B-form branches which do not use the BHT do not set this event - these are branches with BO-field set to 'always taken' and branches",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x48b0",
"EventName": "PM_BR_PRED_CR_CMPL",
"BriefDescription": "Completion Time Event. This event can also be calculated from the direct bus as follows: if_pc_br0_br_pred(1)='1'",
"PublicDescription": "IFU"
},
- {,
+ {
"EventCode": "0x40a8",
"EventName": "PM_BR_PRED_LSTACK_BR0",
"BriefDescription": "Conditional Branch Completed on BR0 that used the Link Stack for Target Prediction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40aa",
"EventName": "PM_BR_PRED_LSTACK_BR1",
"BriefDescription": "Conditional Branch Completed on BR1 that used the Link Stack for Target Prediction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x48a8",
"EventName": "PM_BR_PRED_LSTACK_CMPL",
"BriefDescription": "Completion Time Event. This event can also be calculated from the direct bus as follows: if_pc_br0_br_pred(0) AND (not if_pc_br0_pred_type)",
"PublicDescription": "IFU"
},
- {,
+ {
"EventCode": "0x40b4",
"EventName": "PM_BR_PRED_TA_BR0",
"BriefDescription": "Conditional Branch Completed on BR0 that had its target address predicted. Only XL-form branches set this event",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40b6",
"EventName": "PM_BR_PRED_TA_BR1",
"BriefDescription": "Conditional Branch Completed on BR1 that had its target address predicted. Only XL-form branches set this event",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x48b4",
"EventName": "PM_BR_PRED_TA_CMPL",
"BriefDescription": "Completion Time Event. This event can also be calculated from the direct bus as follows: if_pc_br0_br_pred(0)='1'",
"PublicDescription": "IFU"
},
- {,
+ {
"EventCode": "0x40a0",
"EventName": "PM_BR_UNCOND_BR0",
"BriefDescription": "Unconditional Branch Completed on BR0. HW branch prediction was not used for this branch. This can be an I-form branch, a B-form branch with BO-field set to branch always, or a B-form branch which was coverted to a Resolve",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40a2",
"EventName": "PM_BR_UNCOND_BR1",
"BriefDescription": "Unconditional Branch Completed on BR1. HW branch prediction was not used for this branch. This can be an I-form branch, a B-form branch with BO-field set to branch always, or a B-form branch which was coverted to a Resolve",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x48a0",
"EventName": "PM_BR_UNCOND_CMPL",
"BriefDescription": "Completion Time Event. This event can also be calculated from the direct bus as follows: if_pc_br0_br_pred=00 AND if_pc_br0_completed",
"PublicDescription": "IFU"
},
- {,
+ {
"EventCode": "0x3094",
"EventName": "PM_CASTOUT_ISSUED",
"BriefDescription": "Castouts issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3096",
"EventName": "PM_CASTOUT_ISSUED_GPR",
"BriefDescription": "Castouts issued GPR",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2090",
"EventName": "PM_CLB_HELD",
"BriefDescription": "CLB Hold: Any Reason",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d018",
"EventName": "PM_CMPLU_STALL_BRU_CRU",
"BriefDescription": "Completion stall due to IFU",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30026",
"EventName": "PM_CMPLU_STALL_COQ_FULL",
"BriefDescription": "Completion stall due to CO q full",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30038",
"EventName": "PM_CMPLU_STALL_FLUSH",
"BriefDescription": "completion stall due to flush by own thread",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30028",
"EventName": "PM_CMPLU_STALL_MEM_ECC_DELAY",
"BriefDescription": "Completion stall due to mem ECC delay",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e01c",
"EventName": "PM_CMPLU_STALL_NO_NTF",
"BriefDescription": "Completion stall due to nop",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e01e",
"EventName": "PM_CMPLU_STALL_NTCG_FLUSH",
"BriefDescription": "Completion stall due to ntcg flush",
"PublicDescription": "Completion stall due to reject (load hit store)"
},
- {,
+ {
"EventCode": "0x4c010",
"EventName": "PM_CMPLU_STALL_REJECT",
"BriefDescription": "Completion stall due to LSU reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c01a",
"EventName": "PM_CMPLU_STALL_REJECT_LHS",
"BriefDescription": "Completion stall due to reject (load hit store)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c014",
"EventName": "PM_CMPLU_STALL_REJ_LMQ_FULL",
"BriefDescription": "Completion stall due to LSU reject LMQ full",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d010",
"EventName": "PM_CMPLU_STALL_SCALAR",
"BriefDescription": "Completion stall due to VSU scalar instruction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d010",
"EventName": "PM_CMPLU_STALL_SCALAR_LONG",
"BriefDescription": "Completion stall due to VSU scalar long latency instruction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c014",
"EventName": "PM_CMPLU_STALL_STORE",
"BriefDescription": "Completion stall by stores this includes store agen finishes in pipe LS0/LS1 and store data finishes in LS2/LS3",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d014",
"EventName": "PM_CMPLU_STALL_VECTOR",
"BriefDescription": "Completion stall due to VSU vector instruction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d012",
"EventName": "PM_CMPLU_STALL_VECTOR_LONG",
"BriefDescription": "Completion stall due to VSU vector long instruction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d012",
"EventName": "PM_CMPLU_STALL_VSU",
"BriefDescription": "Completion stall due to VSU instruction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x16083",
"EventName": "PM_CO0_ALLOC",
"BriefDescription": "CO mach 0 Busy. Used by PMU to sample ave RC livetime(mach0 used as sample point)",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0x16082",
"EventName": "PM_CO0_BUSY",
"BriefDescription": "CO mach 0 Busy. Used by PMU to sample ave RC livetime(mach0 used as sample point)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3608a",
"EventName": "PM_CO_USAGE",
"BriefDescription": "Continuous 16 cycle(2to1) window where this signals rotates thru sampling each L2 CO machine busy. PMU uses this wave to then do 16 cyc count to sample total number of machs running",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40066",
"EventName": "PM_CRU_FIN",
"BriefDescription": "IFU Finished a (non-branch) instruction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x61c050",
"EventName": "PM_DATA_ALL_CHIP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was chip pump (prediction=correct) for either demand loads or data prefetch",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was chip pump (prediction=correct) for a demand load"
},
- {,
+ {
"EventCode": "0x64c048",
"EventName": "PM_DATA_ALL_FROM_DL2L3_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x63c048",
"EventName": "PM_DATA_ALL_FROM_DL2L3_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x63c04c",
"EventName": "PM_DATA_ALL_FROM_DL4",
"BriefDescription": "The processor's data cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x64c04c",
"EventName": "PM_DATA_ALL_FROM_DMEM",
"BriefDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group (Distant) due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group (Distant) due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x61c042",
"EventName": "PM_DATA_ALL_FROM_L2",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from local core's L2 due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x64c046",
"EventName": "PM_DATA_ALL_FROM_L21_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L2 on the same chip due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L2 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x63c046",
"EventName": "PM_DATA_ALL_FROM_L21_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L2 on the same chip due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L2 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x61c04e",
"EventName": "PM_DATA_ALL_FROM_L2MISS_MOD",
"BriefDescription": "The processor's data cache was reloaded from a localtion other than the local core's L2 due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from a localtion other than the local core's L2 due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x63c040",
"EventName": "PM_DATA_ALL_FROM_L2_DISP_CONFLICT_LDHITST",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 with load hit store conflict due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from local core's L2 with load hit store conflict due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x64c040",
"EventName": "PM_DATA_ALL_FROM_L2_DISP_CONFLICT_OTHER",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 with dispatch conflict due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from local core's L2 with dispatch conflict due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x62c040",
"EventName": "PM_DATA_ALL_FROM_L2_MEPF",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x61c040",
"EventName": "PM_DATA_ALL_FROM_L2_NO_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 without conflict due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from local core's L2 without conflict due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x64c042",
"EventName": "PM_DATA_ALL_FROM_L3",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from local core's L3 due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x64c044",
"EventName": "PM_DATA_ALL_FROM_L31_ECO_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x63c044",
"EventName": "PM_DATA_ALL_FROM_L31_ECO_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x62c044",
"EventName": "PM_DATA_ALL_FROM_L31_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L3 on the same chip due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L3 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x61c046",
"EventName": "PM_DATA_ALL_FROM_L31_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L3 on the same chip due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L3 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x64c04e",
"EventName": "PM_DATA_ALL_FROM_L3MISS_MOD",
"BriefDescription": "The processor's data cache was reloaded from a localtion other than the local core's L3 due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from a localtion other than the local core's L3 due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x63c042",
"EventName": "PM_DATA_ALL_FROM_L3_DISP_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 with dispatch conflict due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from local core's L3 with dispatch conflict due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x62c042",
"EventName": "PM_DATA_ALL_FROM_L3_MEPF",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x61c044",
"EventName": "PM_DATA_ALL_FROM_L3_NO_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 without conflict due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from local core's L3 without conflict due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x61c04c",
"EventName": "PM_DATA_ALL_FROM_LL4",
"BriefDescription": "The processor's data cache was reloaded from the local chip's L4 cache due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from the local chip's L4 cache due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x62c048",
"EventName": "PM_DATA_ALL_FROM_LMEM",
"BriefDescription": "The processor's data cache was reloaded from the local chip's Memory due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from the local chip's Memory due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x62c04c",
"EventName": "PM_DATA_ALL_FROM_MEMORY",
"BriefDescription": "The processor's data cache was reloaded from a memory location including L4 from local remote or distant due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from a memory location including L4 from local remote or distant due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x64c04a",
"EventName": "PM_DATA_ALL_FROM_OFF_CHIP_CACHE",
"BriefDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x61c048",
"EventName": "PM_DATA_ALL_FROM_ON_CHIP_CACHE",
"BriefDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x62c046",
"EventName": "PM_DATA_ALL_FROM_RL2L3_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x61c04a",
"EventName": "PM_DATA_ALL_FROM_RL2L3_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x62c04a",
"EventName": "PM_DATA_ALL_FROM_RL4",
"BriefDescription": "The processor's data cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x63c04a",
"EventName": "PM_DATA_ALL_FROM_RMEM",
"BriefDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to either demand loads or data prefetch",
"PublicDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x62c050",
"EventName": "PM_DATA_ALL_GRP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was group pump (prediction=correct) for either demand loads or data prefetch",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was group pump for a demand load"
},
- {,
+ {
"EventCode": "0x62c052",
"EventName": "PM_DATA_ALL_GRP_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (Group) ended up either larger or smaller than Initial Pump Scope for either demand loads or data prefetch",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope OR Final Pump Scope(Group) got data from source that was at smaller scope(Chip) Final pump was group pump and initial pump was chip or final and initial pump was gro"
},
- {,
+ {
"EventCode": "0x61c052",
"EventName": "PM_DATA_ALL_GRP_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (Group) ended up larger than Initial Pump Scope (Chip) for either demand loads or data prefetch",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope (Chip) Final pump was group pump and initial pump was chip pumpfor a demand load"
},
- {,
+ {
"EventCode": "0x61c054",
"EventName": "PM_DATA_ALL_PUMP_CPRED",
"BriefDescription": "Pump prediction correct. Counts across all types of pumps for either demand loads or data prefetch",
"PublicDescription": "Pump prediction correct. Counts across all types of pumps for a demand load"
},
- {,
+ {
"EventCode": "0x64c052",
"EventName": "PM_DATA_ALL_PUMP_MPRED",
"BriefDescription": "Pump misprediction. Counts across all types of pumps for either demand loads or data prefetch",
"PublicDescription": "Pump Mis prediction Counts across all types of pumpsfor a demand load"
},
- {,
+ {
"EventCode": "0x63c050",
"EventName": "PM_DATA_ALL_SYS_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was system pump (prediction=correct) for either demand loads or data prefetch",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was system pump for a demand load"
},
- {,
+ {
"EventCode": "0x63c052",
"EventName": "PM_DATA_ALL_SYS_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (system) mispredicted. Either the original scope was too small (Chip/Group) or the original scope was System and it should have been smaller. Counts for either demand loads or data prefetch",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope(Chip/Group) OR Final Pump Scope(system) got data from source that was at smaller scope(Chip/group) Final pump was system pump and initial pump was chip or group or"
},
- {,
+ {
"EventCode": "0x64c050",
"EventName": "PM_DATA_ALL_SYS_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (system) ended up larger than Initial Pump Scope (Chip/Group) for either demand loads or data prefetch",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope (Chip or Group) for a demand load"
},
- {,
+ {
"EventCode": "0x4c046",
"EventName": "PM_DATA_FROM_L21_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L2 on the same chip due to a demand load",
"PublicDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L2 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x3c046",
"EventName": "PM_DATA_FROM_L21_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L2 on the same chip due to a demand load",
"PublicDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L2 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x4c044",
"EventName": "PM_DATA_FROM_L31_ECO_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to a demand load",
"PublicDescription": "The processor's data cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x3c044",
"EventName": "PM_DATA_FROM_L31_ECO_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to a demand load",
"PublicDescription": "The processor's data cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x2c044",
"EventName": "PM_DATA_FROM_L31_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L3 on the same chip due to a demand load",
"PublicDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L3 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x1c046",
"EventName": "PM_DATA_FROM_L31_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L3 on the same chip due to a demand load",
"PublicDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L3 on the same chip due to either only demand loads or demand loads plus prefetches if MMCR1[16] is 1"
},
- {,
+ {
"EventCode": "0x400fe",
"EventName": "PM_DATA_FROM_MEM",
"BriefDescription": "The processor's data cache was reloaded from a memory location including L4 from local remote or distant due to a demand load",
"PublicDescription": "Data cache reload from memory (including L4)"
},
- {,
+ {
"EventCode": "0xe0bc",
"EventName": "PM_DC_COLLISIONS",
"BriefDescription": "DATA Cache collisions",
"PublicDescription": "DATA Cache collisions42"
},
- {,
+ {
"EventCode": "0x1e050",
"EventName": "PM_DC_PREF_STREAM_ALLOC",
"BriefDescription": "Stream marked valid. The stream could have been allocated through the hardware prefetch mechanism or through software. This is combined ls0 and ls1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e050",
"EventName": "PM_DC_PREF_STREAM_CONF",
"BriefDescription": "A demand load referenced a line in an active prefetch stream. The stream could have been allocated through the hardware prefetch mechanism or through software. Combine up + down",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4e050",
"EventName": "PM_DC_PREF_STREAM_FUZZY_CONF",
"BriefDescription": "A demand load referenced a line in an active fuzzy prefetch stream. The stream could have been allocated through the hardware prefetch mechanism or through software.Fuzzy stream confirm (out of order effects, or pf cant keep up)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3e050",
"EventName": "PM_DC_PREF_STREAM_STRIDED_CONF",
"BriefDescription": "A demand load referenced a line in an active strided prefetch stream. The stream could have been allocated through the hardware prefetch mechanism or through software",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0ba",
"EventName": "PM_DFU",
"BriefDescription": "Finish DFU (all finish)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0be",
"EventName": "PM_DFU_DCFFIX",
"BriefDescription": "Convert from fixed opcode finish (dcffix,dcffixq)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0bc",
"EventName": "PM_DFU_DENBCD",
"BriefDescription": "BCD->DPD opcode finish (denbcd, denbcdq)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0b8",
"EventName": "PM_DFU_MC",
"BriefDescription": "Finish DFU multicycle",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2092",
"EventName": "PM_DISP_CLB_HELD_BAL",
"BriefDescription": "Dispatch/CLB Hold: Balance",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2094",
"EventName": "PM_DISP_CLB_HELD_RES",
"BriefDescription": "Dispatch/CLB Hold: Resource",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20a8",
"EventName": "PM_DISP_CLB_HELD_SB",
"BriefDescription": "Dispatch/CLB Hold: Scoreboard",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2098",
"EventName": "PM_DISP_CLB_HELD_SYNC",
"BriefDescription": "Dispatch/CLB Hold: Sync type instruction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2096",
"EventName": "PM_DISP_CLB_HELD_TLBIE",
"BriefDescription": "Dispatch Hold: Due to TLBIE",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20006",
"EventName": "PM_DISP_HELD_IQ_FULL",
"BriefDescription": "Dispatch held due to Issue q full",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1002a",
"EventName": "PM_DISP_HELD_MAP_FULL",
"BriefDescription": "Dispatch for this thread was held because the Mappers were full",
"PublicDescription": "Dispatch held due to Mapper full"
},
- {,
+ {
"EventCode": "0x30018",
"EventName": "PM_DISP_HELD_SRQ_FULL",
"BriefDescription": "Dispatch held due SRQ no room",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30a6",
"EventName": "PM_DISP_HOLD_GCT_FULL",
"BriefDescription": "Dispatch Hold Due to no space in the GCT",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30008",
"EventName": "PM_DISP_WT",
"BriefDescription": "Dispatched Starved",
"PublicDescription": "Dispatched Starved (not held, nothing to dispatch)"
},
- {,
+ {
"EventCode": "0x4e046",
"EventName": "PM_DPTEG_FROM_L21_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L2 on the same chip due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3e046",
"EventName": "PM_DPTEG_FROM_L21_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L2 on the same chip due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3e040",
"EventName": "PM_DPTEG_FROM_L2_DISP_CONFLICT_LDHITST",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 with load hit store conflict due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4e040",
"EventName": "PM_DPTEG_FROM_L2_DISP_CONFLICT_OTHER",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 with dispatch conflict due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4e044",
"EventName": "PM_DPTEG_FROM_L31_ECO_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's ECO L3 on the same chip due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3e044",
"EventName": "PM_DPTEG_FROM_L31_ECO_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's ECO L3 on the same chip due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e044",
"EventName": "PM_DPTEG_FROM_L31_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L3 on the same chip due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e046",
"EventName": "PM_DPTEG_FROM_L31_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L3 on the same chip due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50a8",
"EventName": "PM_EAT_FORCE_MISPRED",
"BriefDescription": "XL-form branch was mispredicted due to the predicted target address missing from EAT. The EAT forces a mispredict in this case since there is no predicated target to validate. This is a rare case that may occur when the EAT is full and a branch is issue",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4084",
"EventName": "PM_EAT_FULL_CYC",
"BriefDescription": "Cycles No room in EAT",
"PublicDescription": "Cycles No room in EATSet on bank conflict and case where no ibuffers available"
},
- {,
+ {
"EventCode": "0x2080",
"EventName": "PM_EE_OFF_EXT_INT",
"BriefDescription": "Ee off and external interrupt",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20b4",
"EventName": "PM_FAV_TBEGIN",
"BriefDescription": "Dispatch time Favored tbegin",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x100f4",
"EventName": "PM_FLOP",
"BriefDescription": "Floating Point Operation Finished",
"PublicDescription": "Floating Point Operations Finished"
},
- {,
+ {
"EventCode": "0xa0ae",
"EventName": "PM_FLOP_SUM_SCALAR",
"BriefDescription": "flops summary scalar instructions",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0ac",
"EventName": "PM_FLOP_SUM_VEC",
"BriefDescription": "flops summary vector instructions",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2084",
"EventName": "PM_FLUSH_BR_MPRED",
"BriefDescription": "Flush caused by branch mispredict",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2082",
"EventName": "PM_FLUSH_DISP",
"BriefDescription": "Dispatch flush",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x208c",
"EventName": "PM_FLUSH_DISP_SB",
"BriefDescription": "Dispatch Flush: Scoreboard",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2088",
"EventName": "PM_FLUSH_DISP_SYNC",
"BriefDescription": "Dispatch Flush: Sync",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x208a",
"EventName": "PM_FLUSH_DISP_TLBIE",
"BriefDescription": "Dispatch Flush: TLBIE",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x208e",
"EventName": "PM_FLUSH_LSU",
"BriefDescription": "Flush initiated by LSU",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2086",
"EventName": "PM_FLUSH_PARTIAL",
"BriefDescription": "Partial flush",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0b0",
"EventName": "PM_FPU0_FCONV",
"BriefDescription": "Convert instruction executed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0b8",
"EventName": "PM_FPU0_FEST",
"BriefDescription": "Estimate instruction executed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0b4",
"EventName": "PM_FPU0_FRSP",
"BriefDescription": "Round to single precision instruction executed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0b2",
"EventName": "PM_FPU1_FCONV",
"BriefDescription": "Convert instruction executed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0ba",
"EventName": "PM_FPU1_FEST",
"BriefDescription": "Estimate instruction executed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0b6",
"EventName": "PM_FPU1_FRSP",
"BriefDescription": "Round to single precision instruction executed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50b0",
"EventName": "PM_FUSION_TOC_GRP0_1",
"BriefDescription": "One pair of instructions fused with TOC in Group0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50ae",
"EventName": "PM_FUSION_TOC_GRP0_2",
"BriefDescription": "Two pairs of instructions fused with TOCin Group0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50ac",
"EventName": "PM_FUSION_TOC_GRP0_3",
"BriefDescription": "Three pairs of instructions fused with TOC in Group0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50b2",
"EventName": "PM_FUSION_TOC_GRP1_1",
"BriefDescription": "One pair of instructions fused with TOX in Group1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50b8",
"EventName": "PM_FUSION_VSX_GRP0_1",
"BriefDescription": "One pair of instructions fused with VSX in Group0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50b6",
"EventName": "PM_FUSION_VSX_GRP0_2",
"BriefDescription": "Two pairs of instructions fused with VSX in Group0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50b4",
"EventName": "PM_FUSION_VSX_GRP0_3",
"BriefDescription": "Three pairs of instructions fused with VSX in Group0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50ba",
"EventName": "PM_FUSION_VSX_GRP1_1",
"BriefDescription": "One pair of instructions fused with VSX in Group1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3000e",
"EventName": "PM_FXU0_BUSY_FXU1_IDLE",
"BriefDescription": "fxu0 busy and fxu1 idle",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10004",
"EventName": "PM_FXU0_FIN",
"BriefDescription": "The fixed point unit Unit 0 finished an instruction. Instructions that finish may not necessary complete",
"PublicDescription": "FXU0 Finished"
},
- {,
+ {
"EventCode": "0x4000e",
"EventName": "PM_FXU1_BUSY_FXU0_IDLE",
"BriefDescription": "fxu0 idle and fxu1 busy",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40004",
"EventName": "PM_FXU1_FIN",
"BriefDescription": "FXU1 Finished",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20008",
"EventName": "PM_GCT_EMPTY_CYC",
"BriefDescription": "No itags assigned either thread (GCT Empty)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30a4",
"EventName": "PM_GCT_MERGE",
"BriefDescription": "Group dispatched on a merged GCT empty. GCT entries can be merged only within the same thread",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d01e",
"EventName": "PM_GCT_NOSLOT_BR_MPRED",
"BriefDescription": "Gct empty for this thread due to branch mispred",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d01a",
"EventName": "PM_GCT_NOSLOT_BR_MPRED_ICMISS",
"BriefDescription": "Gct empty for this thread due to Icache Miss and branch mispred",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x100f8",
"EventName": "PM_GCT_NOSLOT_CYC",
"BriefDescription": "No itags assigned",
"PublicDescription": "Pipeline empty (No itags assigned , no GCT slots used)"
},
- {,
+ {
"EventCode": "0x2d01e",
"EventName": "PM_GCT_NOSLOT_DISP_HELD_ISSQ",
"BriefDescription": "Gct empty for this thread due to dispatch hold on this thread due to Issue q full",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d01c",
"EventName": "PM_GCT_NOSLOT_DISP_HELD_MAP",
"BriefDescription": "Gct empty for this thread due to dispatch hold on this thread due to Mapper full",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e010",
"EventName": "PM_GCT_NOSLOT_DISP_HELD_OTHER",
"BriefDescription": "Gct empty for this thread due to dispatch hold on this thread due to sync",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d01c",
"EventName": "PM_GCT_NOSLOT_DISP_HELD_SRQ",
"BriefDescription": "Gct empty for this thread due to dispatch hold on this thread due to SRQ full",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4e010",
"EventName": "PM_GCT_NOSLOT_IC_L3MISS",
"BriefDescription": "Gct empty for this thread due to icach l3 miss",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d01a",
"EventName": "PM_GCT_NOSLOT_IC_MISS",
"BriefDescription": "Gct empty for this thread due to Icache Miss",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20a2",
"EventName": "PM_GCT_UTIL_11_14_ENTRIES",
"BriefDescription": "GCT Utilization 11-14 entries",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20a4",
"EventName": "PM_GCT_UTIL_15_17_ENTRIES",
"BriefDescription": "GCT Utilization 15-17 entries",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20a6",
"EventName": "PM_GCT_UTIL_18_ENTRIES",
"BriefDescription": "GCT Utilization 18+ entries",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x209c",
"EventName": "PM_GCT_UTIL_1_2_ENTRIES",
"BriefDescription": "GCT Utilization 1-2 entries",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x209e",
"EventName": "PM_GCT_UTIL_3_6_ENTRIES",
"BriefDescription": "GCT Utilization 3-6 entries",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20a0",
"EventName": "PM_GCT_UTIL_7_10_ENTRIES",
"BriefDescription": "GCT Utilization 7-10 entries",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1000a",
"EventName": "PM_GRP_BR_MPRED_NONSPEC",
"BriefDescription": "Group experienced non-speculative branch redirect",
"PublicDescription": "Group experienced Non-speculative br mispredicct"
},
- {,
+ {
"EventCode": "0x30004",
"EventName": "PM_GRP_CMPL",
"BriefDescription": "group completed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3000a",
"EventName": "PM_GRP_DISP",
"BriefDescription": "group dispatch",
"PublicDescription": "dispatch_success (Group Dispatched)"
},
- {,
+ {
"EventCode": "0x1000c",
"EventName": "PM_GRP_IC_MISS_NONSPEC",
"BriefDescription": "Group experienced non-speculative I cache miss",
"PublicDescription": "Group experi enced Non-specu lative I cache miss"
},
- {,
+ {
"EventCode": "0x10130",
"EventName": "PM_GRP_MRK",
"BriefDescription": "Instruction Marked",
"PublicDescription": "Instruction marked in idu"
},
- {,
+ {
"EventCode": "0x509c",
"EventName": "PM_GRP_NON_FULL_GROUP",
"BriefDescription": "GROUPs where we did not have 6 non branch instructions in the group(ST mode), in SMT mode 3 non branches",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50a4",
"EventName": "PM_GRP_TERM_2ND_BRANCH",
"BriefDescription": "There were enough instructions in the Ibuffer, but 2nd branch ends group",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50a6",
"EventName": "PM_GRP_TERM_FPU_AFTER_BR",
"BriefDescription": "There were enough instructions in the Ibuffer, but FPU OP IN same group after a branch terminates a group, cant do partial flushes",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x509e",
"EventName": "PM_GRP_TERM_NOINST",
"BriefDescription": "Do not fill every slot in the group, Not enough instructions in the Ibuffer. This includes cases where the group started with enough instructions, but some got knocked out by a cache miss or branch redirect (which would also empty the Ibuffer)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50a0",
"EventName": "PM_GRP_TERM_OTHER",
"BriefDescription": "There were enough instructions in the Ibuffer, but the group terminated early for some other reason, most likely due to a First or Last",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x50a2",
"EventName": "PM_GRP_TERM_SLOT_LIMIT",
"BriefDescription": "There were enough instructions in the Ibuffer, but 3 src RA/RB/RC , 2 way crack caused a group termination",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4086",
"EventName": "PM_IBUF_FULL_CYC",
"BriefDescription": "Cycles No room in ibuff",
"PublicDescription": "Cycles No room in ibufffully qualified transfer (if5 valid)"
},
- {,
+ {
"EventCode": "0x4098",
"EventName": "PM_IC_DEMAND_L2_BHT_REDIRECT",
"BriefDescription": "L2 I cache demand request due to BHT redirect, branch redirect ( 2 bubbles 3 cycles)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x409a",
"EventName": "PM_IC_DEMAND_L2_BR_REDIRECT",
"BriefDescription": "L2 I cache demand request due to branch Mispredict ( 15 cycle path)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4088",
"EventName": "PM_IC_DEMAND_REQ",
"BriefDescription": "Demand Instruction fetch request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x508a",
"EventName": "PM_IC_INVALIDATE",
"BriefDescription": "Ic line invalidated",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4092",
"EventName": "PM_IC_PREF_CANCEL_HIT",
"BriefDescription": "Prefetch Canceled due to icache hit",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4094",
"EventName": "PM_IC_PREF_CANCEL_L2",
"BriefDescription": "L2 Squashed request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4090",
"EventName": "PM_IC_PREF_CANCEL_PAGE",
"BriefDescription": "Prefetch Canceled due to page boundary",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x408a",
"EventName": "PM_IC_PREF_REQ",
"BriefDescription": "Instruction prefetch requests",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x408e",
"EventName": "PM_IC_PREF_WRITE",
"BriefDescription": "Instruction prefetch written into IL1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4096",
"EventName": "PM_IC_RELOAD_PRIVATE",
"BriefDescription": "Reloading line was brought in private for a specific thread. Most lines are brought in shared for all eight thrreads. If RA does not match then invalidates and then brings it shared to other thread. In P7 line brought in private , then line was invalidat",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x5088",
"EventName": "PM_IFU_L2_TOUCH",
"BriefDescription": "L2 touch to update MRU on a line",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x514050",
"EventName": "PM_INST_ALL_CHIP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was chip pump (prediction=correct) for instruction fetches and prefetches",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was chip pump (prediction=correct) for an instruction fetch"
},
- {,
+ {
"EventCode": "0x544048",
"EventName": "PM_INST_ALL_FROM_DL2L3_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x534048",
"EventName": "PM_INST_ALL_FROM_DL2L3_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x53404c",
"EventName": "PM_INST_ALL_FROM_DL4",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x54404c",
"EventName": "PM_INST_ALL_FROM_DMEM",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's memory on the same Node or Group (Distant) due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from another chip's memory on the same Node or Group (Distant) due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x514042",
"EventName": "PM_INST_ALL_FROM_L2",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L2 due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x544046",
"EventName": "PM_INST_ALL_FROM_L21_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's L2 on the same chip due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's L2 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x534046",
"EventName": "PM_INST_ALL_FROM_L21_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's L2 on the same chip due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's L2 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x51404e",
"EventName": "PM_INST_ALL_FROM_L2MISS",
"BriefDescription": "The processor's Instruction cache was reloaded from a localtion other than the local core's L2 due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from a localtion other than the local core's L2 due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x534040",
"EventName": "PM_INST_ALL_FROM_L2_DISP_CONFLICT_LDHITST",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 with load hit store conflict due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L2 with load hit store conflict due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x544040",
"EventName": "PM_INST_ALL_FROM_L2_DISP_CONFLICT_OTHER",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 with dispatch conflict due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L2 with dispatch conflict due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x524040",
"EventName": "PM_INST_ALL_FROM_L2_MEPF",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state. due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state. due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x514040",
"EventName": "PM_INST_ALL_FROM_L2_NO_CONFLICT",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 without conflict due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L2 without conflict due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x544042",
"EventName": "PM_INST_ALL_FROM_L3",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L3 due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x544044",
"EventName": "PM_INST_ALL_FROM_L31_ECO_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x534044",
"EventName": "PM_INST_ALL_FROM_L31_ECO_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x524044",
"EventName": "PM_INST_ALL_FROM_L31_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's L3 on the same chip due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's L3 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x514046",
"EventName": "PM_INST_ALL_FROM_L31_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's L3 on the same chip due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's L3 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x54404e",
"EventName": "PM_INST_ALL_FROM_L3MISS_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded from a localtion other than the local core's L3 due to a instruction fetch",
"PublicDescription": "The processor's Instruction cache was reloaded from a localtion other than the local core's L3 due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x534042",
"EventName": "PM_INST_ALL_FROM_L3_DISP_CONFLICT",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 with dispatch conflict due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L3 with dispatch conflict due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x524042",
"EventName": "PM_INST_ALL_FROM_L3_MEPF",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state. due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state. due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x514044",
"EventName": "PM_INST_ALL_FROM_L3_NO_CONFLICT",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 without conflict due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from local core's L3 without conflict due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x51404c",
"EventName": "PM_INST_ALL_FROM_LL4",
"BriefDescription": "The processor's Instruction cache was reloaded from the local chip's L4 cache due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from the local chip's L4 cache due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x524048",
"EventName": "PM_INST_ALL_FROM_LMEM",
"BriefDescription": "The processor's Instruction cache was reloaded from the local chip's Memory due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from the local chip's Memory due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x52404c",
"EventName": "PM_INST_ALL_FROM_MEMORY",
"BriefDescription": "The processor's Instruction cache was reloaded from a memory location including L4 from local remote or distant due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from a memory location including L4 from local remote or distant due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x54404a",
"EventName": "PM_INST_ALL_FROM_OFF_CHIP_CACHE",
"BriefDescription": "The processor's Instruction cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x514048",
"EventName": "PM_INST_ALL_FROM_ON_CHIP_CACHE",
"BriefDescription": "The processor's Instruction cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x524046",
"EventName": "PM_INST_ALL_FROM_RL2L3_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x51404a",
"EventName": "PM_INST_ALL_FROM_RL2L3_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x52404a",
"EventName": "PM_INST_ALL_FROM_RL4",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x53404a",
"EventName": "PM_INST_ALL_FROM_RMEM",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to instruction fetches and prefetches",
"PublicDescription": "The processor's Instruction cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x524050",
"EventName": "PM_INST_ALL_GRP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was group pump (prediction=correct) for instruction fetches and prefetches",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was group pump for an instruction fetch"
},
- {,
+ {
"EventCode": "0x524052",
"EventName": "PM_INST_ALL_GRP_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (Group) ended up either larger or smaller than Initial Pump Scope for instruction fetches and prefetches",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope OR Final Pump Scope(Group) got data from source that was at smaller scope(Chip) Final pump was group pump and initial pump was chip or final and initial pump was gro"
},
- {,
+ {
"EventCode": "0x514052",
"EventName": "PM_INST_ALL_GRP_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (Group) ended up larger than Initial Pump Scope (Chip) for instruction fetches and prefetches",
"PublicDescription": "Final Pump Scope(Group) to get data sourced, ended up larger than Initial Pump Scope (Chip) Final pump was group pump and initial pump was chip pumpfor an instruction fetch"
},
- {,
+ {
"EventCode": "0x514054",
"EventName": "PM_INST_ALL_PUMP_CPRED",
"BriefDescription": "Pump prediction correct. Counts across all types of pumps for instruction fetches and prefetches",
"PublicDescription": "Pump prediction correct. Counts across all types of pumpsfor an instruction fetch"
},
- {,
+ {
"EventCode": "0x544052",
"EventName": "PM_INST_ALL_PUMP_MPRED",
"BriefDescription": "Pump misprediction. Counts across all types of pumps for instruction fetches and prefetches",
"PublicDescription": "Pump Mis prediction Counts across all types of pumpsfor an instruction fetch"
},
- {,
+ {
"EventCode": "0x534050",
"EventName": "PM_INST_ALL_SYS_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was system pump (prediction=correct) for instruction fetches and prefetches",
"PublicDescription": "Initial and Final Pump Scope and data sourced across this scope was system pump for an instruction fetch"
},
- {,
+ {
"EventCode": "0x534052",
"EventName": "PM_INST_ALL_SYS_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (system) mispredicted. Either the original scope was too small (Chip/Group) or the original scope was System and it should have been smaller. Counts for instruction fetches and prefetches",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope(Chip/Group) OR Final Pump Scope(system) got data from source that was at smaller scope(Chip/group) Final pump was system pump and initial pump was chip or group or"
},
- {,
+ {
"EventCode": "0x544050",
"EventName": "PM_INST_ALL_SYS_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (system) ended up larger than Initial Pump Scope (Chip/Group) for instruction fetches and prefetches",
"PublicDescription": "Final Pump Scope(system) to get data sourced, ended up larger than Initial Pump Scope (Chip or Group) for an instruction fetch"
},
- {,
+ {
"EventCode": "0x4080",
"EventName": "PM_INST_FROM_L1",
"BriefDescription": "Instruction fetches from L1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x44046",
"EventName": "PM_INST_FROM_L21_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's L2 on the same chip due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's L2 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x34046",
"EventName": "PM_INST_FROM_L21_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's L2 on the same chip due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's L2 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x44044",
"EventName": "PM_INST_FROM_L31_ECO_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x34044",
"EventName": "PM_INST_FROM_L31_ECO_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x24044",
"EventName": "PM_INST_FROM_L31_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's L3 on the same chip due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's L3 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x14046",
"EventName": "PM_INST_FROM_L31_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's L3 on the same chip due to an instruction fetch (not prefetch)",
"PublicDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's L3 on the same chip due to either an instruction fetch or instruction fetch plus prefetch if MMCR1[17] is 1"
},
- {,
+ {
"EventCode": "0x30016",
"EventName": "PM_INST_IMC_MATCH_DISP",
"BriefDescription": "Matched Instructions Dispatched",
"PublicDescription": "IMC Matches dispatched"
},
- {,
+ {
"EventCode": "0x30014",
"EventName": "PM_IOPS_DISP",
"BriefDescription": "Internal Operations dispatched",
"PublicDescription": "IOPS dispatched"
},
- {,
+ {
"EventCode": "0x45046",
"EventName": "PM_IPTEG_FROM_L21_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L2 on the same chip due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x35046",
"EventName": "PM_IPTEG_FROM_L21_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L2 on the same chip due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x35040",
"EventName": "PM_IPTEG_FROM_L2_DISP_CONFLICT_LDHITST",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 with load hit store conflict due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x45040",
"EventName": "PM_IPTEG_FROM_L2_DISP_CONFLICT_OTHER",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 with dispatch conflict due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x45044",
"EventName": "PM_IPTEG_FROM_L31_ECO_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's ECO L3 on the same chip due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x35044",
"EventName": "PM_IPTEG_FROM_L31_ECO_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's ECO L3 on the same chip due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x25044",
"EventName": "PM_IPTEG_FROM_L31_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L3 on the same chip due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x15046",
"EventName": "PM_IPTEG_FROM_L31_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L3 on the same chip due to a instruction side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4608e",
"EventName": "PM_ISIDE_L2MEMACC",
"BriefDescription": "valid when first beat of data comes in for an i-side fetch where data came from mem(or L4)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30ac",
"EventName": "PM_ISU_REF_FX0",
"BriefDescription": "FX0 ISU reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30ae",
"EventName": "PM_ISU_REF_FX1",
"BriefDescription": "FX1 ISU reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x38ac",
"EventName": "PM_ISU_REF_FXU",
"BriefDescription": "FXU ISU reject from either pipe",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30b0",
"EventName": "PM_ISU_REF_LS0",
"BriefDescription": "LS0 ISU reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30b2",
"EventName": "PM_ISU_REF_LS1",
"BriefDescription": "LS1 ISU reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30b4",
"EventName": "PM_ISU_REF_LS2",
"BriefDescription": "LS2 ISU reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30b6",
"EventName": "PM_ISU_REF_LS3",
"BriefDescription": "LS3 ISU reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x309c",
"EventName": "PM_ISU_REJECTS_ALL",
"BriefDescription": "All isu rejects could be more than 1 per cycle",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30a2",
"EventName": "PM_ISU_REJECT_RES_NA",
"BriefDescription": "ISU reject due to resource not available",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x309e",
"EventName": "PM_ISU_REJECT_SAR_BYPASS",
"BriefDescription": "Reject because of SAR bypass",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30a0",
"EventName": "PM_ISU_REJECT_SRC_NA",
"BriefDescription": "ISU reject due to source not available",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30a8",
"EventName": "PM_ISU_REJ_VS0",
"BriefDescription": "VS0 ISU reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30aa",
"EventName": "PM_ISU_REJ_VS1",
"BriefDescription": "VS1 ISU reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x38a8",
"EventName": "PM_ISU_REJ_VSU",
"BriefDescription": "VSU ISU reject from either pipe",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30b8",
"EventName": "PM_ISYNC",
"BriefDescription": "Isync count per thread",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x200301ea",
"EventName": "PM_L1MISS_LAT_EXC_1024",
"BriefDescription": "L1 misses that took longer than 1024 cyles to resolve (miss to reload)",
"PublicDescription": "Reload latency exceeded 1024 cyc"
},
- {,
+ {
"EventCode": "0x200401ec",
"EventName": "PM_L1MISS_LAT_EXC_2048",
"BriefDescription": "L1 misses that took longer than 2048 cyles to resolve (miss to reload)",
"PublicDescription": "Reload latency exceeded 2048 cyc"
},
- {,
+ {
"EventCode": "0x200101e8",
"EventName": "PM_L1MISS_LAT_EXC_256",
"BriefDescription": "L1 misses that took longer than 256 cyles to resolve (miss to reload)",
"PublicDescription": "Reload latency exceeded 256 cyc"
},
- {,
+ {
"EventCode": "0x200201e6",
"EventName": "PM_L1MISS_LAT_EXC_32",
"BriefDescription": "L1 misses that took longer than 32 cyles to resolve (miss to reload)",
"PublicDescription": "Reload latency exceeded 32 cyc"
},
- {,
+ {
"EventCode": "0x26086",
"EventName": "PM_L1PF_L2MEMACC",
"BriefDescription": "valid when first beat of data comes in for an L1pref where data came from mem(or L4)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x408c",
"EventName": "PM_L1_DEMAND_WRITE",
"BriefDescription": "Instruction Demand sectors wriittent into IL1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x27084",
"EventName": "PM_L2_CHIP_PUMP",
"BriefDescription": "RC requests that were local on chip pump attempts",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x27086",
"EventName": "PM_L2_GROUP_PUMP",
"BriefDescription": "RC requests that were on Node Pump attempts",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3708a",
"EventName": "PM_L2_RTY_ST",
"BriefDescription": "RC retries on PB for any store from core",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x17080",
"EventName": "PM_L2_ST",
"BriefDescription": "All successful D-side store dispatches for this thread",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x17082",
"EventName": "PM_L2_ST_MISS",
"BriefDescription": "All successful D-side store dispatches for this thread that were L2 Miss",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e05e",
"EventName": "PM_L2_TM_REQ_ABORT",
"BriefDescription": "TM abort",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3e05c",
"EventName": "PM_L2_TM_ST_ABORT_SISTER",
"BriefDescription": "TM marked store abort",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x819082",
"EventName": "PM_L3_CI_USAGE",
"BriefDescription": "rotating sample of 16 CI or CO actives",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x83908b",
"EventName": "PM_L3_CO0_ALLOC",
"BriefDescription": "lifetime, sample of CO machine 0 valid",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0x83908a",
"EventName": "PM_L3_CO0_BUSY",
"BriefDescription": "lifetime, sample of CO machine 0 valid",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x28086",
"EventName": "PM_L3_CO_L31",
"BriefDescription": "L3 CO to L3.1 OR of port 0 and 1 ( lossy)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x28084",
"EventName": "PM_L3_CO_MEM",
"BriefDescription": "L3 CO to memory OR of port 0 and 1 ( lossy)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e052",
"EventName": "PM_L3_LD_PREF",
"BriefDescription": "L3 Load Prefetches",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x84908d",
"EventName": "PM_L3_PF0_ALLOC",
"BriefDescription": "lifetime, sample of PF machine 0 valid",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0x84908c",
"EventName": "PM_L3_PF0_BUSY",
"BriefDescription": "lifetime, sample of PF machine 0 valid",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x18080",
"EventName": "PM_L3_PF_MISS_L3",
"BriefDescription": "L3 Prefetch missed in L3",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3808a",
"EventName": "PM_L3_PF_OFF_CHIP_CACHE",
"BriefDescription": "L3 Prefetch from Off chip cache",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4808e",
"EventName": "PM_L3_PF_OFF_CHIP_MEM",
"BriefDescription": "L3 Prefetch from Off chip memory",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x38088",
"EventName": "PM_L3_PF_ON_CHIP_CACHE",
"BriefDescription": "L3 Prefetch from On chip cache",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4808c",
"EventName": "PM_L3_PF_ON_CHIP_MEM",
"BriefDescription": "L3 Prefetch from On chip memory",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x829084",
"EventName": "PM_L3_PF_USAGE",
"BriefDescription": "rotating sample of 32 PF actives",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4e052",
"EventName": "PM_L3_PREF_ALL",
"BriefDescription": "Total HW L3 prefetches(Load+store)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x84908f",
"EventName": "PM_L3_RD0_ALLOC",
"BriefDescription": "lifetime, sample of RD machine 0 valid",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0x84908e",
"EventName": "PM_L3_RD0_BUSY",
"BriefDescription": "lifetime, sample of RD machine 0 valid",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x829086",
"EventName": "PM_L3_RD_USAGE",
"BriefDescription": "rotating sample of 16 RD actives",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x839089",
"EventName": "PM_L3_SN0_ALLOC",
"BriefDescription": "lifetime, sample of snooper machine 0 valid",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0x839088",
"EventName": "PM_L3_SN0_BUSY",
"BriefDescription": "lifetime, sample of snooper machine 0 valid",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x819080",
"EventName": "PM_L3_SN_USAGE",
"BriefDescription": "rotating sample of 8 snoop valids",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e052",
"EventName": "PM_L3_ST_PREF",
"BriefDescription": "L3 store Prefetches",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3e052",
"EventName": "PM_L3_SW_PREF",
"BriefDescription": "Data stream touchto L3",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x18081",
"EventName": "PM_L3_WI0_ALLOC",
"BriefDescription": "lifetime, sample of Write Inject machine 0 valid",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0xc080",
"EventName": "PM_LD_REF_L1_LSU0",
"BriefDescription": "LS0 L1 D cache load references counted at finish, gated by reject",
"PublicDescription": "LS0 L1 D cache load references counted at finish, gated by rejectLSU0 L1 D cache load references"
},
- {,
+ {
"EventCode": "0xc082",
"EventName": "PM_LD_REF_L1_LSU1",
"BriefDescription": "LS1 L1 D cache load references counted at finish, gated by reject",
"PublicDescription": "LS1 L1 D cache load references counted at finish, gated by rejectLSU1 L1 D cache load references"
},
- {,
+ {
"EventCode": "0xc094",
"EventName": "PM_LD_REF_L1_LSU2",
"BriefDescription": "LS2 L1 D cache load references counted at finish, gated by reject",
"PublicDescription": "LS2 L1 D cache load references counted at finish, gated by reject42"
},
- {,
+ {
"EventCode": "0xc096",
"EventName": "PM_LD_REF_L1_LSU3",
"BriefDescription": "LS3 L1 D cache load references counted at finish, gated by reject",
"PublicDescription": "LS3 L1 D cache load references counted at finish, gated by reject42"
},
- {,
+ {
"EventCode": "0x509a",
"EventName": "PM_LINK_STACK_INVALID_PTR",
"BriefDescription": "A flush were LS ptr is invalid, results in a pop , A lot of interrupts between push and pops",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x5098",
"EventName": "PM_LINK_STACK_WRONG_ADD_PRED",
"BriefDescription": "Link stack predicts wrong address, because of link stack design limitation",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xe080",
"EventName": "PM_LS0_ERAT_MISS_PREF",
"BriefDescription": "LS0 Erat miss due to prefetch",
"PublicDescription": "LS0 Erat miss due to prefetch42"
},
- {,
+ {
"EventCode": "0xd0b8",
"EventName": "PM_LS0_L1_PREF",
"BriefDescription": "LS0 L1 cache data prefetches",
"PublicDescription": "LS0 L1 cache data prefetches42"
},
- {,
+ {
"EventCode": "0xc098",
"EventName": "PM_LS0_L1_SW_PREF",
"BriefDescription": "Software L1 Prefetches, including SW Transient Prefetches",
"PublicDescription": "Software L1 Prefetches, including SW Transient Prefetches42"
},
- {,
+ {
"EventCode": "0xe082",
"EventName": "PM_LS1_ERAT_MISS_PREF",
"BriefDescription": "LS1 Erat miss due to prefetch",
"PublicDescription": "LS1 Erat miss due to prefetch42"
},
- {,
+ {
"EventCode": "0xd0ba",
"EventName": "PM_LS1_L1_PREF",
"BriefDescription": "LS1 L1 cache data prefetches",
"PublicDescription": "LS1 L1 cache data prefetches42"
},
- {,
+ {
"EventCode": "0xc09a",
"EventName": "PM_LS1_L1_SW_PREF",
"BriefDescription": "Software L1 Prefetches, including SW Transient Prefetches",
"PublicDescription": "Software L1 Prefetches, including SW Transient Prefetches42"
},
- {,
+ {
"EventCode": "0xc0b0",
"EventName": "PM_LSU0_FLUSH_LRQ",
"BriefDescription": "LS0 Flush: LRQ",
"PublicDescription": "LS0 Flush: LRQLSU0 LRQ flushes"
},
- {,
+ {
"EventCode": "0xc0b8",
"EventName": "PM_LSU0_FLUSH_SRQ",
"BriefDescription": "LS0 Flush: SRQ",
"PublicDescription": "LS0 Flush: SRQLSU0 SRQ lhs flushes"
},
- {,
+ {
"EventCode": "0xc0a4",
"EventName": "PM_LSU0_FLUSH_ULD",
"BriefDescription": "LS0 Flush: Unaligned Load",
"PublicDescription": "LS0 Flush: Unaligned LoadLSU0 unaligned load flushes"
},
- {,
+ {
"EventCode": "0xc0ac",
"EventName": "PM_LSU0_FLUSH_UST",
"BriefDescription": "LS0 Flush: Unaligned Store",
"PublicDescription": "LS0 Flush: Unaligned StoreLSU0 unaligned store flushes"
},
- {,
+ {
"EventCode": "0xf088",
"EventName": "PM_LSU0_L1_CAM_CANCEL",
"BriefDescription": "ls0 l1 tm cam cancel",
"PublicDescription": "ls0 l1 tm cam cancel42"
},
- {,
+ {
"EventCode": "0x1e056",
"EventName": "PM_LSU0_LARX_FIN",
"BriefDescription": "Larx finished in LSU pipe0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xd08c",
"EventName": "PM_LSU0_LMQ_LHR_MERGE",
"BriefDescription": "LS0 Load Merged with another cacheline request",
"PublicDescription": "LS0 Load Merged with another cacheline request42"
},
- {,
+ {
"EventCode": "0xc08c",
"EventName": "PM_LSU0_NCLD",
"BriefDescription": "LS0 Non-cachable Loads counted at finish",
"PublicDescription": "LS0 Non-cachable Loads counted at finishLSU0 non-cacheable loads"
},
- {,
+ {
"EventCode": "0xe090",
"EventName": "PM_LSU0_PRIMARY_ERAT_HIT",
"BriefDescription": "Primary ERAT hit",
"PublicDescription": "Primary ERAT hit42"
},
- {,
+ {
"EventCode": "0x1e05a",
"EventName": "PM_LSU0_REJECT",
"BriefDescription": "LSU0 reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xc09c",
"EventName": "PM_LSU0_SRQ_STFWD",
"BriefDescription": "LS0 SRQ forwarded data to a load",
"PublicDescription": "LS0 SRQ forwarded data to a loadLSU0 SRQ store forwarded"
},
- {,
+ {
"EventCode": "0xf084",
"EventName": "PM_LSU0_STORE_REJECT",
"BriefDescription": "ls0 store reject",
"PublicDescription": "ls0 store reject42"
},
- {,
+ {
"EventCode": "0xe0a8",
"EventName": "PM_LSU0_TMA_REQ_L2",
"BriefDescription": "addrs only req to L2 only on the first one,Indication that Load footprint is not expanding",
"PublicDescription": "addrs only req to L2 only on the first one,Indication that Load footprint is not expanding42"
},
- {,
+ {
"EventCode": "0xe098",
"EventName": "PM_LSU0_TM_L1_HIT",
"BriefDescription": "Load tm hit in L1",
"PublicDescription": "Load tm hit in L142"
},
- {,
+ {
"EventCode": "0xe0a0",
"EventName": "PM_LSU0_TM_L1_MISS",
"BriefDescription": "Load tm L1 miss",
"PublicDescription": "Load tm L1 miss42"
},
- {,
+ {
"EventCode": "0xc0b2",
"EventName": "PM_LSU1_FLUSH_LRQ",
"BriefDescription": "LS1 Flush: LRQ",
"PublicDescription": "LS1 Flush: LRQLSU1 LRQ flushes"
},
- {,
+ {
"EventCode": "0xc0ba",
"EventName": "PM_LSU1_FLUSH_SRQ",
"BriefDescription": "LS1 Flush: SRQ",
"PublicDescription": "LS1 Flush: SRQLSU1 SRQ lhs flushes"
},
- {,
+ {
"EventCode": "0xc0a6",
"EventName": "PM_LSU1_FLUSH_ULD",
"BriefDescription": "LS 1 Flush: Unaligned Load",
"PublicDescription": "LS 1 Flush: Unaligned LoadLSU1 unaligned load flushes"
},
- {,
+ {
"EventCode": "0xc0ae",
"EventName": "PM_LSU1_FLUSH_UST",
"BriefDescription": "LS1 Flush: Unaligned Store",
"PublicDescription": "LS1 Flush: Unaligned StoreLSU1 unaligned store flushes"
},
- {,
+ {
"EventCode": "0xf08a",
"EventName": "PM_LSU1_L1_CAM_CANCEL",
"BriefDescription": "ls1 l1 tm cam cancel",
"PublicDescription": "ls1 l1 tm cam cancel42"
},
- {,
+ {
"EventCode": "0x2e056",
"EventName": "PM_LSU1_LARX_FIN",
"BriefDescription": "Larx finished in LSU pipe1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xd08e",
"EventName": "PM_LSU1_LMQ_LHR_MERGE",
"BriefDescription": "LS1 Load Merge with another cacheline request",
"PublicDescription": "LS1 Load Merge with another cacheline request42"
},
- {,
+ {
"EventCode": "0xc08e",
"EventName": "PM_LSU1_NCLD",
"BriefDescription": "LS1 Non-cachable Loads counted at finish",
"PublicDescription": "LS1 Non-cachable Loads counted at finishLSU1 non-cacheable loads"
},
- {,
+ {
"EventCode": "0xe092",
"EventName": "PM_LSU1_PRIMARY_ERAT_HIT",
"BriefDescription": "Primary ERAT hit",
"PublicDescription": "Primary ERAT hit42"
},
- {,
+ {
"EventCode": "0x2e05a",
"EventName": "PM_LSU1_REJECT",
"BriefDescription": "LSU1 reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xc09e",
"EventName": "PM_LSU1_SRQ_STFWD",
"BriefDescription": "LS1 SRQ forwarded data to a load",
"PublicDescription": "LS1 SRQ forwarded data to a loadLSU1 SRQ store forwarded"
},
- {,
+ {
"EventCode": "0xf086",
"EventName": "PM_LSU1_STORE_REJECT",
"BriefDescription": "ls1 store reject",
"PublicDescription": "ls1 store reject42"
},
- {,
+ {
"EventCode": "0xe0aa",
"EventName": "PM_LSU1_TMA_REQ_L2",
"BriefDescription": "addrs only req to L2 only on the first one,Indication that Load footprint is not expanding",
"PublicDescription": "addrs only req to L2 only on the first one,Indication that Load footprint is not expanding42"
},
- {,
+ {
"EventCode": "0xe09a",
"EventName": "PM_LSU1_TM_L1_HIT",
"BriefDescription": "Load tm hit in L1",
"PublicDescription": "Load tm hit in L142"
},
- {,
+ {
"EventCode": "0xe0a2",
"EventName": "PM_LSU1_TM_L1_MISS",
"BriefDescription": "Load tm L1 miss",
"PublicDescription": "Load tm L1 miss42"
},
- {,
+ {
"EventCode": "0xc0b4",
"EventName": "PM_LSU2_FLUSH_LRQ",
"BriefDescription": "LS02Flush: LRQ",
"PublicDescription": "LS02Flush: LRQ42"
},
- {,
+ {
"EventCode": "0xc0bc",
"EventName": "PM_LSU2_FLUSH_SRQ",
"BriefDescription": "LS2 Flush: SRQ",
"PublicDescription": "LS2 Flush: SRQ42"
},
- {,
+ {
"EventCode": "0xc0a8",
"EventName": "PM_LSU2_FLUSH_ULD",
"BriefDescription": "LS3 Flush: Unaligned Load",
"PublicDescription": "LS3 Flush: Unaligned Load42"
},
- {,
+ {
"EventCode": "0xf08c",
"EventName": "PM_LSU2_L1_CAM_CANCEL",
"BriefDescription": "ls2 l1 tm cam cancel",
"PublicDescription": "ls2 l1 tm cam cancel42"
},
- {,
+ {
"EventCode": "0x3e056",
"EventName": "PM_LSU2_LARX_FIN",
"BriefDescription": "Larx finished in LSU pipe2",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xc084",
"EventName": "PM_LSU2_LDF",
"BriefDescription": "LS2 Scalar Loads",
"PublicDescription": "LS2 Scalar Loads42"
},
- {,
+ {
"EventCode": "0xc088",
"EventName": "PM_LSU2_LDX",
"BriefDescription": "LS0 Vector Loads",
"PublicDescription": "LS0 Vector Loads42"
},
- {,
+ {
"EventCode": "0xd090",
"EventName": "PM_LSU2_LMQ_LHR_MERGE",
"BriefDescription": "LS0 Load Merged with another cacheline request",
"PublicDescription": "LS0 Load Merged with another cacheline request42"
},
- {,
+ {
"EventCode": "0xe094",
"EventName": "PM_LSU2_PRIMARY_ERAT_HIT",
"BriefDescription": "Primary ERAT hit",
"PublicDescription": "Primary ERAT hit42"
},
- {,
+ {
"EventCode": "0x3e05a",
"EventName": "PM_LSU2_REJECT",
"BriefDescription": "LSU2 reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xc0a0",
"EventName": "PM_LSU2_SRQ_STFWD",
"BriefDescription": "LS2 SRQ forwarded data to a load",
"PublicDescription": "LS2 SRQ forwarded data to a load42"
},
- {,
+ {
"EventCode": "0xe0ac",
"EventName": "PM_LSU2_TMA_REQ_L2",
"BriefDescription": "addrs only req to L2 only on the first one,Indication that Load footprint is not expanding",
"PublicDescription": "addrs only req to L2 only on the first one,Indication that Load footprint is not expanding42"
},
- {,
+ {
"EventCode": "0xe09c",
"EventName": "PM_LSU2_TM_L1_HIT",
"BriefDescription": "Load tm hit in L1",
"PublicDescription": "Load tm hit in L142"
},
- {,
+ {
"EventCode": "0xe0a4",
"EventName": "PM_LSU2_TM_L1_MISS",
"BriefDescription": "Load tm L1 miss",
"PublicDescription": "Load tm L1 miss42"
},
- {,
+ {
"EventCode": "0xc0b6",
"EventName": "PM_LSU3_FLUSH_LRQ",
"BriefDescription": "LS3 Flush: LRQ",
"PublicDescription": "LS3 Flush: LRQ42"
},
- {,
+ {
"EventCode": "0xc0be",
"EventName": "PM_LSU3_FLUSH_SRQ",
"BriefDescription": "LS13 Flush: SRQ",
"PublicDescription": "LS13 Flush: SRQ42"
},
- {,
+ {
"EventCode": "0xc0aa",
"EventName": "PM_LSU3_FLUSH_ULD",
"BriefDescription": "LS 14Flush: Unaligned Load",
"PublicDescription": "LS 14Flush: Unaligned Load42"
},
- {,
+ {
"EventCode": "0xf08e",
"EventName": "PM_LSU3_L1_CAM_CANCEL",
"BriefDescription": "ls3 l1 tm cam cancel",
"PublicDescription": "ls3 l1 tm cam cancel42"
},
- {,
+ {
"EventCode": "0x4e056",
"EventName": "PM_LSU3_LARX_FIN",
"BriefDescription": "Larx finished in LSU pipe3",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xc086",
"EventName": "PM_LSU3_LDF",
"BriefDescription": "LS3 Scalar Loads",
"PublicDescription": "LS3 Scalar Loads 42"
},
- {,
+ {
"EventCode": "0xc08a",
"EventName": "PM_LSU3_LDX",
"BriefDescription": "LS1 Vector Loads",
"PublicDescription": "LS1 Vector Loads42"
},
- {,
+ {
"EventCode": "0xd092",
"EventName": "PM_LSU3_LMQ_LHR_MERGE",
"BriefDescription": "LS1 Load Merge with another cacheline request",
"PublicDescription": "LS1 Load Merge with another cacheline request42"
},
- {,
+ {
"EventCode": "0xe096",
"EventName": "PM_LSU3_PRIMARY_ERAT_HIT",
"BriefDescription": "Primary ERAT hit",
"PublicDescription": "Primary ERAT hit42"
},
- {,
+ {
"EventCode": "0x4e05a",
"EventName": "PM_LSU3_REJECT",
"BriefDescription": "LSU3 reject",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xc0a2",
"EventName": "PM_LSU3_SRQ_STFWD",
"BriefDescription": "LS3 SRQ forwarded data to a load",
"PublicDescription": "LS3 SRQ forwarded data to a load42"
},
- {,
+ {
"EventCode": "0xe0ae",
"EventName": "PM_LSU3_TMA_REQ_L2",
"BriefDescription": "addrs only req to L2 only on the first one,Indication that Load footprint is not expanding",
"PublicDescription": "addrs only req to L2 only on the first one,Indication that Load footprint is not expanding42"
},
- {,
+ {
"EventCode": "0xe09e",
"EventName": "PM_LSU3_TM_L1_HIT",
"BriefDescription": "Load tm hit in L1",
"PublicDescription": "Load tm hit in L142"
},
- {,
+ {
"EventCode": "0xe0a6",
"EventName": "PM_LSU3_TM_L1_MISS",
"BriefDescription": "Load tm L1 miss",
"PublicDescription": "Load tm L1 miss42"
},
- {,
+ {
"EventCode": "0xe880",
"EventName": "PM_LSU_ERAT_MISS_PREF",
"BriefDescription": "Erat miss due to prefetch, on either pipe",
"PublicDescription": "LSU"
},
- {,
+ {
"EventCode": "0xc8ac",
"EventName": "PM_LSU_FLUSH_UST",
"BriefDescription": "Unaligned Store Flush on either pipe",
"PublicDescription": "LSU"
},
- {,
+ {
"EventCode": "0xd0a4",
"EventName": "PM_LSU_FOUR_TABLEWALK_CYC",
"BriefDescription": "Cycles when four tablewalks pending on this thread",
"PublicDescription": "Cycles when four tablewalks pending on this thread42"
},
- {,
+ {
"EventCode": "0x10066",
"EventName": "PM_LSU_FX_FIN",
"BriefDescription": "LSU Finished a FX operation (up to 2 per cycle",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xd8b8",
"EventName": "PM_LSU_L1_PREF",
"BriefDescription": "hw initiated , include sw streaming forms as well , include sw streams as a separate event",
"PublicDescription": "LSU"
},
- {,
+ {
"EventCode": "0xc898",
"EventName": "PM_LSU_L1_SW_PREF",
"BriefDescription": "Software L1 Prefetches, including SW Transient Prefetches, on both pipes",
"PublicDescription": "LSU"
},
- {,
+ {
"EventCode": "0xc884",
"EventName": "PM_LSU_LDF",
"BriefDescription": "FPU loads only on LS2/LS3 ie LU0/LU1",
"PublicDescription": "LSU"
},
- {,
+ {
"EventCode": "0xc888",
"EventName": "PM_LSU_LDX",
"BriefDescription": "Vector loads can issue only on LS2/LS3",
"PublicDescription": "LSU"
},
- {,
+ {
"EventCode": "0xd0a2",
"EventName": "PM_LSU_LMQ_FULL_CYC",
"BriefDescription": "LMQ full",
"PublicDescription": "LMQ fullCycles LMQ full"
},
- {,
+ {
"EventCode": "0xd0a1",
"EventName": "PM_LSU_LMQ_S0_ALLOC",
"BriefDescription": "Per thread - use edge detect to count allocates On a per thread basis, level signal indicating Slot 0 is valid. By instrumenting a single slot we can calculate service time for that slot. Previous machines required a separate signal indicating the slot was allocated. Because any signal can be routed to any counter in P8, we can count level in one PMC and edge detect in another PMC using the same signal",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0xd0a0",
"EventName": "PM_LSU_LMQ_S0_VALID",
"BriefDescription": "Slot 0 of LMQ valid",
"PublicDescription": "Slot 0 of LMQ validLMQ slot 0 valid"
},
- {,
+ {
"EventCode": "0x3001c",
"EventName": "PM_LSU_LMQ_SRQ_EMPTY_ALL_CYC",
"BriefDescription": "ALL threads lsu empty (lmq and srq empty)",
"PublicDescription": "ALL threads lsu empty (lmq and srq empty). Issue HW016541"
},
- {,
+ {
"EventCode": "0xd09f",
"EventName": "PM_LSU_LRQ_S0_ALLOC",
"BriefDescription": "Per thread - use edge detect to count allocates On a per thread basis, level signal indicating Slot 0 is valid. By instrumenting a single slot we can calculate service time for that slot. Previous machines required a separate signal indicating the slot was allocated. Because any signal can be routed to any counter in P8, we can count level in one PMC and edge detect in another PMC using the same signal",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0xd09e",
"EventName": "PM_LSU_LRQ_S0_VALID",
"BriefDescription": "Slot 0 of LRQ valid",
"PublicDescription": "Slot 0 of LRQ validLRQ slot 0 valid"
},
- {,
+ {
"EventCode": "0xf091",
"EventName": "PM_LSU_LRQ_S43_ALLOC",
"BriefDescription": "LRQ slot 43 was released",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0xf090",
"EventName": "PM_LSU_LRQ_S43_VALID",
"BriefDescription": "LRQ slot 43 was busy",
"PublicDescription": "LRQ slot 43 was busy42"
},
- {,
+ {
"EventCode": "0x30162",
"EventName": "PM_LSU_MRK_DERAT_MISS",
"BriefDescription": "DERAT Reloaded (Miss)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xc88c",
"EventName": "PM_LSU_NCLD",
"BriefDescription": "count at finish so can return only on ls0 or ls1",
"PublicDescription": "LSU"
},
- {,
+ {
"EventCode": "0xc092",
"EventName": "PM_LSU_NCST",
"BriefDescription": "Non-cachable Stores sent to nest",
"PublicDescription": "Non-cachable Stores sent to nest42"
},
- {,
+ {
"EventCode": "0x10064",
"EventName": "PM_LSU_REJECT",
"BriefDescription": "LSU Reject (up to 4 per cycle)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xd082",
"EventName": "PM_LSU_SET_MPRED",
"BriefDescription": "Line already in cache at reload time",
"PublicDescription": "Line already in cache at reload time42"
},
- {,
+ {
"EventCode": "0x40008",
"EventName": "PM_LSU_SRQ_EMPTY_CYC",
"BriefDescription": "ALL threads srq empty",
"PublicDescription": "All threads srq empty"
},
- {,
+ {
"EventCode": "0xd09d",
"EventName": "PM_LSU_SRQ_S0_ALLOC",
"BriefDescription": "Per thread - use edge detect to count allocates On a per thread basis, level signal indicating Slot 0 is valid. By instrumenting a single slot we can calculate service time for that slot. Previous machines required a separate signal indicating the slot was allocated. Because any signal can be routed to any counter in P8, we can count level in one PMC and edge detect in another PMC using the same signal",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0xd09c",
"EventName": "PM_LSU_SRQ_S0_VALID",
"BriefDescription": "Slot 0 of SRQ valid",
"PublicDescription": "Slot 0 of SRQ validSRQ slot 0 valid"
},
- {,
+ {
"EventCode": "0xf093",
"EventName": "PM_LSU_SRQ_S39_ALLOC",
"BriefDescription": "SRQ slot 39 was released",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0xf092",
"EventName": "PM_LSU_SRQ_S39_VALID",
"BriefDescription": "SRQ slot 39 was busy",
"PublicDescription": "SRQ slot 39 was busy42"
},
- {,
+ {
"EventCode": "0xd09b",
"EventName": "PM_LSU_SRQ_SYNC",
"BriefDescription": "A sync in the SRQ ended",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0xd09a",
"EventName": "PM_LSU_SRQ_SYNC_CYC",
"BriefDescription": "A sync is in the SRQ (edge detect to count)",
"PublicDescription": "A sync is in the SRQ (edge detect to count)SRQ sync duration"
},
- {,
+ {
"EventCode": "0xf084",
"EventName": "PM_LSU_STORE_REJECT",
"BriefDescription": "Store reject on either pipe",
"PublicDescription": "LSU"
},
- {,
+ {
"EventCode": "0xd0a6",
"EventName": "PM_LSU_TWO_TABLEWALK_CYC",
"BriefDescription": "Cycles when two tablewalks pending on this thread",
"PublicDescription": "Cycles when two tablewalks pending on this thread42"
},
- {,
+ {
"EventCode": "0x5094",
"EventName": "PM_LWSYNC",
"BriefDescription": "threaded version, IC Misses where we got EA dir hit but no sector valids were on. ICBI took line out",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x209a",
"EventName": "PM_LWSYNC_HELD",
"BriefDescription": "LWSYNC held at dispatch",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3013a",
"EventName": "PM_MRK_CRU_FIN",
"BriefDescription": "IFU non-branch finished",
"PublicDescription": "IFU non-branch marked instruction finished"
},
- {,
+ {
"EventCode": "0x4d146",
"EventName": "PM_MRK_DATA_FROM_L21_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L2 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d126",
"EventName": "PM_MRK_DATA_FROM_L21_MOD_CYC",
"BriefDescription": "Duration in cycles to reload with Modified (M) data from another core's L2 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3d146",
"EventName": "PM_MRK_DATA_FROM_L21_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L2 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c126",
"EventName": "PM_MRK_DATA_FROM_L21_SHR_CYC",
"BriefDescription": "Duration in cycles to reload with Shared (S) data from another core's L2 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d144",
"EventName": "PM_MRK_DATA_FROM_L31_ECO_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d124",
"EventName": "PM_MRK_DATA_FROM_L31_ECO_MOD_CYC",
"BriefDescription": "Duration in cycles to reload with Modified (M) data from another core's ECO L3 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3d144",
"EventName": "PM_MRK_DATA_FROM_L31_ECO_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c124",
"EventName": "PM_MRK_DATA_FROM_L31_ECO_SHR_CYC",
"BriefDescription": "Duration in cycles to reload with Shared (S) data from another core's ECO L3 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d144",
"EventName": "PM_MRK_DATA_FROM_L31_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L3 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d124",
"EventName": "PM_MRK_DATA_FROM_L31_MOD_CYC",
"BriefDescription": "Duration in cycles to reload with Modified (M) data from another core's L3 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d146",
"EventName": "PM_MRK_DATA_FROM_L31_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L3 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c126",
"EventName": "PM_MRK_DATA_FROM_L31_SHR_CYC",
"BriefDescription": "Duration in cycles to reload with Shared (S) data from another core's L3 on the same chip due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x201e0",
"EventName": "PM_MRK_DATA_FROM_MEM",
"BriefDescription": "The processor's data cache was reloaded from a memory location including L4 from local remote or distant due to a marked load",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4f146",
"EventName": "PM_MRK_DPTEG_FROM_L21_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L2 on the same chip due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3f146",
"EventName": "PM_MRK_DPTEG_FROM_L21_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L2 on the same chip due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3f140",
"EventName": "PM_MRK_DPTEG_FROM_L2_DISP_CONFLICT_LDHITST",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 with load hit store conflict due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4f140",
"EventName": "PM_MRK_DPTEG_FROM_L2_DISP_CONFLICT_OTHER",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 with dispatch conflict due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4f144",
"EventName": "PM_MRK_DPTEG_FROM_L31_ECO_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's ECO L3 on the same chip due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3f144",
"EventName": "PM_MRK_DPTEG_FROM_L31_ECO_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's ECO L3 on the same chip due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2f144",
"EventName": "PM_MRK_DPTEG_FROM_L31_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L3 on the same chip due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1f146",
"EventName": "PM_MRK_DPTEG_FROM_L31_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L3 on the same chip due to a marked data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30156",
"EventName": "PM_MRK_FAB_RSP_MATCH",
"BriefDescription": "ttype and cresp matched as specified in MMCR1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4f152",
"EventName": "PM_MRK_FAB_RSP_MATCH_CYC",
"BriefDescription": "cresp/ttype match cycles",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2013c",
"EventName": "PM_MRK_FILT_MATCH",
"BriefDescription": "Marked filter Match",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1013c",
"EventName": "PM_MRK_FIN_STALL_CYC",
"BriefDescription": "Marked instruction Finish Stall cycles (marked finish after NTC) (use edge detect to count )",
"PublicDescription": "Marked instruction Finish Stall cycles (marked finish after NTC) (use edge detect to count #)"
},
- {,
+ {
"EventCode": "0x40130",
"EventName": "PM_MRK_GRP_CMPL",
"BriefDescription": "marked instruction finished (completed)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4013a",
"EventName": "PM_MRK_GRP_IC_MISS",
"BriefDescription": "Marked Group experienced I cache miss",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3013c",
"EventName": "PM_MRK_GRP_NTC",
"BriefDescription": "Marked group ntc cycles",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1013f",
"EventName": "PM_MRK_LD_MISS_EXPOSED",
"BriefDescription": "Marked Load exposed Miss (exposed period ended)",
"PublicDescription": "Marked Load exposed Miss (use edge detect to count #)"
},
- {,
+ {
"EventCode": "0xd180",
"EventName": "PM_MRK_LSU_FLUSH",
"BriefDescription": "Flush: (marked) : All Cases",
"PublicDescription": "Flush: (marked) : All Cases42"
},
- {,
+ {
"EventCode": "0xd188",
"EventName": "PM_MRK_LSU_FLUSH_LRQ",
"BriefDescription": "Flush: (marked) LRQ",
"PublicDescription": "Flush: (marked) LRQMarked LRQ flushes"
},
- {,
+ {
"EventCode": "0xd18a",
"EventName": "PM_MRK_LSU_FLUSH_SRQ",
"BriefDescription": "Flush: (marked) SRQ",
"PublicDescription": "Flush: (marked) SRQMarked SRQ lhs flushes"
},
- {,
+ {
"EventCode": "0xd184",
"EventName": "PM_MRK_LSU_FLUSH_ULD",
"BriefDescription": "Flush: (marked) Unaligned Load",
"PublicDescription": "Flush: (marked) Unaligned LoadMarked unaligned load flushes"
},
- {,
+ {
"EventCode": "0xd186",
"EventName": "PM_MRK_LSU_FLUSH_UST",
"BriefDescription": "Flush: (marked) Unaligned Store",
"PublicDescription": "Flush: (marked) Unaligned StoreMarked unaligned store flushes"
},
- {,
+ {
"EventCode": "0x40164",
"EventName": "PM_MRK_LSU_REJECT",
"BriefDescription": "LSU marked reject (up to 2 per cycle)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30164",
"EventName": "PM_MRK_LSU_REJECT_ERAT_MISS",
"BriefDescription": "LSU marked reject due to ERAT (up to 2 per cycle)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d15a",
"EventName": "PM_MRK_SRC_PREF_TRACK_EFF",
"BriefDescription": "Marked src pref track was effective",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3d15a",
"EventName": "PM_MRK_SRC_PREF_TRACK_INEFF",
"BriefDescription": "Prefetch tracked was ineffective for marked src",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d15c",
"EventName": "PM_MRK_SRC_PREF_TRACK_MOD",
"BriefDescription": "Prefetch tracked was moderate for marked src",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1d15c",
"EventName": "PM_MRK_SRC_PREF_TRACK_MOD_L2",
"BriefDescription": "Marked src Prefetch Tracked was moderate (source L2)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3d15c",
"EventName": "PM_MRK_SRC_PREF_TRACK_MOD_L3",
"BriefDescription": "Prefetch tracked was moderate (L3 hit) for marked src",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1c15a",
"EventName": "PM_MRK_TGT_PREF_TRACK_EFF",
"BriefDescription": "Marked target pref track was effective",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3c15a",
"EventName": "PM_MRK_TGT_PREF_TRACK_INEFF",
"BriefDescription": "Prefetch tracked was ineffective for marked target",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c15c",
"EventName": "PM_MRK_TGT_PREF_TRACK_MOD",
"BriefDescription": "Prefetch tracked was moderate for marked target",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1c15c",
"EventName": "PM_MRK_TGT_PREF_TRACK_MOD_L2",
"BriefDescription": "Marked target Prefetch Tracked was moderate (source L2)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3c15c",
"EventName": "PM_MRK_TGT_PREF_TRACK_MOD_L3",
"BriefDescription": "Prefetch tracked was moderate (L3 hit) for marked target",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20b0",
"EventName": "PM_NESTED_TEND",
"BriefDescription": "Completion time nested tend",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20b6",
"EventName": "PM_NON_FAV_TBEGIN",
"BriefDescription": "Dispatch time non favored tbegin",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2001a",
"EventName": "PM_NTCG_ALL_FIN",
"BriefDescription": "Cycles after all instructions have finished to group completed",
"PublicDescription": "Ccycles after all instructions have finished to group completed"
},
- {,
+ {
"EventCode": "0x20ac",
"EventName": "PM_OUTER_TBEGIN",
"BriefDescription": "Completion time outer tbegin",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20ae",
"EventName": "PM_OUTER_TEND",
"BriefDescription": "Completion time outer tend",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2005a",
"EventName": "PM_PREF_TRACKED",
"BriefDescription": "Total number of Prefetch Operations that were tracked",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1005a",
"EventName": "PM_PREF_TRACK_EFF",
"BriefDescription": "Prefetch Tracked was effective",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3005a",
"EventName": "PM_PREF_TRACK_INEFF",
"BriefDescription": "Prefetch tracked was ineffective",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4005a",
"EventName": "PM_PREF_TRACK_MOD",
"BriefDescription": "Prefetch tracked was moderate",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1005c",
"EventName": "PM_PREF_TRACK_MOD_L2",
"BriefDescription": "Prefetch Tracked was moderate (source L2)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3005c",
"EventName": "PM_PREF_TRACK_MOD_L3",
"BriefDescription": "Prefetch tracked was moderate (L3)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xe084",
"EventName": "PM_PTE_PREFETCH",
"BriefDescription": "PTE prefetches",
"PublicDescription": "PTE prefetches42"
},
- {,
+ {
"EventCode": "0x16081",
"EventName": "PM_RC0_ALLOC",
"BriefDescription": "RC mach 0 Busy. Used by PMU to sample ave RC livetime(mach0 used as sample point)",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0x16080",
"EventName": "PM_RC0_BUSY",
"BriefDescription": "RC mach 0 Busy. Used by PMU to sample ave RC livetime(mach0 used as sample point)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x200301ea",
"EventName": "PM_RC_LIFETIME_EXC_1024",
"BriefDescription": "Number of times the RC machine for a sampled instruction was active for more than 1024 cycles",
"PublicDescription": "Reload latency exceeded 1024 cyc"
},
- {,
+ {
"EventCode": "0x200401ec",
"EventName": "PM_RC_LIFETIME_EXC_2048",
"BriefDescription": "Number of times the RC machine for a sampled instruction was active for more than 2048 cycles",
"PublicDescription": "Threshold counter exceeded a value of 2048"
},
- {,
+ {
"EventCode": "0x200101e8",
"EventName": "PM_RC_LIFETIME_EXC_256",
"BriefDescription": "Number of times the RC machine for a sampled instruction was active for more than 256 cycles",
"PublicDescription": "Threshold counter exceed a count of 256"
},
- {,
+ {
"EventCode": "0x200201e6",
"EventName": "PM_RC_LIFETIME_EXC_32",
"BriefDescription": "Number of times the RC machine for a sampled instruction was active for more than 32 cycles",
"PublicDescription": "Reload latency exceeded 32 cyc"
},
- {,
+ {
"EventCode": "0x36088",
"EventName": "PM_RC_USAGE",
"BriefDescription": "Continuous 16 cycle(2to1) window where this signals rotates thru sampling each L2 RC machine busy. PMU uses this wave to then do 16 cyc count to sample total number of machs running",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20004",
"EventName": "PM_REAL_SRQ_FULL",
"BriefDescription": "Out of real srq entries",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2006a",
"EventName": "PM_RUN_CYC_SMT2_SHRD_MODE",
"BriefDescription": "cycles this threads run latch is set and the core is in SMT2 shared mode",
"PublicDescription": "Cycles run latch is set and core is in SMT2-shared mode"
},
- {,
+ {
"EventCode": "0x1006a",
"EventName": "PM_RUN_CYC_SMT2_SPLIT_MODE",
"BriefDescription": "Cycles run latch is set and core is in SMT2-split mode",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4006c",
"EventName": "PM_RUN_CYC_SMT8_MODE",
"BriefDescription": "Cycles run latch is set and core is in SMT8 mode",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xf082",
"EventName": "PM_SEC_ERAT_HIT",
"BriefDescription": "secondary ERAT Hit",
"PublicDescription": "secondary ERAT Hit42"
},
- {,
+ {
"EventCode": "0x508c",
"EventName": "PM_SHL_CREATED",
"BriefDescription": "Store-Hit-Load Table Entry Created",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x508e",
"EventName": "PM_SHL_ST_CONVERT",
"BriefDescription": "Store-Hit-Load Table Read Hit with entry Enabled",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x5090",
"EventName": "PM_SHL_ST_DISABLE",
"BriefDescription": "Store-Hit-Load Table Read Hit with entry Disabled (entry was disabled due to the entry shown to not prevent the flush)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x26085",
"EventName": "PM_SN0_ALLOC",
"BriefDescription": "SN mach 0 Busy. Used by PMU to sample ave RC livetime(mach0 used as sample point)",
"PublicDescription": "0.0"
},
- {,
+ {
"EventCode": "0x26084",
"EventName": "PM_SN0_BUSY",
"BriefDescription": "SN mach 0 Busy. Used by PMU to sample ave RC livetime(mach0 used as sample point)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xd0b2",
"EventName": "PM_SNOOP_TLBIE",
"BriefDescription": "TLBIE snoop",
"PublicDescription": "TLBIE snoopSnoop TLBIE"
},
- {,
+ {
"EventCode": "0x4608c",
"EventName": "PM_SN_USAGE",
"BriefDescription": "Continuous 16 cycle(2to1) window where this signals rotates thru sampling each L2 SN machine busy. PMU uses this wave to then do 16 cyc count to sample total number of machs running",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10028",
"EventName": "PM_STALL_END_GCT_EMPTY",
"BriefDescription": "Count ended because GCT went empty",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xc090",
"EventName": "PM_STCX_LSU",
"BriefDescription": "STCX executed reported at sent to nest",
"PublicDescription": "STCX executed reported at sent to nest42"
},
- {,
+ {
"EventCode": "0x3090",
"EventName": "PM_SWAP_CANCEL",
"BriefDescription": "SWAP cancel , rtag not available",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3092",
"EventName": "PM_SWAP_CANCEL_GPR",
"BriefDescription": "SWAP cancel , rtag not available for gpr",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x308c",
"EventName": "PM_SWAP_COMPLETE",
"BriefDescription": "swap cast in completed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x308e",
"EventName": "PM_SWAP_COMPLETE_GPR",
"BriefDescription": "swap cast in completed fpr gpr",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xe086",
"EventName": "PM_TABLEWALK_CYC_PREF",
"BriefDescription": "tablewalk qualified for pte prefetches",
"PublicDescription": "tablewalk qualified for pte prefetches42"
},
- {,
+ {
"EventCode": "0x20b2",
"EventName": "PM_TABORT_TRECLAIM",
"BriefDescription": "Completion time tabortnoncd, tabortcd, treclaim",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xe0ba",
"EventName": "PM_TEND_PEND_CYC",
"BriefDescription": "TEND latency per thread",
"PublicDescription": "TEND latency per thread42"
},
- {,
+ {
"EventCode": "0x10012",
"EventName": "PM_THRD_GRP_CMPL_BOTH_CYC",
"BriefDescription": "Cycles group completed on both completion slots by any thread",
"PublicDescription": "Two threads finished same cycle (gated by run latch)"
},
- {,
+ {
"EventCode": "0x40bc",
"EventName": "PM_THRD_PRIO_0_1_CYC",
"BriefDescription": "Cycles thread running at priority level 0 or 1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x40be",
"EventName": "PM_THRD_PRIO_2_3_CYC",
"BriefDescription": "Cycles thread running at priority level 2 or 3",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x5080",
"EventName": "PM_THRD_PRIO_4_5_CYC",
"BriefDescription": "Cycles thread running at priority level 4 or 5",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x5082",
"EventName": "PM_THRD_PRIO_6_7_CYC",
"BriefDescription": "Cycles thread running at priority level 6 or 7",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3098",
"EventName": "PM_THRD_REBAL_CYC",
"BriefDescription": "cycles rebalance was active",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20b8",
"EventName": "PM_TM_BEGIN_ALL",
"BriefDescription": "Tm any tbegin",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20ba",
"EventName": "PM_TM_END_ALL",
"BriefDescription": "Tm any tend",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3086",
"EventName": "PM_TM_FAIL_CONF_NON_TM",
"BriefDescription": "TEXAS fail reason @ completion",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3088",
"EventName": "PM_TM_FAIL_CON_TM",
"BriefDescription": "TEXAS fail reason @ completion",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xe0b2",
"EventName": "PM_TM_FAIL_DISALLOW",
"BriefDescription": "TM fail disallow",
"PublicDescription": "TM fail disallow42"
},
- {,
+ {
"EventCode": "0x3084",
"EventName": "PM_TM_FAIL_FOOTPRINT_OVERFLOW",
"BriefDescription": "TEXAS fail reason @ completion",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xe0b8",
"EventName": "PM_TM_FAIL_NON_TX_CONFLICT",
"BriefDescription": "Non transactional conflict from LSU whtver gets repoted to texas",
"PublicDescription": "Non transactional conflict from LSU whtver gets repoted to texas42"
},
- {,
+ {
"EventCode": "0x308a",
"EventName": "PM_TM_FAIL_SELF",
"BriefDescription": "TEXAS fail reason @ completion",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xe0b4",
"EventName": "PM_TM_FAIL_TLBIE",
"BriefDescription": "TLBIE hit bloom filter",
"PublicDescription": "TLBIE hit bloom filter42"
},
- {,
+ {
"EventCode": "0xe0b6",
"EventName": "PM_TM_FAIL_TX_CONFLICT",
"BriefDescription": "Transactional conflict from LSU, whatever gets reported to texas",
"PublicDescription": "Transactional conflict from LSU, whatever gets reported to texas 42"
},
- {,
+ {
"EventCode": "0x20bc",
"EventName": "PM_TM_TBEGIN",
"BriefDescription": "Tm nested tbegin",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3080",
"EventName": "PM_TM_TRESUME",
"BriefDescription": "Tm resume",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20be",
"EventName": "PM_TM_TSUSPEND",
"BriefDescription": "Tm suspend",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xe08c",
"EventName": "PM_UP_PREF_L3",
"BriefDescription": "Micropartition prefetch",
"PublicDescription": "Micropartition prefetch42"
},
- {,
+ {
"EventCode": "0xe08e",
"EventName": "PM_UP_PREF_POINTER",
"BriefDescription": "Micrpartition pointer prefetches",
"PublicDescription": "Micrpartition pointer prefetches42"
},
- {,
+ {
"EventCode": "0xa0a4",
"EventName": "PM_VSU0_16FLOP",
"BriefDescription": "Sixteen flops operation (SP vector versions of fdiv,fsqrt)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa080",
"EventName": "PM_VSU0_1FLOP",
"BriefDescription": "one flop (fadd, fmul, fsub, fcmp, fsel, fabs, fnabs, fres, fsqrte, fneg) operation finished",
"PublicDescription": "one flop (fadd, fmul, fsub, fcmp, fsel, fabs, fnabs, fres, fsqrte, fneg) operation finishedDecode into 1,2,4 FLOP according to instr IOP, multiplied by #vector elements according to route( eg x1, x2, x4) Only if instr sends finish to ISU"
},
- {,
+ {
"EventCode": "0xa098",
"EventName": "PM_VSU0_2FLOP",
"BriefDescription": "two flops operation (scalar fmadd, fnmadd, fmsub, fnmsub and DP vector versions of single flop instructions)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa09c",
"EventName": "PM_VSU0_4FLOP",
"BriefDescription": "four flops operation (scalar fdiv, fsqrt, DP vector version of fmadd, fnmadd, fmsub, fnmsub, SP vector versions of single flop instructions)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0a0",
"EventName": "PM_VSU0_8FLOP",
"BriefDescription": "eight flops operation (DP vector versions of fdiv,fsqrt and SP vector versions of fmadd,fnmadd,fmsub,fnmsub)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0a4",
"EventName": "PM_VSU0_COMPLEX_ISSUED",
"BriefDescription": "Complex VMX instruction issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0b4",
"EventName": "PM_VSU0_CY_ISSUED",
"BriefDescription": "Cryptographic instruction RFC02196 Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0a8",
"EventName": "PM_VSU0_DD_ISSUED",
"BriefDescription": "64BIT Decimal Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa08c",
"EventName": "PM_VSU0_DP_2FLOP",
"BriefDescription": "DP vector version of fmul, fsub, fcmp, fsel, fabs, fnabs, fres ,fsqrte, fneg",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa090",
"EventName": "PM_VSU0_DP_FMA",
"BriefDescription": "DP vector version of fmadd,fnmadd,fmsub,fnmsub",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa094",
"EventName": "PM_VSU0_DP_FSQRT_FDIV",
"BriefDescription": "DP vector versions of fdiv,fsqrt",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0ac",
"EventName": "PM_VSU0_DQ_ISSUED",
"BriefDescription": "128BIT Decimal Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0b0",
"EventName": "PM_VSU0_EX_ISSUED",
"BriefDescription": "Direct move 32/64b VRFtoGPR RFC02206 Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0bc",
"EventName": "PM_VSU0_FIN",
"BriefDescription": "VSU0 Finished an instruction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa084",
"EventName": "PM_VSU0_FMA",
"BriefDescription": "two flops operation (fmadd, fnmadd, fmsub, fnmsub) Scalar instructions only!",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb098",
"EventName": "PM_VSU0_FPSCR",
"BriefDescription": "Move to/from FPSCR type instruction issued on Pipe 0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa088",
"EventName": "PM_VSU0_FSQRT_FDIV",
"BriefDescription": "four flops operation (fdiv,fsqrt) Scalar Instructions only!",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb090",
"EventName": "PM_VSU0_PERMUTE_ISSUED",
"BriefDescription": "Permute VMX Instruction Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb088",
"EventName": "PM_VSU0_SCALAR_DP_ISSUED",
"BriefDescription": "Double Precision scalar instruction issued on Pipe0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb094",
"EventName": "PM_VSU0_SIMPLE_ISSUED",
"BriefDescription": "Simple VMX instruction issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0a8",
"EventName": "PM_VSU0_SINGLE",
"BriefDescription": "FPU single precision",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb09c",
"EventName": "PM_VSU0_SQ",
"BriefDescription": "Store Vector Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb08c",
"EventName": "PM_VSU0_STF",
"BriefDescription": "FPU store (SP or DP) issued on Pipe0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb080",
"EventName": "PM_VSU0_VECTOR_DP_ISSUED",
"BriefDescription": "Double Precision vector instruction issued on Pipe0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb084",
"EventName": "PM_VSU0_VECTOR_SP_ISSUED",
"BriefDescription": "Single Precision vector instruction issued (executed)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0a6",
"EventName": "PM_VSU1_16FLOP",
"BriefDescription": "Sixteen flops operation (SP vector versions of fdiv,fsqrt)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa082",
"EventName": "PM_VSU1_1FLOP",
"BriefDescription": "one flop (fadd, fmul, fsub, fcmp, fsel, fabs, fnabs, fres, fsqrte, fneg) operation finished",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa09a",
"EventName": "PM_VSU1_2FLOP",
"BriefDescription": "two flops operation (scalar fmadd, fnmadd, fmsub, fnmsub and DP vector versions of single flop instructions)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa09e",
"EventName": "PM_VSU1_4FLOP",
"BriefDescription": "four flops operation (scalar fdiv, fsqrt, DP vector version of fmadd, fnmadd, fmsub, fnmsub, SP vector versions of single flop instructions)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0a2",
"EventName": "PM_VSU1_8FLOP",
"BriefDescription": "eight flops operation (DP vector versions of fdiv,fsqrt and SP vector versions of fmadd,fnmadd,fmsub,fnmsub)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0a6",
"EventName": "PM_VSU1_COMPLEX_ISSUED",
"BriefDescription": "Complex VMX instruction issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0b6",
"EventName": "PM_VSU1_CY_ISSUED",
"BriefDescription": "Cryptographic instruction RFC02196 Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0aa",
"EventName": "PM_VSU1_DD_ISSUED",
"BriefDescription": "64BIT Decimal Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa08e",
"EventName": "PM_VSU1_DP_2FLOP",
"BriefDescription": "DP vector version of fmul, fsub, fcmp, fsel, fabs, fnabs, fres ,fsqrte, fneg",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa092",
"EventName": "PM_VSU1_DP_FMA",
"BriefDescription": "DP vector version of fmadd,fnmadd,fmsub,fnmsub",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa096",
"EventName": "PM_VSU1_DP_FSQRT_FDIV",
"BriefDescription": "DP vector versions of fdiv,fsqrt",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0ae",
"EventName": "PM_VSU1_DQ_ISSUED",
"BriefDescription": "128BIT Decimal Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb0b2",
"EventName": "PM_VSU1_EX_ISSUED",
"BriefDescription": "Direct move 32/64b VRFtoGPR RFC02206 Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0be",
"EventName": "PM_VSU1_FIN",
"BriefDescription": "VSU1 Finished an instruction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa086",
"EventName": "PM_VSU1_FMA",
"BriefDescription": "two flops operation (fmadd, fnmadd, fmsub, fnmsub) Scalar instructions only!",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb09a",
"EventName": "PM_VSU1_FPSCR",
"BriefDescription": "Move to/from FPSCR type instruction issued on Pipe 0",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa08a",
"EventName": "PM_VSU1_FSQRT_FDIV",
"BriefDescription": "four flops operation (fdiv,fsqrt) Scalar Instructions only!",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb092",
"EventName": "PM_VSU1_PERMUTE_ISSUED",
"BriefDescription": "Permute VMX Instruction Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb08a",
"EventName": "PM_VSU1_SCALAR_DP_ISSUED",
"BriefDescription": "Double Precision scalar instruction issued on Pipe1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb096",
"EventName": "PM_VSU1_SIMPLE_ISSUED",
"BriefDescription": "Simple VMX instruction issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xa0aa",
"EventName": "PM_VSU1_SINGLE",
"BriefDescription": "FPU single precision",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb09e",
"EventName": "PM_VSU1_SQ",
"BriefDescription": "Store Vector Issued",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb08e",
"EventName": "PM_VSU1_STF",
"BriefDescription": "FPU store (SP or DP) issued on Pipe1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb082",
"EventName": "PM_VSU1_VECTOR_DP_ISSUED",
"BriefDescription": "Double Precision vector instruction issued on Pipe1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0xb086",
"EventName": "PM_VSU1_VECTOR_SP_ISSUED",
"BriefDescription": "Single Precision vector instruction issued (executed)",
"PublicDescription": ""
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/powerpc/power8/pipeline.json b/tools/perf/pmu-events/arch/powerpc/power8/pipeline.json
index 293f3a4c6901..0acfaaef4772 100644
--- a/tools/perf/pmu-events/arch/powerpc/power8/pipeline.json
+++ b/tools/perf/pmu-events/arch/powerpc/power8/pipeline.json
@@ -1,350 +1,350 @@
[
- {,
+ {
"EventCode": "0x100f2",
"EventName": "PM_1PLUS_PPC_CMPL",
"BriefDescription": "1 or more ppc insts finished",
"PublicDescription": "1 or more ppc insts finished (completed)"
},
- {,
+ {
"EventCode": "0x400f2",
"EventName": "PM_1PLUS_PPC_DISP",
"BriefDescription": "Cycles at least one Instr Dispatched",
"PublicDescription": "Cycles at least one Instr Dispatched. Could be a group with only microcode. Issue HW016521"
},
- {,
+ {
"EventCode": "0x100fa",
"EventName": "PM_ANY_THRD_RUN_CYC",
"BriefDescription": "One of threads in run_cycles",
"PublicDescription": "Any thread in run_cycles (was one thread in run_cycles)"
},
- {,
+ {
"EventCode": "0x4000a",
"EventName": "PM_CMPLU_STALL",
"BriefDescription": "Completion stall",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d018",
"EventName": "PM_CMPLU_STALL_BRU",
"BriefDescription": "Completion stall due to a Branch Unit",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c012",
"EventName": "PM_CMPLU_STALL_DCACHE_MISS",
"BriefDescription": "Completion stall by Dcache miss",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c018",
"EventName": "PM_CMPLU_STALL_DMISS_L21_L31",
"BriefDescription": "Completion stall by Dcache miss which resolved on chip ( excluding local L2/L3)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c016",
"EventName": "PM_CMPLU_STALL_DMISS_L2L3",
"BriefDescription": "Completion stall by Dcache miss which resolved in L2/L3",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c016",
"EventName": "PM_CMPLU_STALL_DMISS_L2L3_CONFLICT",
"BriefDescription": "Completion stall due to cache miss that resolves in the L2 or L3 with a conflict",
"PublicDescription": "Completion stall due to cache miss resolving in core's L2/L3 with a conflict"
},
- {,
+ {
"EventCode": "0x4c01a",
"EventName": "PM_CMPLU_STALL_DMISS_L3MISS",
"BriefDescription": "Completion stall due to cache miss resolving missed the L3",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c018",
"EventName": "PM_CMPLU_STALL_DMISS_LMEM",
"BriefDescription": "Completion stall due to cache miss that resolves in local memory",
"PublicDescription": "Completion stall due to cache miss resolving in core's Local Memory"
},
- {,
+ {
"EventCode": "0x2c01c",
"EventName": "PM_CMPLU_STALL_DMISS_REMOTE",
"BriefDescription": "Completion stall by Dcache miss which resolved from remote chip (cache or memory)",
"PublicDescription": "Completion stall by Dcache miss which resolved on chip ( excluding local L2/L3)"
},
- {,
+ {
"EventCode": "0x4c012",
"EventName": "PM_CMPLU_STALL_ERAT_MISS",
"BriefDescription": "Completion stall due to LSU reject ERAT miss",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d016",
"EventName": "PM_CMPLU_STALL_FXLONG",
"BriefDescription": "Completion stall due to a long latency fixed point instruction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2d016",
"EventName": "PM_CMPLU_STALL_FXU",
"BriefDescription": "Completion stall due to FXU",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30036",
"EventName": "PM_CMPLU_STALL_HWSYNC",
"BriefDescription": "completion stall due to hwsync",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4d014",
"EventName": "PM_CMPLU_STALL_LOAD_FINISH",
"BriefDescription": "Completion stall due to a Load finish",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c010",
"EventName": "PM_CMPLU_STALL_LSU",
"BriefDescription": "Completion stall by LSU instruction",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10036",
"EventName": "PM_CMPLU_STALL_LWSYNC",
"BriefDescription": "completion stall due to isync/lwsync",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30006",
"EventName": "PM_CMPLU_STALL_OTHER_CMPL",
"BriefDescription": "Instructions core completed while this tread was stalled",
"PublicDescription": "Instructions core completed while this thread was stalled"
},
- {,
+ {
"EventCode": "0x4c01c",
"EventName": "PM_CMPLU_STALL_ST_FWD",
"BriefDescription": "Completion stall due to store forward",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1001c",
"EventName": "PM_CMPLU_STALL_THRD",
"BriefDescription": "Completion Stalled due to thread conflict. Group ready to complete but it was another thread's turn",
"PublicDescription": "Completion stall due to thread conflict"
},
- {,
+ {
"EventCode": "0x1e",
"EventName": "PM_CYC",
"BriefDescription": "Cycles",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10006",
"EventName": "PM_DISP_HELD",
"BriefDescription": "Dispatch Held",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4003c",
"EventName": "PM_DISP_HELD_SYNC_HOLD",
"BriefDescription": "Dispatch held due to SYNC hold",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x200f8",
"EventName": "PM_EXT_INT",
"BriefDescription": "external interrupt",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x400f8",
"EventName": "PM_FLUSH",
"BriefDescription": "Flush (any type)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30012",
"EventName": "PM_FLUSH_COMPLETION",
"BriefDescription": "Completion Flush",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3000c",
"EventName": "PM_FREQ_DOWN",
"BriefDescription": "Power Management: Below Threshold B",
"PublicDescription": "Frequency is being slewed down due to Power Management"
},
- {,
+ {
"EventCode": "0x4000c",
"EventName": "PM_FREQ_UP",
"BriefDescription": "Power Management: Above Threshold A",
"PublicDescription": "Frequency is being slewed up due to Power Management"
},
- {,
+ {
"EventCode": "0x2000a",
"EventName": "PM_HV_CYC",
"BriefDescription": "Cycles in which msr_hv is high. Note that this event does not take msr_pr into consideration",
"PublicDescription": "cycles in hypervisor mode"
},
- {,
+ {
"EventCode": "0x3405e",
"EventName": "PM_IFETCH_THROTTLE",
"BriefDescription": "Cycles in which Instruction fetch throttle was active",
"PublicDescription": "Cycles instruction fecth was throttled in IFU"
},
- {,
+ {
"EventCode": "0x10014",
"EventName": "PM_IOPS_CMPL",
"BriefDescription": "Internal Operations completed",
"PublicDescription": "IOPS Completed"
},
- {,
+ {
"EventCode": "0x3c058",
"EventName": "PM_LARX_FIN",
"BriefDescription": "Larx finished",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1002e",
"EventName": "PM_LD_CMPL",
"BriefDescription": "count of Loads completed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10062",
"EventName": "PM_LD_L3MISS_PEND_CYC",
"BriefDescription": "Cycles L3 miss was pending for this thread",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30066",
"EventName": "PM_LSU_FIN",
"BriefDescription": "LSU Finished an instruction (up to 2 per cycle)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2003e",
"EventName": "PM_LSU_LMQ_SRQ_EMPTY_CYC",
"BriefDescription": "LSU empty (lmq and srq empty)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e05c",
"EventName": "PM_LSU_REJECT_ERAT_MISS",
"BriefDescription": "LSU Reject due to ERAT (up to 4 per cycles)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4e05c",
"EventName": "PM_LSU_REJECT_LHS",
"BriefDescription": "LSU Reject due to LHS (up to 4 per cycle)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e05c",
"EventName": "PM_LSU_REJECT_LMQ_FULL",
"BriefDescription": "LSU reject due to LMQ full ( 4 per cycle)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1001a",
"EventName": "PM_LSU_SRQ_FULL_CYC",
"BriefDescription": "Storage Queue is full and is blocking dispatch",
"PublicDescription": "SRQ is Full"
},
- {,
+ {
"EventCode": "0x40014",
"EventName": "PM_PROBE_NOP_DISP",
"BriefDescription": "ProbeNops dispatched",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x600f4",
"EventName": "PM_RUN_CYC",
"BriefDescription": "Run_cycles",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3006c",
"EventName": "PM_RUN_CYC_SMT2_MODE",
"BriefDescription": "Cycles run latch is set and core is in SMT2 mode",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2006c",
"EventName": "PM_RUN_CYC_SMT4_MODE",
"BriefDescription": "cycles this threads run latch is set and the core is in SMT4 mode",
"PublicDescription": "Cycles run latch is set and core is in SMT4 mode"
},
- {,
+ {
"EventCode": "0x1006c",
"EventName": "PM_RUN_CYC_ST_MODE",
"BriefDescription": "Cycles run latch is set and core is in ST mode",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x500fa",
"EventName": "PM_RUN_INST_CMPL",
"BriefDescription": "Run_Instructions",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e058",
"EventName": "PM_STCX_FAIL",
"BriefDescription": "stcx failed",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x20016",
"EventName": "PM_ST_CMPL",
"BriefDescription": "Store completion count",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x200f0",
"EventName": "PM_ST_FIN",
"BriefDescription": "Store Instructions Finished",
"PublicDescription": "Store Instructions Finished (store sent to nest)"
},
- {,
+ {
"EventCode": "0x20018",
"EventName": "PM_ST_FWD",
"BriefDescription": "Store forwards that finished",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10026",
"EventName": "PM_TABLEWALK_CYC",
"BriefDescription": "Cycles when a tablewalk (I or D) is active",
"PublicDescription": "Tablewalk Active"
},
- {,
+ {
"EventCode": "0x300f8",
"EventName": "PM_TB_BIT_TRANS",
"BriefDescription": "timebase event",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2000c",
"EventName": "PM_THRD_ALL_RUN_CYC",
"BriefDescription": "All Threads in Run_cycles (was both threads in run_cycles)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30058",
"EventName": "PM_TLBIE_FIN",
"BriefDescription": "tlbie finished",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10060",
"EventName": "PM_TM_TRANS_RUN_CYC",
"BriefDescription": "run cycles in transactional state",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e012",
"EventName": "PM_TM_TX_PASS_RUN_CYC",
"BriefDescription": "cycles spent in successful transactions",
"PublicDescription": "run cycles spent in successful transactions"
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/powerpc/power8/pmc.json b/tools/perf/pmu-events/arch/powerpc/power8/pmc.json
index 583e4d937621..5e0469f68bea 100644
--- a/tools/perf/pmu-events/arch/powerpc/power8/pmc.json
+++ b/tools/perf/pmu-events/arch/powerpc/power8/pmc.json
@@ -1,140 +1,140 @@
[
- {,
+ {
"EventCode": "0x20010",
"EventName": "PM_PMC1_OVERFLOW",
"BriefDescription": "Overflow from counter 1",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30010",
"EventName": "PM_PMC2_OVERFLOW",
"BriefDescription": "Overflow from counter 2",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30020",
"EventName": "PM_PMC2_REWIND",
"BriefDescription": "PMC2 Rewind Event (did not match condition)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10022",
"EventName": "PM_PMC2_SAVED",
"BriefDescription": "PMC2 Rewind Value saved",
"PublicDescription": "PMC2 Rewind Value saved (matched condition)"
},
- {,
+ {
"EventCode": "0x40010",
"EventName": "PM_PMC3_OVERFLOW",
"BriefDescription": "Overflow from counter 3",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10010",
"EventName": "PM_PMC4_OVERFLOW",
"BriefDescription": "Overflow from counter 4",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10020",
"EventName": "PM_PMC4_REWIND",
"BriefDescription": "PMC4 Rewind Event",
"PublicDescription": "PMC4 Rewind Event (did not match condition)"
},
- {,
+ {
"EventCode": "0x30022",
"EventName": "PM_PMC4_SAVED",
"BriefDescription": "PMC4 Rewind Value saved (matched condition)",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10024",
"EventName": "PM_PMC5_OVERFLOW",
"BriefDescription": "Overflow from counter 5",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x30024",
"EventName": "PM_PMC6_OVERFLOW",
"BriefDescription": "Overflow from counter 6",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x400f4",
"EventName": "PM_RUN_PURR",
"BriefDescription": "Run_PURR",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x10008",
"EventName": "PM_RUN_SPURR",
"BriefDescription": "Run SPURR",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x0",
"EventName": "PM_SUSPENDED",
"BriefDescription": "Counter OFF",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x301ea",
"EventName": "PM_THRESH_EXC_1024",
"BriefDescription": "Threshold counter exceeded a value of 1024",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x401ea",
"EventName": "PM_THRESH_EXC_128",
"BriefDescription": "Threshold counter exceeded a value of 128",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x401ec",
"EventName": "PM_THRESH_EXC_2048",
"BriefDescription": "Threshold counter exceeded a value of 2048",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x101e8",
"EventName": "PM_THRESH_EXC_256",
"BriefDescription": "Threshold counter exceed a count of 256",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x201e6",
"EventName": "PM_THRESH_EXC_32",
"BriefDescription": "Threshold counter exceeded a value of 32",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x101e6",
"EventName": "PM_THRESH_EXC_4096",
"BriefDescription": "Threshold counter exceed a count of 4096",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x201e8",
"EventName": "PM_THRESH_EXC_512",
"BriefDescription": "Threshold counter exceeded a value of 512",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x301e8",
"EventName": "PM_THRESH_EXC_64",
"BriefDescription": "IFU non-branch finished",
"PublicDescription": "Threshold counter exceeded a value of 64"
},
- {,
+ {
"EventCode": "0x101ec",
"EventName": "PM_THRESH_MET",
"BriefDescription": "threshold exceeded",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4016e",
"EventName": "PM_THRESH_NOT_MET",
"BriefDescription": "Threshold counter did not meet threshold",
"PublicDescription": ""
- },
+ }
]
diff --git a/tools/perf/pmu-events/arch/powerpc/power8/translation.json b/tools/perf/pmu-events/arch/powerpc/power8/translation.json
index e47a55459bc8..623e7475b010 100644
--- a/tools/perf/pmu-events/arch/powerpc/power8/translation.json
+++ b/tools/perf/pmu-events/arch/powerpc/power8/translation.json
@@ -1,176 +1,176 @@
[
- {,
+ {
"EventCode": "0x4c054",
"EventName": "PM_DERAT_MISS_16G",
"BriefDescription": "Data ERAT Miss (Data TLB Access) page size 16G",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3c054",
"EventName": "PM_DERAT_MISS_16M",
"BriefDescription": "Data ERAT Miss (Data TLB Access) page size 16M",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1c056",
"EventName": "PM_DERAT_MISS_4K",
"BriefDescription": "Data ERAT Miss (Data TLB Access) page size 4K",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c054",
"EventName": "PM_DERAT_MISS_64K",
"BriefDescription": "Data ERAT Miss (Data TLB Access) page size 64K",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4e048",
"EventName": "PM_DPTEG_FROM_DL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3e048",
"EventName": "PM_DPTEG_FROM_DL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e042",
"EventName": "PM_DPTEG_FROM_L2",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e04e",
"EventName": "PM_DPTEG_FROM_L2MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a localtion other than the local core's L2 due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e040",
"EventName": "PM_DPTEG_FROM_L2_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 hit without dispatch conflicts on Mepf state. due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e040",
"EventName": "PM_DPTEG_FROM_L2_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 without conflict due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4e042",
"EventName": "PM_DPTEG_FROM_L3",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3e042",
"EventName": "PM_DPTEG_FROM_L3_DISP_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 with dispatch conflict due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e042",
"EventName": "PM_DPTEG_FROM_L3_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without dispatch conflicts hit on Mepf state. due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e044",
"EventName": "PM_DPTEG_FROM_L3_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without conflict due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e04c",
"EventName": "PM_DPTEG_FROM_LL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's L4 cache due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e048",
"EventName": "PM_DPTEG_FROM_LMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's Memory due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e04c",
"EventName": "PM_DPTEG_FROM_MEMORY",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a memory location including L4 from local remote or distant due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4e04a",
"EventName": "PM_DPTEG_FROM_OFF_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e048",
"EventName": "PM_DPTEG_FROM_ON_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on the same chip due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e046",
"EventName": "PM_DPTEG_FROM_RL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x1e04a",
"EventName": "PM_DPTEG_FROM_RL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2e04a",
"EventName": "PM_DPTEG_FROM_RL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on the same Node or Group ( Remote) due to a data side request",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x300fc",
"EventName": "PM_DTLB_MISS",
"BriefDescription": "Data PTEG reload",
"PublicDescription": "Data PTEG Reloaded (DTLB Miss)"
},
- {,
+ {
"EventCode": "0x1c058",
"EventName": "PM_DTLB_MISS_16G",
"BriefDescription": "Data TLB Miss page size 16G",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x4c056",
"EventName": "PM_DTLB_MISS_16M",
"BriefDescription": "Data TLB Miss page size 16M",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x2c056",
"EventName": "PM_DTLB_MISS_4K",
"BriefDescription": "Data TLB Miss page size 4k",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x3c056",
"EventName": "PM_DTLB_MISS_64K",
"BriefDescription": "Data TLB Miss page size 64K",
"PublicDescription": ""
},
- {,
+ {
"EventCode": "0x200f6",
"EventName": "PM_LSU_DERAT_MISS",
"BriefDescription": "DERAT Reloaded due to a DERAT miss",
"PublicDescription": "DERAT Reloaded (Miss)"
},
- {,
+ {
"EventCode": "0x20066",
"EventName": "PM_TLB_MISS",
"BriefDescription": "TLB Miss (I + D)",
"PublicDescription": ""
- },
+ }
]
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 03/25] perf vendor events power9: Fix commas so PMU event files are valid JSON
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 01/25] perf vendor events arm64: Fix commas so PMU event files are valid JSON Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 02/25] perf vendor events power8: " Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 04/25] perf scripts python: exported-sql-viewer.py: Fix use of TRUE with SQLite Arnaldo Carvalho de Melo
` (22 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, James Clark, Arnaldo Carvalho de Melo,
Jiri Olsa, Kevin Mooney, Madhavan Srinivasan, Mamatha Inamdar,
Mark Rutland, Peter Zijlstra, Ravi Bangoria, nd
From: James Clark <james.clark@arm.com>
No functional change.
Remove extra commas in the power9 JSON files so that the files
can be parsed and validated by other utilities such as Python
that fail to parse invalid JSON.
Before:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/powerpc/power9/cache.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x300
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/floating-point.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x141
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/frontend.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x250
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/marked.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x301
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/memory.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x300
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/other.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x308
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/pipeline.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x4D0
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/pmc.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x200
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/translation.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x1E"
(right here) ------^
JSON is invalid
$
After:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/powerpc/power9/cache.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/floating-point.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/frontend.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/marked.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/memory.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/other.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/pipeline.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/pmc.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/translation.json
JSON is valid
$
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kevin Mooney <kevin.mooney@arm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: nd@arm.com
Link: http://lore.kernel.org/lkml/20191112160342.26470-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
.../pmu-events/arch/powerpc/power9/cache.json | 44 +-
.../arch/powerpc/power9/floating-point.json | 14 +-
.../arch/powerpc/power9/frontend.json | 142 +--
.../arch/powerpc/power9/marked.json | 250 ++---
.../arch/powerpc/power9/memory.json | 52 +-
.../pmu-events/arch/powerpc/power9/other.json | 934 +++++++++---------
.../arch/powerpc/power9/pipeline.json | 212 ++--
.../pmu-events/arch/powerpc/power9/pmc.json | 48 +-
.../arch/powerpc/power9/translation.json | 92 +-
9 files changed, 894 insertions(+), 894 deletions(-)
diff --git a/tools/perf/pmu-events/arch/powerpc/power9/cache.json b/tools/perf/pmu-events/arch/powerpc/power9/cache.json
index 851072105054..2984190c2118 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/cache.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/cache.json
@@ -1,107 +1,107 @@
[
- {,
+ {
"EventCode": "0x300F4",
"EventName": "PM_THRD_CONC_RUN_INST",
"BriefDescription": "PPC Instructions Finished by this thread when all threads in the core had the run-latch set"
},
- {,
+ {
"EventCode": "0x1E056",
"EventName": "PM_CMPLU_STALL_FLUSH_ANY_THREAD",
"BriefDescription": "Cycles in which the NTC instruction is not allowed to complete because any of the 4 threads in the same core suffered a flush, which blocks completion"
},
- {,
+ {
"EventCode": "0x4D016",
"EventName": "PM_CMPLU_STALL_FXLONG",
"BriefDescription": "Completion stall due to a long latency scalar fixed point instruction (division, square root)"
},
- {,
+ {
"EventCode": "0x2D016",
"EventName": "PM_CMPLU_STALL_FXU",
"BriefDescription": "Finish stall due to a scalar fixed point or CR instruction in the execution pipeline. These instructions get routed to the ALU, ALU2, and DIV pipes"
},
- {,
+ {
"EventCode": "0x4D12A",
"EventName": "PM_MRK_DATA_FROM_RL4_CYC",
"BriefDescription": "Duration in cycles to reload from another chip's L4 on the same Node or Group ( Remote) due to a marked load"
},
- {,
+ {
"EventCode": "0x1003C",
"EventName": "PM_CMPLU_STALL_DMISS_L2L3",
"BriefDescription": "Completion stall by Dcache miss which resolved in L2/L3"
},
- {,
+ {
"EventCode": "0x4C014",
"EventName": "PM_CMPLU_STALL_LMQ_FULL",
"BriefDescription": "Finish stall because the NTF instruction was a load that missed in the L1 and the LMQ was unable to accept this load miss request because it was full"
},
- {,
+ {
"EventCode": "0x14048",
"EventName": "PM_INST_FROM_ON_CHIP_CACHE",
"BriefDescription": "The processor's Instruction cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x4D014",
"EventName": "PM_CMPLU_STALL_LOAD_FINISH",
"BriefDescription": "Finish stall because the NTF instruction was a load instruction with all its dependencies satisfied just going through the LSU pipe to finish"
},
- {,
+ {
"EventCode": "0x2404A",
"EventName": "PM_INST_FROM_RL4",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x1404A",
"EventName": "PM_INST_FROM_RL2L3_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x401EA",
"EventName": "PM_THRESH_EXC_128",
"BriefDescription": "Threshold counter exceeded a value of 128"
},
- {,
+ {
"EventCode": "0x400F6",
"EventName": "PM_BR_MPRED_CMPL",
"BriefDescription": "Number of Branch Mispredicts"
},
- {,
+ {
"EventCode": "0x2F140",
"EventName": "PM_MRK_DPTEG_FROM_L2_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 hit without dispatch conflicts on Mepf state. due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x101E6",
"EventName": "PM_THRESH_EXC_4096",
"BriefDescription": "Threshold counter exceed a count of 4096"
},
- {,
+ {
"EventCode": "0x3F14A",
"EventName": "PM_MRK_DPTEG_FROM_RMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group ( Remote) due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4C016",
"EventName": "PM_CMPLU_STALL_DMISS_L2L3_CONFLICT",
"BriefDescription": "Completion stall due to cache miss that resolves in the L2 or L3 with a conflict"
},
- {,
+ {
"EventCode": "0x2C01A",
"EventName": "PM_CMPLU_STALL_LHS",
"BriefDescription": "Finish stall because the NTF instruction was a load that hit on an older store and it was waiting for store data"
},
- {,
+ {
"EventCode": "0x401E4",
"EventName": "PM_MRK_DTLB_MISS",
"BriefDescription": "Marked dtlb miss"
},
- {,
+ {
"EventCode": "0x24046",
"EventName": "PM_INST_FROM_RL2L3_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x1002A",
"EventName": "PM_CMPLU_STALL_LARX",
"BriefDescription": "Finish stall because the NTF instruction was a larx waiting to be satisfied"
}
-]
\ No newline at end of file
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power9/floating-point.json b/tools/perf/pmu-events/arch/powerpc/power9/floating-point.json
index 8a83bca26552..d228d6c95ea2 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/floating-point.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/floating-point.json
@@ -1,32 +1,32 @@
[
- {,
+ {
"EventCode": "0x1415A",
"EventName": "PM_MRK_DATA_FROM_L2_DISP_CONFLICT_LDHITST_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L2 with load hit store conflict due to a marked load"
},
- {,
+ {
"EventCode": "0x10058",
"EventName": "PM_MEM_LOC_THRESH_IFU",
"BriefDescription": "Local Memory above threshold for IFU speculation control"
},
- {,
+ {
"EventCode": "0x2D028",
"EventName": "PM_RADIX_PWC_L2_PDE_FROM_L2",
"BriefDescription": "A Page Directory Entry was reloaded to a level 2 page walk cache from the core's L2 data cache"
},
- {,
+ {
"EventCode": "0x30012",
"EventName": "PM_FLUSH_COMPLETION",
"BriefDescription": "The instruction that was next to complete did not complete because it suffered a flush"
},
- {,
+ {
"EventCode": "0x2D154",
"EventName": "PM_MRK_DERAT_MISS_64K",
"BriefDescription": "Marked Data ERAT Miss (Data TLB Access) page size 64K"
},
- {,
+ {
"EventCode": "0x4016E",
"EventName": "PM_THRESH_NOT_MET",
"BriefDescription": "Threshold counter did not meet threshold"
}
-]
\ No newline at end of file
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power9/frontend.json b/tools/perf/pmu-events/arch/powerpc/power9/frontend.json
index f9fa84b16fb5..c8add9dfaa64 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/frontend.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/frontend.json
@@ -1,355 +1,355 @@
[
- {,
+ {
"EventCode": "0x25044",
"EventName": "PM_IPTEG_FROM_L31_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L3 on the same chip due to a instruction side request"
},
- {,
+ {
"EventCode": "0x101E8",
"EventName": "PM_THRESH_EXC_256",
"BriefDescription": "Threshold counter exceed a count of 256"
},
- {,
+ {
"EventCode": "0x4504E",
"EventName": "PM_IPTEG_FROM_L3MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a location other than the local core's L3 due to a instruction side request"
},
- {,
+ {
"EventCode": "0x1006A",
"EventName": "PM_NTC_ISSUE_HELD_DARQ_FULL",
"BriefDescription": "The NTC instruction is being held at dispatch because there are no slots in the DARQ for it"
},
- {,
+ {
"EventCode": "0x4E016",
"EventName": "PM_CMPLU_STALL_LSAQ_ARB",
"BriefDescription": "Finish stall because the NTF instruction was a load or store that was held in LSAQ because an older instruction from SRQ or LRQ won arbitration to the LSU pipe when this instruction tried to launch"
},
- {,
+ {
"EventCode": "0x1001A",
"EventName": "PM_LSU_SRQ_FULL_CYC",
"BriefDescription": "Cycles in which the Store Queue is full on all 4 slices. This is event is not per thread. All the threads will see the same count for this core resource"
},
- {,
+ {
"EventCode": "0x1E15E",
"EventName": "PM_MRK_L2_TM_REQ_ABORT",
"BriefDescription": "TM abort"
},
- {,
+ {
"EventCode": "0x34052",
"EventName": "PM_INST_SYS_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (system) mispredicted. Either the original scope was too small (Chip/Group) or the original scope was System and it should have been smaller. Counts for an instruction fetch"
},
- {,
+ {
"EventCode": "0x20114",
"EventName": "PM_MRK_L2_RC_DISP",
"BriefDescription": "Marked Instruction RC dispatched in L2"
},
- {,
+ {
"EventCode": "0x4C044",
"EventName": "PM_DATA_FROM_L31_ECO_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to a demand load"
},
- {,
+ {
"EventCode": "0x1C044",
"EventName": "PM_DATA_FROM_L3_NO_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 without conflict due to a demand load"
},
- {,
+ {
"EventCode": "0x44050",
"EventName": "PM_INST_SYS_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (system) ended up larger than Initial Pump Scope (Chip/Group) for an instruction fetch"
},
- {,
+ {
"EventCode": "0x30154",
"EventName": "PM_MRK_FAB_RSP_DCLAIM",
"BriefDescription": "Marked store had to do a dclaim"
},
- {,
+ {
"EventCode": "0x30014",
"EventName": "PM_CMPLU_STALL_STORE_FIN_ARB",
"BriefDescription": "Finish stall because the NTF instruction was a store waiting for a slot in the store finish pipe. This means the instruction is ready to finish but there are instructions ahead of it, using the finish pipe"
},
- {,
+ {
"EventCode": "0x3E054",
"EventName": "PM_LD_MISS_L1",
"BriefDescription": "Load Missed L1, counted at execution time (can be greater than loads finished). LMQ merges are not included in this count. i.e. if a load instruction misses on an address that is already allocated on the LMQ, this event will not increment for that load). Note that this count is per slice, so if a load spans multiple slices this event will increment multiple times for a single load."
},
- {,
+ {
"EventCode": "0x2E01A",
"EventName": "PM_CMPLU_STALL_LSU_FLUSH_NEXT",
"BriefDescription": "Completion stall of one cycle because the LSU requested to flush the next iop in the sequence. It takes 1 cycle for the ISU to process this request before the LSU instruction is allowed to complete"
},
- {,
+ {
"EventCode": "0x2D01C",
"EventName": "PM_CMPLU_STALL_STCX",
"BriefDescription": "Finish stall because the NTF instruction was a stcx waiting for response from L2"
},
- {,
+ {
"EventCode": "0x2C010",
"EventName": "PM_CMPLU_STALL_LSU",
"BriefDescription": "Completion stall by LSU instruction"
},
- {,
+ {
"EventCode": "0x2C042",
"EventName": "PM_DATA_FROM_L3_MEPF",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state due to a demand load"
},
- {,
+ {
"EventCode": "0x4E012",
"EventName": "PM_CMPLU_STALL_MTFPSCR",
"BriefDescription": "Completion stall because the ISU is updating the register and notifying the Effective Address Table (EAT)"
},
- {,
+ {
"EventCode": "0x100F2",
"EventName": "PM_1PLUS_PPC_CMPL",
"BriefDescription": "1 or more ppc insts finished"
},
- {,
+ {
"EventCode": "0x3001C",
"EventName": "PM_LSU_REJECT_LMQ_FULL",
"BriefDescription": "LSU Reject due to LMQ full (up to 4 per cycles)"
},
- {,
+ {
"EventCode": "0x15046",
"EventName": "PM_IPTEG_FROM_L31_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L3 on the same chip due to a instruction side request"
},
- {,
+ {
"EventCode": "0x1015E",
"EventName": "PM_MRK_FAB_RSP_RD_T_INTV",
"BriefDescription": "Sampled Read got a T intervention"
},
- {,
+ {
"EventCode": "0x101EC",
"EventName": "PM_THRESH_MET",
"BriefDescription": "threshold exceeded"
},
- {,
+ {
"EventCode": "0x10020",
"EventName": "PM_PMC4_REWIND",
"BriefDescription": "PMC4 Rewind Event"
},
- {,
+ {
"EventCode": "0x301EA",
"EventName": "PM_THRESH_EXC_1024",
"BriefDescription": "Threshold counter exceeded a value of 1024"
},
- {,
+ {
"EventCode": "0x34056",
"EventName": "PM_CMPLU_STALL_LSU_MFSPR",
"BriefDescription": "Finish stall because the NTF instruction was a mfspr instruction targeting an LSU SPR and it was waiting for the register data to be returned"
},
- {,
+ {
"EventCode": "0x44056",
"EventName": "PM_VECTOR_ST_CMPL",
"BriefDescription": "Number of vector store instructions completed"
},
- {,
+ {
"EventCode": "0x2C124",
"EventName": "PM_MRK_DATA_FROM_L2_DISP_CONFLICT_OTHER",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 with dispatch conflict due to a marked load"
},
- {,
+ {
"EventCode": "0x4C12A",
"EventName": "PM_MRK_DATA_FROM_RL2L3_SHR_CYC",
"BriefDescription": "Duration in cycles to reload with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked load"
},
- {,
+ {
"EventCode": "0x30060",
"EventName": "PM_TM_TRANS_RUN_INST",
"BriefDescription": "Run instructions completed in transactional state (gated by the run latch)"
},
- {,
+ {
"EventCode": "0x2C014",
"EventName": "PM_CMPLU_STALL_STORE_FINISH",
"BriefDescription": "Finish stall because the NTF instruction was a store with all its dependencies met, just waiting to go through the LSU pipe to finish"
},
- {,
+ {
"EventCode": "0x3515A",
"EventName": "PM_MRK_DATA_FROM_ON_CHIP_CACHE_CYC",
"BriefDescription": "Duration in cycles to reload either shared or modified data from another core's L2/L3 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0x34050",
"EventName": "PM_INST_SYS_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was system pump (prediction=correct) for an instruction fetch"
},
- {,
+ {
"EventCode": "0x3015E",
"EventName": "PM_MRK_FAB_RSP_CLAIM_RTY",
"BriefDescription": "Sampled store did a rwitm and got a rty"
},
- {,
+ {
"EventCode": "0x0",
"EventName": "PM_SUSPENDED",
"BriefDescription": "Counter OFF"
},
- {,
+ {
"EventCode": "0x10010",
"EventName": "PM_PMC4_OVERFLOW",
"BriefDescription": "Overflow from counter 4"
},
- {,
+ {
"EventCode": "0x3E04A",
"EventName": "PM_DPTEG_FROM_RMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group ( Remote) due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x2F152",
"EventName": "PM_MRK_FAB_RSP_DCLAIM_CYC",
"BriefDescription": "cycles L2 RC took for a dclaim"
},
- {,
+ {
"EventCode": "0x10004",
"EventName": "PM_CMPLU_STALL_LRQ_OTHER",
"BriefDescription": "Finish stall due to LRQ miscellaneous reasons, lost arbitration to LMQ slot, bank collisions, set prediction cleanup, set prediction multihit and others"
},
- {,
+ {
"EventCode": "0x4F150",
"EventName": "PM_MRK_FAB_RSP_RWITM_CYC",
"BriefDescription": "cycles L2 RC took for a rwitm"
},
- {,
+ {
"EventCode": "0x4E042",
"EventName": "PM_DPTEG_FROM_L3",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x1F054",
"EventName": "PM_TLB_HIT",
"BriefDescription": "Number of times the TLB had the data required by the instruction. Applies to both HPT and RPT"
},
- {,
+ {
"EventCode": "0x2C01E",
"EventName": "PM_CMPLU_STALL_SYNC_PMU_INT",
"BriefDescription": "Cycles in which the NTC instruction is waiting for a synchronous PMU interrupt"
},
- {,
+ {
"EventCode": "0x24050",
"EventName": "PM_IOPS_CMPL",
"BriefDescription": "Internal Operations completed"
},
- {,
+ {
"EventCode": "0x1515C",
"EventName": "PM_SYNC_MRK_BR_MPRED",
"BriefDescription": "Marked Branch mispredict that can cause a synchronous interrupt"
},
- {,
+ {
"EventCode": "0x300FA",
"EventName": "PM_INST_FROM_L3MISS",
"BriefDescription": "Marked instruction was reloaded from a location beyond the local chiplet"
},
- {,
+ {
"EventCode": "0x15044",
"EventName": "PM_IPTEG_FROM_L3_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without conflict due to a instruction side request"
},
- {,
+ {
"EventCode": "0x15152",
"EventName": "PM_SYNC_MRK_BR_LINK",
"BriefDescription": "Marked Branch and link branch that can cause a synchronous interrupt"
},
- {,
+ {
"EventCode": "0x1E050",
"EventName": "PM_CMPLU_STALL_TEND",
"BriefDescription": "Finish stall because the NTF instruction was a tend instruction awaiting response from L2"
},
- {,
+ {
"EventCode": "0x1013E",
"EventName": "PM_MRK_LD_MISS_EXPOSED_CYC",
"BriefDescription": "Marked Load exposed Miss (use edge detect to count #)"
},
- {,
+ {
"EventCode": "0x25042",
"EventName": "PM_IPTEG_FROM_L3_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without dispatch conflicts hit on Mepf state. due to a instruction side request"
},
- {,
+ {
"EventCode": "0x14054",
"EventName": "PM_INST_PUMP_CPRED",
"BriefDescription": "Pump prediction correct. Counts across all types of pumps for an instruction fetch"
},
- {,
+ {
"EventCode": "0x4015E",
"EventName": "PM_MRK_FAB_RSP_RD_RTY",
"BriefDescription": "Sampled L2 reads retry count"
},
- {,
+ {
"EventCode": "0x45048",
"EventName": "PM_IPTEG_FROM_DL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a instruction side request"
},
- {,
+ {
"EventCode": "0x44052",
"EventName": "PM_INST_PUMP_MPRED",
"BriefDescription": "Pump misprediction. Counts across all types of pumps for an instruction fetch"
},
- {,
+ {
"EventCode": "0x30026",
"EventName": "PM_CMPLU_STALL_STORE_DATA",
"BriefDescription": "Finish stall because the next to finish instruction was a store waiting on data"
},
- {,
+ {
"EventCode": "0x301E6",
"EventName": "PM_MRK_DERAT_MISS",
"BriefDescription": "Erat Miss (TLB Access) All page sizes"
},
- {,
+ {
"EventCode": "0x24154",
"EventName": "PM_THRESH_ACC",
"BriefDescription": "This event increments every time the threshold event counter ticks. Thresholding must be enabled (via MMCRA) and the thresholding start event must occur for this counter to increment. It will stop incrementing when the thresholding stop event occurs or when thresholding is disabled, until the next time a configured thresholding start event occurs."
},
- {,
+ {
"EventCode": "0x2015E",
"EventName": "PM_MRK_FAB_RSP_RWITM_RTY",
"BriefDescription": "Sampled store did a rwitm and got a rty"
},
- {,
+ {
"EventCode": "0x200FA",
"EventName": "PM_BR_TAKEN_CMPL",
"BriefDescription": "New event for Branch Taken"
},
- {,
+ {
"EventCode": "0x35044",
"EventName": "PM_IPTEG_FROM_L31_ECO_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's ECO L3 on the same chip due to a instruction side request"
},
- {,
+ {
"EventCode": "0x4C010",
"EventName": "PM_CMPLU_STALL_STORE_PIPE_ARB",
"BriefDescription": "Finish stall because the NTF instruction was a store waiting for the next relaunch opportunity after an internal reject. This means the instruction is ready to relaunch and tried once but lost arbitration"
},
- {,
+ {
"EventCode": "0x4C01C",
"EventName": "PM_CMPLU_STALL_ST_FWD",
"BriefDescription": "Completion stall due to store forward"
},
- {,
+ {
"EventCode": "0x3515C",
"EventName": "PM_MRK_DATA_FROM_RL4",
"BriefDescription": "The processor's data cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to a marked load"
},
- {,
+ {
"EventCode": "0x2D14C",
"EventName": "PM_MRK_DATA_FROM_L31_ECO_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0x40116",
"EventName": "PM_MRK_LARX_FIN",
"BriefDescription": "Larx finished"
},
- {,
+ {
"EventCode": "0x1003A",
"EventName": "PM_CMPLU_STALL_LSU_FIN",
"BriefDescription": "Finish stall because the NTF instruction was an LSU op (other than a load or a store) with all its dependencies met and just going through the LSU pipe to finish"
},
- {,
+ {
"EventCode": "0x3012A",
"EventName": "PM_MRK_L2_RC_DONE",
"BriefDescription": "Marked RC done"
},
- {,
+ {
"EventCode": "0x45044",
"EventName": "PM_IPTEG_FROM_L31_ECO_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's ECO L3 on the same chip due to a instruction side request"
diff --git a/tools/perf/pmu-events/arch/powerpc/power9/marked.json b/tools/perf/pmu-events/arch/powerpc/power9/marked.json
index b1954c38bab1..b24d25aba2df 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/marked.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/marked.json
@@ -1,625 +1,625 @@
[
- {,
+ {
"EventCode": "0x3013E",
"EventName": "PM_MRK_STALL_CMPLU_CYC",
"BriefDescription": "Number of cycles the marked instruction is experiencing a stall while it is next to complete (NTC)"
},
- {,
+ {
"EventCode": "0x4F056",
"EventName": "PM_RADIX_PWC_L1_PDE_FROM_L3MISS",
"BriefDescription": "A Page Directory Entry was reloaded to a level 1 page walk cache from beyond the core's L3 data cache. The source could be local/remote/distant memory or another core's cache"
},
- {,
+ {
"EventCode": "0x24158",
"EventName": "PM_MRK_INST",
"BriefDescription": "An instruction was marked. Includes both Random Instruction Sampling (RIS) at decode time and Random Event Sampling (RES) at the time the configured event happens"
},
- {,
+ {
"EventCode": "0x1E046",
"EventName": "PM_DPTEG_FROM_L31_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L3 on the same chip due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x3C04A",
"EventName": "PM_DATA_FROM_RMEM",
"BriefDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to a demand load"
},
- {,
+ {
"EventCode": "0x2C01C",
"EventName": "PM_CMPLU_STALL_DMISS_REMOTE",
"BriefDescription": "Completion stall by Dcache miss which resolved from remote chip (cache or memory)"
},
- {,
+ {
"EventCode": "0x44040",
"EventName": "PM_INST_FROM_L2_DISP_CONFLICT_OTHER",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 with dispatch conflict due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x2E050",
"EventName": "PM_DARQ0_7_9_ENTRIES",
"BriefDescription": "Cycles in which 7,8, or 9 DARQ entries (out of 12) are in use"
},
- {,
+ {
"EventCode": "0x2D02E",
"EventName": "PM_RADIX_PWC_L3_PTE_FROM_L2",
"BriefDescription": "A Page Table Entry was reloaded to a level 3 page walk cache from the core's L2 data cache. This implies that a level 4 PWC access was not necessary for this translation"
},
- {,
+ {
"EventCode": "0x3F05E",
"EventName": "PM_RADIX_PWC_L3_PTE_FROM_L3",
"BriefDescription": "A Page Table Entry was reloaded to a level 3 page walk cache from the core's L3 data cache. This implies that a level 4 PWC access was not necessary for this translation"
},
- {,
+ {
"EventCode": "0x2E01E",
"EventName": "PM_CMPLU_STALL_NTC_FLUSH",
"BriefDescription": "Completion stall due to ntc flush"
},
- {,
+ {
"EventCode": "0x1F14C",
"EventName": "PM_MRK_DPTEG_FROM_LL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's L4 cache due to a marked data side request.. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x20130",
"EventName": "PM_MRK_INST_DECODED",
"BriefDescription": "An instruction was marked at decode time. Random Instruction Sampling (RIS) only"
},
- {,
+ {
"EventCode": "0x3F144",
"EventName": "PM_MRK_DPTEG_FROM_L31_ECO_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's ECO L3 on the same chip due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4D058",
"EventName": "PM_VECTOR_FLOP_CMPL",
"BriefDescription": "Vector FP instruction completed"
},
- {,
+ {
"EventCode": "0x14040",
"EventName": "PM_INST_FROM_L2_NO_CONFLICT",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 without conflict due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x4404E",
"EventName": "PM_INST_FROM_L3MISS_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded from a location other than the local core's L3 due to a instruction fetch"
},
- {,
+ {
"EventCode": "0x3003A",
"EventName": "PM_CMPLU_STALL_EXCEPTION",
"BriefDescription": "Cycles in which the NTC instruction is not allowed to complete because it was interrupted by ANY exception, which has to be serviced before the instruction can complete"
},
- {,
+ {
"EventCode": "0x4F144",
"EventName": "PM_MRK_DPTEG_FROM_L31_ECO_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's ECO L3 on the same chip due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x3E044",
"EventName": "PM_DPTEG_FROM_L31_ECO_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's ECO L3 on the same chip due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x300F6",
"EventName": "PM_L1_DCACHE_RELOAD_VALID",
"BriefDescription": "DL1 reloaded due to Demand Load"
},
- {,
+ {
"EventCode": "0x1415E",
"EventName": "PM_MRK_DATA_FROM_L3MISS_CYC",
"BriefDescription": "Duration in cycles to reload from a location other than the local core's L3 due to a marked load"
},
- {,
+ {
"EventCode": "0x1E052",
"EventName": "PM_CMPLU_STALL_SLB",
"BriefDescription": "Finish stall because the NTF instruction was awaiting L2 response for an SLB"
},
- {,
+ {
"EventCode": "0x4404C",
"EventName": "PM_INST_FROM_DMEM",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's memory on the same Node or Group (Distant) due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x3000E",
"EventName": "PM_FXU_1PLUS_BUSY",
"BriefDescription": "At least one of the 4 FXU units is busy"
},
- {,
+ {
"EventCode": "0x2C048",
"EventName": "PM_DATA_FROM_LMEM",
"BriefDescription": "The processor's data cache was reloaded from the local chip's Memory due to a demand load"
},
- {,
+ {
"EventCode": "0x3000A",
"EventName": "PM_CMPLU_STALL_PM",
"BriefDescription": "Finish stall because the NTF instruction was issued to the Permute execution pipe and waiting to finish. Includes permute and decimal fixed point instructions (128 bit BCD arithmetic) + a few 128 bit fixpoint add/subtract instructions with carry. Not qualified by vector or multicycle"
},
- {,
+ {
"EventCode": "0x1504E",
"EventName": "PM_IPTEG_FROM_L2MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a location other than the local core's L2 due to a instruction side request"
},
- {,
+ {
"EventCode": "0x1C052",
"EventName": "PM_DATA_GRP_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (Group) ended up larger than Initial Pump Scope (Chip) for a demand load"
},
- {,
+ {
"EventCode": "0x30008",
"EventName": "PM_DISP_STARVED",
"BriefDescription": "Dispatched Starved"
},
- {,
+ {
"EventCode": "0x14042",
"EventName": "PM_INST_FROM_L2",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x4000C",
"EventName": "PM_FREQ_UP",
"BriefDescription": "Power Management: Above Threshold A"
},
- {,
+ {
"EventCode": "0x3C050",
"EventName": "PM_DATA_SYS_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was system pump (prediction=correct) for a demand load"
},
- {,
+ {
"EventCode": "0x25040",
"EventName": "PM_IPTEG_FROM_L2_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 hit without dispatch conflicts on Mepf state. due to a instruction side request"
},
- {,
+ {
"EventCode": "0x10132",
"EventName": "PM_MRK_INST_ISSUED",
"BriefDescription": "Marked instruction issued"
},
- {,
+ {
"EventCode": "0x1C046",
"EventName": "PM_DATA_FROM_L31_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L3 on the same chip due to a demand load"
},
- {,
+ {
"EventCode": "0x2C044",
"EventName": "PM_DATA_FROM_L31_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L3 on the same chip due to a demand load"
},
- {,
+ {
"EventCode": "0x2C04A",
"EventName": "PM_DATA_FROM_RL4",
"BriefDescription": "The processor's data cache was reloaded from another chip's L4 on the same Node or Group ( Remote) due to a demand load"
},
- {,
+ {
"EventCode": "0x24044",
"EventName": "PM_INST_FROM_L31_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's L3 on the same chip due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x4C050",
"EventName": "PM_DATA_SYS_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (system) ended up larger than Initial Pump Scope (Chip/Group) for a demand load"
},
- {,
+ {
"EventCode": "0x2C052",
"EventName": "PM_DATA_GRP_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (Group) ended up either larger or smaller than Initial Pump Scope for a demand load"
},
- {,
+ {
"EventCode": "0x2F148",
"EventName": "PM_MRK_DPTEG_FROM_LMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's Memory due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4D01A",
"EventName": "PM_CMPLU_STALL_EIEIO",
"BriefDescription": "Finish stall because the NTF instruction is an EIEIO waiting for response from L2"
},
- {,
+ {
"EventCode": "0x4F14E",
"EventName": "PM_MRK_DPTEG_FROM_L3MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a location other than the local core's L3 due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4F05A",
"EventName": "PM_RADIX_PWC_L4_PTE_FROM_L3",
"BriefDescription": "A Page Table Entry was reloaded to a level 4 page walk cache from the core's L3 data cache. This is the deepest level of PWC possible for a translation"
},
- {,
+ {
"EventCode": "0x1F05A",
"EventName": "PM_RADIX_PWC_L4_PTE_FROM_L2",
"BriefDescription": "A Page Table Entry was reloaded to a level 4 page walk cache from the core's L2 data cache. This is the deepest level of PWC possible for a translation"
},
- {,
+ {
"EventCode": "0x30068",
"EventName": "PM_L1_ICACHE_RELOADED_PREF",
"BriefDescription": "Counts all Icache prefetch reloads ( includes demand turned into prefetch)"
},
- {,
+ {
"EventCode": "0x4C04A",
"EventName": "PM_DATA_FROM_OFF_CHIP_CACHE",
"BriefDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a demand load"
},
- {,
+ {
"EventCode": "0x400FE",
"EventName": "PM_DATA_FROM_MEMORY",
"BriefDescription": "The processor's data cache was reloaded from a memory location including L4 from local remote or distant due to a demand load"
},
- {,
+ {
"EventCode": "0x3F058",
"EventName": "PM_RADIX_PWC_L1_PDE_FROM_L3",
"BriefDescription": "A Page Directory Entry was reloaded to a level 1 page walk cache from the core's L3 data cache"
},
- {,
+ {
"EventCode": "0x3C052",
"EventName": "PM_DATA_SYS_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (system) mispredicted. Either the original scope was too small (Chip/Group) or the original scope was System and it should have been smaller. Counts for a demand load"
},
- {,
+ {
"EventCode": "0x4D142",
"EventName": "PM_MRK_DATA_FROM_L3",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 due to a marked load"
},
- {,
+ {
"EventCode": "0x30050",
"EventName": "PM_SYS_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was system pump for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x30028",
"EventName": "PM_CMPLU_STALL_SPEC_FINISH",
"BriefDescription": "Finish stall while waiting for the non-speculative finish of either a stcx waiting for its result or a load waiting for non-critical sectors of data and ECC"
},
- {,
+ {
"EventCode": "0x400F4",
"EventName": "PM_RUN_PURR",
"BriefDescription": "Run_PURR"
},
- {,
+ {
"EventCode": "0x3404C",
"EventName": "PM_INST_FROM_DL4",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x3D05A",
"EventName": "PM_NTC_ISSUE_HELD_OTHER",
"BriefDescription": "The NTC instruction is being held at dispatch during regular pipeline cycles, or because the VSU is busy with multi-cycle instructions, or because of a write-back collision with VSU"
},
- {,
+ {
"EventCode": "0x2E048",
"EventName": "PM_DPTEG_FROM_LMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's Memory due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x2D02A",
"EventName": "PM_RADIX_PWC_L3_PDE_FROM_L2",
"BriefDescription": "A Page Directory Entry was reloaded to a level 3 page walk cache from the core's L2 data cache"
},
- {,
+ {
"EventCode": "0x1F05C",
"EventName": "PM_RADIX_PWC_L3_PDE_FROM_L3",
"BriefDescription": "A Page Directory Entry was reloaded to a level 3 page walk cache from the core's L3 data cache"
},
- {,
+ {
"EventCode": "0x4D04A",
"EventName": "PM_DARQ0_0_3_ENTRIES",
"BriefDescription": "Cycles in which 3 or less DARQ entries (out of 12) are in use"
},
- {,
+ {
"EventCode": "0x1404C",
"EventName": "PM_INST_FROM_LL4",
"BriefDescription": "The processor's Instruction cache was reloaded from the local chip's L4 cache due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x200FD",
"EventName": "PM_L1_ICACHE_MISS",
"BriefDescription": "Demand iCache Miss"
},
- {,
+ {
"EventCode": "0x34040",
"EventName": "PM_INST_FROM_L2_DISP_CONFLICT_LDHITST",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 with load hit store conflict due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x20138",
"EventName": "PM_MRK_ST_NEST",
"BriefDescription": "Marked store sent to nest"
},
- {,
+ {
"EventCode": "0x44048",
"EventName": "PM_INST_FROM_DL2L3_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x35046",
"EventName": "PM_IPTEG_FROM_L21_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L2 on the same chip due to a instruction side request"
},
- {,
+ {
"EventCode": "0x4C04E",
"EventName": "PM_DATA_FROM_L3MISS_MOD",
"BriefDescription": "The processor's data cache was reloaded from a location other than the local core's L3 due to a demand load"
},
- {,
+ {
"EventCode": "0x401E0",
"EventName": "PM_MRK_INST_CMPL",
"BriefDescription": "marked instruction completed"
},
- {,
+ {
"EventCode": "0x2C128",
"EventName": "PM_MRK_DATA_FROM_DL2L3_SHR_CYC",
"BriefDescription": "Duration in cycles to reload with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked load"
},
- {,
+ {
"EventCode": "0x34044",
"EventName": "PM_INST_FROM_L31_ECO_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x4E018",
"EventName": "PM_CMPLU_STALL_NTC_DISP_FIN",
"BriefDescription": "Finish stall because the NTF instruction was one that must finish at dispatch."
},
- {,
+ {
"EventCode": "0x2E05E",
"EventName": "PM_LMQ_EMPTY_CYC",
"BriefDescription": "Cycles in which the LMQ has no pending load misses for this thread"
},
- {,
+ {
"EventCode": "0x4C122",
"EventName": "PM_DARQ1_0_3_ENTRIES",
"BriefDescription": "Cycles in which 3 or fewer DARQ1 entries (out of 12) are in use"
},
- {,
+ {
"EventCode": "0x4F058",
"EventName": "PM_RADIX_PWC_L2_PTE_FROM_L3",
"BriefDescription": "A Page Table Entry was reloaded to a level 2 page walk cache from the core's L3 data cache. This implies that level 3 and level 4 PWC accesses were not necessary for this translation"
},
- {,
+ {
"EventCode": "0x14046",
"EventName": "PM_INST_FROM_L31_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's L3 on the same chip due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x3012C",
"EventName": "PM_MRK_ST_FWD",
"BriefDescription": "Marked st forwards"
},
- {,
+ {
"EventCode": "0x101E0",
"EventName": "PM_MRK_INST_DISP",
"BriefDescription": "The thread has dispatched a randomly sampled marked instruction"
},
- {,
+ {
"EventCode": "0x1D058",
"EventName": "PM_DARQ0_10_12_ENTRIES",
"BriefDescription": "Cycles in which 10 or more DARQ entries (out of 12) are in use"
},
- {,
+ {
"EventCode": "0x300FE",
"EventName": "PM_DATA_FROM_L3MISS",
"BriefDescription": "Demand LD - L3 Miss (not L2 hit and not L3 hit)"
},
- {,
+ {
"EventCode": "0x30006",
"EventName": "PM_CMPLU_STALL_OTHER_CMPL",
"BriefDescription": "Instructions the core completed while this tread was stalled"
},
- {,
+ {
"EventCode": "0x1005C",
"EventName": "PM_CMPLU_STALL_DP",
"BriefDescription": "Finish stall because the NTF instruction was a scalar instruction issued to the Double Precision execution pipe and waiting to finish. Includes binary floating point instructions in 32 and 64 bit binary floating point format. Not qualified multicycle. Qualified by NOT vector"
},
- {,
+ {
"EventCode": "0x1E042",
"EventName": "PM_DPTEG_FROM_L2",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x1016E",
"EventName": "PM_MRK_BR_CMPL",
"BriefDescription": "Branch Instruction completed"
},
- {,
+ {
"EventCode": "0x2013A",
"EventName": "PM_MRK_BRU_FIN",
"BriefDescription": "bru marked instr finish"
},
- {,
+ {
"EventCode": "0x4F05E",
"EventName": "PM_RADIX_PWC_L3_PTE_FROM_L3MISS",
"BriefDescription": "A Page Table Entry was reloaded to a level 3 page walk cache from beyond the core's L3 data cache. This implies that a level 4 PWC access was not necessary for this translation. The source could be local/remote/distant memory or another core's cache"
},
- {,
+ {
"EventCode": "0x400FC",
"EventName": "PM_ITLB_MISS",
"BriefDescription": "ITLB Reloaded. Counts 1 per ITLB miss for HPT but multiple for radix depending on number of levels traveresed"
},
- {,
+ {
"EventCode": "0x1E044",
"EventName": "PM_DPTEG_FROM_L3_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without conflict due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4D05A",
"EventName": "PM_NON_MATH_FLOP_CMPL",
"BriefDescription": "Non FLOP operation completed"
},
- {,
+ {
"EventCode": "0x101E2",
"EventName": "PM_MRK_BR_TAKEN_CMPL",
"BriefDescription": "Marked Branch Taken completed"
},
- {,
+ {
"EventCode": "0x3E158",
"EventName": "PM_MRK_STCX_FAIL",
"BriefDescription": "marked stcx failed"
},
- {,
+ {
"EventCode": "0x1C048",
"EventName": "PM_DATA_FROM_ON_CHIP_CACHE",
"BriefDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to a demand load"
},
- {,
+ {
"EventCode": "0x1C054",
"EventName": "PM_DATA_PUMP_CPRED",
"BriefDescription": "Pump prediction correct. Counts across all types of pumps for a demand load"
},
- {,
+ {
"EventCode": "0x4405E",
"EventName": "PM_DARQ_STORE_REJECT",
"BriefDescription": "The DARQ attempted to transmit a store into an LSAQ or SRQ entry but It was rejected. Divide by PM_DARQ_STORE_XMIT to get reject ratio"
},
- {,
+ {
"EventCode": "0x1C042",
"EventName": "PM_DATA_FROM_L2",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 due to a demand load"
},
- {,
+ {
"EventCode": "0x1D14C",
"EventName": "PM_MRK_DATA_FROM_LL4",
"BriefDescription": "The processor's data cache was reloaded from the local chip's L4 cache due to a marked load"
},
- {,
+ {
"EventCode": "0x1006C",
"EventName": "PM_RUN_CYC_ST_MODE",
"BriefDescription": "Cycles run latch is set and core is in ST mode"
},
- {,
+ {
"EventCode": "0x3C044",
"EventName": "PM_DATA_FROM_L31_ECO_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's ECO L3 on the same chip due to a demand load"
},
- {,
+ {
"EventCode": "0x4C052",
"EventName": "PM_DATA_PUMP_MPRED",
"BriefDescription": "Pump misprediction. Counts across all types of pumps for a demand load"
},
- {,
+ {
"EventCode": "0x20050",
"EventName": "PM_GRP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope and data sourced across this scope was group pump for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x1F150",
"EventName": "PM_MRK_ST_L2DISP_TO_CMPL_CYC",
"BriefDescription": "cycles from L2 rc disp to l2 rc completion"
},
- {,
+ {
"EventCode": "0x4505A",
"EventName": "PM_SP_FLOP_CMPL",
"BriefDescription": "SP instruction completed"
},
- {,
+ {
"EventCode": "0x4000A",
"EventName": "PM_ISQ_36_44_ENTRIES",
"BriefDescription": "Cycles in which 36 or more Issue Queue entries are in use. This is a shared event, not per thread. There are 44 issue queue entries across 4 slices in the whole core"
},
- {,
+ {
"EventCode": "0x2C12E",
"EventName": "PM_MRK_DATA_FROM_LL4_CYC",
"BriefDescription": "Duration in cycles to reload from the local chip's L4 cache due to a marked load"
},
- {,
+ {
"EventCode": "0x2C058",
"EventName": "PM_MEM_PREF",
"BriefDescription": "Memory prefetch for this thread. Includes L4"
},
- {,
+ {
"EventCode": "0x40012",
"EventName": "PM_L1_ICACHE_RELOADED_ALL",
"BriefDescription": "Counts all Icache reloads includes demand, prefetch, prefetch turned into demand and demand turned into prefetch"
},
- {,
+ {
"EventCode": "0x3003C",
"EventName": "PM_CMPLU_STALL_NESTED_TEND",
"BriefDescription": "Completion stall because the ISU is updating the TEXASR to keep track of the nested tend and decrement the TEXASR nested level. This is a short delay"
},
- {,
+ {
"EventCode": "0x3D05C",
"EventName": "PM_DISP_HELD_HB_FULL",
"BriefDescription": "Dispatch held due to History Buffer full. Could be GPR/VSR/VMR/FPR/CR/XVF; CR; XVF (XER/VSCR/FPSCR)"
},
- {,
+ {
"EventCode": "0x30052",
"EventName": "PM_SYS_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (system) mispredicted. Either the original scope was too small (Chip/Group) or the original scope was System and it should have been smaller. Counts for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x2E044",
"EventName": "PM_DPTEG_FROM_L31_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L3 on the same chip due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x34048",
"EventName": "PM_INST_FROM_DL2L3_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x45042",
"EventName": "PM_IPTEG_FROM_L3",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 due to a instruction side request"
},
- {,
+ {
"EventCode": "0x15042",
"EventName": "PM_IPTEG_FROM_L2",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 due to a instruction side request"
},
- {,
+ {
"EventCode": "0x1C05E",
"EventName": "PM_MEM_LOC_THRESH_LSU_MED",
"BriefDescription": "Local memory above threshold for data prefetch"
},
- {,
+ {
"EventCode": "0x40134",
"EventName": "PM_MRK_INST_TIMEO",
"BriefDescription": "marked Instruction finish timeout (instruction lost)"
},
- {,
+ {
"EventCode": "0x1002C",
"EventName": "PM_L1_DCACHE_RELOADED_ALL",
"BriefDescription": "L1 data cache reloaded for demand. If MMCR1[16] is 1, prefetches will be included as well"
},
- {,
+ {
"EventCode": "0x30130",
"EventName": "PM_MRK_INST_FIN",
"BriefDescription": "marked instruction finished"
},
- {,
+ {
"EventCode": "0x1F14A",
"EventName": "PM_MRK_DPTEG_FROM_RL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked data side request.. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x3504E",
"EventName": "PM_DARQ0_4_6_ENTRIES",
"BriefDescription": "Cycles in which 4, 5, or 6 DARQ entries (out of 12) are in use"
},
- {,
+ {
"EventCode": "0x30064",
"EventName": "PM_DARQ_STORE_XMIT",
"BriefDescription": "The DARQ attempted to transmit a store into an LSAQ or SRQ entry. Includes rejects. Not qualified by thread, so it includes counts for the whole core"
},
- {,
+ {
"EventCode": "0x45046",
"EventName": "PM_IPTEG_FROM_L21_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L2 on the same chip due to a instruction side request"
},
- {,
+ {
"EventCode": "0x2C016",
"EventName": "PM_CMPLU_STALL_PASTE",
"BriefDescription": "Finish stall because the NTF instruction was a paste waiting for response from L2"
},
- {,
+ {
"EventCode": "0x24156",
"EventName": "PM_MRK_STCX_FIN",
"BriefDescription": "Number of marked stcx instructions finished. This includes instructions in the speculative path of a branch that may be flushed"
},
- {,
+ {
"EventCode": "0x15150",
"EventName": "PM_SYNC_MRK_PROBE_NOP",
"BriefDescription": "Marked probeNops which can cause synchronous interrupts"
},
- {,
+ {
"EventCode": "0x301E4",
"EventName": "PM_MRK_BR_MPRED_CMPL",
"BriefDescription": "Marked Branch Mispredicted"
diff --git a/tools/perf/pmu-events/arch/powerpc/power9/memory.json b/tools/perf/pmu-events/arch/powerpc/power9/memory.json
index c3bb283e37e9..a3488f3ce429 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/memory.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/memory.json
@@ -1,127 +1,127 @@
[
- {,
+ {
"EventCode": "0x3006E",
"EventName": "PM_NEST_REF_CLK",
"BriefDescription": "Multiply by 4 to obtain the number of PB cycles"
},
- {,
+ {
"EventCode": "0x20010",
"EventName": "PM_PMC1_OVERFLOW",
"BriefDescription": "Overflow from counter 1"
},
- {,
+ {
"EventCode": "0x2005A",
"EventName": "PM_DARQ1_7_9_ENTRIES",
"BriefDescription": "Cycles in which 7 to 9 DARQ1 entries (out of 12) are in use"
},
- {,
+ {
"EventCode": "0x3C048",
"EventName": "PM_DATA_FROM_DL2L3_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a demand load"
},
- {,
+ {
"EventCode": "0x10008",
"EventName": "PM_RUN_SPURR",
"BriefDescription": "Run SPURR"
},
- {,
+ {
"EventCode": "0x200F6",
"EventName": "PM_LSU_DERAT_MISS",
"BriefDescription": "DERAT Reloaded due to a DERAT miss"
},
- {,
+ {
"EventCode": "0x4C048",
"EventName": "PM_DATA_FROM_DL2L3_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a demand load"
},
- {,
+ {
"EventCode": "0x1D15E",
"EventName": "PM_MRK_RUN_CYC",
"BriefDescription": "Run cycles in which a marked instruction is in the pipeline"
},
- {,
+ {
"EventCode": "0x4003E",
"EventName": "PM_LD_CMPL",
"BriefDescription": "count of Loads completed"
},
- {,
+ {
"EventCode": "0x4C042",
"EventName": "PM_DATA_FROM_L3",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 due to a demand load"
},
- {,
+ {
"EventCode": "0x4D02C",
"EventName": "PM_PMC1_REWIND",
"BriefDescription": "PMC1 rewind event"
},
- {,
+ {
"EventCode": "0x15158",
"EventName": "PM_SYNC_MRK_L2HIT",
"BriefDescription": "Marked L2 Hits that can throw a synchronous interrupt"
},
- {,
+ {
"EventCode": "0x3404A",
"EventName": "PM_INST_FROM_RMEM",
"BriefDescription": "The processor's Instruction cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x301E2",
"EventName": "PM_MRK_ST_CMPL",
"BriefDescription": "Marked store completed and sent to nest"
},
- {,
+ {
"EventCode": "0x1C050",
"EventName": "PM_DATA_CHIP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was chip pump (prediction=correct) for a demand load"
},
- {,
+ {
"EventCode": "0x4C040",
"EventName": "PM_DATA_FROM_L2_DISP_CONFLICT_OTHER",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 with dispatch conflict due to a demand load"
},
- {,
+ {
"EventCode": "0x2E05C",
"EventName": "PM_LSU_REJECT_ERAT_MISS",
"BriefDescription": "LSU Reject due to ERAT (up to 4 per cycles)"
},
- {,
+ {
"EventCode": "0x1000A",
"EventName": "PM_PMC3_REWIND",
"BriefDescription": "PMC3 rewind event. A rewind happens when a speculative event (such as latency or CPI stack) is selected on PMC3 and the stall reason or reload source did not match the one programmed in PMC3. When this occurs, the count in PMC3 will not change."
},
- {,
+ {
"EventCode": "0x3C058",
"EventName": "PM_LARX_FIN",
"BriefDescription": "Larx finished"
},
- {,
+ {
"EventCode": "0x1C040",
"EventName": "PM_DATA_FROM_L2_NO_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 without conflict due to a demand load"
},
- {,
+ {
"EventCode": "0x2C040",
"EventName": "PM_DATA_FROM_L2_MEPF",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state due to a demand load"
},
- {,
+ {
"EventCode": "0x2E05A",
"EventName": "PM_LRQ_REJECT",
"BriefDescription": "Internal LSU reject from LRQ. Rejects cause the load to go back to LRQ, but it stays contained within the LSU once it gets issued. This event counts the number of times the LRQ attempts to relaunch an instruction after a reject. Any load can suffer multiple rejects"
},
- {,
+ {
"EventCode": "0x2C05C",
"EventName": "PM_INST_GRP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was group pump (prediction=correct) for an instruction fetch (demand only)"
},
- {,
+ {
"EventCode": "0x4D056",
"EventName": "PM_NON_FMA_FLOP_CMPL",
"BriefDescription": "Non FMA instruction completed"
},
- {,
+ {
"EventCode": "0x3E050",
"EventName": "PM_DARQ1_4_6_ENTRIES",
"BriefDescription": "Cycles in which 4, 5, or 6 DARQ1 entries (out of 12) are in use"
}
-]
\ No newline at end of file
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power9/other.json b/tools/perf/pmu-events/arch/powerpc/power9/other.json
index 62b864269623..3f69422c21f9 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/other.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/other.json
@@ -1,2335 +1,2335 @@
[
- {,
+ {
"EventCode": "0x3084",
"EventName": "PM_ISU1_ISS_HOLD_ALL",
"BriefDescription": "All ISU rejects"
},
- {,
+ {
"EventCode": "0xF880",
"EventName": "PM_SNOOP_TLBIE",
"BriefDescription": "TLBIE snoop"
},
- {,
+ {
"EventCode": "0x4088",
"EventName": "PM_IC_DEMAND_REQ",
"BriefDescription": "Demand Instruction fetch request"
},
- {,
+ {
"EventCode": "0x20A4",
"EventName": "PM_TM_TRESUME",
"BriefDescription": "TM resume instruction completed"
},
- {,
+ {
"EventCode": "0x40008",
"EventName": "PM_SRQ_EMPTY_CYC",
"BriefDescription": "Cycles in which the SRQ has at least one (out of four) empty slice"
},
- {,
+ {
"EventCode": "0x20064",
"EventName": "PM_IERAT_RELOAD_4K",
"BriefDescription": "IERAT reloaded (after a miss) for 4K pages"
},
- {,
+ {
"EventCode": "0x260B4",
"EventName": "PM_L3_P2_LCO_RTY",
"BriefDescription": "L3 initiated LCO received retry on port 2 (can try 4 times)"
},
- {,
+ {
"EventCode": "0x20006",
"EventName": "PM_DISP_HELD_ISSQ_FULL",
"BriefDescription": "Dispatch held due to Issue q full. Includes issue queue and branch queue"
},
- {,
+ {
"EventCode": "0x201E4",
"EventName": "PM_MRK_DATA_FROM_L3MISS",
"BriefDescription": "The processor's data cache was reloaded from a location other than the local core's L3 due to a marked load"
},
- {,
+ {
"EventCode": "0x4E044",
"EventName": "PM_DPTEG_FROM_L31_ECO_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's ECO L3 on the same chip due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x40B8",
"EventName": "PM_BR_MPRED_TAKEN_CR",
"BriefDescription": "A Conditional Branch that resolved to taken was mispredicted as not taken (due to the BHT Direction Prediction)."
},
- {,
+ {
"EventCode": "0xF8AC",
"EventName": "PM_DC_DEALLOC_NO_CONF",
"BriefDescription": "A demand load referenced a line in an active fuzzy prefetch stream. The stream could have been allocated through the hardware prefetch mechanism or through software.Fuzzy stream confirm (out of order effects, or pf cant keep up)"
},
- {,
+ {
"EventCode": "0xD090",
"EventName": "PM_LS0_DC_COLLISIONS",
"BriefDescription": "Read-write data cache collisions"
},
- {,
+ {
"EventCode": "0x40BC",
"EventName": "PM_THRD_PRIO_0_1_CYC",
"BriefDescription": "Cycles thread running at priority level 0 or 1"
},
- {,
+ {
"EventCode": "0x4C054",
"EventName": "PM_DERAT_MISS_16G_1G",
"BriefDescription": "Data ERAT Miss (Data TLB Access) page size 16G (hpt mode) or 1G (radix mode)"
},
- {,
+ {
"EventCode": "0x2084",
"EventName": "PM_FLUSH_HB_RESTORE_CYC",
"BriefDescription": "Cycles in which no new instructions can be dispatched to the ICT after a flush. History buffer recovery"
},
- {,
+ {
"EventCode": "0x4F054",
"EventName": "PM_RADIX_PWC_MISS",
"BriefDescription": "A radix translation attempt missed in the TLB and all levels of page walk cache."
},
- {,
+ {
"EventCode": "0x26882",
"EventName": "PM_L2_DC_INV",
"BriefDescription": "D-cache invalidates sent over the reload bus to the core"
},
- {,
+ {
"EventCode": "0x24048",
"EventName": "PM_INST_FROM_LMEM",
"BriefDescription": "The processor's Instruction cache was reloaded from the local chip's Memory due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0xD8B4",
"EventName": "PM_LSU0_LRQ_S0_VALID_CYC",
"BriefDescription": "Slot 0 of LRQ valid"
},
- {,
+ {
"EventCode": "0x2E052",
"EventName": "PM_TM_PASSED",
"BriefDescription": "Number of TM transactions that passed"
},
- {,
+ {
"EventCode": "0xF088",
"EventName": "PM_LSU0_STORE_REJECT",
"BriefDescription": "All internal store rejects cause the instruction to go back to the SRQ and go to sleep until woken up to try again after the condition has been met"
},
- {,
+ {
"EventCode": "0x360B2",
"EventName": "PM_L3_GRP_GUESS_WRONG_LOW",
"BriefDescription": "Prefetch scope predictor selected GS or NNS, but was wrong because scope was LNS"
},
- {,
+ {
"EventCode": "0x168A6",
"EventName": "PM_TM_CAM_OVERFLOW",
"BriefDescription": "L3 TM CAM is full when a L2 castout of TM_SC line occurs. Line is pushed to memory"
},
- {,
+ {
"EventCode": "0xE8B0",
"EventName": "PM_TEND_PEND_CYC",
"BriefDescription": "TEND latency per thread"
},
- {,
+ {
"EventCode": "0x4884",
"EventName": "PM_IBUF_FULL_CYC",
"BriefDescription": "Cycles No room in ibuff"
},
- {,
+ {
"EventCode": "0xD08C",
"EventName": "PM_LSU2_LDMX_FIN",
"BriefDescription": "New P9 instruction LDMX. The definition of this new PMU event is (from the ldmx RFC02491): The thread has executed an ldmx instruction that accessed a doubleword that contains an effective address within an enabled section of the Load Monitored region. This event, therefore, should not occur if the FSCR has disabled the load monitored facility (FSCR[52]) or disabled the EBB facility (FSCR[56])."
},
- {,
+ {
"EventCode": "0x300F8",
"EventName": "PM_TB_BIT_TRANS",
"BriefDescription": "timebase event"
},
- {,
+ {
"EventCode": "0x3C040",
"EventName": "PM_DATA_FROM_L2_DISP_CONFLICT_LDHITST",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 with load hit store conflict due to a demand load"
},
- {,
+ {
"EventCode": "0xE0BC",
"EventName": "PM_LS0_PTE_TABLEWALK_CYC",
"BriefDescription": "Cycles when a tablewalk is pending on this thread on table 0"
},
- {,
+ {
"EventCode": "0x3884",
"EventName": "PM_ISU3_ISS_HOLD_ALL",
"BriefDescription": "All ISU rejects"
},
- {,
+ {
"EventCode": "0x468A0",
"EventName": "PM_L3_PF_OFF_CHIP_MEM",
"BriefDescription": "L3 PF from Off chip memory"
},
- {,
+ {
"EventCode": "0x268AA",
"EventName": "PM_L3_P1_LCO_DATA",
"BriefDescription": "LCO sent with data port 1"
},
- {,
+ {
"EventCode": "0xE894",
"EventName": "PM_LSU1_TM_L1_HIT",
"BriefDescription": "Load tm hit in L1"
},
- {,
+ {
"EventCode": "0x5888",
"EventName": "PM_IC_INVALIDATE",
"BriefDescription": "Ic line invalidated"
},
- {,
+ {
"EventCode": "0x2890",
"EventName": "PM_DISP_CLB_HELD_TLBIE",
"BriefDescription": "Dispatch Hold: Due to TLBIE"
},
- {,
+ {
"EventCode": "0x1001C",
"EventName": "PM_CMPLU_STALL_THRD",
"BriefDescription": "Completion Stalled because the thread was blocked"
},
- {,
+ {
"EventCode": "0x368A6",
"EventName": "PM_SNP_TM_HIT_T",
"BriefDescription": "TM snoop that is a store hits line in L3 in T, Tn or Te state (shared modified)"
},
- {,
+ {
"EventCode": "0x3001A",
"EventName": "PM_DATA_TABLEWALK_CYC",
"BriefDescription": "Data Tablewalk Cycles. Could be 1 or 2 active tablewalks. Includes data prefetches."
},
- {,
+ {
"EventCode": "0xD894",
"EventName": "PM_LS3_DC_COLLISIONS",
"BriefDescription": "Read-write data cache collisions"
},
- {,
+ {
"EventCode": "0x35158",
"EventName": "PM_MRK_DATA_FROM_L31_ECO_MOD_CYC",
"BriefDescription": "Duration in cycles to reload with Modified (M) data from another core's ECO L3 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0xF0B4",
"EventName": "PM_DC_PREF_CONS_ALLOC",
"BriefDescription": "Prefetch stream allocated in the conservative phase by either the hardware prefetch mechanism or software prefetch. The sum of this pair subtracted from the total number of allocs will give the total allocs in normal phase"
},
- {,
+ {
"EventCode": "0xF894",
"EventName": "PM_LSU3_L1_CAM_CANCEL",
"BriefDescription": "ls3 l1 tm cam cancel"
},
- {,
+ {
"EventCode": "0x2888",
"EventName": "PM_FLUSH_DISP_TLBIE",
"BriefDescription": "Dispatch Flush: TLBIE"
},
- {,
+ {
"EventCode": "0x4E11E",
"EventName": "PM_MRK_DATA_FROM_DMEM_CYC",
"BriefDescription": "Duration in cycles to reload from another chip's memory on the same Node or Group (Distant) due to a marked load"
},
- {,
+ {
"EventCode": "0x14156",
"EventName": "PM_MRK_DATA_FROM_L2_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L2 due to a marked load"
},
- {,
+ {
"EventCode": "0x468A6",
"EventName": "PM_RD_CLEARING_SC",
"BriefDescription": "Core TM load hits line in L3 in TM_SC state and causes it to be invalidated"
},
- {,
+ {
"EventCode": "0xD0B0",
"EventName": "PM_HWSYNC",
"BriefDescription": "A hwsync instruction was decoded and transferred"
},
- {,
+ {
"EventCode": "0x168B0",
"EventName": "PM_L3_P1_NODE_PUMP",
"BriefDescription": "L3 PF sent with nodal scope port 1, counts even retried requests"
},
- {,
+ {
"EventCode": "0xD0BC",
"EventName": "PM_LSU0_1_LRQF_FULL_CYC",
"BriefDescription": "Counts the number of cycles the LRQF is full. LRQF is the queue that holds loads between finish and completion. If it fills up, instructions stay in LRQ until completion, potentially backing up the LRQ"
},
- {,
+ {
"EventCode": "0x2D148",
"EventName": "PM_MRK_DATA_FROM_L2_DISP_CONFLICT_LDHITST",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 with load hit store conflict due to a marked load"
},
- {,
+ {
"EventCode": "0x468AE",
"EventName": "PM_L3_P3_CO_RTY",
"BriefDescription": "L3 CO received retry port 3 (memory only), every retry counted"
},
- {,
+ {
"EventCode": "0x460A8",
"EventName": "PM_SN_HIT",
"BriefDescription": "Any port snooper hit L3. Up to 4 can happen in a cycle but we only count 1"
},
- {,
+ {
"EventCode": "0x360AA",
"EventName": "PM_L3_P0_CO_MEM",
"BriefDescription": "L3 CO to memory port 0 with or without data"
},
- {,
+ {
"EventCode": "0xF0A4",
"EventName": "PM_DC_PREF_HW_ALLOC",
"BriefDescription": "Prefetch stream allocated by the hardware prefetch mechanism"
},
- {,
+ {
"EventCode": "0xF0BC",
"EventName": "PM_LS2_UNALIGNED_ST",
"BriefDescription": "Store instructions whose data crosses a double-word boundary, which causes it to require an additional slice than than what normally would be required of the Store of that size. If the Store wraps from slice 3 to slice 0, thee is an additional 3-cycle penalty"
},
- {,
+ {
"EventCode": "0xD0AC",
"EventName": "PM_SRQ_SYNC_CYC",
"BriefDescription": "A sync is in the S2Q (edge detect to count)"
},
- {,
+ {
"EventCode": "0x401E6",
"EventName": "PM_MRK_INST_FROM_L3MISS",
"BriefDescription": "Marked instruction was reloaded from a location beyond the local chiplet"
},
- {,
+ {
"EventCode": "0x58A8",
"EventName": "PM_DECODE_HOLD_ICT_FULL",
"BriefDescription": "Counts the number of cycles in which the IFU was not able to decode and transmit one or more instructions because all itags were in use. This means the ICT is full for this thread"
},
- {,
+ {
"EventCode": "0x26082",
"EventName": "PM_L2_IC_INV",
"BriefDescription": "I-cache Invalidates sent over the realod bus to the core"
},
- {,
+ {
"EventCode": "0xC8AC",
"EventName": "PM_LSU_FLUSH_RELAUNCH_MISS",
"BriefDescription": "If a load that has already returned data and has to relaunch for any reason then gets a miss (erat, setp, data cache), it will often be flushed at relaunch time because the data might be inconsistent"
},
- {,
+ {
"EventCode": "0x260A4",
"EventName": "PM_L3_LD_HIT",
"BriefDescription": "L3 Hits for demand LDs"
},
- {,
+ {
"EventCode": "0xF0A0",
"EventName": "PM_DATA_STORE",
"BriefDescription": "All ops that drain from s2q to L2 containing data"
},
- {,
+ {
"EventCode": "0x1D148",
"EventName": "PM_MRK_DATA_FROM_RMEM",
"BriefDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group ( Remote) due to a marked load"
},
- {,
+ {
"EventCode": "0x16088",
"EventName": "PM_L2_LOC_GUESS_CORRECT",
"BriefDescription": "L2 guess local (LNS) and guess was correct (ie data local)"
},
- {,
+ {
"EventCode": "0x160A4",
"EventName": "PM_L3_HIT",
"BriefDescription": "L3 Hits (L2 miss hitting L3, including data/instrn/xlate)"
},
- {,
+ {
"EventCode": "0xE09C",
"EventName": "PM_LSU0_TM_L1_MISS",
"BriefDescription": "Load tm L1 miss"
},
- {,
+ {
"EventCode": "0x168B4",
"EventName": "PM_L3_P1_LCO_RTY",
"BriefDescription": "L3 initiated LCO received retry on port 1 (can try 4 times)"
},
- {,
+ {
"EventCode": "0x268AC",
"EventName": "PM_L3_RD_USAGE",
"BriefDescription": "Rotating sample of 16 RD actives"
},
- {,
+ {
"EventCode": "0x1415C",
"EventName": "PM_MRK_DATA_FROM_L3_MEPF_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L3 without dispatch conflicts hit on Mepf state due to a marked load"
},
- {,
+ {
"EventCode": "0xE880",
"EventName": "PM_L1_SW_PREF",
"BriefDescription": "Software L1 Prefetches, including SW Transient Prefetches"
},
- {,
+ {
"EventCode": "0x288C",
"EventName": "PM_DISP_CLB_HELD_BAL",
"BriefDescription": "Dispatch/CLB Hold: Balance Flush"
},
- {,
+ {
"EventCode": "0x101EA",
"EventName": "PM_MRK_L1_RELOAD_VALID",
"BriefDescription": "Marked demand reload"
},
- {,
+ {
"EventCode": "0x1D156",
"EventName": "PM_MRK_LD_MISS_L1_CYC",
"BriefDescription": "Marked ld latency"
},
- {,
+ {
"EventCode": "0x4C01A",
"EventName": "PM_CMPLU_STALL_DMISS_L3MISS",
"BriefDescription": "Completion stall due to cache miss resolving missed the L3"
},
- {,
+ {
"EventCode": "0x2006C",
"EventName": "PM_RUN_CYC_SMT4_MODE",
"BriefDescription": "Cycles in which this thread's run latch is set and the core is in SMT4 mode"
},
- {,
+ {
"EventCode": "0x1D14E",
"EventName": "PM_MRK_DATA_FROM_OFF_CHIP_CACHE_CYC",
"BriefDescription": "Duration in cycles to reload either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a marked load"
},
- {,
+ {
"EventCode": "0xF888",
"EventName": "PM_LSU1_STORE_REJECT",
"BriefDescription": "All internal store rejects cause the instruction to go back to the SRQ and go to sleep until woken up to try again after the condition has been met"
},
- {,
+ {
"EventCode": "0xC098",
"EventName": "PM_LS2_UNALIGNED_LD",
"BriefDescription": "Load instructions whose data crosses a double-word boundary, which causes it to require an additional slice than than what normally would be required of the load of that size. If the load wraps from slice 3 to slice 0, thee is an additional 3-cycle penalty"
},
- {,
+ {
"EventCode": "0x20058",
"EventName": "PM_DARQ1_10_12_ENTRIES",
"BriefDescription": "Cycles in which 10 or more DARQ1 entries (out of 12) are in use"
},
- {,
+ {
"EventCode": "0x360A6",
"EventName": "PM_SNP_TM_HIT_M",
"BriefDescription": "TM snoop that is a store hits line in L3 in M or Mu state (exclusive modified)"
},
- {,
+ {
"EventCode": "0x5898",
"EventName": "PM_LINK_STACK_INVALID_PTR",
"BriefDescription": "It is most often caused by certain types of flush where the pointer is not available. Can result in the data in the link stack becoming unusable."
},
- {,
+ {
"EventCode": "0x46088",
"EventName": "PM_L2_CHIP_PUMP",
"BriefDescription": "RC requests that were local (aka chip) pump attempts"
},
- {,
+ {
"EventCode": "0x28A0",
"EventName": "PM_TM_TSUSPEND",
"BriefDescription": "TM suspend instruction completed"
},
- {,
+ {
"EventCode": "0x20054",
"EventName": "PM_L1_PREF",
"BriefDescription": "A data line was written to the L1 due to a hardware or software prefetch"
},
- {,
+ {
"EventCode": "0x2608E",
"EventName": "PM_TM_LD_CONF",
"BriefDescription": "TM Load (fav or non-fav) ran into conflict (failed)"
},
- {,
+ {
"EventCode": "0x1D144",
"EventName": "PM_MRK_DATA_FROM_L3_DISP_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 with dispatch conflict due to a marked load"
},
- {,
+ {
"EventCode": "0x400FA",
"EventName": "PM_RUN_INST_CMPL",
"BriefDescription": "Run_Instructions"
},
- {,
+ {
"EventCode": "0x15154",
"EventName": "PM_SYNC_MRK_L3MISS",
"BriefDescription": "Marked L3 misses that can throw a synchronous interrupt"
},
- {,
+ {
"EventCode": "0xE0B4",
"EventName": "PM_LS0_TM_DISALLOW",
"BriefDescription": "A TM-ineligible instruction tries to execute inside a transaction and the LSU disallows it"
},
- {,
+ {
"EventCode": "0x26884",
"EventName": "PM_DSIDE_MRU_TOUCH",
"BriefDescription": "D-side L2 MRU touch commands sent to the L2"
},
- {,
+ {
"EventCode": "0x30134",
"EventName": "PM_MRK_ST_CMPL_INT",
"BriefDescription": "marked store finished with intervention"
},
- {,
+ {
"EventCode": "0xC0B8",
"EventName": "PM_LSU_FLUSH_SAO",
"BriefDescription": "A load-hit-load condition with Strong Address Ordering will have address compare disabled and flush"
},
- {,
+ {
"EventCode": "0x50A8",
"EventName": "PM_EAT_FORCE_MISPRED",
"BriefDescription": "XL-form branch was mispredicted due to the predicted target address missing from EAT. The EAT forces a mispredict in this case since there is no predicated target to validate. This is a rare case that may occur when the EAT is full and a branch is issued"
},
- {,
+ {
"EventCode": "0xC094",
"EventName": "PM_LS0_UNALIGNED_LD",
"BriefDescription": "Load instructions whose data crosses a double-word boundary, which causes it to require an additional slice than than what normally would be required of the load of that size. If the load wraps from slice 3 to slice 0, thee is an additional 3-cycle penalty"
},
- {,
+ {
"EventCode": "0xF8BC",
"EventName": "PM_LS3_UNALIGNED_ST",
"BriefDescription": "Store instructions whose data crosses a double-word boundary, which causes it to require an additional slice than than what normally would be required of the Store of that size. If the Store wraps from slice 3 to slice 0, thee is an additional 3-cycle penalty"
},
- {,
+ {
"EventCode": "0x460AE",
"EventName": "PM_L3_P2_CO_RTY",
"BriefDescription": "L3 CO received retry port 2 (memory only), every retry counted"
},
- {,
+ {
"EventCode": "0x58B0",
"EventName": "PM_BTAC_GOOD_RESULT",
"BriefDescription": "BTAC predicts a taken branch and the BHT agrees, and the target address is correct"
},
- {,
+ {
"EventCode": "0x1C04C",
"EventName": "PM_DATA_FROM_LL4",
"BriefDescription": "The processor's data cache was reloaded from the local chip's L4 cache due to a demand load"
},
- {,
+ {
"EventCode": "0x3608E",
"EventName": "PM_TM_ST_CONF",
"BriefDescription": "TM Store (fav or non-fav) ran into conflict (failed)"
},
- {,
+ {
"EventCode": "0xF8A0",
"EventName": "PM_NON_DATA_STORE",
"BriefDescription": "All ops that drain from s2q to L2 and contain no data"
},
- {,
+ {
"EventCode": "0x3F146",
"EventName": "PM_MRK_DPTEG_FROM_L21_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L2 on the same chip due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x40A0",
"EventName": "PM_BR_UNCOND",
"BriefDescription": "Unconditional Branch Completed. HW branch prediction was not used for this branch. This can be an I-form branch, a B-form branch with BO-field set to branch always, or a B-form branch which was covenrted to a Resolve."
},
- {,
+ {
"EventCode": "0xF8A8",
"EventName": "PM_DC_PREF_FUZZY_CONF",
"BriefDescription": "A demand load referenced a line in an active fuzzy prefetch stream. The stream could have been allocated through the hardware prefetch mechanism or through software.Fuzzy stream confirm (out of order effects, or pf cant keep up)"
},
- {,
+ {
"EventCode": "0xF8A4",
"EventName": "PM_DC_PREF_SW_ALLOC",
"BriefDescription": "Prefetch stream allocated by software prefetching"
},
- {,
+ {
"EventCode": "0xE0A0",
"EventName": "PM_LSU2_TM_L1_MISS",
"BriefDescription": "Load tm L1 miss"
},
- {,
+ {
"EventCode": "0xC880",
"EventName": "PM_LS1_LD_VECTOR_FIN",
"BriefDescription": "LS1 finished load vector op"
},
- {,
+ {
"EventCode": "0x2894",
"EventName": "PM_TM_OUTER_TEND",
"BriefDescription": "Completion time outer tend"
},
- {,
+ {
"EventCode": "0xF098",
"EventName": "PM_XLATE_HPT_MODE",
"BriefDescription": "LSU reports every cycle the thread is in HPT translation mode (as opposed to radix mode)"
},
- {,
+ {
"EventCode": "0x2C04E",
"EventName": "PM_LD_MISS_L1_FIN",
"BriefDescription": "Number of load instructions that finished with an L1 miss. Note that even if a load spans multiple slices this event will increment only once per load op."
},
- {,
+ {
"EventCode": "0x30162",
"EventName": "PM_MRK_LSU_DERAT_MISS",
"BriefDescription": "Marked derat reload (miss) for any page size"
},
- {,
+ {
"EventCode": "0x160A0",
"EventName": "PM_L3_PF_MISS_L3",
"BriefDescription": "L3 PF missed in L3"
},
- {,
+ {
"EventCode": "0x1C04A",
"EventName": "PM_DATA_FROM_RL2L3_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a demand load"
},
- {,
+ {
"EventCode": "0x268B0",
"EventName": "PM_L3_P1_GRP_PUMP",
"BriefDescription": "L3 PF sent with grp scope port 1, counts even retried requests"
},
- {,
+ {
"EventCode": "0x30016",
"EventName": "PM_CMPLU_STALL_SRQ_FULL",
"BriefDescription": "Finish stall because the NTF instruction was a store that was held in LSAQ because the SRQ was full"
},
- {,
+ {
"EventCode": "0x40B4",
"EventName": "PM_BR_PRED_TA",
"BriefDescription": "Conditional Branch Completed that had its target address predicted. Only XL-form branches set this event. This equal the sum of CCACHE, LSTACK, and PCACHE"
},
- {,
+ {
"EventCode": "0x40AC",
"EventName": "PM_BR_MPRED_CCACHE",
"BriefDescription": "Conditional Branch Completed that was Mispredicted due to the Count Cache Target Prediction"
},
- {,
+ {
"EventCode": "0x3688A",
"EventName": "PM_L2_RTY_LD",
"BriefDescription": "RC retries on PB for any load from core (excludes DCBFs)"
},
- {,
+ {
"EventCode": "0xE08C",
"EventName": "PM_LSU0_ERAT_HIT",
"BriefDescription": "Primary ERAT hit. There is no secondary ERAT"
},
- {,
+ {
"EventCode": "0xE088",
"EventName": "PM_LS2_ERAT_MISS_PREF",
"BriefDescription": "LS0 Erat miss due to prefetch"
},
- {,
+ {
"EventCode": "0xF0A8",
"EventName": "PM_DC_PREF_CONF",
"BriefDescription": "A demand load referenced a line in an active prefetch stream. The stream could have been allocated through the hardware prefetch mechanism or through software. Includes forwards and backwards streams"
},
- {,
+ {
"EventCode": "0x16888",
"EventName": "PM_L2_LOC_GUESS_WRONG",
"BriefDescription": "L2 guess local (LNS) and guess was not correct (ie data not on chip)"
},
- {,
+ {
"EventCode": "0xC888",
"EventName": "PM_LSU_DTLB_MISS_64K",
"BriefDescription": "Data TLB Miss page size 64K"
},
- {,
+ {
"EventCode": "0xE0A4",
"EventName": "PM_TMA_REQ_L2",
"BriefDescription": "addrs only req to L2 only on the first one,Indication that Load footprint is not expanding"
},
- {,
+ {
"EventCode": "0xC088",
"EventName": "PM_LSU_DTLB_MISS_4K",
"BriefDescription": "Data TLB Miss page size 4K"
},
- {,
+ {
"EventCode": "0x3C042",
"EventName": "PM_DATA_FROM_L3_DISP_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 with dispatch conflict due to a demand load"
},
- {,
+ {
"EventCode": "0x168AA",
"EventName": "PM_L3_P1_LCO_NO_DATA",
"BriefDescription": "Dataless L3 LCO sent port 1"
},
- {,
+ {
"EventCode": "0x3D140",
"EventName": "PM_MRK_DATA_FROM_L2_DISP_CONFLICT_OTHER_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L2 with dispatch conflict due to a marked load"
},
- {,
+ {
"EventCode": "0xC89C",
"EventName": "PM_LS1_LAUNCH_HELD_PREF",
"BriefDescription": "Number of times a load or store instruction was unable to launch/relaunch because a high priority prefetch used that relaunch cycle"
},
- {,
+ {
"EventCode": "0x4894",
"EventName": "PM_IC_RELOAD_PRIVATE",
"BriefDescription": "Reloading line was brought in private for a specific thread. Most lines are brought in shared for all eight threads. If RA does not match then invalidates and then brings it shared to other thread. In P7 line brought in private , then line was invalidat"
},
- {,
+ {
"EventCode": "0x1688E",
"EventName": "PM_TM_LD_CAUSED_FAIL",
"BriefDescription": "Non-TM Load caused any thread to fail"
},
- {,
+ {
"EventCode": "0x26084",
"EventName": "PM_L2_RCLD_DISP_FAIL_OTHER",
"BriefDescription": "All D-side-Ld or I-side-instruction-fetch dispatch attempts for this thread that failed due to reasons other than an address collision conflicts with an L2 machines (e.g. Read-Claim/Snoop machine not available)"
},
- {,
+ {
"EventCode": "0x101E4",
"EventName": "PM_MRK_L1_ICACHE_MISS",
"BriefDescription": "sampled Instruction suffered an icache Miss"
},
- {,
+ {
"EventCode": "0x20A0",
"EventName": "PM_TM_NESTED_TBEGIN",
"BriefDescription": "Completion Tm nested tbegin"
},
- {,
+ {
"EventCode": "0x368AA",
"EventName": "PM_L3_P1_CO_MEM",
"BriefDescription": "L3 CO to memory port 1 with or without data"
},
- {,
+ {
"EventCode": "0xC8A4",
"EventName": "PM_LSU3_FALSE_LHS",
"BriefDescription": "False LHS match detected"
},
- {,
+ {
"EventCode": "0xF0B0",
"EventName": "PM_L3_LD_PREF",
"BriefDescription": "L3 load prefetch, sourced from a hardware or software stream, was sent to the nest"
},
- {,
+ {
"EventCode": "0x4D012",
"EventName": "PM_PMC3_SAVED",
"BriefDescription": "PMC3 Rewind Value saved"
},
- {,
+ {
"EventCode": "0xE888",
"EventName": "PM_LS3_ERAT_MISS_PREF",
"BriefDescription": "LS1 Erat miss due to prefetch"
},
- {,
+ {
"EventCode": "0x368B4",
"EventName": "PM_L3_RD0_BUSY",
"BriefDescription": "Lifetime, sample of RD machine 0 valid"
},
- {,
+ {
"EventCode": "0x46080",
"EventName": "PM_L2_DISP_ALL_L2MISS",
"BriefDescription": "All successful D-side-Ld/St or I-side-instruction-fetch dispatches for this thread that were an L2 miss"
},
- {,
+ {
"EventCode": "0xF8B8",
"EventName": "PM_LS1_UNALIGNED_ST",
"BriefDescription": "Store instructions whose data crosses a double-word boundary, which causes it to require an additional slice than than what normally would be required of the Store of that size. If the Store wraps from slice 3 to slice 0, thee is an additional 3-cycle penalty"
},
- {,
+ {
"EventCode": "0x408C",
"EventName": "PM_L1_DEMAND_WRITE",
"BriefDescription": "Instruction Demand sectors written into IL1"
},
- {,
+ {
"EventCode": "0x368A8",
"EventName": "PM_SN_INVL",
"BriefDescription": "Any port snooper detects a store to a line in the Sx state and invalidates the line. Up to 4 can happen in a cycle but we only count 1"
},
- {,
+ {
"EventCode": "0x160B2",
"EventName": "PM_L3_LOC_GUESS_CORRECT",
"BriefDescription": "Prefetch scope predictor selected LNS and was correct"
},
- {,
+ {
"EventCode": "0x48B4",
"EventName": "PM_DECODE_FUSION_CONST_GEN",
"BriefDescription": "32-bit constant generation"
},
- {,
+ {
"EventCode": "0x4D146",
"EventName": "PM_MRK_DATA_FROM_L21_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L2 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0xE080",
"EventName": "PM_S2Q_FULL",
"BriefDescription": "Cycles during which the S2Q is full"
},
- {,
+ {
"EventCode": "0x268B4",
"EventName": "PM_L3_P3_LCO_RTY",
"BriefDescription": "L3 initiated LCO received retry on port 3 (can try 4 times)"
},
- {,
+ {
"EventCode": "0xD8B8",
"EventName": "PM_LSU0_LMQ_S0_VALID",
"BriefDescription": "Slot 0 of LMQ valid"
},
- {,
+ {
"EventCode": "0x2098",
"EventName": "PM_TM_NESTED_TEND",
"BriefDescription": "Completion time nested tend"
},
- {,
+ {
"EventCode": "0x368A0",
"EventName": "PM_L3_PF_OFF_CHIP_CACHE",
"BriefDescription": "L3 PF from Off chip cache"
},
- {,
+ {
"EventCode": "0x20056",
"EventName": "PM_TAKEN_BR_MPRED_CMPL",
"BriefDescription": "Total number of taken branches that were incorrectly predicted as not-taken. This event counts branches completed and does not include speculative instructions"
},
- {,
+ {
"EventCode": "0x4688A",
"EventName": "PM_L2_SYS_PUMP",
"BriefDescription": "RC requests that were system pump attempts"
},
- {,
+ {
"EventCode": "0xE090",
"EventName": "PM_LSU2_ERAT_HIT",
"BriefDescription": "Primary ERAT hit. There is no secondary ERAT"
},
- {,
+ {
"EventCode": "0x4001C",
"EventName": "PM_INST_IMC_MATCH_CMPL",
"BriefDescription": "IMC Match Count"
},
- {,
+ {
"EventCode": "0x40A8",
"EventName": "PM_BR_PRED_LSTACK",
"BriefDescription": "Conditional Branch Completed that used the Link Stack for Target Prediction"
},
- {,
+ {
"EventCode": "0x268A2",
"EventName": "PM_L3_CI_MISS",
"BriefDescription": "L3 castins miss (total count)"
},
- {,
+ {
"EventCode": "0x289C",
"EventName": "PM_TM_NON_FAV_TBEGIN",
"BriefDescription": "Dispatch time non favored tbegin"
},
- {,
+ {
"EventCode": "0xF08C",
"EventName": "PM_LSU2_STORE_REJECT",
"BriefDescription": "All internal store rejects cause the instruction to go back to the SRQ and go to sleep until woken up to try again after the condition has been met"
},
- {,
+ {
"EventCode": "0x360A0",
"EventName": "PM_L3_PF_ON_CHIP_CACHE",
"BriefDescription": "L3 PF from On chip cache"
},
- {,
+ {
"EventCode": "0x35152",
"EventName": "PM_MRK_DATA_FROM_L2MISS_CYC",
"BriefDescription": "Duration in cycles to reload from a location other than the local core's L2 due to a marked load"
},
- {,
+ {
"EventCode": "0x160AC",
"EventName": "PM_L3_SN_USAGE",
"BriefDescription": "Rotating sample of 16 snoop valids"
},
- {,
+ {
"EventCode": "0x1608C",
"EventName": "PM_RC0_BUSY",
"BriefDescription": "RC mach 0 Busy. Used by PMU to sample ave RC lifetime (mach0 used as sample point)"
},
- {,
+ {
"EventCode": "0x36082",
"EventName": "PM_L2_LD_DISP",
"BriefDescription": "All successful D-side-Ld or I-side-instruction-fetch dispatches for this thread"
},
- {,
+ {
"EventCode": "0xF8B0",
"EventName": "PM_L3_SW_PREF",
"BriefDescription": "L3 load prefetch, sourced from a software prefetch stream, was sent to the nest"
},
- {,
+ {
"EventCode": "0xF884",
"EventName": "PM_TABLEWALK_CYC_PREF",
"BriefDescription": "tablewalk qualified for pte prefetches"
},
- {,
+ {
"EventCode": "0x4D144",
"EventName": "PM_MRK_DATA_FROM_L31_ECO_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0x16884",
"EventName": "PM_L2_RCLD_DISP_FAIL_ADDR",
"BriefDescription": "All D-side-Ld or I-side-instruction-fetch dispatch attempts for this thread that failed due to an address collision conflicts with an L2 machines already working on this line (e.g. ld-hit-stq or Read-claim/Castout/Snoop machines)"
},
- {,
+ {
"EventCode": "0x460A0",
"EventName": "PM_L3_PF_ON_CHIP_MEM",
"BriefDescription": "L3 PF from On chip memory"
},
- {,
+ {
"EventCode": "0xF084",
"EventName": "PM_PTE_PREFETCH",
"BriefDescription": "PTE prefetches"
},
- {,
+ {
"EventCode": "0x2D026",
"EventName": "PM_RADIX_PWC_L1_PDE_FROM_L2",
"BriefDescription": "A Page Directory Entry was reloaded to a level 1 page walk cache from the core's L2 data cache"
},
- {,
+ {
"EventCode": "0x48B0",
"EventName": "PM_BR_MPRED_PCACHE",
"BriefDescription": "Conditional Branch Completed that was Mispredicted due to pattern cache prediction"
},
- {,
+ {
"EventCode": "0x2C126",
"EventName": "PM_MRK_DATA_FROM_L2",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 due to a marked load"
},
- {,
+ {
"EventCode": "0xE0AC",
"EventName": "PM_TM_FAIL_TLBIE",
"BriefDescription": "Transaction failed because there was a TLBIE hit in the bloom filter"
},
- {,
+ {
"EventCode": "0x260AA",
"EventName": "PM_L3_P0_LCO_DATA",
"BriefDescription": "LCO sent with data port 0"
},
- {,
+ {
"EventCode": "0x4888",
"EventName": "PM_IC_PREF_REQ",
"BriefDescription": "Instruction prefetch requests"
},
- {,
+ {
"EventCode": "0xC898",
"EventName": "PM_LS3_UNALIGNED_LD",
"BriefDescription": "Load instructions whose data crosses a double-word boundary, which causes it to require an additional slice than than what normally would be required of the load of that size. If the load wraps from slice 3 to slice 0, thee is an additional 3-cycle penalty"
},
- {,
+ {
"EventCode": "0x488C",
"EventName": "PM_IC_PREF_WRITE",
"BriefDescription": "Instruction prefetch written into IL1"
},
- {,
+ {
"EventCode": "0xF89C",
"EventName": "PM_XLATE_MISS",
"BriefDescription": "The LSU requested a line from L2 for translation. It may be satisfied from any source beyond L2. Includes speculative instructions. Includes instruction, prefetch and demand"
},
- {,
+ {
"EventCode": "0x14158",
"EventName": "PM_MRK_DATA_FROM_L2_NO_CONFLICT_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L2 without conflict due to a marked load"
},
- {,
+ {
"EventCode": "0x35156",
"EventName": "PM_MRK_DATA_FROM_L31_SHR_CYC",
"BriefDescription": "Duration in cycles to reload with Shared (S) data from another core's L3 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0xC88C",
"EventName": "PM_LSU_DTLB_MISS_16G_1G",
"BriefDescription": "Data TLB Miss page size 16G (HPT) or 1G (Radix)"
},
- {,
+ {
"EventCode": "0x268A6",
"EventName": "PM_TM_RST_SC",
"BriefDescription": "TM snoop hits line in L3 that is TM_SC state and causes it to be invalidated"
},
- {,
+ {
"EventCode": "0x468A4",
"EventName": "PM_L3_TRANS_PF",
"BriefDescription": "L3 Transient prefetch received from L2"
},
- {,
+ {
"EventCode": "0x4094",
"EventName": "PM_IC_PREF_CANCEL_L2",
"BriefDescription": "L2 Squashed a demand or prefetch request"
},
- {,
+ {
"EventCode": "0x48AC",
"EventName": "PM_BR_MPRED_LSTACK",
"BriefDescription": "Conditional Branch Completed that was Mispredicted due to the Link Stack Target Prediction"
},
- {,
+ {
"EventCode": "0xE88C",
"EventName": "PM_LSU1_ERAT_HIT",
"BriefDescription": "Primary ERAT hit. There is no secondary ERAT"
},
- {,
+ {
"EventCode": "0xC0B4",
"EventName": "PM_LSU_FLUSH_WRK_ARND",
"BriefDescription": "LSU workaround flush. These flushes are setup with programmable scan only latches to perform various actions when the flush macro receives a trigger from the dbg macros. These actions include things like flushing the next op encountered for a particular thread or flushing the next op that is NTC op that is encountered on a particular slice. The kind of flush that the workaround is setup to perform is highly variable."
},
- {,
+ {
"EventCode": "0x34054",
"EventName": "PM_PARTIAL_ST_FIN",
"BriefDescription": "Any store finished by an LSU slice"
},
- {,
+ {
"EventCode": "0x5880",
"EventName": "PM_THRD_PRIO_6_7_CYC",
"BriefDescription": "Cycles thread running at priority level 6 or 7"
},
- {,
+ {
"EventCode": "0x4898",
"EventName": "PM_IC_DEMAND_L2_BR_REDIRECT",
"BriefDescription": "L2 I cache demand request due to branch Mispredict ( 15 cycle path)"
},
- {,
+ {
"EventCode": "0x4880",
"EventName": "PM_BANK_CONFLICT",
"BriefDescription": "Read blocked due to interleave conflict. The ifar logic will detect an interleave conflict and kill the data that was read that cycle."
},
- {,
+ {
"EventCode": "0x360B0",
"EventName": "PM_L3_P0_SYS_PUMP",
"BriefDescription": "L3 PF sent with sys scope port 0, counts even retried requests"
},
- {,
+ {
"EventCode": "0x3006A",
"EventName": "PM_IERAT_RELOAD_64K",
"BriefDescription": "IERAT Reloaded (Miss) for a 64k page"
},
- {,
+ {
"EventCode": "0xD8BC",
"EventName": "PM_LSU2_3_LRQF_FULL_CYC",
"BriefDescription": "Counts the number of cycles the LRQF is full. LRQF is the queue that holds loads between finish and completion. If it fills up, instructions stay in LRQ until completion, potentially backing up the LRQ"
},
- {,
+ {
"EventCode": "0x46086",
"EventName": "PM_L2_SN_M_RD_DONE",
"BriefDescription": "Snoop dispatched for a read and was M (true M)"
},
- {,
+ {
"EventCode": "0x40154",
"EventName": "PM_MRK_FAB_RSP_BKILL",
"BriefDescription": "Marked store had to do a bkill"
},
- {,
+ {
"EventCode": "0xF094",
"EventName": "PM_LSU2_L1_CAM_CANCEL",
"BriefDescription": "ls2 l1 tm cam cancel"
},
- {,
+ {
"EventCode": "0x2D014",
"EventName": "PM_CMPLU_STALL_LRQ_FULL",
"BriefDescription": "Finish stall because the NTF instruction was a load that was held in LSAQ (load-store address queue) because the LRQ (load-reorder queue) was full"
},
- {,
+ {
"EventCode": "0x3E05E",
"EventName": "PM_L3_CO_MEPF",
"BriefDescription": "L3 CO of line in Mep state (includes casthrough to memory). The Mepf state indicates that a line was brought in to satisfy an L3 prefetch request"
},
- {,
+ {
"EventCode": "0x460A2",
"EventName": "PM_L3_LAT_CI_HIT",
"BriefDescription": "L3 Lateral Castins Hit"
},
- {,
+ {
"EventCode": "0x3D14E",
"EventName": "PM_MRK_DATA_FROM_DL2L3_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked load"
},
- {,
+ {
"EventCode": "0x3D15E",
"EventName": "PM_MULT_MRK",
"BriefDescription": "mult marked instr"
},
- {,
+ {
"EventCode": "0x4084",
"EventName": "PM_EAT_FULL_CYC",
"BriefDescription": "Cycles No room in EAT"
},
- {,
+ {
"EventCode": "0x5098",
"EventName": "PM_LINK_STACK_WRONG_ADD_PRED",
"BriefDescription": "Link stack predicts wrong address, because of link stack design limitation or software violating the coding conventions"
},
- {,
+ {
"EventCode": "0x2C050",
"EventName": "PM_DATA_GRP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was group pump (prediction=correct) for a demand load"
},
- {,
+ {
"EventCode": "0xC0A4",
"EventName": "PM_LSU2_FALSE_LHS",
"BriefDescription": "False LHS match detected"
},
- {,
+ {
"EventCode": "0x58A0",
"EventName": "PM_LINK_STACK_CORRECT",
"BriefDescription": "Link stack predicts right address"
},
- {,
+ {
"EventCode": "0x36886",
"EventName": "PM_L2_SN_SX_I_DONE",
"BriefDescription": "Snoop dispatched and went from Sx to Ix"
},
- {,
+ {
"EventCode": "0x4E04A",
"EventName": "PM_DPTEG_FROM_OFF_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x2C12C",
"EventName": "PM_MRK_DATA_FROM_DL4_CYC",
"BriefDescription": "Duration in cycles to reload from another chip's L4 on a different Node or Group (Distant) due to a marked load"
},
- {,
+ {
"EventCode": "0x4080",
"EventName": "PM_INST_FROM_L1",
"BriefDescription": "Instruction fetches from L1. L1 instruction hit"
},
- {,
+ {
"EventCode": "0xE898",
"EventName": "PM_LSU3_TM_L1_HIT",
"BriefDescription": "Load tm hit in L1"
},
- {,
+ {
"EventCode": "0x260A0",
"EventName": "PM_L3_CO_MEM",
"BriefDescription": "L3 CO to memory OR of port 0 and 1 (lossy = may undercount if two cresp come in the same cyc)"
},
- {,
+ {
"EventCode": "0x16082",
"EventName": "PM_L2_CASTOUT_MOD",
"BriefDescription": "L2 Castouts - Modified (M,Mu,Me)"
},
- {,
+ {
"EventCode": "0xC09C",
"EventName": "PM_LS0_LAUNCH_HELD_PREF",
"BriefDescription": "Number of times a load or store instruction was unable to launch/relaunch because a high priority prefetch used that relaunch cycle"
},
- {,
+ {
"EventCode": "0xC8B8",
"EventName": "PM_LSU_FLUSH_LARX_STCX",
"BriefDescription": "A larx is flushed because an older larx has an LMQ reservation for the same thread. A stcx is flushed because an older stcx is in the LMQ. The flush happens when the older larx/stcx relaunches"
},
- {,
+ {
"EventCode": "0x260A6",
"EventName": "PM_NON_TM_RST_SC",
"BriefDescription": "Non-TM snoop hits line in L3 that is TM_SC state and causes it to be invalidated"
},
- {,
+ {
"EventCode": "0x3608A",
"EventName": "PM_L2_RTY_ST",
"BriefDescription": "RC retries on PB for any store from core (excludes DCBFs)"
},
- {,
+ {
"EventCode": "0x24040",
"EventName": "PM_INST_FROM_L2_MEPF",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state. due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x209C",
"EventName": "PM_TM_FAV_TBEGIN",
"BriefDescription": "Dispatch time Favored tbegin"
},
- {,
+ {
"EventCode": "0x2D01E",
"EventName": "PM_ICT_NOSLOT_DISP_HELD_ISSQ",
"BriefDescription": "Ict empty for this thread due to dispatch hold on this thread due to Issue q full, BRQ full, XVCF Full, Count cache, Link, Tar full"
},
- {,
+ {
"EventCode": "0x50A4",
"EventName": "PM_FLUSH_MPRED",
"BriefDescription": "Branch mispredict flushes. Includes target and address misprecition"
},
- {,
+ {
"EventCode": "0x1504C",
"EventName": "PM_IPTEG_FROM_LL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's L4 cache due to a instruction side request"
},
- {,
+ {
"EventCode": "0x268A4",
"EventName": "PM_L3_LD_MISS",
"BriefDescription": "L3 Misses for demand LDs"
},
- {,
+ {
"EventCode": "0x26088",
"EventName": "PM_L2_GRP_GUESS_CORRECT",
"BriefDescription": "L2 guess grp (GS or NNS) and guess was correct (data intra-group AND ^on-chip)"
},
- {,
+ {
"EventCode": "0xD088",
"EventName": "PM_LSU0_LDMX_FIN",
"BriefDescription": "New P9 instruction LDMX. The definition of this new PMU event is (from the ldmx RFC02491): The thread has executed an ldmx instruction that accessed a doubleword that contains an effective address within an enabled section of the Load Monitored region. This event, therefore, should not occur if the FSCR has disabled the load monitored facility (FSCR[52]) or disabled the EBB facility (FSCR[56])."
},
- {,
+ {
"EventCode": "0xE8B4",
"EventName": "PM_LS1_TM_DISALLOW",
"BriefDescription": "A TM-ineligible instruction tries to execute inside a transaction and the LSU disallows it"
},
- {,
+ {
"EventCode": "0x1688C",
"EventName": "PM_RC_USAGE",
"BriefDescription": "Continuous 16 cycle (2to1) window where this signals rotates thru sampling each RC machine busy. PMU uses this wave to then do 16 cyc count to sample total number of machs running"
},
- {,
+ {
"EventCode": "0x3F054",
"EventName": "PM_RADIX_PWC_L4_PTE_FROM_L3MISS",
"BriefDescription": "A Page Table Entry was reloaded to a level 4 page walk cache from beyond the core's L3 data cache. This is the deepest level of PWC possible for a translation. The source could be local/remote/distant memory or another core's cache"
},
- {,
+ {
"EventCode": "0x2608A",
"EventName": "PM_ISIDE_DISP_FAIL_ADDR",
"BriefDescription": "All I-side-instruction-fetch dispatch attempts for this thread that failed due to an address collision conflict with an L2 machine already working on this line (e.g. ld-hit-stq or RC/CO/SN machines)"
},
- {,
+ {
"EventCode": "0x50B4",
"EventName": "PM_TAGE_CORRECT_TAKEN_CMPL",
"BriefDescription": "The TAGE overrode BHT direction prediction and it was correct. Counted at completion for taken branches only"
},
- {,
+ {
"EventCode": "0x2090",
"EventName": "PM_DISP_CLB_HELD_SB",
"BriefDescription": "Dispatch/CLB Hold: Scoreboard"
},
- {,
+ {
"EventCode": "0xE0B0",
"EventName": "PM_TM_FAIL_NON_TX_CONFLICT",
"BriefDescription": "Non transactional conflict from LSU, gets reported to TEXASR"
},
- {,
+ {
"EventCode": "0x201E0",
"EventName": "PM_MRK_DATA_FROM_MEMORY",
"BriefDescription": "The processor's data cache was reloaded from a memory location including L4 from local remote or distant due to a marked load"
},
- {,
+ {
"EventCode": "0x368A2",
"EventName": "PM_L3_L2_CO_MISS",
"BriefDescription": "L2 CO miss"
},
- {,
+ {
"EventCode": "0x3608C",
"EventName": "PM_CO0_BUSY",
"BriefDescription": "CO mach 0 Busy. Used by PMU to sample ave CO lifetime (mach0 used as sample point)"
},
- {,
+ {
"EventCode": "0x2C122",
"EventName": "PM_MRK_DATA_FROM_L3_DISP_CONFLICT_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L3 with dispatch conflict due to a marked load"
},
- {,
+ {
"EventCode": "0x35154",
"EventName": "PM_MRK_DATA_FROM_L3_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L3 due to a marked load"
},
- {,
+ {
"EventCode": "0x1D140",
"EventName": "PM_MRK_DATA_FROM_L31_MOD_CYC",
"BriefDescription": "Duration in cycles to reload with Modified (M) data from another core's L3 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0x4404A",
"EventName": "PM_INST_FROM_OFF_CHIP_CACHE",
"BriefDescription": "The processor's Instruction cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x28AC",
"EventName": "PM_TM_FAIL_SELF",
"BriefDescription": "TM aborted because a self-induced conflict occurred in Suspended state, due to one of the following: a store to a storage location that was previously accessed transactionally; a dcbf, dcbi, or icbi specify- ing a block that was previously accessed transactionally; a dcbst specifying a block that was previously written transactionally; or a tlbie that specifies a translation that was pre- viously used transactionally"
},
- {,
+ {
"EventCode": "0x45056",
"EventName": "PM_SCALAR_FLOP_CMPL",
"BriefDescription": "Scalar flop operation completed"
},
- {,
+ {
"EventCode": "0x16092",
"EventName": "PM_L2_LD_MISS_128B",
"BriefDescription": "All successful D-side load dispatches that were an L2 miss (NOT Sx,Tx,Mx) for this thread and the RC calculated the request should be for 128B (i.e., M=0)"
},
- {,
+ {
"EventCode": "0x2E014",
"EventName": "PM_STCX_FIN",
"BriefDescription": "Number of stcx instructions finished. This includes instructions in the speculative path of a branch that may be flushed"
},
- {,
+ {
"EventCode": "0xD8AC",
"EventName": "PM_LWSYNC",
"BriefDescription": "An lwsync instruction was decoded and transferred"
},
- {,
+ {
"EventCode": "0x2094",
"EventName": "PM_TM_OUTER_TBEGIN",
"BriefDescription": "Completion time outer tbegin"
},
- {,
+ {
"EventCode": "0x160B4",
"EventName": "PM_L3_P0_LCO_RTY",
"BriefDescription": "L3 initiated LCO received retry on port 0 (can try 4 times)"
},
- {,
+ {
"EventCode": "0x36892",
"EventName": "PM_DSIDE_OTHER_64B_L2MEMACC",
"BriefDescription": "Valid when first beat of data comes in for an D-side fetch where data came EXCLUSIVELY from memory that was for hpc_read64, (RC had to fetch other 64B of a line from MC) i.e., number of times RC had to go to memory to get 'missing' 64B"
},
- {,
+ {
"EventCode": "0x20A8",
"EventName": "PM_TM_FAIL_FOOTPRINT_OVERFLOW",
"BriefDescription": "TM aborted because the tracking limit for transactional storage accesses was exceeded.. Asynchronous"
},
- {,
+ {
"EventCode": "0x30018",
"EventName": "PM_ICT_NOSLOT_DISP_HELD_HB_FULL",
"BriefDescription": "Ict empty for this thread due to dispatch holds because the History Buffer was full. Could be GPR/VSR/VMR/FPR/CR/XVF; CR; XVF (XER/VSCR/FPSCR)"
},
- {,
+ {
"EventCode": "0xC894",
"EventName": "PM_LS1_UNALIGNED_LD",
"BriefDescription": "Load instructions whose data crosses a double-word boundary, which causes it to require an additional slice than than what normally would be required of the load of that size. If the load wraps from slice 3 to slice 0, thee is an additional 3-cycle penalty"
},
- {,
+ {
"EventCode": "0x360A2",
"EventName": "PM_L3_L2_CO_HIT",
"BriefDescription": "L2 CO hits"
},
- {,
+ {
"EventCode": "0x36092",
"EventName": "PM_DSIDE_L2MEMACC",
"BriefDescription": "Valid when first beat of data comes in for an D-side fetch where data came EXCLUSIVELY from memory (excluding hpcread64 accesses), i.e., total memory accesses by RCs"
},
- {,
+ {
"EventCode": "0x10138",
"EventName": "PM_MRK_BR_2PATH",
"BriefDescription": "marked branches which are not strongly biased"
},
- {,
+ {
"EventCode": "0x2884",
"EventName": "PM_ISYNC",
"BriefDescription": "Isync completion count per thread"
},
- {,
+ {
"EventCode": "0x16882",
"EventName": "PM_L2_CASTOUT_SHR",
"BriefDescription": "L2 Castouts - Shared (Tx,Sx)"
},
- {,
+ {
"EventCode": "0x26092",
"EventName": "PM_L2_LD_MISS_64B",
"BriefDescription": "All successful D-side load dispatches that were an L2 miss (NOT Sx,Tx,Mx) for this thread and the RC calculated the request should be for 64B(i.e., M=1)"
},
- {,
+ {
"EventCode": "0x26080",
"EventName": "PM_L2_LD_MISS",
"BriefDescription": "All successful D-Side Load dispatches that were an L2 miss for this thread"
},
- {,
+ {
"EventCode": "0x3D14C",
"EventName": "PM_MRK_DATA_FROM_DMEM",
"BriefDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group (Distant) due to a marked load"
},
- {,
+ {
"EventCode": "0x100FA",
"EventName": "PM_ANY_THRD_RUN_CYC",
"BriefDescription": "Cycles in which at least one thread has the run latch set"
},
- {,
+ {
"EventCode": "0x2C12A",
"EventName": "PM_MRK_DATA_FROM_RMEM_CYC",
"BriefDescription": "Duration in cycles to reload from another chip's memory on the same Node or Group ( Remote) due to a marked load"
},
- {,
+ {
"EventCode": "0x25048",
"EventName": "PM_IPTEG_FROM_LMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's Memory due to a instruction side request"
},
- {,
+ {
"EventCode": "0xD8A8",
"EventName": "PM_ISLB_MISS",
"BriefDescription": "Instruction SLB Miss - Total of all segment sizes"
},
- {,
+ {
"EventCode": "0x368AE",
"EventName": "PM_L3_P1_CO_RTY",
"BriefDescription": "L3 CO received retry port 1 (memory only), every retry counted"
},
- {,
+ {
"EventCode": "0x260A2",
"EventName": "PM_L3_CI_HIT",
"BriefDescription": "L3 Castins Hit (total count)"
},
- {,
+ {
"EventCode": "0x44054",
"EventName": "PM_VECTOR_LD_CMPL",
"BriefDescription": "Number of vector load instructions completed"
},
- {,
+ {
"EventCode": "0x1E05C",
"EventName": "PM_CMPLU_STALL_NESTED_TBEGIN",
"BriefDescription": "Completion stall because the ISU is updating the TEXASR to keep track of the nested tbegin. This is a short delay, and it includes ROT"
},
- {,
+ {
"EventCode": "0xC084",
"EventName": "PM_LS2_LD_VECTOR_FIN",
"BriefDescription": "LS2 finished load vector op"
},
- {,
+ {
"EventCode": "0x1608E",
"EventName": "PM_ST_CAUSED_FAIL",
"BriefDescription": "Non-TM Store caused any thread to fail"
},
- {,
+ {
"EventCode": "0x3080",
"EventName": "PM_ISU0_ISS_HOLD_ALL",
"BriefDescription": "All ISU rejects"
},
- {,
+ {
"EventCode": "0x1515A",
"EventName": "PM_SYNC_MRK_L2MISS",
"BriefDescription": "Marked L2 Miss that can throw a synchronous interrupt"
},
- {,
+ {
"EventCode": "0x26892",
"EventName": "PM_L2_ST_MISS_64B",
"BriefDescription": "All successful D-side store dispatches that were an L2 miss (NOT Sx,Tx,Mx) for this thread and the RC calculated the request should be for 64B (i.e., M=1)"
},
- {,
+ {
"EventCode": "0x2688C",
"EventName": "PM_CO_USAGE",
"BriefDescription": "Continuous 16 cycle (2to1) window where this signals rotates thru sampling each CO machine busy. PMU uses this wave to then do 16 cyc count to sample total number of machs running"
},
- {,
+ {
"EventCode": "0x48B8",
"EventName": "PM_BR_MPRED_TAKEN_TA",
"BriefDescription": "Conditional Branch Completed that was Mispredicted due to the Target Address Prediction from the Count Cache or Link Stack. Only XL-form branches that resolved Taken set this event."
},
- {,
+ {
"EventCode": "0x50B0",
"EventName": "PM_BTAC_BAD_RESULT",
"BriefDescription": "BTAC thinks branch will be taken but it is either predicted not-taken by the BHT, or the target address is wrong (less common). In both cases, a redirect will happen"
},
- {,
+ {
"EventCode": "0xD888",
"EventName": "PM_LSU1_LDMX_FIN",
"BriefDescription": "New P9 instruction LDMX. The definition of this new PMU event is (from the ldmx RFC02491): The thread has executed an ldmx instruction that accessed a doubleword that contains an effective address within an enabled section of the Load Monitored region. This event, therefore, should not occur if the FSCR has disabled the load monitored facility (FSCR[52]) or disabled the EBB facility (FSCR[56])."
},
- {,
+ {
"EventCode": "0x58B4",
"EventName": "PM_TAGE_CORRECT",
"BriefDescription": "The TAGE overrode BHT direction prediction and it was correct. Includes taken and not taken and is counted at execution time"
},
- {,
+ {
"EventCode": "0x3688C",
"EventName": "PM_SN_USAGE",
"BriefDescription": "Continuous 16 cycle (2to1) window where this signals rotates thru sampling each SN machine busy. PMU uses this wave to then do 16 cyc count to sample total number of machs running"
},
- {,
+ {
"EventCode": "0x36084",
"EventName": "PM_L2_RCST_DISP",
"BriefDescription": "All D-side store dispatch attempts for this thread"
},
- {,
+ {
"EventCode": "0x46084",
"EventName": "PM_L2_RCST_DISP_FAIL_OTHER",
"BriefDescription": "All D-side store dispatch attempts for this thread that failed due to reason other than address collision"
},
- {,
+ {
"EventCode": "0xF0AC",
"EventName": "PM_DC_PREF_STRIDED_CONF",
"BriefDescription": "A demand load referenced a line in an active strided prefetch stream. The stream could have been allocated through the hardware prefetch mechanism or through software."
},
- {,
+ {
"EventCode": "0x45054",
"EventName": "PM_FMA_CMPL",
"BriefDescription": "two flops operation completed (fmadd, fnmadd, fmsub, fnmsub) Scalar instructions only. "
},
- {,
+ {
"EventCode": "0x201E8",
"EventName": "PM_THRESH_EXC_512",
"BriefDescription": "Threshold counter exceeded a value of 512"
},
- {,
+ {
"EventCode": "0x36080",
"EventName": "PM_L2_INST",
"BriefDescription": "All successful I-side-instruction-fetch (e.g. i-demand, i-prefetch) dispatches for this thread"
},
- {,
+ {
"EventCode": "0x3504C",
"EventName": "PM_IPTEG_FROM_DL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on a different Node or Group (Distant) due to a instruction side request"
},
- {,
+ {
"EventCode": "0xD890",
"EventName": "PM_LS1_DC_COLLISIONS",
"BriefDescription": "Read-write data cache collisions"
},
- {,
+ {
"EventCode": "0x1688A",
"EventName": "PM_ISIDE_DISP",
"BriefDescription": "All I-side-instruction-fetch dispatch attempts for this thread"
},
- {,
+ {
"EventCode": "0x468AA",
"EventName": "PM_L3_P1_CO_L31",
"BriefDescription": "L3 CO to L3.1 (LCO) port 1 with or without data"
},
- {,
+ {
"EventCode": "0x28B0",
"EventName": "PM_DISP_HELD_TBEGIN",
"BriefDescription": "This outer tbegin transaction cannot be dispatched until the previous tend instruction completes"
},
- {,
+ {
"EventCode": "0xE8A0",
"EventName": "PM_LSU3_TM_L1_MISS",
"BriefDescription": "Load tm L1 miss"
},
- {,
+ {
"EventCode": "0x2C05E",
"EventName": "PM_INST_GRP_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (Group) ended up either larger or smaller than Initial Pump Scope for an instruction fetch (demand only)"
},
- {,
+ {
"EventCode": "0xC8BC",
"EventName": "PM_STCX_SUCCESS_CMPL",
"BriefDescription": "Number of stcx instructions that completed successfully"
},
- {,
+ {
"EventCode": "0xE098",
"EventName": "PM_LSU2_TM_L1_HIT",
"BriefDescription": "Load tm hit in L1"
},
- {,
+ {
"EventCode": "0xE0B8",
"EventName": "PM_LS2_TM_DISALLOW",
"BriefDescription": "A TM-ineligible instruction tries to execute inside a transaction and the LSU disallows it"
},
- {,
+ {
"EventCode": "0x44044",
"EventName": "PM_INST_FROM_L31_ECO_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's ECO L3 on the same chip due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x16886",
"EventName": "PM_CO_DISP_FAIL",
"BriefDescription": "CO dispatch failed due to all CO machines being busy"
},
- {,
+ {
"EventCode": "0x3D146",
"EventName": "PM_MRK_DATA_FROM_L3_NO_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 without conflict due to a marked load"
},
- {,
+ {
"EventCode": "0x16892",
"EventName": "PM_L2_ST_MISS_128B",
"BriefDescription": "All successful D-side store dispatches that were an L2 miss (NOT Sx,Tx,Mx) for this thread and the RC calculated the request should be for 128B (i.e., M=0)"
},
- {,
+ {
"EventCode": "0x26890",
"EventName": "PM_ISIDE_L2MEMACC",
"BriefDescription": "Valid when first beat of data comes in for an I-side fetch where data came from memory"
},
- {,
+ {
"EventCode": "0xD094",
"EventName": "PM_LS2_DC_COLLISIONS",
"BriefDescription": "Read-write data cache collisions"
},
- {,
+ {
"EventCode": "0x3C05E",
"EventName": "PM_MEM_RWITM",
"BriefDescription": "Memory Read With Intent to Modify for this thread"
},
- {,
+ {
"EventCode": "0xC090",
"EventName": "PM_LSU_STCX",
"BriefDescription": "STCX sent to nest, i.e. total"
},
- {,
+ {
"EventCode": "0x2C120",
"EventName": "PM_MRK_DATA_FROM_L2_NO_CONFLICT",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 without conflict due to a marked load"
},
- {,
+ {
"EventCode": "0x36086",
"EventName": "PM_L2_RC_ST_DONE",
"BriefDescription": "Read-claim machine did store to line that was in Tx or Sx (Tagged or Shared state)"
},
- {,
+ {
"EventCode": "0xE8AC",
"EventName": "PM_TM_FAIL_TX_CONFLICT",
"BriefDescription": "Transactional conflict from LSU, gets reported to TEXASR"
},
- {,
+ {
"EventCode": "0x48A8",
"EventName": "PM_DECODE_FUSION_LD_ST_DISP",
"BriefDescription": "32-bit displacement D-form and 16-bit displacement X-form"
},
- {,
+ {
"EventCode": "0x3D144",
"EventName": "PM_MRK_DATA_FROM_L2_MEPF_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L2 hit without dispatch conflicts on Mepf state. due to a marked load"
},
- {,
+ {
"EventCode": "0x44046",
"EventName": "PM_INST_FROM_L21_MOD",
"BriefDescription": "The processor's Instruction cache was reloaded with Modified (M) data from another core's L2 on the same chip due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x40B0",
"EventName": "PM_BR_PRED_TAKEN_CR",
"BriefDescription": "Conditional Branch that had its direction predicted. I-form branches do not set this event. In addition, B-form branches which do not use the BHT do not set this event - these are branches with BO-field set to 'always taken' and branches"
},
- {,
+ {
"EventCode": "0x15040",
"EventName": "PM_IPTEG_FROM_L2_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 without conflict due to a instruction side request"
},
- {,
+ {
"EventCode": "0x460A6",
"EventName": "PM_RD_FORMING_SC",
"BriefDescription": "Doesn't occur"
},
- {,
+ {
"EventCode": "0x35042",
"EventName": "PM_IPTEG_FROM_L3_DISP_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 with dispatch conflict due to a instruction side request"
},
- {,
+ {
"EventCode": "0xF898",
"EventName": "PM_XLATE_RADIX_MODE",
"BriefDescription": "LSU reports every cycle the thread is in radix translation mode (as opposed to HPT mode)"
},
- {,
+ {
"EventCode": "0x2D142",
"EventName": "PM_MRK_DATA_FROM_L3_MEPF",
"BriefDescription": "The processor's data cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state. due to a marked load"
},
- {,
+ {
"EventCode": "0x160B0",
"EventName": "PM_L3_P0_NODE_PUMP",
"BriefDescription": "L3 PF sent with nodal scope port 0, counts even retried requests"
},
- {,
+ {
"EventCode": "0xD88C",
"EventName": "PM_LSU3_LDMX_FIN",
"BriefDescription": "New P9 instruction LDMX. The definition of this new PMU event is (from the ldmx RFC02491): The thread has executed an ldmx instruction that accessed a doubleword that contains an effective address within an enabled section of the Load Monitored region. This event, therefore, should not occur if the FSCR has disabled the load monitored facility (FSCR[52]) or disabled the EBB facility (FSCR[56])."
},
- {,
+ {
"EventCode": "0x36882",
"EventName": "PM_L2_LD_HIT",
"BriefDescription": "All successful D-side-Ld or I-side-instruction-fetch dispatches for this thread that were L2 hits"
},
- {,
+ {
"EventCode": "0x168AC",
"EventName": "PM_L3_CI_USAGE",
"BriefDescription": "Rotating sample of 16 CI or CO actives"
},
- {,
+ {
"EventCode": "0x20134",
"EventName": "PM_MRK_FXU_FIN",
"BriefDescription": "fxu marked instr finish"
},
- {,
+ {
"EventCode": "0x4608E",
"EventName": "PM_TM_CAP_OVERFLOW",
"BriefDescription": "TM Footprint Capacity Overflow"
},
- {,
+ {
"EventCode": "0x4F05C",
"EventName": "PM_RADIX_PWC_L2_PTE_FROM_L3MISS",
"BriefDescription": "A Page Table Entry was reloaded to a level 2 page walk cache from beyond the core's L3 data cache. This implies that level 3 and level 4 PWC accesses were not necessary for this translation. The source could be local/remote/distant memory or another core's cache"
},
- {,
+ {
"EventCode": "0x40014",
"EventName": "PM_PROBE_NOP_DISP",
"BriefDescription": "ProbeNops dispatched"
},
- {,
+ {
"EventCode": "0x10052",
"EventName": "PM_GRP_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (Group) ended up larger than Initial Pump Scope (Chip) for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x2505E",
"EventName": "PM_BACK_BR_CMPL",
"BriefDescription": "Branch instruction completed with a target address less than current instruction address"
},
- {,
+ {
"EventCode": "0x2688A",
"EventName": "PM_ISIDE_DISP_FAIL_OTHER",
"BriefDescription": "All I-side-instruction-fetch dispatch attempts for this thread that failed due to reasons other than an address collision conflict with an L2 machine (e.g. no available RC/CO machines)"
},
- {,
+ {
"EventCode": "0x2001A",
"EventName": "PM_NTC_ALL_FIN",
"BriefDescription": "Cycles after instruction finished to instruction completed."
},
- {,
+ {
"EventCode": "0x3005A",
"EventName": "PM_ISQ_0_8_ENTRIES",
"BriefDescription": "Cycles in which 8 or less Issue Queue entries are in use. This is a shared event, not per thread"
},
- {,
+ {
"EventCode": "0x3515E",
"EventName": "PM_MRK_BACK_BR_CMPL",
"BriefDescription": "Marked branch instruction completed with a target address less than current instruction address"
},
- {,
+ {
"EventCode": "0xF890",
"EventName": "PM_LSU1_L1_CAM_CANCEL",
"BriefDescription": "ls1 l1 tm cam cancel"
},
- {,
+ {
"EventCode": "0x268AE",
"EventName": "PM_L3_P3_PF_RTY",
"BriefDescription": "L3 PF received retry port 3, every retry counted"
},
- {,
+ {
"EventCode": "0xE884",
"EventName": "PM_LS1_ERAT_MISS_PREF",
"BriefDescription": "LS1 Erat miss due to prefetch"
},
- {,
+ {
"EventCode": "0xE89C",
"EventName": "PM_LSU1_TM_L1_MISS",
"BriefDescription": "Load tm L1 miss"
},
- {,
+ {
"EventCode": "0x28A8",
"EventName": "PM_TM_FAIL_CONF_NON_TM",
"BriefDescription": "TM aborted because a conflict occurred with a non-transactional access by another processor"
},
- {,
+ {
"EventCode": "0x16890",
"EventName": "PM_L1PF_L2MEMACC",
"BriefDescription": "Valid when first beat of data comes in for an L1PF where data came from memory"
},
- {,
+ {
"EventCode": "0x4504C",
"EventName": "PM_IPTEG_FROM_DMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group (Distant) due to a instruction side request"
},
- {,
+ {
"EventCode": "0x1002E",
"EventName": "PM_LMQ_MERGE",
"BriefDescription": "A demand miss collides with a prefetch for the same line"
},
- {,
+ {
"EventCode": "0x160B6",
"EventName": "PM_L3_WI0_BUSY",
"BriefDescription": "Rotating sample of 8 WI valid (duplicate)"
},
- {,
+ {
"EventCode": "0x368AC",
"EventName": "PM_L3_CO0_BUSY",
"BriefDescription": "Lifetime, sample of CO machine 0 valid"
},
- {,
+ {
"EventCode": "0x2E040",
"EventName": "PM_DPTEG_FROM_L2_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 hit without dispatch conflicts on Mepf state. due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x1D152",
"EventName": "PM_MRK_DATA_FROM_DL4",
"BriefDescription": "The processor's data cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to a marked load"
},
- {,
+ {
"EventCode": "0x46880",
"EventName": "PM_ISIDE_MRU_TOUCH",
"BriefDescription": "I-side L2 MRU touch sent to L2 for this thread I-side L2 MRU touch commands sent to the L2 for this thread"
},
- {,
+ {
"EventCode": "0x508C",
"EventName": "PM_SHL_CREATED",
"BriefDescription": "Store-Hit-Load Table Entry Created"
},
- {,
+ {
"EventCode": "0x50B8",
"EventName": "PM_TAGE_OVERRIDE_WRONG",
"BriefDescription": "The TAGE overrode BHT direction prediction but it was incorrect. Counted at completion for taken branches only"
},
- {,
+ {
"EventCode": "0x160AE",
"EventName": "PM_L3_P0_PF_RTY",
"BriefDescription": "L3 PF received retry port 0, every retry counted"
},
- {,
+ {
"EventCode": "0x268B2",
"EventName": "PM_L3_LOC_GUESS_WRONG",
"BriefDescription": "Prefetch scope predictor selected LNS, but was wrong"
},
- {,
+ {
"EventCode": "0x36088",
"EventName": "PM_L2_SYS_GUESS_CORRECT",
"BriefDescription": "L2 guess system (VGS or RNS) and guess was correct (ie data beyond-group)"
},
- {,
+ {
"EventCode": "0x260AE",
"EventName": "PM_L3_P2_PF_RTY",
"BriefDescription": "L3 PF received retry port 2, every retry counted"
},
- {,
+ {
"EventCode": "0xD8B0",
"EventName": "PM_PTESYNC",
"BriefDescription": "A ptesync instruction was counted when the instruction is decoded and transmitted"
},
- {,
+ {
"EventCode": "0x26086",
"EventName": "PM_CO_TM_SC_FOOTPRINT",
"BriefDescription": "L2 did a cleanifdirty CO to the L3 (ie created an SC line in the L3) OR L2 TM_store hit dirty HPC line and L3 indicated SC line formed in L3 on RDR bus"
},
- {,
+ {
"EventCode": "0x1E05A",
"EventName": "PM_CMPLU_STALL_ANY_SYNC",
"BriefDescription": "Cycles in which the NTC sync instruction (isync, lwsync or hwsync) is not allowed to complete"
},
- {,
+ {
"EventCode": "0xF090",
"EventName": "PM_LSU0_L1_CAM_CANCEL",
"BriefDescription": "ls0 l1 tm cam cancel"
},
- {,
+ {
"EventCode": "0xC0A8",
"EventName": "PM_LSU_FLUSH_CI",
"BriefDescription": "Load was not issued to LSU as a cache inhibited (non-cacheable) load but it was later determined to be cache inhibited"
},
- {,
+ {
"EventCode": "0x20AC",
"EventName": "PM_TM_FAIL_CONF_TM",
"BriefDescription": "TM aborted because a conflict occurred with another transaction."
},
- {,
+ {
"EventCode": "0x588C",
"EventName": "PM_SHL_ST_DEP_CREATED",
"BriefDescription": "Store-Hit-Load Table Read Hit with entry Enabled"
},
- {,
+ {
"EventCode": "0x46882",
"EventName": "PM_L2_ST_HIT",
"BriefDescription": "All successful D-side store dispatches for this thread that were L2 hits"
},
- {,
+ {
"EventCode": "0x360AC",
"EventName": "PM_L3_SN0_BUSY",
"BriefDescription": "Lifetime, sample of snooper machine 0 valid"
},
- {,
+ {
"EventCode": "0x3005C",
"EventName": "PM_BFU_BUSY",
"BriefDescription": "Cycles in which all 4 Binary Floating Point units are busy. The BFU is running at capacity"
},
- {,
+ {
"EventCode": "0x48A0",
"EventName": "PM_BR_PRED_PCACHE",
"BriefDescription": "Conditional branch completed that used pattern cache prediction"
},
- {,
+ {
"EventCode": "0x26880",
"EventName": "PM_L2_ST_MISS",
"BriefDescription": "All successful D-Side Store dispatches that were an L2 miss for this thread"
},
- {,
+ {
"EventCode": "0xF8B4",
"EventName": "PM_DC_PREF_XCONS_ALLOC",
"BriefDescription": "Prefetch stream allocated in the Ultra conservative phase by either the hardware prefetch mechanism or software prefetch"
},
- {,
+ {
"EventCode": "0x35048",
"EventName": "PM_IPTEG_FROM_DL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a instruction side request"
},
- {,
+ {
"EventCode": "0x260A8",
"EventName": "PM_L3_PF_HIT_L3",
"BriefDescription": "L3 PF hit in L3 (abandoned)"
},
- {,
+ {
"EventCode": "0x360B4",
"EventName": "PM_L3_PF0_BUSY",
"BriefDescription": "Lifetime, sample of PF machine 0 valid"
},
- {,
+ {
"EventCode": "0xC0B0",
"EventName": "PM_LSU_FLUSH_UE",
"BriefDescription": "Correctable ECC error on reload data, reported at critical data forward time"
},
- {,
+ {
"EventCode": "0x4013A",
"EventName": "PM_MRK_IC_MISS",
"BriefDescription": "Marked instruction experienced I cache miss"
},
- {,
+ {
"EventCode": "0x2088",
"EventName": "PM_FLUSH_DISP_SB",
"BriefDescription": "Dispatch Flush: Scoreboard"
},
- {,
+ {
"EventCode": "0x401E8",
"EventName": "PM_MRK_DATA_FROM_L2MISS",
"BriefDescription": "The processor's data cache was reloaded from a location other than the local core's L2 due to a marked load"
},
- {,
+ {
"EventCode": "0x3688E",
"EventName": "PM_TM_ST_CAUSED_FAIL",
"BriefDescription": "TM Store (fav or non-fav) caused another thread to fail"
},
- {,
+ {
"EventCode": "0x460B2",
"EventName": "PM_L3_SYS_GUESS_WRONG",
"BriefDescription": "Prefetch scope predictor selected VGS or RNS, but was wrong"
},
- {,
+ {
"EventCode": "0x58B8",
"EventName": "PM_TAGE_OVERRIDE_WRONG_SPEC",
"BriefDescription": "The TAGE overrode BHT direction prediction and it was correct. Includes taken and not taken and is counted at execution time"
},
- {,
+ {
"EventCode": "0xE890",
"EventName": "PM_LSU3_ERAT_HIT",
"BriefDescription": "Primary ERAT hit. There is no secondary ERAT"
},
- {,
+ {
"EventCode": "0x2898",
"EventName": "PM_TM_TABORT_TRECLAIM",
"BriefDescription": "Completion time tabortnoncd, tabortcd, treclaim"
},
- {,
+ {
"EventCode": "0x268A0",
"EventName": "PM_L3_CO_L31",
"BriefDescription": "L3 CO to L3.1 OR of port 0 and 1 (lossy = may undercount if two cresps come in the same cyc)"
},
- {,
+ {
"EventCode": "0x5080",
"EventName": "PM_THRD_PRIO_4_5_CYC",
"BriefDescription": "Cycles thread running at priority level 4 or 5"
},
- {,
+ {
"EventCode": "0x2505C",
"EventName": "PM_VSU_FIN",
"BriefDescription": "VSU instruction finished. Up to 4 per cycle"
},
- {,
+ {
"EventCode": "0x40A4",
"EventName": "PM_BR_PRED_CCACHE",
"BriefDescription": "Conditional Branch Completed that used the Count Cache for Target Prediction"
},
- {,
+ {
"EventCode": "0x2E04A",
"EventName": "PM_DPTEG_FROM_RL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on the same Node or Group ( Remote) due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4D12E",
"EventName": "PM_MRK_DATA_FROM_DL2L3_MOD_CYC",
"BriefDescription": "Duration in cycles to reload with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked load"
},
- {,
+ {
"EventCode": "0xC8B4",
"EventName": "PM_LSU_FLUSH_LHL_SHL",
"BriefDescription": "The instruction was flushed because of a sequential load/store consistency. If a load or store hits on an older load that has either been snooped (for loads) or has stale data (for stores)."
},
- {,
+ {
"EventCode": "0x58A4",
"EventName": "PM_FLUSH_LSU",
"BriefDescription": "LSU flushes. Includes all lsu flushes"
},
- {,
+ {
"EventCode": "0x1D150",
"EventName": "PM_MRK_DATA_FROM_DL2L3_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked load"
},
- {,
+ {
"EventCode": "0xC8A0",
"EventName": "PM_LSU1_FALSE_LHS",
"BriefDescription": "False LHS match detected"
},
- {,
+ {
"EventCode": "0x48BC",
"EventName": "PM_THRD_PRIO_2_3_CYC",
"BriefDescription": "Cycles thread running at priority level 2 or 3"
},
- {,
+ {
"EventCode": "0x368B2",
"EventName": "PM_L3_GRP_GUESS_WRONG_HIGH",
"BriefDescription": "Prefetch scope predictor selected GS or NNS, but was wrong because scope was VGS or RNS"
},
- {,
+ {
"EventCode": "0xE8BC",
"EventName": "PM_LS1_PTE_TABLEWALK_CYC",
"BriefDescription": "Cycles when a tablewalk is pending on this thread on table 1"
},
- {,
+ {
"EventCode": "0x1F152",
"EventName": "PM_MRK_FAB_RSP_BKILL_CYC",
"BriefDescription": "cycles L2 RC took for a bkill"
},
- {,
+ {
"EventCode": "0x4C124",
"EventName": "PM_MRK_DATA_FROM_L3_NO_CONFLICT_CYC",
"BriefDescription": "Duration in cycles to reload from local core's L3 without conflict due to a marked load"
},
- {,
+ {
"EventCode": "0x2F14A",
"EventName": "PM_MRK_DPTEG_FROM_RL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on the same Node or Group ( Remote) due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x26888",
"EventName": "PM_L2_GRP_GUESS_WRONG",
"BriefDescription": "L2 guess grp (GS or NNS) and guess was not correct (ie data on-chip OR beyond-group)"
},
- {,
+ {
"EventCode": "0xC0AC",
"EventName": "PM_LSU_FLUSH_EMSH",
"BriefDescription": "An ERAT miss was detected after a set-p hit. Erat tracker indicates fail due to tlbmiss and the instruction gets flushed because the instruction was working on the wrong address"
},
- {,
+ {
"EventCode": "0x260B2",
"EventName": "PM_L3_SYS_GUESS_CORRECT",
"BriefDescription": "Prefetch scope predictor selected VGS or RNS and was correct"
},
- {,
+ {
"EventCode": "0x1D146",
"EventName": "PM_MRK_DATA_FROM_MEMORY_CYC",
"BriefDescription": "Duration in cycles to reload from a memory location including L4 from local remote or distant due to a marked load"
},
- {,
+ {
"EventCode": "0xE094",
"EventName": "PM_LSU0_TM_L1_HIT",
"BriefDescription": "Load tm hit in L1"
},
- {,
+ {
"EventCode": "0x46888",
"EventName": "PM_L2_GROUP_PUMP",
"BriefDescription": "RC requests that were on group (aka nodel) pump attempts"
},
- {,
+ {
"EventCode": "0xC08C",
"EventName": "PM_LSU_DTLB_MISS_16M_2M",
"BriefDescription": "Data TLB Miss page size 16M (HPT) or 2M (Radix)"
},
- {,
+ {
"EventCode": "0x16080",
"EventName": "PM_L2_LD",
"BriefDescription": "All successful D-side Load dispatches for this thread (L2 miss + L2 hits)"
},
- {,
+ {
"EventCode": "0x4505C",
"EventName": "PM_MATH_FLOP_CMPL",
"BriefDescription": "Math flop instruction completed"
},
- {,
+ {
"EventCode": "0xC080",
"EventName": "PM_LS0_LD_VECTOR_FIN",
"BriefDescription": "LS0 finished load vector op"
},
- {,
+ {
"EventCode": "0x368B0",
"EventName": "PM_L3_P1_SYS_PUMP",
"BriefDescription": "L3 PF sent with sys scope port 1, counts even retried requests"
},
- {,
+ {
"EventCode": "0x1F146",
"EventName": "PM_MRK_DPTEG_FROM_L31_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L3 on the same chip due to a marked data side request.. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x2000C",
"EventName": "PM_THRD_ALL_RUN_CYC",
"BriefDescription": "Cycles in which all the threads have the run latch set"
},
- {,
+ {
"EventCode": "0xC0BC",
"EventName": "PM_LSU_FLUSH_OTHER",
"BriefDescription": "Other LSU flushes including: Sync (sync ack from L2 caused search of LRQ for oldest snooped load, This will either signal a Precise Flush of the oldest snooped loa or a Flush Next PPC); Data Valid Flush Next (several cases of this, one example is store and reload are lined up such that a store-hit-reload scenario exists and the CDF has already launched and has gotten bad/stale data); Bad Data Valid Flush Next (might be a few cases of this, one example is a larxa (D$ hit) return data and dval but can't allocate to LMQ (LMQ full or other reason). Already gave dval but can't watch it for snoop_hit_larx. Need to take the “bad dval” back and flush all younger ops)"
},
- {,
+ {
"EventCode": "0x5094",
"EventName": "PM_IC_MISS_ICBI",
"BriefDescription": "threaded version, IC Misses where we got EA dir hit but no sector valids were on. ICBI took line out"
},
- {,
+ {
"EventCode": "0xC8A8",
"EventName": "PM_LSU_FLUSH_ATOMIC",
"BriefDescription": "Quad-word loads (lq) are considered atomic because they always span at least 2 slices. If a snoop or store from another thread changes the data the load is accessing between the 2 or 3 pieces of the lq instruction, the lq will be flushed"
},
- {,
+ {
"EventCode": "0x1E04E",
"EventName": "PM_DPTEG_FROM_L2MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a location other than the local core's L2 due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4D05E",
"EventName": "PM_BR_CMPL",
"BriefDescription": "Any Branch instruction completed"
},
- {,
+ {
"EventCode": "0x260B0",
"EventName": "PM_L3_P0_GRP_PUMP",
"BriefDescription": "L3 PF sent with grp scope port 0, counts even retried requests"
},
- {,
+ {
"EventCode": "0x30132",
"EventName": "PM_MRK_VSU_FIN",
"BriefDescription": "VSU marked instr finish"
},
- {,
+ {
"EventCode": "0x2D120",
"EventName": "PM_MRK_DATA_FROM_OFF_CHIP_CACHE",
"BriefDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a marked load"
},
- {,
+ {
"EventCode": "0x1E048",
"EventName": "PM_DPTEG_FROM_ON_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on the same chip due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x16086",
"EventName": "PM_L2_SN_M_WR_DONE",
"BriefDescription": "SNP dispatched for a write and was M (true M); for DMA cacheinj this will pulse if rty/push is required (won't pulse if cacheinj is accepted)"
},
- {,
+ {
"EventCode": "0x489C",
"EventName": "PM_BR_CORECT_PRED_TAKEN_CMPL",
"BriefDescription": "Conditional Branch Completed in which the HW correctly predicted the direction as taken. Counted at completion time"
},
- {,
+ {
"EventCode": "0xF0B8",
"EventName": "PM_LS0_UNALIGNED_ST",
"BriefDescription": "Store instructions whose data crosses a double-word boundary, which causes it to require an additional slice than than what normally would be required of the Store of that size. If the Store wraps from slice 3 to slice 0, thee is an additional 3-cycle penalty"
},
- {,
+ {
"EventCode": "0x20132",
"EventName": "PM_MRK_DFU_FIN",
"BriefDescription": "Decimal Unit marked Instruction Finish"
},
- {,
+ {
"EventCode": "0x160A6",
"EventName": "PM_TM_SC_CO",
"BriefDescription": "L3 castout of line that was StoreCopy (original value of speculatively written line) in a Transaction"
},
- {,
+ {
"EventCode": "0xC8B0",
"EventName": "PM_LSU_FLUSH_LHS",
"BriefDescription": "Effective Address alias flush : no EA match but Real Address match. If the data has not yet been returned for this load, the instruction will just be rejected, but if it has returned data, it will be flushed"
},
- {,
+ {
"EventCode": "0x16084",
"EventName": "PM_L2_RCLD_DISP",
"BriefDescription": "All D-side-Ld or I-side-instruction-fetch dispatch attempts for this thread"
},
- {,
+ {
"EventCode": "0x3F150",
"EventName": "PM_MRK_ST_DRAIN_TO_L2DISP_CYC",
"BriefDescription": "cycles to drain st from core to L2"
},
- {,
+ {
"EventCode": "0x168A4",
"EventName": "PM_L3_MISS",
"BriefDescription": "L3 Misses (L2 miss also missing L3, including data/instrn/xlate)"
},
- {,
+ {
"EventCode": "0xF080",
"EventName": "PM_LSU_STCX_FAIL",
"BriefDescription": "The LSU detects the condition that a stcx instruction failed. No requirement to wait for a response from the nest"
},
- {,
+ {
"EventCode": "0x30038",
"EventName": "PM_CMPLU_STALL_DMISS_LMEM",
"BriefDescription": "Completion stall due to cache miss that resolves in local memory"
},
- {,
+ {
"EventCode": "0x28A4",
"EventName": "PM_MRK_TEND_FAIL",
"BriefDescription": "Nested or not nested tend failed for a marked tend instruction"
},
- {,
+ {
"EventCode": "0x100FC",
"EventName": "PM_LD_REF_L1",
"BriefDescription": "All L1 D cache load references counted at finish, gated by reject"
},
- {,
+ {
"EventCode": "0xC0A0",
"EventName": "PM_LSU0_FALSE_LHS",
"BriefDescription": "False LHS match detected"
},
- {,
+ {
"EventCode": "0x468A8",
"EventName": "PM_SN_MISS",
"BriefDescription": "Any port snooper L3 miss or collision. Up to 4 can happen in a cycle but we only count 1"
},
- {,
+ {
"EventCode": "0x36888",
"EventName": "PM_L2_SYS_GUESS_WRONG",
"BriefDescription": "L2 guess system (VGS or RNS) and guess was not correct (ie data ^beyond-group)"
},
- {,
+ {
"EventCode": "0x2080",
"EventName": "PM_EE_OFF_EXT_INT",
"BriefDescription": "CyclesMSR[EE] is off and external interrupts are active"
},
- {,
+ {
"EventCode": "0xE8B8",
"EventName": "PM_LS3_TM_DISALLOW",
"BriefDescription": "A TM-ineligible instruction tries to execute inside a transaction and the LSU disallows it"
},
- {,
+ {
"EventCode": "0x2688E",
"EventName": "PM_TM_FAV_CAUSED_FAIL",
"BriefDescription": "TM Load (fav) caused another thread to fail"
},
- {,
+ {
"EventCode": "0x16090",
"EventName": "PM_SN0_BUSY",
"BriefDescription": "SN mach 0 Busy. Used by PMU to sample ave SN lifetime (mach0 used as sample point)"
},
- {,
+ {
"EventCode": "0x360AE",
"EventName": "PM_L3_P0_CO_RTY",
"BriefDescription": "L3 CO received retry port 0 (memory only), every retry counted"
},
- {,
+ {
"EventCode": "0x168A8",
"EventName": "PM_L3_WI_USAGE",
"BriefDescription": "Lifetime, sample of Write Inject machine 0 valid"
},
- {,
+ {
"EventCode": "0x468A2",
"EventName": "PM_L3_LAT_CI_MISS",
"BriefDescription": "L3 Lateral Castins Miss"
},
- {,
+ {
"EventCode": "0x4090",
"EventName": "PM_IC_PREF_CANCEL_PAGE",
"BriefDescription": "Prefetch Canceled due to page boundary"
},
- {,
+ {
"EventCode": "0x460AA",
"EventName": "PM_L3_P0_CO_L31",
"BriefDescription": "L3 CO to L3.1 (LCO) port 0 with or without data"
},
- {,
+ {
"EventCode": "0x2880",
"EventName": "PM_FLUSH_DISP",
"BriefDescription": "Dispatch flush"
},
- {,
+ {
"EventCode": "0x168AE",
"EventName": "PM_L3_P1_PF_RTY",
"BriefDescription": "L3 PF received retry port 1, every retry counted"
},
- {,
+ {
"EventCode": "0x46082",
"EventName": "PM_L2_ST_DISP",
"BriefDescription": "All successful D-side store dispatches for this thread"
},
- {,
+ {
"EventCode": "0x36880",
"EventName": "PM_L2_INST_MISS",
"BriefDescription": "All successful I-side-instruction-fetch (e.g. i-demand, i-prefetch) dispatches for this thread that were an L2 miss"
},
- {,
+ {
"EventCode": "0xE084",
"EventName": "PM_LS0_ERAT_MISS_PREF",
"BriefDescription": "LS0 Erat miss due to prefetch"
},
- {,
+ {
"EventCode": "0x409C",
"EventName": "PM_BR_PRED",
"BriefDescription": "Conditional Branch Executed in which the HW predicted the Direction or Target. Includes taken and not taken and is counted at execution time"
},
- {,
+ {
"EventCode": "0x2D144",
"EventName": "PM_MRK_DATA_FROM_L31_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L3 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0x360A4",
"EventName": "PM_L3_CO_LCO",
"BriefDescription": "Total L3 COs occurred on LCO L3.1 (good cresp, may end up in mem on a retry)"
},
- {,
+ {
"EventCode": "0x4890",
"EventName": "PM_IC_PREF_CANCEL_HIT",
"BriefDescription": "Prefetch Canceled due to icache hit"
},
- {,
+ {
"EventCode": "0x268A8",
"EventName": "PM_RD_HIT_PF",
"BriefDescription": "RD machine hit L3 PF machine"
},
- {,
+ {
"EventCode": "0x16880",
"EventName": "PM_L2_ST",
"BriefDescription": "All successful D-side store dispatches for this thread (L2 miss + L2 hits)"
},
- {,
+ {
"EventCode": "0x4098",
"EventName": "PM_IC_DEMAND_L2_BHT_REDIRECT",
"BriefDescription": "L2 I cache demand request due to BHT redirect, branch redirect ( 2 bubbles 3 cycles)"
},
- {,
+ {
"EventCode": "0xD0B4",
"EventName": "PM_LSU0_SRQ_S0_VALID_CYC",
"BriefDescription": "Slot 0 of SRQ valid"
},
- {,
+ {
"EventCode": "0x160AA",
"EventName": "PM_L3_P0_LCO_NO_DATA",
"BriefDescription": "Dataless L3 LCO sent port 0"
},
- {,
+ {
"EventCode": "0x208C",
"EventName": "PM_CLB_HELD",
"BriefDescription": "CLB (control logic block - indicates quadword fetch block) Hold: Any Reason"
},
- {,
+ {
"EventCode": "0xF88C",
"EventName": "PM_LSU3_STORE_REJECT",
"BriefDescription": "All internal store rejects cause the instruction to go back to the SRQ and go to sleep until woken up to try again after the condition has been met"
},
- {,
+ {
"EventCode": "0x200F2",
"EventName": "PM_INST_DISP",
"BriefDescription": "# PPC Dispatched"
},
- {,
+ {
"EventCode": "0x4E05E",
"EventName": "PM_TM_OUTER_TBEGIN_DISP",
"BriefDescription": "Number of outer tbegin instructions dispatched. The dispatch unit determines whether the tbegin instruction is outer or nested. This is a speculative count, which includes flushed instructions"
},
- {,
+ {
"EventCode": "0x2D018",
"EventName": "PM_CMPLU_STALL_EXEC_UNIT",
"BriefDescription": "Completion stall due to execution units (FXU/VSU/CRU)"
},
- {,
+ {
"EventCode": "0x20B0",
"EventName": "PM_LSU_FLUSH_NEXT",
"BriefDescription": "LSU flush next reported at flush time. Sometimes these also come with an exception"
},
- {,
+ {
"EventCode": "0x3880",
"EventName": "PM_ISU2_ISS_HOLD_ALL",
"BriefDescription": "All ISU rejects"
},
- {,
+ {
"EventCode": "0xC884",
"EventName": "PM_LS3_LD_VECTOR_FIN",
"BriefDescription": "LS3 finished load vector op"
},
- {,
+ {
"EventCode": "0x360A8",
"EventName": "PM_L3_CO",
"BriefDescription": "L3 castout occurring (does not include casthrough or log writes (cinj/dmaw))"
},
- {,
+ {
"EventCode": "0x368A4",
"EventName": "PM_L3_CINJ",
"BriefDescription": "L3 castin of cache inject"
},
- {,
+ {
"EventCode": "0xC890",
"EventName": "PM_LSU_NCST",
"BriefDescription": "Asserts when a i=1 store op is sent to the nest. No record of issue pipe (LS0/LS1) is maintained so this is for both pipes. Probably don't need separate LS0 and LS1"
},
- {,
+ {
"EventCode": "0xD0B8",
"EventName": "PM_LSU_LMQ_FULL_CYC",
"BriefDescription": "Counts the number of cycles the LMQ is full"
},
- {,
+ {
"EventCode": "0x168B2",
"EventName": "PM_L3_GRP_GUESS_CORRECT",
"BriefDescription": "Prefetch scope predictor selected GS or NNS and was correct"
},
- {,
+ {
"EventCode": "0x48A4",
"EventName": "PM_STOP_FETCH_PENDING_CYC",
"BriefDescription": "Fetching is stopped due to an incoming instruction that will result in a flush"
},
- {,
+ {
"EventCode": "0x36884",
"EventName": "PM_L2_RCST_DISP_FAIL_ADDR",
"BriefDescription": "All D-side store dispatch attempts for this thread that failed due to address collision with RC/CO/SN/SQ"
},
- {,
+ {
"EventCode": "0x260AC",
"EventName": "PM_L3_PF_USAGE",
"BriefDescription": "Rotating sample of 32 PF actives"
diff --git a/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json b/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json
index b4772f54a271..d0265f255de2 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json
@@ -1,530 +1,530 @@
[
- {,
+ {
"EventCode": "0x4D04C",
"EventName": "PM_DFU_BUSY",
"BriefDescription": "Cycles in which all 4 Decimal Floating Point units are busy. The DFU is running at capacity"
},
- {,
+ {
"EventCode": "0x100F6",
"EventName": "PM_IERAT_RELOAD",
"BriefDescription": "Number of I-ERAT reloads"
},
- {,
+ {
"EventCode": "0x201E2",
"EventName": "PM_MRK_LD_MISS_L1",
"BriefDescription": "Marked DL1 Demand Miss counted at exec time. Note that this count is per slice, so if a load spans multiple slices this event will increment multiple times for a single load."
},
- {,
+ {
"EventCode": "0x40010",
"EventName": "PM_PMC3_OVERFLOW",
"BriefDescription": "Overflow from counter 3"
},
- {,
+ {
"EventCode": "0x1005A",
"EventName": "PM_CMPLU_STALL_DFLONG",
"BriefDescription": "Finish stall because the NTF instruction was a multi-cycle instruction issued to the Decimal Floating Point execution pipe and waiting to finish. Includes decimal floating point instructions + 128 bit binary floating point instructions. Qualified by multicycle"
},
- {,
+ {
"EventCode": "0x4D140",
"EventName": "PM_MRK_DATA_FROM_ON_CHIP_CACHE",
"BriefDescription": "The processor's data cache was reloaded either shared or modified data from another core's L2/L3 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0x3F14C",
"EventName": "PM_MRK_DPTEG_FROM_DL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on a different Node or Group (Distant) due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x1E040",
"EventName": "PM_DPTEG_FROM_L2_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 without conflict due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x24052",
"EventName": "PM_FXU_IDLE",
"BriefDescription": "Cycles in which FXU0, FXU1, FXU2, and FXU3 are all idle"
},
- {,
+ {
"EventCode": "0x1E054",
"EventName": "PM_CMPLU_STALL",
"BriefDescription": "Nothing completed and ICT not empty"
},
- {,
+ {
"EventCode": "0x2",
"EventName": "PM_INST_CMPL",
"BriefDescription": "Number of PowerPC Instructions that completed."
},
- {,
+ {
"EventCode": "0x3D058",
"EventName": "PM_VSU_DP_FSQRT_FDIV",
"BriefDescription": "vector versions of fdiv,fsqrt"
},
- {,
+ {
"EventCode": "0x10006",
"EventName": "PM_DISP_HELD",
"BriefDescription": "Dispatch Held"
},
- {,
+ {
"EventCode": "0x200F8",
"EventName": "PM_EXT_INT",
"BriefDescription": "external interrupt"
},
- {,
+ {
"EventCode": "0x20008",
"EventName": "PM_ICT_EMPTY_CYC",
"BriefDescription": "Cycles in which the ICT is completely empty. No itags are assigned to any thread"
},
- {,
+ {
"EventCode": "0x4F146",
"EventName": "PM_MRK_DPTEG_FROM_L21_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L2 on the same chip due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x10056",
"EventName": "PM_MEM_READ",
"BriefDescription": "Reads from Memory from this thread (includes data/inst/xlate/l1prefetch/inst prefetch). Includes L4"
},
- {,
+ {
"EventCode": "0x3C04C",
"EventName": "PM_DATA_FROM_DL4",
"BriefDescription": "The processor's data cache was reloaded from another chip's L4 on a different Node or Group (Distant) due to a demand load"
},
- {,
+ {
"EventCode": "0x4E046",
"EventName": "PM_DPTEG_FROM_L21_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L2 on the same chip due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x2E016",
"EventName": "PM_NTC_ISSUE_HELD_ARB",
"BriefDescription": "The NTC instruction is being held at dispatch because it lost arbitration onto the issue pipe to another instruction (from the same thread or a different thread)"
},
- {,
+ {
"EventCode": "0x15156",
"EventName": "PM_SYNC_MRK_FX_DIVIDE",
"BriefDescription": "Marked fixed point divide that can cause a synchronous interrupt"
},
- {,
+ {
"EventCode": "0x1C056",
"EventName": "PM_DERAT_MISS_4K",
"BriefDescription": "Data ERAT Miss (Data TLB Access) page size 4K"
},
- {,
+ {
"EventCode": "0x2F142",
"EventName": "PM_MRK_DPTEG_FROM_L3_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without dispatch conflicts hit on Mepf state. due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4C15C",
"EventName": "PM_MRK_DERAT_MISS_16G_1G",
"BriefDescription": "Marked Data ERAT Miss (Data TLB Access) page size 16G (hpt mode) and 1G (radix mode)"
},
- {,
+ {
"EventCode": "0x10024",
"EventName": "PM_PMC5_OVERFLOW",
"BriefDescription": "Overflow from counter 5"
},
- {,
+ {
"EventCode": "0x4505E",
"EventName": "PM_FLOP_CMPL",
"BriefDescription": "Floating Point Operation Finished"
},
- {,
+ {
"EventCode": "0x2C018",
"EventName": "PM_CMPLU_STALL_DMISS_L21_L31",
"BriefDescription": "Completion stall by Dcache miss which resolved on chip ( excluding local L2/L3)"
},
- {,
+ {
"EventCode": "0x4006A",
"EventName": "PM_IERAT_RELOAD_16M",
"BriefDescription": "IERAT Reloaded (Miss) for a 16M page"
},
- {,
+ {
"EventCode": "0x4E010",
"EventName": "PM_ICT_NOSLOT_IC_L3MISS",
"BriefDescription": "Ict empty for this thread due to icache misses that were sourced from beyond the local L3. The source could be local/remote/distant memory or another core's cache"
},
- {,
+ {
"EventCode": "0x4D01C",
"EventName": "PM_ICT_NOSLOT_DISP_HELD_SYNC",
"BriefDescription": "Dispatch held due to a synchronizing instruction at dispatch"
},
- {,
+ {
"EventCode": "0x2D01A",
"EventName": "PM_ICT_NOSLOT_IC_MISS",
"BriefDescription": "Ict empty for this thread due to Icache Miss"
},
- {,
+ {
"EventCode": "0x4F14A",
"EventName": "PM_MRK_DPTEG_FROM_OFF_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x30058",
"EventName": "PM_TLBIE_FIN",
"BriefDescription": "tlbie finished"
},
- {,
+ {
"EventCode": "0x100F8",
"EventName": "PM_ICT_NOSLOT_CYC",
"BriefDescription": "Number of cycles the ICT has no itags assigned to this thread"
},
- {,
+ {
"EventCode": "0x3E042",
"EventName": "PM_DPTEG_FROM_L3_DISP_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 with dispatch conflict due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x1F140",
"EventName": "PM_MRK_DPTEG_FROM_L2_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 without conflict due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x1F058",
"EventName": "PM_RADIX_PWC_L2_PTE_FROM_L2",
"BriefDescription": "A Page Table Entry was reloaded to a level 2 page walk cache from the core's L2 data cache. This implies that level 3 and level 4 PWC accesses were not necessary for this translation"
},
- {,
+ {
"EventCode": "0x1D14A",
"EventName": "PM_MRK_DATA_FROM_RL2L3_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked load"
},
- {,
+ {
"EventCode": "0x10050",
"EventName": "PM_CHIP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was chip pump (prediction=correct) for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x45058",
"EventName": "PM_IC_MISS_CMPL",
"BriefDescription": "Non-speculative icache miss, counted at completion"
},
- {,
+ {
"EventCode": "0x2D150",
"EventName": "PM_MRK_DERAT_MISS_4K",
"BriefDescription": "Marked Data ERAT Miss (Data TLB Access) page size 4K"
},
- {,
+ {
"EventCode": "0x34058",
"EventName": "PM_ICT_NOSLOT_BR_MPRED_ICMISS",
"BriefDescription": "Ict empty for this thread due to Icache Miss and branch mispred"
},
- {,
+ {
"EventCode": "0x10022",
"EventName": "PM_PMC2_SAVED",
"BriefDescription": "PMC2 Rewind Value saved"
},
- {,
+ {
"EventCode": "0x2000A",
"EventName": "PM_HV_CYC",
"BriefDescription": "Cycles in which msr_hv is high. Note that this event does not take msr_pr into consideration"
},
- {,
+ {
"EventCode": "0x1F144",
"EventName": "PM_MRK_DPTEG_FROM_L3_NO_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without conflict due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x300FC",
"EventName": "PM_DTLB_MISS",
"BriefDescription": "Data PTEG reload"
},
- {,
+ {
"EventCode": "0x2C046",
"EventName": "PM_DATA_FROM_RL2L3_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a demand load"
},
- {,
+ {
"EventCode": "0x20052",
"EventName": "PM_GRP_PUMP_MPRED",
"BriefDescription": "Final Pump Scope (Group) ended up either larger or smaller than Initial Pump Scope for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x3F05A",
"EventName": "PM_RADIX_PWC_L2_PDE_FROM_L3",
"BriefDescription": "A Page Directory Entry was reloaded to a level 2 page walk cache from the core's L3 data cache"
},
- {,
+ {
"EventCode": "0x1E04A",
"EventName": "PM_DPTEG_FROM_RL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x10064",
"EventName": "PM_ICT_NOSLOT_DISP_HELD_TBEGIN",
"BriefDescription": "the NTC instruction is being held at dispatch because it is a tbegin instruction and there is an older tbegin in the pipeline that must complete before the younger tbegin can dispatch"
},
- {,
+ {
"EventCode": "0x2E046",
"EventName": "PM_DPTEG_FROM_RL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4F14C",
"EventName": "PM_MRK_DPTEG_FROM_DMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group (Distant) due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x2E042",
"EventName": "PM_DPTEG_FROM_L3_MEPF",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 without dispatch conflicts hit on Mepf state. due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x2D012",
"EventName": "PM_CMPLU_STALL_DFU",
"BriefDescription": "Finish stall because the NTF instruction was issued to the Decimal Floating Point execution pipe and waiting to finish. Includes decimal floating point instructions + 128 bit binary floating point instructions. Not qualified by multicycle"
},
- {,
+ {
"EventCode": "0x3C054",
"EventName": "PM_DERAT_MISS_16M_2M",
"BriefDescription": "Data ERAT Miss (Data TLB Access) page size 16M (HPT mode) or 2M (Radix mode)"
},
- {,
+ {
"EventCode": "0x4C04C",
"EventName": "PM_DATA_FROM_DMEM",
"BriefDescription": "The processor's data cache was reloaded from another chip's memory on the same Node or Group (Distant) due to a demand load"
},
- {,
+ {
"EventCode": "0x30022",
"EventName": "PM_PMC4_SAVED",
"BriefDescription": "PMC4 Rewind Value saved (matched condition)"
},
- {,
+ {
"EventCode": "0x200F4",
"EventName": "PM_RUN_CYC",
"BriefDescription": "Run_cycles"
},
- {,
+ {
"EventCode": "0x400F2",
"EventName": "PM_1PLUS_PPC_DISP",
"BriefDescription": "Cycles at least one Instr Dispatched"
},
- {,
+ {
"EventCode": "0x3D148",
"EventName": "PM_MRK_DATA_FROM_L21_MOD_CYC",
"BriefDescription": "Duration in cycles to reload with Modified (M) data from another core's L2 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0x2F146",
"EventName": "PM_MRK_DPTEG_FROM_RL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4E01A",
"EventName": "PM_ICT_NOSLOT_DISP_HELD",
"BriefDescription": "Cycles in which the NTC instruction is held at dispatch for any reason"
},
- {,
+ {
"EventCode": "0x401EC",
"EventName": "PM_THRESH_EXC_2048",
"BriefDescription": "Threshold counter exceeded a value of 2048"
},
- {,
+ {
"EventCode": "0x35150",
"EventName": "PM_MRK_DATA_FROM_RL2L3_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked load"
},
- {,
+ {
"EventCode": "0x3E052",
"EventName": "PM_ICT_NOSLOT_IC_L3",
"BriefDescription": "Ict empty for this thread due to icache misses that were sourced from the local L3"
},
- {,
+ {
"EventCode": "0x2405A",
"EventName": "PM_NTC_FIN",
"BriefDescription": "Cycles in which the oldest instruction in the pipeline (NTC) finishes. This event is used to account for cycles in which work is being completed in the CPI stack"
},
- {,
+ {
"EventCode": "0x40052",
"EventName": "PM_PUMP_MPRED",
"BriefDescription": "Pump misprediction. Counts across all types of pumps for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x30056",
"EventName": "PM_TM_ABORTS",
"BriefDescription": "Number of TM transactions aborted"
},
- {,
+ {
"EventCode": "0x2404C",
"EventName": "PM_INST_FROM_MEMORY",
"BriefDescription": "The processor's Instruction cache was reloaded from a memory location including L4 from local remote or distant due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x30024",
"EventName": "PM_PMC6_OVERFLOW",
"BriefDescription": "Overflow from counter 6"
},
- {,
+ {
"EventCode": "0x10068",
"EventName": "PM_BRU_FIN",
"BriefDescription": "Branch Instruction Finished"
},
- {,
+ {
"EventCode": "0x3D154",
"EventName": "PM_MRK_DERAT_MISS_16M_2M",
"BriefDescription": "Marked Data ERAT Miss (Data TLB Access) page size 16M (hpt mode) or 2M (radix mode)"
},
- {,
+ {
"EventCode": "0x30020",
"EventName": "PM_PMC2_REWIND",
"BriefDescription": "PMC2 Rewind Event (did not match condition)"
},
- {,
+ {
"EventCode": "0x40064",
"EventName": "PM_DUMMY2_REMOVE_ME",
"BriefDescription": "Space holder for LS_PC_RELOAD_RA"
},
- {,
+ {
"EventCode": "0x3F148",
"EventName": "PM_MRK_DPTEG_FROM_DL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4D01E",
"EventName": "PM_ICT_NOSLOT_BR_MPRED",
"BriefDescription": "Ict empty for this thread due to branch mispred"
},
- {,
+ {
"EventCode": "0x1F148",
"EventName": "PM_MRK_DPTEG_FROM_ON_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on the same chip due to a marked data side request.. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x3E046",
"EventName": "PM_DPTEG_FROM_L21_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L2 on the same chip due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x2F144",
"EventName": "PM_MRK_DPTEG_FROM_L31_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another core's L3 on the same chip due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x14052",
"EventName": "PM_INST_GRP_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (Group) ended up larger than Initial Pump Scope (Chip) for an instruction fetch"
},
- {,
+ {
"EventCode": "0xD0A8",
"EventName": "PM_DSLB_MISS",
"BriefDescription": "gate_and(sd_pc_c0_comp_valid AND sd_pc_c0_comp_thread(0:1)=tid,sd_pc_c0_comp_ppc_count(0:3)) + gate_and(sd_pc_c1_comp_valid AND sd_pc_c1_comp_thread(0:1)=tid,sd_pc_c1_comp_ppc_count(0:3))"
},
- {,
+ {
"EventCode": "0x4C058",
"EventName": "PM_MEM_CO",
"BriefDescription": "Memory castouts from this thread"
},
- {,
+ {
"EventCode": "0x40004",
"EventName": "PM_FXU_FIN",
"BriefDescription": "The fixed point unit Unit finished an instruction. Instructions that finish may not necessary complete."
},
- {,
+ {
"EventCode": "0x2C054",
"EventName": "PM_DERAT_MISS_64K",
"BriefDescription": "Data ERAT Miss (Data TLB Access) page size 64K"
},
- {,
+ {
"EventCode": "0x10018",
"EventName": "PM_IC_DEMAND_CYC",
"BriefDescription": "Icache miss demand cycles"
},
- {,
+ {
"EventCode": "0x2D14E",
"EventName": "PM_MRK_DATA_FROM_L21_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L2 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0x3405C",
"EventName": "PM_CMPLU_STALL_DPLONG",
"BriefDescription": "Finish stall because the NTF instruction was a scalar multi-cycle instruction issued to the Double Precision execution pipe and waiting to finish. Includes binary floating point instructions in 32 and 64 bit binary floating point format. Qualified by NOT vector AND multicycle"
},
- {,
+ {
"EventCode": "0x4D052",
"EventName": "PM_2FLOP_CMPL",
"BriefDescription": "DP vector version of fmul, fsub, fcmp, fsel, fabs, fnabs, fres ,fsqrte, fneg "
},
- {,
+ {
"EventCode": "0x1F142",
"EventName": "PM_MRK_DPTEG_FROM_L2",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L2 due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x40062",
"EventName": "PM_DUMMY1_REMOVE_ME",
"BriefDescription": "Space holder for L2_PC_PM_MK_LDST_SCOPE_PRED_STATUS"
},
- {,
+ {
"EventCode": "0x4C012",
"EventName": "PM_CMPLU_STALL_ERAT_MISS",
"BriefDescription": "Finish stall because the NTF instruction was a load or store that suffered a translation miss"
},
- {,
+ {
"EventCode": "0x4D050",
"EventName": "PM_VSU_NON_FLOP_CMPL",
"BriefDescription": "Non FLOP operation completed"
},
- {,
+ {
"EventCode": "0x2E012",
"EventName": "PM_TM_TX_PASS_RUN_CYC",
"BriefDescription": "cycles spent in successful transactions"
},
- {,
+ {
"EventCode": "0x4D04E",
"EventName": "PM_VSU_FSQRT_FDIV",
"BriefDescription": "four flops operation (fdiv,fsqrt) Scalar Instructions only"
},
- {,
+ {
"EventCode": "0x4C120",
"EventName": "PM_MRK_DATA_FROM_L2_MEPF",
"BriefDescription": "The processor's data cache was reloaded from local core's L2 hit without dispatch conflicts on Mepf state. due to a marked load"
},
- {,
+ {
"EventCode": "0x10062",
"EventName": "PM_LD_L3MISS_PEND_CYC",
"BriefDescription": "Cycles L3 miss was pending for this thread"
},
- {,
+ {
"EventCode": "0x2F14C",
"EventName": "PM_MRK_DPTEG_FROM_MEMORY",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a memory location including L4 from local remote or distant due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x14050",
"EventName": "PM_INST_CHIP_PUMP_CPRED",
"BriefDescription": "Initial and Final Pump Scope was chip pump (prediction=correct) for an instruction fetch"
},
- {,
+ {
"EventCode": "0x2000E",
"EventName": "PM_FXU_BUSY",
"BriefDescription": "Cycles in which all 4 FXUs are busy. The FXU is running at capacity"
},
- {,
+ {
"EventCode": "0x20066",
"EventName": "PM_TLB_MISS",
"BriefDescription": "TLB Miss (I + D)"
},
- {,
+ {
"EventCode": "0x10054",
"EventName": "PM_PUMP_CPRED",
"BriefDescription": "Pump prediction correct. Counts across all types of pumps for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x4D124",
"EventName": "PM_MRK_DATA_FROM_L31_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L3 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0x400F8",
"EventName": "PM_FLUSH",
"BriefDescription": "Flush (any type)"
},
- {,
+ {
"EventCode": "0x30004",
"EventName": "PM_CMPLU_STALL_EMQ_FULL",
"BriefDescription": "Finish stall because the next to finish instruction suffered an ERAT miss and the EMQ was full"
},
- {,
+ {
"EventCode": "0x1D154",
"EventName": "PM_MRK_DATA_FROM_L21_SHR_CYC",
"BriefDescription": "Duration in cycles to reload with Shared (S) data from another core's L2 on the same chip due to a marked load"
diff --git a/tools/perf/pmu-events/arch/powerpc/power9/pmc.json b/tools/perf/pmu-events/arch/powerpc/power9/pmc.json
index 8b3b0f3be664..9edab15cc447 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/pmc.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/pmc.json
@@ -1,117 +1,117 @@
[
- {,
+ {
"EventCode": "0x20036",
"EventName": "PM_BR_2PATH",
"BriefDescription": "Branches that are not strongly biased"
},
- {,
+ {
"EventCode": "0x40056",
"EventName": "PM_MEM_LOC_THRESH_LSU_HIGH",
"BriefDescription": "Local memory above threshold for LSU medium"
},
- {,
+ {
"EventCode": "0x40118",
"EventName": "PM_MRK_DCACHE_RELOAD_INTV",
"BriefDescription": "Combined Intervention event"
},
- {,
+ {
"EventCode": "0x4F148",
"EventName": "PM_MRK_DPTEG_FROM_DL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x301E8",
"EventName": "PM_THRESH_EXC_64",
"BriefDescription": "Threshold counter exceeded a value of 64"
},
- {,
+ {
"EventCode": "0x4E04E",
"EventName": "PM_DPTEG_FROM_L3MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a location other than the local core's L3 due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x40050",
"EventName": "PM_SYS_PUMP_MPRED_RTY",
"BriefDescription": "Final Pump Scope (system) ended up larger than Initial Pump Scope (Chip/Group) for all data types excluding data prefetch (demand load,inst prefetch,inst fetch,xlate)"
},
- {,
+ {
"EventCode": "0x1F14E",
"EventName": "PM_MRK_DPTEG_FROM_L2MISS",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a location other than the local core's L2 due to a marked data side request.. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4D018",
"EventName": "PM_CMPLU_STALL_BRU",
"BriefDescription": "Completion stall due to a Branch Unit"
},
- {,
+ {
"EventCode": "0x45052",
"EventName": "PM_4FLOP_CMPL",
"BriefDescription": "4 FLOP instruction completed"
},
- {,
+ {
"EventCode": "0x3D142",
"EventName": "PM_MRK_DATA_FROM_LMEM",
"BriefDescription": "The processor's data cache was reloaded from the local chip's Memory due to a marked load"
},
- {,
+ {
"EventCode": "0x4C01E",
"EventName": "PM_CMPLU_STALL_CRYPTO",
"BriefDescription": "Finish stall because the NTF instruction was routed to the crypto execution pipe and was waiting to finish"
},
- {,
+ {
"EventCode": "0x3000C",
"EventName": "PM_FREQ_DOWN",
"BriefDescription": "Power Management: Below Threshold B"
},
- {,
+ {
"EventCode": "0x4D128",
"EventName": "PM_MRK_DATA_FROM_LMEM_CYC",
"BriefDescription": "Duration in cycles to reload from the local chip's Memory due to a marked load"
},
- {,
+ {
"EventCode": "0x4D054",
"EventName": "PM_8FLOP_CMPL",
"BriefDescription": "8 FLOP instruction completed"
},
- {,
+ {
"EventCode": "0x10026",
"EventName": "PM_TABLEWALK_CYC",
"BriefDescription": "Cycles when an instruction tablewalk is active"
},
- {,
+ {
"EventCode": "0x2C012",
"EventName": "PM_CMPLU_STALL_DCACHE_MISS",
"BriefDescription": "Finish stall because the NTF instruction was a load that missed the L1 and was waiting for the data to return from the nest"
},
- {,
+ {
"EventCode": "0x2E04C",
"EventName": "PM_DPTEG_FROM_MEMORY",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a memory location including L4 from local remote or distant due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x3F142",
"EventName": "PM_MRK_DPTEG_FROM_L3_DISP_CONFLICT",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 with dispatch conflict due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x4F142",
"EventName": "PM_MRK_DPTEG_FROM_L3",
"BriefDescription": "A Page Table Entry was loaded into the TLB from local core's L3 due to a marked data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x10060",
"EventName": "PM_TM_TRANS_RUN_CYC",
"BriefDescription": "run cycles in transactional state"
},
- {,
+ {
"EventCode": "0x1E04C",
"EventName": "PM_DPTEG_FROM_LL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from the local chip's L4 cache due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x45050",
"EventName": "PM_1FLOP_CMPL",
"BriefDescription": "one flop (fadd, fmul, fsub, fcmp, fsel, fabs, fnabs, fres, fsqrte, fneg) operation completed"
}
-]
\ No newline at end of file
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power9/translation.json b/tools/perf/pmu-events/arch/powerpc/power9/translation.json
index b27642676244..2360b5afec6b 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/translation.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/translation.json
@@ -1,227 +1,227 @@
[
- {,
+ {
"EventCode": "0x1E",
"EventName": "PM_CYC",
"BriefDescription": "Processor cycles"
},
- {,
+ {
"EventCode": "0x30010",
"EventName": "PM_PMC2_OVERFLOW",
"BriefDescription": "Overflow from counter 2"
},
- {,
+ {
"EventCode": "0x3C046",
"EventName": "PM_DATA_FROM_L21_SHR",
"BriefDescription": "The processor's data cache was reloaded with Shared (S) data from another core's L2 on the same chip due to a demand load"
},
- {,
+ {
"EventCode": "0x4D05C",
"EventName": "PM_DP_QP_FLOP_CMPL",
"BriefDescription": "Double-Precion or Quad-Precision instruction completed"
},
- {,
+ {
"EventCode": "0x4E04C",
"EventName": "PM_DPTEG_FROM_DMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group (Distant) due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x20016",
"EventName": "PM_ST_FIN",
"BriefDescription": "Store finish count. Includes speculative activity"
},
- {,
+ {
"EventCode": "0x1504A",
"EventName": "PM_IPTEG_FROM_RL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a instruction side request"
},
- {,
+ {
"EventCode": "0x40132",
"EventName": "PM_MRK_LSU_FIN",
"BriefDescription": "lsu marked instr PPC finish"
},
- {,
+ {
"EventCode": "0x3C05C",
"EventName": "PM_CMPLU_STALL_VFXU",
"BriefDescription": "Finish stall due to a vector fixed point instruction in the execution pipeline. These instructions get routed to the ALU, ALU2, and DIV pipes"
},
- {,
+ {
"EventCode": "0x30066",
"EventName": "PM_LSU_FIN",
"BriefDescription": "LSU Finished a PPC instruction (up to 4 per cycle)"
},
- {,
+ {
"EventCode": "0x2011C",
"EventName": "PM_MRK_NTC_CYC",
"BriefDescription": "Cycles during which the marked instruction is next to complete (completion is held up because the marked instruction hasn't completed yet)"
},
- {,
+ {
"EventCode": "0x3E048",
"EventName": "PM_DPTEG_FROM_DL2L3_SHR",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x2E018",
"EventName": "PM_CMPLU_STALL_VFXLONG",
"BriefDescription": "Completion stall due to a long latency vector fixed point instruction (division, square root)"
},
- {,
+ {
"EventCode": "0x1C04E",
"EventName": "PM_DATA_FROM_L2MISS_MOD",
"BriefDescription": "The processor's data cache was reloaded from a location other than the local core's L2 due to a demand load"
},
- {,
+ {
"EventCode": "0x15048",
"EventName": "PM_IPTEG_FROM_ON_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on the same chip due to a instruction side request"
},
- {,
+ {
"EventCode": "0x34046",
"EventName": "PM_INST_FROM_L21_SHR",
"BriefDescription": "The processor's Instruction cache was reloaded with Shared (S) data from another core's L2 on the same chip due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x1E058",
"EventName": "PM_STCX_FAIL",
"BriefDescription": "stcx failed"
},
- {,
+ {
"EventCode": "0x300F0",
"EventName": "PM_ST_MISS_L1",
"BriefDescription": "Store Missed L1"
},
- {,
+ {
"EventCode": "0x4C046",
"EventName": "PM_DATA_FROM_L21_MOD",
"BriefDescription": "The processor's data cache was reloaded with Modified (M) data from another core's L2 on the same chip due to a demand load"
},
- {,
+ {
"EventCode": "0x2504A",
"EventName": "PM_IPTEG_FROM_RL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on the same Node or Group ( Remote) due to a instruction side request"
},
- {,
+ {
"EventCode": "0x2003E",
"EventName": "PM_LSU_LMQ_SRQ_EMPTY_CYC",
"BriefDescription": "Cycles in which the LSU is empty for all threads (lmq and srq are completely empty)"
},
- {,
+ {
"EventCode": "0x201E6",
"EventName": "PM_THRESH_EXC_32",
"BriefDescription": "Threshold counter exceeded a value of 32"
},
- {,
+ {
"EventCode": "0x4405C",
"EventName": "PM_CMPLU_STALL_VDP",
"BriefDescription": "Finish stall because the NTF instruction was a vector instruction issued to the Double Precision execution pipe and waiting to finish. Includes binary floating point instructions in 32 and 64 bit binary floating point format. Not qualified multicycle. Qualified by vector"
},
- {,
+ {
"EventCode": "0x4D010",
"EventName": "PM_PMC1_SAVED",
"BriefDescription": "PMC1 Rewind Value saved"
},
- {,
+ {
"EventCode": "0x44042",
"EventName": "PM_INST_FROM_L3",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x200FE",
"EventName": "PM_DATA_FROM_L2MISS",
"BriefDescription": "Demand LD - L2 Miss (not L2 hit)"
},
- {,
+ {
"EventCode": "0x2D14A",
"EventName": "PM_MRK_DATA_FROM_RL2L3_MOD_CYC",
"BriefDescription": "Duration in cycles to reload with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a marked load"
},
- {,
+ {
"EventCode": "0x10028",
"EventName": "PM_STALL_END_ICT_EMPTY",
"BriefDescription": "The number a times the core transitioned from a stall to ICT-empty for this thread"
},
- {,
+ {
"EventCode": "0x2504C",
"EventName": "PM_IPTEG_FROM_MEMORY",
"BriefDescription": "A Page Table Entry was loaded into the TLB from a memory location including L4 from local remote or distant due to a instruction side request"
},
- {,
+ {
"EventCode": "0x4504A",
"EventName": "PM_IPTEG_FROM_OFF_CHIP_CACHE",
"BriefDescription": "A Page Table Entry was loaded into the TLB either shared or modified data from another core's L2/L3 on a different chip (remote or distant) due to a instruction side request"
},
- {,
+ {
"EventCode": "0x1404E",
"EventName": "PM_INST_FROM_L2MISS",
"BriefDescription": "The processor's Instruction cache was reloaded from a location other than the local core's L2 due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x34042",
"EventName": "PM_INST_FROM_L3_DISP_CONFLICT",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 with dispatch conflict due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x4E048",
"EventName": "PM_DPTEG_FROM_DL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on a different Node or Group (Distant), as this chip due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x200F0",
"EventName": "PM_ST_CMPL",
"BriefDescription": "Stores completed from S2Q (2nd-level store queue)."
},
- {,
+ {
"EventCode": "0x4E05C",
"EventName": "PM_LSU_REJECT_LHS",
"BriefDescription": "LSU Reject due to LHS (up to 4 per cycle)"
},
- {,
+ {
"EventCode": "0x14044",
"EventName": "PM_INST_FROM_L3_NO_CONFLICT",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 without conflict due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x3E04C",
"EventName": "PM_DPTEG_FROM_DL4",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's L4 on a different Node or Group (Distant) due to a data side request. When using Radix Page Translation, this count excludes PDE reloads. Only PTE reloads are included"
},
- {,
+ {
"EventCode": "0x1F15E",
"EventName": "PM_MRK_PROBE_NOP_CMPL",
"BriefDescription": "Marked probeNops completed"
},
- {,
+ {
"EventCode": "0x20018",
"EventName": "PM_ST_FWD",
"BriefDescription": "Store forwards that finished"
},
- {,
+ {
"EventCode": "0x1D142",
"EventName": "PM_MRK_DATA_FROM_L31_ECO_SHR_CYC",
"BriefDescription": "Duration in cycles to reload with Shared (S) data from another core's ECO L3 on the same chip due to a marked load"
},
- {,
+ {
"EventCode": "0x24042",
"EventName": "PM_INST_FROM_L3_MEPF",
"BriefDescription": "The processor's Instruction cache was reloaded from local core's L3 without dispatch conflicts hit on Mepf state. due to an instruction fetch (not prefetch)"
},
- {,
+ {
"EventCode": "0x25046",
"EventName": "PM_IPTEG_FROM_RL2L3_MOD",
"BriefDescription": "A Page Table Entry was loaded into the TLB with Modified (M) data from another chip's L2 or L3 on the same Node or Group (Remote), as this chip due to a instruction side request"
},
- {,
+ {
"EventCode": "0x3504A",
"EventName": "PM_IPTEG_FROM_RMEM",
"BriefDescription": "A Page Table Entry was loaded into the TLB from another chip's memory on the same Node or Group ( Remote) due to a instruction side request"
},
- {,
+ {
"EventCode": "0x3C05A",
"EventName": "PM_CMPLU_STALL_VDPLONG",
"BriefDescription": "Finish stall because the NTF instruction was a scalar multi-cycle instruction issued to the Double Precision execution pipe and waiting to finish. Includes binary floating point instructions in 32 and 64 bit binary floating point format. Qualified by NOT vector AND multicycle"
},
- {,
+ {
"EventCode": "0x2E01C",
"EventName": "PM_CMPLU_STALL_TLBIE",
"BriefDescription": "Finish stall because the NTF instruction was a tlbie waiting for response from L2"
}
-]
\ No newline at end of file
+]
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 04/25] perf scripts python: exported-sql-viewer.py: Fix use of TRUE with SQLite
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (2 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 03/25] perf vendor events power9: " Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 05/25] perf maps: Purge the entries from maps->names in __maps__purge() Arnaldo Carvalho de Melo
` (21 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Adrian Hunter, Jiri Olsa, stable,
Arnaldo Carvalho de Melo
From: Adrian Hunter <adrian.hunter@intel.com>
Prior to version 3.23 SQLite does not support TRUE or FALSE, so always
use 1 and 0 for SQLite.
Fixes: 26c11206f433 ("perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.3+
Link: http://lore.kernel.org/lkml/20191113120206.26957-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/scripts/python/exported-sql-viewer.py | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/tools/perf/scripts/python/exported-sql-viewer.py b/tools/perf/scripts/python/exported-sql-viewer.py
index ebc6a2e5eae9..26d7be785288 100755
--- a/tools/perf/scripts/python/exported-sql-viewer.py
+++ b/tools/perf/scripts/python/exported-sql-viewer.py
@@ -637,7 +637,7 @@ class CallGraphRootItem(CallGraphLevelItemBase):
self.query_done = True
if_has_calls = ""
if IsSelectable(glb.db, "comms", columns = "has_calls"):
- if_has_calls = " WHERE has_calls = TRUE"
+ if_has_calls = " WHERE has_calls = " + glb.dbref.TRUE
query = QSqlQuery(glb.db)
QueryExec(query, "SELECT id, comm FROM comms" + if_has_calls)
while query.next():
@@ -918,7 +918,7 @@ class CallTreeRootItem(CallGraphLevelItemBase):
self.query_done = True
if_has_calls = ""
if IsSelectable(glb.db, "comms", columns = "has_calls"):
- if_has_calls = " WHERE has_calls = TRUE"
+ if_has_calls = " WHERE has_calls = " + glb.dbref.TRUE
query = QSqlQuery(glb.db)
QueryExec(query, "SELECT id, comm FROM comms" + if_has_calls)
while query.next():
@@ -1290,7 +1290,7 @@ class SwitchGraphData(GraphData):
QueryExec(query, "SELECT id, c_time"
" FROM comms"
" WHERE c_thread_id = " + str(thread_id) +
- " AND exec_flag = TRUE"
+ " AND exec_flag = " + self.collection.glb.dbref.TRUE +
" AND c_time >= " + str(start_time) +
" AND c_time <= " + str(end_time) +
" ORDER BY c_time, id")
@@ -5016,6 +5016,12 @@ class DBRef():
def __init__(self, is_sqlite3, dbname):
self.is_sqlite3 = is_sqlite3
self.dbname = dbname
+ self.TRUE = "TRUE"
+ self.FALSE = "FALSE"
+ # SQLite prior to version 3.23 does not support TRUE and FALSE
+ if self.is_sqlite3:
+ self.TRUE = "1"
+ self.FALSE = "0"
def Open(self, connection_name):
dbname = self.dbname
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 05/25] perf maps: Purge the entries from maps->names in __maps__purge()
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (3 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 04/25] perf scripts python: exported-sql-viewer.py: Fix use of TRUE with SQLite Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 06/25] perf maps: Do not use an rbtree to sort by map name Arnaldo Carvalho de Melo
` (20 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen
From: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to iterate via the ->names rbtree, as all the entries there
as in maps->entries as well, reuse __maps__purge() for that.
Doing it this way we can kill maps__for_each_entry_by_name(),
maps__for_each_entry_by_name_safe(), maps__{first,next}_by_name().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ps0nrio8pydyo23rr2s696ue@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/map.c | 34 +---------------------------------
tools/perf/util/map_groups.h | 8 --------
2 files changed, 1 insertion(+), 41 deletions(-)
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index 359846833a00..69b9e9b3d915 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -589,15 +589,7 @@ static void __maps__purge(struct maps *maps)
maps__for_each_entry_safe(maps, pos, next) {
rb_erase_init(&pos->rb_node, &maps->entries);
map__put(pos);
- }
-}
-
-static void __maps__purge_names(struct maps *maps)
-{
- struct map *pos, *next;
-
- maps__for_each_entry_by_name_safe(maps, pos, next) {
- rb_erase_init(&pos->rb_node_name, &maps->names);
+ rb_erase_init(&pos->rb_node_name, &maps->names);
map__put(pos);
}
}
@@ -606,7 +598,6 @@ static void maps__exit(struct maps *maps)
{
down_write(&maps->lock);
__maps__purge(maps);
- __maps__purge_names(maps);
up_write(&maps->lock);
}
@@ -994,29 +985,6 @@ struct map *map__next(struct map *map)
return map ? __map__next(map) : NULL;
}
-struct map *maps__first_by_name(struct maps *maps)
-{
- struct rb_node *first = rb_first(&maps->names);
-
- if (first)
- return rb_entry(first, struct map, rb_node_name);
- return NULL;
-}
-
-static struct map *__map__next_by_name(struct map *map)
-{
- struct rb_node *next = rb_next(&map->rb_node_name);
-
- if (next)
- return rb_entry(next, struct map, rb_node_name);
- return NULL;
-}
-
-struct map *map__next_by_name(struct map *map)
-{
- return map ? __map__next_by_name(map) : NULL;
-}
-
struct kmap *__map__kmap(struct map *map)
{
if (!map->dso || !map->dso->kernel)
diff --git a/tools/perf/util/map_groups.h b/tools/perf/util/map_groups.h
index 99cb810acc7c..3f361405a4d4 100644
--- a/tools/perf/util/map_groups.h
+++ b/tools/perf/util/map_groups.h
@@ -33,14 +33,6 @@ struct map *map__next(struct map *map);
for (map = maps__first(maps), next = map__next(map); map; map = next, next = map__next(map))
struct symbol *maps__find_symbol_by_name(struct maps *maps, const char *name, struct map **mapp);
-struct map *maps__first_by_name(struct maps *maps);
-struct map *map__next_by_name(struct map *map);
-
-#define maps__for_each_entry_by_name(maps, map) \
- for (map = maps__first_by_name(maps); map; map = map__next_by_name(map))
-
-#define maps__for_each_entry_by_name_safe(maps, map, next) \
- for (map = maps__first_by_name(maps), next = map__next_by_name(map); map; map = next, next = map__next_by_name(map))
struct map_groups {
struct maps maps;
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 06/25] perf maps: Do not use an rbtree to sort by map name
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (4 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 05/25] perf maps: Purge the entries from maps->names in __maps__purge() Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 07/25] perf map_groups: Add a front end cache for map lookups by name Arnaldo Carvalho de Melo
` (19 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen
From: Arnaldo Carvalho de Melo <acme@redhat.com>
This is only used for the kernel maps, shave 24 bytes out 'struct map'
and just traverse the existing per ip rbtree to look for maps by name,
use a front end cache to reuse the last search if its the same name.
After this 'struct map' is down to just two cachelines:
$ pahole -C map ~/bin/perf
struct map {
union {
struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */
struct list_head node; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 24 */
u64 start; /* 24 8 */
u64 end; /* 32 8 */
_Bool erange_warned; /* 40 1 */
/* XXX 3 bytes hole, try to pack */
u32 priv; /* 44 4 */
u32 prot; /* 48 4 */
u32 flags; /* 52 4 */
u64 pgoff; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 reloc; /* 64 8 */
u32 maj; /* 72 4 */
u32 min; /* 76 4 */
u64 ino; /* 80 8 */
u64 ino_generation; /* 88 8 */
u64 (*map_ip)(struct map *, u64); /* 96 8 */
u64 (*unmap_ip)(struct map *, u64); /* 104 8 */
struct dso * dso; /* 112 8 */
refcount_t refcnt; /* 120 4 */
/* size: 128, cachelines: 2, members: 17 */
/* sum members: 121, holes: 1, sum holes: 3 */
/* padding: 4 */
/* forced alignments: 1 */
} __attribute__((__aligned__(8)));
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-bvr8fqfgzxtgnhnwt5sssx5g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/tests/map_groups.c | 2 +-
tools/perf/util/map.c | 30 ------------------------------
tools/perf/util/map.h | 1 -
tools/perf/util/map_groups.h | 1 -
tools/perf/util/symbol.c | 16 ++--------------
5 files changed, 3 insertions(+), 47 deletions(-)
diff --git a/tools/perf/tests/map_groups.c b/tools/perf/tests/map_groups.c
index b52adad55f8d..6b9f1cdcbe5b 100644
--- a/tools/perf/tests/map_groups.c
+++ b/tools/perf/tests/map_groups.c
@@ -25,7 +25,7 @@ static int check_maps(struct map_def *merged, unsigned int size, struct map_grou
TEST_ASSERT_VAL("wrong map start", map->start == merged[i].start);
TEST_ASSERT_VAL("wrong map end", map->end == merged[i].end);
TEST_ASSERT_VAL("wrong map name", !strcmp(map->dso->name, merged[i].name));
- TEST_ASSERT_VAL("wrong map refcnt", refcount_read(&map->refcnt) == 2);
+ TEST_ASSERT_VAL("wrong map refcnt", refcount_read(&map->refcnt) == 1);
i++;
}
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index 69b9e9b3d915..49e353eaa337 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -26,7 +26,6 @@
#include "ui/ui.h"
static void __maps__insert(struct maps *maps, struct map *map);
-static void __maps__insert_name(struct maps *maps, struct map *map);
static inline int is_anon_memory(const char *filename, u32 flags)
{
@@ -566,7 +565,6 @@ u64 map__objdump_2mem(struct map *map, u64 ip)
static void maps__init(struct maps *maps)
{
maps->entries = RB_ROOT;
- maps->names = RB_ROOT;
init_rwsem(&maps->lock);
}
@@ -589,8 +587,6 @@ static void __maps__purge(struct maps *maps)
maps__for_each_entry_safe(maps, pos, next) {
rb_erase_init(&pos->rb_node, &maps->entries);
map__put(pos);
- rb_erase_init(&pos->rb_node_name, &maps->names);
- map__put(pos);
}
}
@@ -736,7 +732,6 @@ size_t map_groups__fprintf(struct map_groups *mg, FILE *fp)
static void __map_groups__insert(struct map_groups *mg, struct map *map)
{
__maps__insert(&mg->maps, map);
- __maps__insert_name(&mg->maps, map);
}
int map_groups__fixup_overlappings(struct map_groups *mg, struct map *map, FILE *fp)
@@ -893,32 +888,10 @@ static void __maps__insert(struct maps *maps, struct map *map)
map__get(map);
}
-static void __maps__insert_name(struct maps *maps, struct map *map)
-{
- struct rb_node **p = &maps->names.rb_node;
- struct rb_node *parent = NULL;
- struct map *m;
- int rc;
-
- while (*p != NULL) {
- parent = *p;
- m = rb_entry(parent, struct map, rb_node_name);
- rc = strcmp(m->dso->short_name, map->dso->short_name);
- if (rc < 0)
- p = &(*p)->rb_left;
- else
- p = &(*p)->rb_right;
- }
- rb_link_node(&map->rb_node_name, parent, p);
- rb_insert_color(&map->rb_node_name, &maps->names);
- map__get(map);
-}
-
void maps__insert(struct maps *maps, struct map *map)
{
down_write(&maps->lock);
__maps__insert(maps, map);
- __maps__insert_name(maps, map);
up_write(&maps->lock);
}
@@ -926,9 +899,6 @@ static void __maps__remove(struct maps *maps, struct map *map)
{
rb_erase_init(&map->rb_node, &maps->entries);
map__put(map);
-
- rb_erase_init(&map->rb_node_name, &maps->names);
- map__put(map);
}
void maps__remove(struct maps *maps, struct map *map)
diff --git a/tools/perf/util/map.h b/tools/perf/util/map.h
index 365deb6375ab..a31e80991189 100644
--- a/tools/perf/util/map.h
+++ b/tools/perf/util/map.h
@@ -23,7 +23,6 @@ struct map {
struct rb_node rb_node;
struct list_head node;
};
- struct rb_node rb_node_name;
u64 start;
u64 end;
bool erange_warned;
diff --git a/tools/perf/util/map_groups.h b/tools/perf/util/map_groups.h
index 3f361405a4d4..26fc68bd4f60 100644
--- a/tools/perf/util/map_groups.h
+++ b/tools/perf/util/map_groups.h
@@ -16,7 +16,6 @@ struct thread;
struct maps {
struct rb_root entries;
- struct rb_root names;
struct rw_semaphore lock;
};
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 88f4cfbdb69a..0fb9bd8bcf0d 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1764,24 +1764,12 @@ struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
{
struct maps *maps = &mg->maps;
struct map *map;
- struct rb_node *node;
down_read(&maps->lock);
- for (node = maps->names.rb_node; node; ) {
- int rc;
-
- map = rb_entry(node, struct map, rb_node_name);
-
- rc = strcmp(map->dso->short_name, name);
- if (rc < 0)
- node = node->rb_left;
- else if (rc > 0)
- node = node->rb_right;
- else
-
+ maps__for_each_entry(maps, map)
+ if (strcmp(map->dso->short_name, name) == 0)
goto out_unlock;
- }
map = NULL;
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 07/25] perf map_groups: Add a front end cache for map lookups by name
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (5 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 06/25] perf maps: Do not use an rbtree to sort by map name Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 08/25] perf map: No need to adjust the long name of modules Arnaldo Carvalho de Melo
` (18 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen
From: Arnaldo Carvalho de Melo <acme@redhat.com>
Lets see if it helps:
First look at the probeable lines for the function that does lookups by
name in a map_groups struct:
# perf probe -x ~/bin/perf -L map_groups__find_by_name
<map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0>
0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
1 {
2 struct maps *maps = &mg->maps;
struct map *map;
5 down_read(&maps->lock);
7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) {
8 map = mg->last_search_by_name;
9 goto out_unlock;
}
12 maps__for_each_entry(maps, map)
13 if (strcmp(map->dso->short_name, name) == 0) {
14 mg->last_search_by_name = map;
15 goto out_unlock;
}
18 map = NULL;
out_unlock:
21 up_read(&maps->lock);
22 return map;
23 }
int dso__load_vmlinux(struct dso *dso, struct map *map,
const char *vmlinux, bool vmlinux_allocated)
#
Now add a probe to the place where we reuse the last search:
# perf probe -x ~/bin/perf map_groups__find_by_name:8
Added new event:
probe_perf:map_groups__find_by_name (on map_groups__find_by_name:8 in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:map_groups__find_by_name -aR sleep 1
#
Now lets do a system wide 'perf stat' counting those events:
# perf stat -e probe_perf:*
Leave it running and lets do a 'perf top', then, after a while, stop the
'perf stat':
# perf stat -e probe_perf:*
^C
Performance counter stats for 'system wide':
3,603 probe_perf:map_groups__find_by_name
44.565253139 seconds time elapsed
#
yeah, good to have.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-tcz37g3nxv3tvxw3q90vga3p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/map.c | 9 +++++++++
tools/perf/util/map_groups.h | 6 ++----
tools/perf/util/symbol.c | 9 ++++++++-
3 files changed, 19 insertions(+), 5 deletions(-)
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index 49e353eaa337..d0899df77baa 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -572,6 +572,7 @@ void map_groups__init(struct map_groups *mg, struct machine *machine)
{
maps__init(&mg->maps);
mg->machine = machine;
+ mg->last_search_by_name = NULL;
refcount_set(&mg->refcnt, 1);
}
@@ -580,6 +581,14 @@ void map_groups__insert(struct map_groups *mg, struct map *map)
maps__insert(&mg->maps, map);
}
+void map_groups__remove(struct map_groups *mg, struct map *map)
+{
+ if (mg->last_search_by_name == map)
+ mg->last_search_by_name = NULL;
+
+ maps__remove(&mg->maps, map);
+}
+
static void __maps__purge(struct maps *maps)
{
struct map *pos, *next;
diff --git a/tools/perf/util/map_groups.h b/tools/perf/util/map_groups.h
index 26fc68bd4f60..f2a3158572eb 100644
--- a/tools/perf/util/map_groups.h
+++ b/tools/perf/util/map_groups.h
@@ -36,6 +36,7 @@ struct symbol *maps__find_symbol_by_name(struct maps *maps, const char *name, st
struct map_groups {
struct maps maps;
struct machine *machine;
+ struct map *last_search_by_name;
refcount_t refcnt;
#ifdef HAVE_LIBUNWIND_SUPPORT
void *addr_space;
@@ -70,10 +71,7 @@ size_t map_groups__fprintf(struct map_groups *mg, FILE *fp);
void map_groups__insert(struct map_groups *mg, struct map *map);
-static inline void map_groups__remove(struct map_groups *mg, struct map *map)
-{
- maps__remove(&mg->maps, map);
-}
+void map_groups__remove(struct map_groups *mg, struct map *map);
static inline struct map *map_groups__find(struct map_groups *mg, u64 addr)
{
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 0fb9bd8bcf0d..b146d87176e7 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1767,9 +1767,16 @@ struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
down_read(&maps->lock);
+ if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) {
+ map = mg->last_search_by_name;
+ goto out_unlock;
+ }
+
maps__for_each_entry(maps, map)
- if (strcmp(map->dso->short_name, name) == 0)
+ if (strcmp(map->dso->short_name, name) == 0) {
+ mg->last_search_by_name = map;
goto out_unlock;
+ }
map = NULL;
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 08/25] perf map: No need to adjust the long name of modules
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (6 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 07/25] perf map_groups: Add a front end cache for map lookups by name Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 09/25] perf record: No need to process the synthesized MMAP events twice Arnaldo Carvalho de Melo
` (17 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen, Wang Nan
From: Arnaldo Carvalho de Melo <acme@redhat.com>
At some point in the past we needed to make sure we would get the long
name of modules and not just what we get from /proc/modules, but that
need, as described in the cset that introduced the adjustment function:
Fixes: c03d5184f0e9 ("perf machine: Adjust dso->long_name for offline module")
Without using the buildid-cache:
# lsmod | grep trusted
# insmod trusted.ko
# lsmod | grep trusted
trusted 24576 0
# strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
probe:key_seal (on key_seal in trusted)
# perf probe -l
probe:key_seal (on key_seal in trusted)
#
No attempt at opening '[trusted]'.
Now using the build-id cache:
# rmmod trusted
# perf buildid-cache --add ./trusted.ko
# insmod trusted.ko
# strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
#
Again, no attempt at reading '[trusted]'.
Finally, adding a probe to that function and then using:
[root@quaco ~]# perf trace -e probe_perf:*/max-stack=16/ --max-events=2
0.000 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263)
dso__adjust_kmod_long_name (/home/acme/bin/perf)
machine__process_kernel_mmap_event (/home/acme/bin/perf)
machine__process_mmap_event (/home/acme/bin/perf)
perf_event__process_mmap (/home/acme/bin/perf)
machines__deliver_event (/home/acme/bin/perf)
perf_session__deliver_event (/home/acme/bin/perf)
perf_session__process_event (/home/acme/bin/perf)
process_simple (/home/acme/bin/perf)
reader__process_events (/home/acme/bin/perf)
__perf_session__process_events (/home/acme/bin/perf)
perf_session__process_events (/home/acme/bin/perf)
process_buildids (/home/acme/bin/perf)
record__finish_output (/home/acme/bin/perf)
__cmd_record (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
0.055 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263)
dso__adjust_kmod_long_name (/home/acme/bin/perf)
machine__process_kernel_mmap_event (/home/acme/bin/perf)
machine__process_mmap_event (/home/acme/bin/perf)
perf_event__process_mmap (/home/acme/bin/perf)
machines__deliver_event (/home/acme/bin/perf)
perf_session__deliver_event (/home/acme/bin/perf)
perf_session__process_event (/home/acme/bin/perf)
process_simple (/home/acme/bin/perf)
reader__process_events (/home/acme/bin/perf)
__perf_session__process_events (/home/acme/bin/perf)
perf_session__process_events (/home/acme/bin/perf)
process_buildids (/home/acme/bin/perf)
record__finish_output (/home/acme/bin/perf)
__cmd_record (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
#
This was the only path I could find using the perf tools that reach at this
function, then as of november/2019, if we put a probe in the line where the
actuall setting of the dso->long_name is done:
# perf trace -e probe_perf:*
^C[root@quaco ~]
# perf stat -e probe_perf:* -I 2000
2.000404265 0 probe_perf:dso__adjust_kmod_long_name
4.001142200 0 probe_perf:dso__adjust_kmod_long_name
6.001704120 0 probe_perf:dso__adjust_kmod_long_name
8.002398316 0 probe_perf:dso__adjust_kmod_long_name
10.002984010 0 probe_perf:dso__adjust_kmod_long_name
12.003597851 0 probe_perf:dso__adjust_kmod_long_name
14.004113303 0 probe_perf:dso__adjust_kmod_long_name
16.004582773 0 probe_perf:dso__adjust_kmod_long_name
18.005176373 0 probe_perf:dso__adjust_kmod_long_name
20.005801605 0 probe_perf:dso__adjust_kmod_long_name
22.006467540 0 probe_perf:dso__adjust_kmod_long_name
^C 23.683261941 0 probe_perf:dso__adjust_kmod_long_name
#
Its not being used at all.
To further test this I used kvm.ko as the offline module, i.e. removed
if from the buildid-cache by nuking it completely (rm -rf ~/.debug) and
moved it from the normal kernel distro path, removed the modules, stoped
the kvm guest, and then installed it manually, etc.
# rmmod kvm-intel
# rmmod kvm
# lsmod | grep kvm
# modprobe kvm-intel
modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: could not insert 'kvm_intel': Unknown symbol in module, or unknown parameter (see dmesg)
# insmod ./kvm.ko
# modprobe kvm-intel
modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
# lsmod | grep kvm
kvm_intel 299008 0
kvm 765952 1 kvm_intel
irqbypass 16384 1 kvm
#
# perf probe -x ~/bin/perf machine__findnew_module_map:12 mname=m.name:string filename=filename:string 'dso_long_name=map->dso->long_name:string' 'dso_name=map->dso->name:string'
# perf probe -l
probe_perf:machine__findnew_module_map (on machine__findnew_module_map:12@util/machine.c in /home/acme/bin/perf with mname filename dso_long_name dso_name)
# perf record
^C[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 3.416 MB perf.data (33956 samples) ]
# perf trace -e probe_perf:machine*
<SNIP>
6.322 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[salsa20_generic]", filename: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_long_name: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_name: "[salsa20_generic]")
6.375 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[kvm]", filename: "[kvm]", dso_long_name: "[kvm]", dso_name: "[kvm]")
<SNIP>
The filename doesn't come with the path, no point in trying to set the dso->long_name.
[root@quaco ~]# strace -e open,openat perf probe -m ./kvm.ko kvm_apic_local_deliver |& egrep 'open.*kvm'
openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/kvm/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 7
openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 8
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/kvm.ko/5955f426cb93f03f30f3e876814be2db80ab0b55/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
[root@quaco ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jlfew3lyb24d58egrp0o72o2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/machine.c | 27 +--------------------------
1 file changed, 1 insertion(+), 26 deletions(-)
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 6a0f5c25ce3e..6804c8247782 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -772,24 +772,6 @@ int machine__process_ksymbol(struct machine *machine __maybe_unused,
return machine__process_ksymbol_register(machine, event, sample);
}
-static void dso__adjust_kmod_long_name(struct dso *dso, const char *filename)
-{
- const char *dup_filename;
-
- if (!filename || !dso || !dso->long_name)
- return;
- if (dso->long_name[0] != '[')
- return;
- if (!strchr(filename, '/'))
- return;
-
- dup_filename = strdup(filename);
- if (!dup_filename)
- return;
-
- dso__set_long_name(dso, dup_filename, true);
-}
-
struct map *machine__findnew_module_map(struct machine *machine, u64 start,
const char *filename)
{
@@ -801,15 +783,8 @@ struct map *machine__findnew_module_map(struct machine *machine, u64 start,
return NULL;
map = map_groups__find_by_name(&machine->kmaps, m.name);
- if (map) {
- /*
- * If the map's dso is an offline module, give dso__load()
- * a chance to find the file path of that module by fixing
- * long_name.
- */
- dso__adjust_kmod_long_name(map->dso, filename);
+ if (map)
goto out;
- }
dso = machine__findnew_module_dso(machine, &m, filename);
if (dso == NULL)
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 09/25] perf record: No need to process the synthesized MMAP events twice
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (7 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 08/25] perf map: No need to adjust the long name of modules Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 10/25] perf machine: No need to check if kernel module maps pre-exist Arnaldo Carvalho de Melo
` (16 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen
From: Arnaldo Carvalho de Melo <acme@redhat.com>
At the end of a 'perf record' session, by default, we'll process all
samples and populate the threads, maps, etc so as to find out which of
the DSOs got samples, to reduce the size of the build-id table we'll
add to the perf.data headers.
But we don't need to process the PERF_RECORD_MMAP events synthesized
for the kernel modules, as we have those already via
perf_session__create_kernel_maps(), so add mmap/mmap2 handlers that
first look at event->header.misc to see if the event is for a user map,
bailing out if not.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mofoxvcx2dryppcw3o689jdd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/builtin-record.c | 29 +++++++++++++++++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index b95c000c1ed9..7ab3110b4035 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -2148,6 +2148,31 @@ static const char * const __record_usage[] = {
};
const char * const *record_usage = __record_usage;
+static int build_id__process_mmap(struct perf_tool *tool, union perf_event *event,
+ struct perf_sample *sample, struct machine *machine)
+{
+ /*
+ * We already have the kernel maps, put in place via perf_session__create_kernel_maps()
+ * no need to add them twice.
+ */
+ if (!(event->header.misc & PERF_RECORD_MISC_USER))
+ return 0;
+ return perf_event__process_mmap(tool, event, sample, machine);
+}
+
+static int build_id__process_mmap2(struct perf_tool *tool, union perf_event *event,
+ struct perf_sample *sample, struct machine *machine)
+{
+ /*
+ * We already have the kernel maps, put in place via perf_session__create_kernel_maps()
+ * no need to add them twice.
+ */
+ if (!(event->header.misc & PERF_RECORD_MISC_USER))
+ return 0;
+
+ return perf_event__process_mmap2(tool, event, sample, machine);
+}
+
/*
* XXX Ideally would be local to cmd_record() and passed to a record__new
* because we need to have access to it in record__exit, that is called
@@ -2177,8 +2202,8 @@ static struct record record = {
.exit = perf_event__process_exit,
.comm = perf_event__process_comm,
.namespaces = perf_event__process_namespaces,
- .mmap = perf_event__process_mmap,
- .mmap2 = perf_event__process_mmap2,
+ .mmap = build_id__process_mmap,
+ .mmap2 = build_id__process_mmap2,
.ordered_events = true,
},
};
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 10/25] perf machine: No need to check if kernel module maps pre-exist
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (8 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 09/25] perf record: No need to process the synthesized MMAP events twice Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 11/25] perf map_groups: Auto sort maps by name, if needed Arnaldo Carvalho de Melo
` (15 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen
From: Arnaldo Carvalho de Melo <acme@redhat.com>
We'only populating maps for kernel modules either from perf.data file
PERF_RECORD_MMAP records or when parsing /proc/modules, so there is no
need to first look if we already have those module maps in the list,
that would mean the kernel has duplicate entries.
So ditch one use of looking up maps by name.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-gnzjg2hhuz6jnrw91m35059y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/machine.c | 16 ++++++----------
tools/perf/util/machine.h | 2 --
tools/perf/util/symbol.c | 2 +-
3 files changed, 7 insertions(+), 13 deletions(-)
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 6804c8247782..7d2e211e376c 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -772,20 +772,16 @@ int machine__process_ksymbol(struct machine *machine __maybe_unused,
return machine__process_ksymbol_register(machine, event, sample);
}
-struct map *machine__findnew_module_map(struct machine *machine, u64 start,
- const char *filename)
+static struct map *machine__addnew_module_map(struct machine *machine, u64 start,
+ const char *filename)
{
struct map *map = NULL;
- struct dso *dso = NULL;
struct kmod_path m;
+ struct dso *dso;
if (kmod_path__parse_name(&m, filename))
return NULL;
- map = map_groups__find_by_name(&machine->kmaps, m.name);
- if (map)
- goto out;
-
dso = machine__findnew_module_dso(machine, &m, filename);
if (dso == NULL)
goto out;
@@ -1384,7 +1380,7 @@ static int machine__create_module(void *arg, const char *name, u64 start,
if (arch__fix_module_text_start(&start, &size, name) < 0)
return -1;
- map = machine__findnew_module_map(machine, start, name);
+ map = machine__addnew_module_map(machine, start, name);
if (map == NULL)
return -1;
map->end = start + size;
@@ -1559,8 +1555,8 @@ static int machine__process_kernel_mmap_event(struct machine *machine,
strlen(machine->mmap_name) - 1) == 0;
if (event->mmap.filename[0] == '/' ||
(!is_kernel_mmap && event->mmap.filename[0] == '[')) {
- map = machine__findnew_module_map(machine, event->mmap.start,
- event->mmap.filename);
+ map = machine__addnew_module_map(machine, event->mmap.start,
+ event->mmap.filename);
if (map == NULL)
goto out_problem;
diff --git a/tools/perf/util/machine.h b/tools/perf/util/machine.h
index 18e13c0ccd6a..1016978f575a 100644
--- a/tools/perf/util/machine.h
+++ b/tools/perf/util/machine.h
@@ -221,8 +221,6 @@ struct symbol *machine__find_kernel_symbol_by_name(struct machine *machine,
return map_groups__find_symbol_by_name(&machine->kmaps, name, mapp);
}
-struct map *machine__findnew_module_map(struct machine *machine, u64 start,
- const char *filename);
int arch__fix_module_text_start(u64 *start, u64 *size, const char *name);
int machine__load_kallsyms(struct machine *machine, const char *filename);
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index b146d87176e7..b5ae82a11d4b 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1530,7 +1530,7 @@ static bool dso__is_compatible_symtab_type(struct dso *dso, bool kmod,
case DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP:
/*
* kernel modules know their symtab type - it's set when
- * creating a module dso in machine__findnew_module_map().
+ * creating a module dso in machine__addnew_module_map().
*/
return kmod && dso->symtab_type == type;
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 11/25] perf map_groups: Auto sort maps by name, if needed
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (9 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 10/25] perf machine: No need to check if kernel module maps pre-exist Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 12/25] perf callchain: Fix segfault in thread__resolve_callchain_sample() Arnaldo Carvalho de Melo
` (14 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen
From: Arnaldo Carvalho de Melo <acme@redhat.com>
There are still lots of lookups by name, even if just when loading
vmlinux, till that code is studied to figure out if its possible to do
away with those map lookup by names, provide a way to sort it using
libc's qsort/bsearch.
Doing it at the first lookup defers the sorting a bit, and as the code
stands now, is never done for user maps, just for the kernel ones.
# perf probe -l
# perf probe -x ~/bin/perf -L __map_groups__find_by_name
<__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0>
0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name)
1 {
struct map **mapp;
4 if (mg->maps_by_name == NULL &&
5 map__groups__sort_by_name_from_rbtree(mg))
6 return NULL;
8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name);
9 if (mapp)
10 return *mapp;
11 return NULL;
12 }
struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
{
# perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string'
Added new event:
probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string)
You can now use it in all perf tools, such as:
perf record -e probe_perf:found -aR sleep 1
#
# perf probe -x ~/bin/perf -L map_groups__find_by_name
<map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0>
0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
1 {
2 struct maps *maps = &mg->maps;
struct map *map;
5 down_read(&maps->lock);
7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) {
8 map = mg->last_search_by_name;
9 goto out_unlock;
}
/*
* If we have mg->maps_by_name, then the name isn't in the rbtree,
* as mg->maps_by_name mirrors the rbtree when lookups by name are
* made.
*/
16 map = __map_groups__find_by_name(mg, name);
17 if (map || mg->maps_by_name != NULL)
18 goto out_unlock;
/* Fallback to traversing the rbtree... */
21 maps__for_each_entry(maps, map)
22 if (strcmp(map->dso->short_name, name) == 0) {
23 mg->last_search_by_name = map;
24 goto out_unlock;
}
27 map = NULL;
out_unlock:
30 up_read(&maps->lock);
31 return map;
32 }
int dso__load_vmlinux(struct dso *dso, struct map *map,
const char *vmlinux, bool vmlinux_allocated)
# perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string'
Added new events:
probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string)
probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string)
You can now use it in all perf tools, such as:
perf record -e probe_perf:fallback_1 -aR sleep 1
#
# perf probe -l
probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string)
probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string)
probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string)
#
# perf stat -e probe_perf:*
Now run 'perf top' in another term and then, after a while, stop 'perf stat':
Furthermore, if we ask for interval printing, we can see that that is done just
at the start of the workload:
# perf stat -I1000 -e probe_perf:*
# time counts unit events
1.000319513 0 probe_perf:found
1.000319513 0 probe_perf:fallback_1
1.000319513 0 probe_perf:fallback
2.001868092 23,251 probe_perf:found
2.001868092 0 probe_perf:fallback_1
2.001868092 0 probe_perf:fallback
3.002901597 0 probe_perf:found
3.002901597 0 probe_perf:fallback_1
3.002901597 0 probe_perf:fallback
4.003358591 0 probe_perf:found
4.003358591 0 probe_perf:fallback_1
4.003358591 0 probe_perf:fallback
^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/map.c | 49 ++++++++++++++++++++++++++++--
tools/perf/util/map_groups.h | 6 ++++
tools/perf/util/symbol.c | 59 ++++++++++++++++++++++++++++++++++++
3 files changed, 111 insertions(+), 3 deletions(-)
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index d0899df77baa..67e0f81416cb 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -573,20 +573,63 @@ void map_groups__init(struct map_groups *mg, struct machine *machine)
maps__init(&mg->maps);
mg->machine = machine;
mg->last_search_by_name = NULL;
+ mg->nr_maps = 0;
+ mg->maps_by_name = NULL;
refcount_set(&mg->refcnt, 1);
}
+static void __map_groups__free_maps_by_name(struct map_groups *mg)
+{
+ /*
+ * Free everything to try to do it from the rbtree in the next search
+ */
+ zfree(&mg->maps_by_name);
+ mg->nr_maps_allocated = 0;
+}
+
void map_groups__insert(struct map_groups *mg, struct map *map)
{
- maps__insert(&mg->maps, map);
+ struct maps *maps = &mg->maps;
+
+ down_write(&maps->lock);
+ __maps__insert(maps, map);
+ ++mg->nr_maps;
+
+ /*
+ * If we already performed some search by name, then we need to add the just
+ * inserted map and resort.
+ */
+ if (mg->maps_by_name) {
+ if (mg->nr_maps > mg->nr_maps_allocated) {
+ int nr_allocate = mg->nr_maps * 2;
+ struct map **maps_by_name = realloc(mg->maps_by_name, nr_allocate * sizeof(map));
+
+ if (maps_by_name == NULL) {
+ __map_groups__free_maps_by_name(mg);
+ return;
+ }
+
+ mg->maps_by_name = maps_by_name;
+ mg->nr_maps_allocated = nr_allocate;
+ }
+ mg->maps_by_name[mg->nr_maps - 1] = map;
+ __map_groups__sort_by_name(mg);
+ }
+ up_write(&maps->lock);
}
void map_groups__remove(struct map_groups *mg, struct map *map)
{
+ struct maps *maps = &mg->maps;
+ down_write(&maps->lock);
if (mg->last_search_by_name == map)
mg->last_search_by_name = NULL;
- maps__remove(&mg->maps, map);
+ __maps__remove(maps, map);
+ --mg->nr_maps;
+ if (mg->maps_by_name)
+ __map_groups__free_maps_by_name(mg);
+ up_write(&maps->lock);
}
static void __maps__purge(struct maps *maps)
@@ -904,7 +947,7 @@ void maps__insert(struct maps *maps, struct map *map)
up_write(&maps->lock);
}
-static void __maps__remove(struct maps *maps, struct map *map)
+void __maps__remove(struct maps *maps, struct map *map)
{
rb_erase_init(&map->rb_node, &maps->entries);
map__put(map);
diff --git a/tools/perf/util/map_groups.h b/tools/perf/util/map_groups.h
index f2a3158572eb..63ed211fe241 100644
--- a/tools/perf/util/map_groups.h
+++ b/tools/perf/util/map_groups.h
@@ -21,6 +21,7 @@ struct maps {
void maps__insert(struct maps *maps, struct map *map);
void maps__remove(struct maps *maps, struct map *map);
+void __maps__remove(struct maps *maps, struct map *map);
struct map *maps__find(struct maps *maps, u64 addr);
struct map *maps__first(struct maps *maps);
struct map *map__next(struct map *map);
@@ -37,7 +38,10 @@ struct map_groups {
struct maps maps;
struct machine *machine;
struct map *last_search_by_name;
+ struct map **maps_by_name;
refcount_t refcnt;
+ unsigned int nr_maps;
+ unsigned int nr_maps_allocated;
#ifdef HAVE_LIBUNWIND_SUPPORT
void *addr_space;
struct unwind_libunwind_ops *unwind_libunwind_ops;
@@ -97,4 +101,6 @@ struct map *map_groups__find_by_name(struct map_groups *mg, const char *name);
int map_groups__merge_in(struct map_groups *kmaps, struct map *new_map);
+void __map_groups__sort_by_name(struct map_groups *mg);
+
#endif // __PERF_MAP_GROUPS_H
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index b5ae82a11d4b..db9667aacb88 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1760,6 +1760,56 @@ int dso__load(struct dso *dso, struct map *map)
return ret;
}
+static int map__strcmp(const void *a, const void *b)
+{
+ const struct map *ma = *(const struct map **)a, *mb = *(const struct map **)b;
+ return strcmp(ma->dso->short_name, mb->dso->short_name);
+}
+
+static int map__strcmp_name(const void *name, const void *b)
+{
+ const struct map *map = *(const struct map **)b;
+ return strcmp(name, map->dso->short_name);
+}
+
+void __map_groups__sort_by_name(struct map_groups *mg)
+{
+ qsort(mg->maps_by_name, mg->nr_maps, sizeof(struct map *), map__strcmp);
+}
+
+static int map__groups__sort_by_name_from_rbtree(struct map_groups *mg)
+{
+ struct map *map;
+ struct map **maps_by_name = realloc(mg->maps_by_name, mg->nr_maps * sizeof(map));
+ int i = 0;
+
+ if (maps_by_name == NULL)
+ return -1;
+
+ mg->maps_by_name = maps_by_name;
+ mg->nr_maps_allocated = mg->nr_maps;
+
+ maps__for_each_entry(&mg->maps, map)
+ maps_by_name[i++] = map;
+
+ __map_groups__sort_by_name(mg);
+ return 0;
+}
+
+static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name)
+{
+ struct map **mapp;
+
+ if (mg->maps_by_name == NULL &&
+ map__groups__sort_by_name_from_rbtree(mg))
+ return NULL;
+
+ mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name);
+ if (mapp)
+ return *mapp;
+ return NULL;
+}
+
struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
{
struct maps *maps = &mg->maps;
@@ -1771,7 +1821,16 @@ struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
map = mg->last_search_by_name;
goto out_unlock;
}
+ /*
+ * If we have mg->maps_by_name, then the name isn't in the rbtree,
+ * as mg->maps_by_name mirrors the rbtree when lookups by name are
+ * made.
+ */
+ map = __map_groups__find_by_name(mg, name);
+ if (map || mg->maps_by_name != NULL)
+ goto out_unlock;
+ /* Fallback to traversing the rbtree... */
maps__for_each_entry(maps, map)
if (strcmp(map->dso->short_name, name) == 0) {
mg->last_search_by_name = map;
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 12/25] perf callchain: Fix segfault in thread__resolve_callchain_sample()
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (10 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 11/25] perf map_groups: Auto sort maps by name, if needed Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 13/25] libtraceevent: Fix parsing of event %o and %X argument types Arnaldo Carvalho de Melo
` (13 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Adrian Hunter, Arnaldo Carvalho de Melo,
Jiri Olsa
From: Adrian Hunter <adrian.hunter@intel.com>
Do not dereference 'chain' when it is NULL.
$ perf record -e intel_pt//u -e branch-misses:u uname
$ perf report --itrace=l --branch-history
perf: Segmentation fault
Fixes: e9024d519d89 ("perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191114142538.4097-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/machine.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 7d2e211e376c..71ee078d30f4 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -2385,7 +2385,7 @@ static int thread__resolve_callchain_sample(struct thread *thread,
}
check_calls:
- if (callchain_param.order != ORDER_CALLEE) {
+ if (chain && callchain_param.order != ORDER_CALLEE) {
err = find_prev_cpumode(chain, thread, cursor, parent, root_al,
&cpumode, chain->nr - first_call);
if (err)
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 13/25] libtraceevent: Fix parsing of event %o and %X argument types
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (11 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 12/25] perf callchain: Fix segfault in thread__resolve_callchain_sample() Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 14/25] perf map: Use bitmap for booleans Arnaldo Carvalho de Melo
` (12 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Konstantin Khlebnikov, Steven Rostedt,
Tzvetomir Stoyanov, Arnaldo Carvalho de Melo
From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Add missing "%o" and "%X". Ext4 events use "%o" for printing i_mode.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Link: http://lore.kernel.org/lkml/157338066113.6548.11461421296091086041.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/lib/traceevent/event-parse.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index d948475585ce..beaa8b8c08ff 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -4395,8 +4395,10 @@ static struct tep_print_arg *make_bprint_args(char *fmt, void *data, int size, s
/* fall through */
case 'd':
case 'u':
- case 'x':
case 'i':
+ case 'x':
+ case 'X':
+ case 'o':
switch (ls) {
case 0:
vsize = 4;
@@ -5078,10 +5080,11 @@ static void pretty_print(struct trace_seq *s, void *data, int size, struct tep_e
/* fall through */
case 'd':
+ case 'u':
case 'i':
case 'x':
case 'X':
- case 'u':
+ case 'o':
if (!arg) {
do_warning_event(event, "no argument match");
event->flags |= TEP_EVENT_FL_FAILED;
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 14/25] perf map: Use bitmap for booleans
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (12 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 13/25] libtraceevent: Fix parsing of event %o and %X argument types Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 15/25] perf map: Move seldom used ->flags field to second cacheline Arnaldo Carvalho de Melo
` (11 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen
From: Arnaldo Carvalho de Melo <acme@redhat.com>
The map->priv and map->erange_warned are seldom used, the first only in
tests/vmlinux-kallsyms.c, the later only when hist_entry__inc_addr_samples()
returns -ERANGE in 'perf top', which are really rare occasions, so make
them a bool bitfield.
This will open up space for other members on the first cacheline.
$ pahole -C map ~/bin/perf
struct map {
union {
struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */
struct list_head node; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 24 */
u64 start; /* 24 8 */
u64 end; /* 32 8 */
_Bool erange_warned:1; /* 40: 0 1 */
_Bool priv:1; /* 40: 1 1 */
/* XXX 6 bits hole, try to pack */
/* XXX 3 bytes hole, try to pack */
u32 prot; /* 44 4 */
u32 flags; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
u64 pgoff; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 reloc; /* 64 8 */
u32 maj; /* 72 4 */
u32 min; /* 76 4 */
u64 ino; /* 80 8 */
u64 ino_generation; /* 88 8 */
u64 (*map_ip)(struct map *, u64); /* 96 8 */
u64 (*unmap_ip)(struct map *, u64); /* 104 8 */
struct dso * dso; /* 112 8 */
refcount_t refcnt; /* 120 4 */
/* size: 128, cachelines: 2, members: 17 */
/* sum members: 116, holes: 2, sum holes: 7 */
/* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */
/* padding: 4 */
/* forced alignments: 1 */
} __attribute__((__aligned__(8)));
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-g5545pcq4ff0wr17tfb1piqt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/map.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/perf/util/map.h b/tools/perf/util/map.h
index a31e80991189..e2466aa5bb41 100644
--- a/tools/perf/util/map.h
+++ b/tools/perf/util/map.h
@@ -25,8 +25,8 @@ struct map {
};
u64 start;
u64 end;
- bool erange_warned;
- u32 priv;
+ bool erange_warned:1;
+ bool priv:1;
u32 prot;
u32 flags;
u64 pgoff;
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 15/25] perf map: Move seldom used ->flags field to second cacheline
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (13 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 14/25] perf map: Use bitmap for booleans Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 16/25] x86/insn: perf tools: Add some instructions to the new instructions test Arnaldo Carvalho de Melo
` (10 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen
From: Arnaldo Carvalho de Melo <acme@redhat.com>
So we start with:
$ pahole -C map ~/bin/perf
struct map {
union {
struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */
struct list_head node; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 24 */
u64 start; /* 24 8 */
u64 end; /* 32 8 */
_Bool erange_warned:1; /* 40: 0 1 */
_Bool priv:1; /* 40: 1 1 */
/* XXX 6 bits hole, try to pack */
/* XXX 3 bytes hole, try to pack */
u32 prot; /* 44 4 */
u32 flags; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
u64 pgoff; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 reloc; /* 64 8 */
u32 maj; /* 72 4 */
u32 min; /* 76 4 */
u64 ino; /* 80 8 */
u64 ino_generation; /* 88 8 */
u64 (*map_ip)(struct map *, u64); /* 96 8 */
u64 (*unmap_ip)(struct map *, u64); /* 104 8 */
struct dso * dso; /* 112 8 */
refcount_t refcnt; /* 120 4 */
/* size: 128, cachelines: 2, members: 17 */
/* sum members: 116, holes: 2, sum holes: 7 */
/* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */
/* padding: 4 */
/* forced alignments: 1 */
} __attribute__((__aligned__(8)));
$
and 'flags' is seldom used when printing details about the map or with
the "cacheline" sort order, we can move them it to the second cacheline,
that will allow combining it with 'refcnt', that is only four bytes:
$ pahole -C map ~/bin/perf
struct map {
union {
struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */
struct list_head node; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 24 */
u64 start; /* 24 8 */
u64 end; /* 32 8 */
_Bool erange_warned:1; /* 40: 0 1 */
_Bool priv:1; /* 40: 1 1 */
/* XXX 6 bits hole, try to pack */
/* XXX 3 bytes hole, try to pack */
u32 prot; /* 44 4 */
u64 pgoff; /* 48 8 */
u64 reloc; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u32 maj; /* 64 4 */
u32 min; /* 68 4 */
u64 ino; /* 72 8 */
u64 ino_generation; /* 80 8 */
u64 (*map_ip)(struct map *, u64); /* 88 8 */
u64 (*unmap_ip)(struct map *, u64); /* 96 8 */
struct dso * dso; /* 104 8 */
refcount_t refcnt; /* 112 4 */
u32 flags; /* 116 4 */
/* size: 120, cachelines: 2, members: 17 */
/* sum members: 116, holes: 1, sum holes: 3 */
/* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */
/* forced alignments: 1 */
/* last cacheline: 56 bytes */
} __attribute__((__aligned__(8)));
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-2cdw3zlw1mkamaf7nqtdlxfi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/map.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/util/map.h b/tools/perf/util/map.h
index e2466aa5bb41..0a6c45f85cd9 100644
--- a/tools/perf/util/map.h
+++ b/tools/perf/util/map.h
@@ -28,7 +28,6 @@ struct map {
bool erange_warned:1;
bool priv:1;
u32 prot;
- u32 flags;
u64 pgoff;
u64 reloc;
u32 maj, min; /* only valid for MMAP2 record */
@@ -42,6 +41,7 @@ struct map {
struct dso *dso;
refcount_t refcnt;
+ u32 flags;
};
struct kmap;
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 16/25] x86/insn: perf tools: Add some instructions to the new instructions test
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (14 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 15/25] perf map: Move seldom used ->flags field to second cacheline Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 17/25] x86/insn: Add some Intel instructions to the opcode map Arnaldo Carvalho de Melo
` (9 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Adrian Hunter, Andi Kleen, Borislav Petkov,
H . Peter Anvin, Jiri Olsa, Masami Hiramatsu, Peter Zijlstra,
x86, Arnaldo Carvalho de Melo
From: Adrian Hunter <adrian.hunter@intel.com>
Add to the "x86 instruction decoder - new instructions" test the following
instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/arch/x86/tests/insn-x86-dat-32.c | 52 +++++++++
tools/perf/arch/x86/tests/insn-x86-dat-64.c | 62 +++++++++++
tools/perf/arch/x86/tests/insn-x86-dat-src.c | 109 +++++++++++++++++++
3 files changed, 223 insertions(+)
diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-32.c b/tools/perf/arch/x86/tests/insn-x86-dat-32.c
index fab3c6de73fa..58f8f2a095c4 100644
--- a/tools/perf/arch/x86/tests/insn-x86-dat-32.c
+++ b/tools/perf/arch/x86/tests/insn-x86-dat-32.c
@@ -1647,6 +1647,12 @@
"0f ae 30 \txsaveopt (%eax)",},
{{0x0f, 0xae, 0xf0, }, 3, 0, "", "",
"0f ae f0 \tmfence ",},
+{{0x0f, 0x1c, 0x00, }, 3, 0, "", "",
+"0f 1c 00 \tcldemote (%eax)",},
+{{0x0f, 0x1c, 0x05, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
+"0f 1c 05 78 56 34 12 \tcldemote 0x12345678",},
+{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%eax,%ecx,8)",},
{{0x0f, 0xc7, 0x20, }, 3, 0, "", "",
"0f c7 20 \txsavec (%eax)",},
{{0x0f, 0xc7, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
@@ -1677,3 +1683,49 @@
"f3 0f ae 25 78 56 34 12 \tptwritel 0x12345678",},
{{0xf3, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
"f3 0f ae a4 c8 78 56 34 12 \tptwritel 0x12345678(%eax,%ecx,8)",},
+{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "",
+"66 0f ae f3 \ttpause %ebx",},
+{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"67 f3 0f ae f0 \tumonitor %ax",},
+{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f3 0f ae f0 \tumonitor %eax",},
+{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f2 0f ae f0 \tumwait %eax",},
+{{0x0f, 0x38, 0xf9, 0x03, }, 4, 0, "", "",
+"0f 38 f9 03 \tmovdiri %eax,(%ebx)",},
+{{0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 38 f9 88 78 56 34 12 \tmovdiri %ecx,0x12345678(%eax)",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"66 0f 38 f8 18 \tmovdir64b (%eax),%ebx",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 66 0f 38 f8 1c \tmovdir64b (%si),%bx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 66 0f 38 f8 8c 34 12 \tmovdir64b 0x1234(%si),%cx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f2 0f 38 f8 18 \tenqcmd (%eax),%ebx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 f2 0f 38 f8 1c \tenqcmd (%si),%bx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 f2 0f 38 f8 8c 34 12 \tenqcmd 0x1234(%si),%cx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f3 0f 38 f8 18 \tenqcmds (%eax),%ebx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 f3 0f 38 f8 1c \tenqcmds (%si),%bx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 f3 0f 38 f8 8c 34 12 \tenqcmds 0x1234(%si),%cx",},
+{{0x0f, 0x01, 0xcf, }, 3, 0, "", "",
+"0f 01 cf \tencls ",},
+{{0x0f, 0x01, 0xd7, }, 3, 0, "", "",
+"0f 01 d7 \tenclu ",},
+{{0x0f, 0x01, 0xc0, }, 3, 0, "", "",
+"0f 01 c0 \tenclv ",},
+{{0x0f, 0x01, 0xc5, }, 3, 0, "", "",
+"0f 01 c5 \tpconfig ",},
+{{0xf3, 0x0f, 0x09, }, 3, 0, "", "",
+"f3 0f 09 \twbnoinvd ",},
diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-64.c b/tools/perf/arch/x86/tests/insn-x86-dat-64.c
index c57f34603b9b..656f8aed31de 100644
--- a/tools/perf/arch/x86/tests/insn-x86-dat-64.c
+++ b/tools/perf/arch/x86/tests/insn-x86-dat-64.c
@@ -1667,6 +1667,16 @@
"41 0f ae 30 \txsaveopt (%r8)",},
{{0x0f, 0xae, 0xf0, }, 3, 0, "", "",
"0f ae f0 \tmfence ",},
+{{0x0f, 0x1c, 0x00, }, 3, 0, "", "",
+"0f 1c 00 \tcldemote (%rax)",},
+{{0x41, 0x0f, 0x1c, 0x00, }, 4, 0, "", "",
+"41 0f 1c 00 \tcldemote (%r8)",},
+{{0x0f, 0x1c, 0x04, 0x25, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 1c 04 25 78 56 34 12 \tcldemote 0x12345678",},
+{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%rax,%rcx,8)",},
+{{0x41, 0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"41 0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%r8,%rcx,8)",},
{{0x0f, 0xc7, 0x20, }, 3, 0, "", "",
"0f c7 20 \txsavec (%rax)",},
{{0x41, 0x0f, 0xc7, 0x20, }, 4, 0, "", "",
@@ -1727,3 +1737,55 @@
"f3 48 0f ae a4 c8 78 56 34 12 \tptwriteq 0x12345678(%rax,%rcx,8)",},
{{0xf3, 0x49, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
"f3 49 0f ae a4 c8 78 56 34 12 \tptwriteq 0x12345678(%r8,%rcx,8)",},
+{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "",
+"66 0f ae f3 \ttpause %ebx",},
+{{0x66, 0x41, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"66 41 0f ae f0 \ttpause %r8d",},
+{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"67 f3 0f ae f0 \tumonitor %eax",},
+{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f3 0f ae f0 \tumonitor %rax",},
+{{0x67, 0xf3, 0x41, 0x0f, 0xae, 0xf0, }, 6, 0, "", "",
+"67 f3 41 0f ae f0 \tumonitor %r8d",},
+{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f2 0f ae f0 \tumwait %eax",},
+{{0xf2, 0x41, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"f2 41 0f ae f0 \tumwait %r8d",},
+{{0x48, 0x0f, 0x38, 0xf9, 0x03, }, 5, 0, "", "",
+"48 0f 38 f9 03 \tmovdiri %rax,(%rbx)",},
+{{0x48, 0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"48 0f 38 f9 88 78 56 34 12 \tmovdiri %rcx,0x12345678(%rax)",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"66 0f 38 f8 18 \tmovdir64b (%rax),%rbx",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%rax),%rcx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "",
+"67 66 0f 38 f8 18 \tmovdir64b (%eax),%ebx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
+"67 66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f2 0f 38 f8 18 \tenqcmd (%rax),%rbx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%rax),%rcx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "",
+"67 f2 0f 38 f8 18 \tenqcmd (%eax),%ebx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
+"67 f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f3 0f 38 f8 18 \tenqcmds (%rax),%rbx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%rax),%rcx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "",
+"67 f3 0f 38 f8 18 \tenqcmds (%eax),%ebx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
+"67 f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",},
+{{0x0f, 0x01, 0xcf, }, 3, 0, "", "",
+"0f 01 cf \tencls ",},
+{{0x0f, 0x01, 0xd7, }, 3, 0, "", "",
+"0f 01 d7 \tenclu ",},
+{{0x0f, 0x01, 0xc0, }, 3, 0, "", "",
+"0f 01 c0 \tenclv ",},
+{{0x0f, 0x01, 0xc5, }, 3, 0, "", "",
+"0f 01 c5 \tpconfig ",},
+{{0xf3, 0x0f, 0x09, }, 3, 0, "", "",
+"f3 0f 09 \twbnoinvd ",},
diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-src.c b/tools/perf/arch/x86/tests/insn-x86-dat-src.c
index 891415b10984..dd85a3afd9ce 100644
--- a/tools/perf/arch/x86/tests/insn-x86-dat-src.c
+++ b/tools/perf/arch/x86/tests/insn-x86-dat-src.c
@@ -1320,6 +1320,14 @@ int main(void)
asm volatile("xsaveopt (%r8)");
asm volatile("mfence");
+ /* cldemote m8 */
+
+ asm volatile("cldemote (%rax)");
+ asm volatile("cldemote (%r8)");
+ asm volatile("cldemote (0x12345678)");
+ asm volatile("cldemote 0x12345678(%rax,%rcx,8)");
+ asm volatile("cldemote 0x12345678(%r8,%rcx,8)");
+
/* xsavec mem */
asm volatile("xsavec (%rax)");
@@ -1364,6 +1372,48 @@ int main(void)
asm volatile("ptwriteq 0x12345678(%rax,%rcx,8)");
asm volatile("ptwriteq 0x12345678(%r8,%rcx,8)");
+ /* tpause */
+
+ asm volatile("tpause %ebx");
+ asm volatile("tpause %r8d");
+
+ /* umonitor */
+
+ asm volatile("umonitor %eax");
+ asm volatile("umonitor %rax");
+ asm volatile("umonitor %r8d");
+
+ /* umwait */
+
+ asm volatile("umwait %eax");
+ asm volatile("umwait %r8d");
+
+ /* movdiri */
+
+ asm volatile("movdiri %rax,(%rbx)");
+ asm volatile("movdiri %rcx,0x12345678(%rax)");
+
+ /* movdir64b */
+
+ asm volatile("movdir64b (%rax),%rbx");
+ asm volatile("movdir64b 0x12345678(%rax),%rcx");
+ asm volatile("movdir64b (%eax),%ebx");
+ asm volatile("movdir64b 0x12345678(%eax),%ecx");
+
+ /* enqcmd */
+
+ asm volatile("enqcmd (%rax),%rbx");
+ asm volatile("enqcmd 0x12345678(%rax),%rcx");
+ asm volatile("enqcmd (%eax),%ebx");
+ asm volatile("enqcmd 0x12345678(%eax),%ecx");
+
+ /* enqcmds */
+
+ asm volatile("enqcmds (%rax),%rbx");
+ asm volatile("enqcmds 0x12345678(%rax),%rcx");
+ asm volatile("enqcmds (%eax),%ebx");
+ asm volatile("enqcmds 0x12345678(%eax),%ecx");
+
#else /* #ifdef __x86_64__ */
/* bound r32, mem (same op code as EVEX prefix) */
@@ -2656,6 +2706,12 @@ int main(void)
asm volatile("xsaveopt (%eax)");
asm volatile("mfence");
+ /* cldemote m8 */
+
+ asm volatile("cldemote (%eax)");
+ asm volatile("cldemote (0x12345678)");
+ asm volatile("cldemote 0x12345678(%eax,%ecx,8)");
+
/* xsavec mem */
asm volatile("xsavec (%eax)");
@@ -2684,8 +2740,61 @@ int main(void)
asm volatile("ptwritel (0x12345678)");
asm volatile("ptwritel 0x12345678(%eax,%ecx,8)");
+ /* tpause */
+
+ asm volatile("tpause %ebx");
+
+ /* umonitor */
+
+ asm volatile("umonitor %ax");
+ asm volatile("umonitor %eax");
+
+ /* umwait */
+
+ asm volatile("umwait %eax");
+
+ /* movdiri */
+
+ asm volatile("movdiri %eax,(%ebx)");
+ asm volatile("movdiri %ecx,0x12345678(%eax)");
+
+ /* movdir64b */
+
+ asm volatile("movdir64b (%eax),%ebx");
+ asm volatile("movdir64b 0x12345678(%eax),%ecx");
+ asm volatile("movdir64b (%si),%bx");
+ asm volatile("movdir64b 0x1234(%si),%cx");
+
+ /* enqcmd */
+
+ asm volatile("enqcmd (%eax),%ebx");
+ asm volatile("enqcmd 0x12345678(%eax),%ecx");
+ asm volatile("enqcmd (%si),%bx");
+ asm volatile("enqcmd 0x1234(%si),%cx");
+
+ /* enqcmds */
+
+ asm volatile("enqcmds (%eax),%ebx");
+ asm volatile("enqcmds 0x12345678(%eax),%ecx");
+ asm volatile("enqcmds (%si),%bx");
+ asm volatile("enqcmds 0x1234(%si),%cx");
+
#endif /* #ifndef __x86_64__ */
+ /* SGX */
+
+ asm volatile("encls");
+ asm volatile("enclu");
+ asm volatile("enclv");
+
+ /* pconfig */
+
+ asm volatile("pconfig");
+
+ /* wbnoinvd */
+
+ asm volatile("wbnoinvd");
+
/* Following line is a marker for the awk script - do not change */
asm volatile("rdtsc"); /* Stop here */
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 17/25] x86/insn: Add some Intel instructions to the opcode map
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (15 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 16/25] x86/insn: perf tools: Add some instructions to the new instructions test Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 18/25] perf probe: Show correct statement line number by perf probe -l Arnaldo Carvalho de Melo
` (8 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Adrian Hunter, Andi Kleen, Masami Hiramatsu,
Borislav Petkov, H . Peter Anvin, Jiri Olsa, Peter Zijlstra, x86,
Arnaldo Carvalho de Melo
From: Adrian Hunter <adrian.hunter@intel.com>
Add to the opcode map the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:
$ perf test -v "new " 2>&1 | grep -i cldemote
Decoded ok: 0f 1c 00 cldemote (%eax)
Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
Decoded ok: 0f 1c 00 cldemote (%rax)
Decoded ok: 41 0f 1c 00 cldemote (%r8)
Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
$ perf test -v "new " 2>&1 | grep -i tpause
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 41 0f ae f0 tpause %r8d
$ perf test -v "new " 2>&1 | grep -i umonitor
Decoded ok: 67 f3 0f ae f0 umonitor %ax
Decoded ok: f3 0f ae f0 umonitor %eax
Decoded ok: 67 f3 0f ae f0 umonitor %eax
Decoded ok: f3 0f ae f0 umonitor %rax
Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d
$ perf test -v "new " 2>&1 | grep -i umwait
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 41 0f ae f0 umwait %r8d
$ perf test -v "new " 2>&1 | grep -i movdiri
Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx)
Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax)
Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx)
Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax)
$ perf test -v "new " 2>&1 | grep -i movdir64b
Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx
Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx
Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx
Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmd
Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx
Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx
Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmds
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i encls
Decoded ok: 0f 01 cf encls
Decoded ok: 0f 01 cf encls
$ perf test -v "new " 2>&1 | grep -i enclu
Decoded ok: 0f 01 d7 enclu
Decoded ok: 0f 01 d7 enclu
$ perf test -v "new " 2>&1 | grep -i enclv
Decoded ok: 0f 01 c0 enclv
Decoded ok: 0f 01 c0 enclv
$ perf test -v "new " 2>&1 | grep -i pconfig
Decoded ok: 0f 01 c5 pconfig
Decoded ok: 0f 01 c5 pconfig
$ perf test -v "new " 2>&1 | grep -i wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
tools/arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
2 files changed, 24 insertions(+), 12 deletions(-)
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..0a0e9112f284 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -333,7 +333,7 @@ AVXcode: 1
06: CLTS
07: SYSRET (o64)
08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
0a:
0b: UD2 (1B)
0c:
@@ -364,7 +364,7 @@ AVXcode: 1
# a ModR/M byte.
1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
1d:
1e:
1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
EndTable
Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
EndTable
GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
3: LIDT Ms
4: SMSW Mw/Rv
5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
4: XSAVE | ptwrite Ey (F3),(11B)
5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
7: clflush | clflushopt (66) | sfence (11B)
EndTable
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
6: vscatterpf1qps/d Wx (66),(ev)
EndTable
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
# AMD's Prefetch Group
GrpTable: GrpP
0: PREFETCH
diff --git a/tools/arch/x86/lib/x86-opcode-map.txt b/tools/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..0a0e9112f284 100644
--- a/tools/arch/x86/lib/x86-opcode-map.txt
+++ b/tools/arch/x86/lib/x86-opcode-map.txt
@@ -333,7 +333,7 @@ AVXcode: 1
06: CLTS
07: SYSRET (o64)
08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
0a:
0b: UD2 (1B)
0c:
@@ -364,7 +364,7 @@ AVXcode: 1
# a ModR/M byte.
1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
1d:
1e:
1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
EndTable
Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
EndTable
GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
3: LIDT Ms
4: SMSW Mw/Rv
5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
4: XSAVE | ptwrite Ey (F3),(11B)
5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
7: clflush | clflushopt (66) | sfence (11B)
EndTable
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
6: vscatterpf1qps/d Wx (66),(ev)
EndTable
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
# AMD's Prefetch Group
GrpTable: GrpP
0: PREFETCH
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 18/25] perf probe: Show correct statement line number by perf probe -l
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (16 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 17/25] x86/insn: Add some Intel instructions to the opcode map Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 19/25] perf probe: Verify given line is a representive line Arnaldo Carvalho de Melo
` (7 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Masami Hiramatsu, Arnaldo Carvalho de Melo,
Ravi Bangoria, Steven Rostedt, Tom Zanussi
From: Masami Hiramatsu <mhiramat@kernel.org>
The dwarf_getsrc_die() can return the line which is not a statement nor
the least line number among the lines which shares same address.
This can lead perf probe --list shows incorrect line number for probed
address.
To fix this, this introduces cu_getsrc_die() which returns only a
statement line and which is the least line number (we call it the
representive line for an address), and use it in cu_find_lineinfo().
Also, if the given address is the entry address of a real function,
cu_find_lineinfo() returns the function declared line number instead of
the start line number of the function body.
For example, without this change perf probe -l shows incorrect line as
below.
# perf probe -a kernel_read:2
Added new event:
probe:kernel_read (on kernel_read:2)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
# perf probe -l
probe:kernel_read (on kernel_read:1@linux-5.0.0/fs/read_write.c)
With this fix, it shows correct line number as below;
# perf probe -l
probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c)
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406471067.24476.17463149618465494448.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/dwarf-aux.c | 62 ++++++++++++++++++++++++++++++++++---
1 file changed, 58 insertions(+), 4 deletions(-)
diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c
index 5544bfbd0f6c..aa898014ad12 100644
--- a/tools/perf/util/dwarf-aux.c
+++ b/tools/perf/util/dwarf-aux.c
@@ -59,6 +59,51 @@ const char *cu_get_comp_dir(Dwarf_Die *cu_die)
return dwarf_formstring(&attr);
}
+/* Unlike dwarf_getsrc_die(), cu_getsrc_die() only returns statement line */
+static Dwarf_Line *cu_getsrc_die(Dwarf_Die *cu_die, Dwarf_Addr addr)
+{
+ Dwarf_Addr laddr;
+ Dwarf_Lines *lines;
+ Dwarf_Line *line;
+ size_t nlines, l, u, n;
+ bool flag;
+
+ if (dwarf_getsrclines(cu_die, &lines, &nlines) != 0 ||
+ nlines == 0)
+ return NULL;
+
+ /* Lines are sorted by address, use binary search */
+ l = 0; u = nlines - 1;
+ while (l < u) {
+ n = u - (u - l) / 2;
+ line = dwarf_onesrcline(lines, n);
+ if (!line || dwarf_lineaddr(line, &laddr) != 0)
+ return NULL;
+ if (addr < laddr)
+ u = n - 1;
+ else
+ l = n;
+ }
+ /* Going backward to find the lowest line */
+ do {
+ line = dwarf_onesrcline(lines, --l);
+ if (!line || dwarf_lineaddr(line, &laddr) != 0)
+ return NULL;
+ } while (laddr == addr);
+ l++;
+ /* Going foward to find the statement line */
+ do {
+ line = dwarf_onesrcline(lines, l++);
+ if (!line || dwarf_lineaddr(line, &laddr) != 0 ||
+ dwarf_linebeginstatement(line, &flag) != 0)
+ return NULL;
+ if (laddr > addr)
+ return NULL;
+ } while (!flag);
+
+ return line;
+}
+
/**
* cu_find_lineinfo - Get a line number and file name for given address
* @cu_die: a CU DIE
@@ -72,17 +117,26 @@ int cu_find_lineinfo(Dwarf_Die *cu_die, unsigned long addr,
const char **fname, int *lineno)
{
Dwarf_Line *line;
- Dwarf_Addr laddr;
+ Dwarf_Die die_mem;
+ Dwarf_Addr faddr;
- line = dwarf_getsrc_die(cu_die, (Dwarf_Addr)addr);
- if (line && dwarf_lineaddr(line, &laddr) == 0 &&
- addr == (unsigned long)laddr && dwarf_lineno(line, lineno) == 0) {
+ if (die_find_realfunc(cu_die, (Dwarf_Addr)addr, &die_mem)
+ && die_entrypc(&die_mem, &faddr) == 0 &&
+ faddr == addr) {
+ *fname = dwarf_decl_file(&die_mem);
+ dwarf_decl_line(&die_mem, lineno);
+ goto out;
+ }
+
+ line = cu_getsrc_die(cu_die, (Dwarf_Addr)addr);
+ if (line && dwarf_lineno(line, lineno) == 0) {
*fname = dwarf_linesrc(line, NULL, NULL);
if (!*fname)
/* line number is useless without filename */
*lineno = 0;
}
+out:
return *lineno ?: -ENOENT;
}
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 19/25] perf probe: Verify given line is a representive line
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (17 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 18/25] perf probe: Show correct statement line number by perf probe -l Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 20/25] perf probe: Do not show non representive lines by perf-probe -L Arnaldo Carvalho de Melo
` (6 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Masami Hiramatsu, Arnaldo Carvalho de Melo,
Ravi Bangoria, Steven Rostedt, Tom Zanussi
From: Masami Hiramatsu <mhiramat@kernel.org>
Verify user given probe line is a representive line (which doesn't share
the address with other lines or the line is the least line among the
lines which shares same address), and if not, it shows what is the
representive line.
Without this fix, user can put a probe on the lines which is not a a
representive line. But since this is not a representive line, perf probe
-l shows a representive line number instead of user given line number.
e.g. (put kernel_read:3, but listed as kernel_read:2)
# perf probe -a kernel_read:3
Added new event:
probe:kernel_read (on kernel_read:3)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
# perf probe -l
probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c)
With this fix, perf probe doesn't allow user to put a probe on a
representive line, and tell what is the representive line.
# perf probe -a kernel_read:3
This line is sharing the addrees with other lines.
Please try to probe at kernel_read:2 instead.
Error: Failed to add events.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406472071.24476.14915451439785001021.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/probe-finder.c | 36 ++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 9ecea45da4ca..ef1b320cedf8 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -776,6 +776,39 @@ static Dwarf_Die *find_best_scope(struct probe_finder *pf, Dwarf_Die *die_mem)
return fsp.found ? die_mem : NULL;
}
+static int verify_representive_line(struct probe_finder *pf, const char *fname,
+ int lineno, Dwarf_Addr addr)
+{
+ const char *__fname, *__func = NULL;
+ Dwarf_Die die_mem;
+ int __lineno;
+
+ /* Verify line number and address by reverse search */
+ if (cu_find_lineinfo(&pf->cu_die, addr, &__fname, &__lineno) < 0)
+ return 0;
+
+ pr_debug2("Reversed line: %s:%d\n", __fname, __lineno);
+ if (strcmp(fname, __fname) || lineno == __lineno)
+ return 0;
+
+ pr_warning("This line is sharing the addrees with other lines.\n");
+
+ if (pf->pev->point.function) {
+ /* Find best match function name and lines */
+ pf->addr = addr;
+ if (find_best_scope(pf, &die_mem)
+ && die_match_name(&die_mem, pf->pev->point.function)
+ && dwarf_decl_line(&die_mem, &lineno) == 0) {
+ __func = dwarf_diename(&die_mem);
+ __lineno -= lineno;
+ }
+ }
+ pr_warning("Please try to probe at %s:%d instead.\n",
+ __func ? : __fname, __lineno);
+
+ return -ENOENT;
+}
+
static int probe_point_line_walker(const char *fname, int lineno,
Dwarf_Addr addr, void *data)
{
@@ -786,6 +819,9 @@ static int probe_point_line_walker(const char *fname, int lineno,
if (lineno != pf->lno || strtailcmp(fname, pf->fname) != 0)
return 0;
+ if (verify_representive_line(pf, fname, lineno, addr))
+ return -ENOENT;
+
pf->addr = addr;
sc_die = find_best_scope(pf, &die_mem);
if (!sc_die) {
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 20/25] perf probe: Do not show non representive lines by perf-probe -L
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (18 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 19/25] perf probe: Verify given line is a representive line Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 21/25] perf probe: Generate event name with line number Arnaldo Carvalho de Melo
` (5 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Masami Hiramatsu, Arnaldo Carvalho de Melo,
Ravi Bangoria, Steven Rostedt, Tom Zanussi
From: Masami Hiramatsu <mhiramat@kernel.org>
Since perf probe -L shows non representive lines, it can be mislead
users where user can put probes. This prevents to show such non
representive lines so that user can understand which lines user can
probe.
# perf probe -L kernel_read
<kernel_read@/build/linux-pvZVvI/linux-5.0.0/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
{
2 mm_segment_t old_fs;
ssize_t result;
old_fs = get_fs();
6 set_fs(get_ds());
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
Committer testing:
Before:
# perf probe -L kernel_read
<kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
1 {
2 mm_segment_t old_fs;
3 ssize_t result;
5 old_fs = get_fs();
6 set_fs(KERNEL_DS);
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
#
See the 1, 3, 5 lines? They shouldn't be there, after this patch:
# perf probe -L kernel_read
<kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
{
2 mm_segment_t old_fs;
ssize_t result;
old_fs = get_fs();
6 set_fs(KERNEL_DS);
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406473064.24476.2913278267727587314.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/probe-finder.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index ef1b320cedf8..f12ad507a822 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -1734,12 +1734,19 @@ static int line_range_walk_cb(const char *fname, int lineno,
void *data)
{
struct line_finder *lf = data;
+ const char *__fname;
+ int __lineno;
int err;
if ((strtailcmp(fname, lf->fname) != 0) ||
(lf->lno_s > lineno || lf->lno_e < lineno))
return 0;
+ /* Make sure this line can be reversable */
+ if (cu_find_lineinfo(&lf->cu_die, addr, &__fname, &__lineno) > 0
+ && (lineno != __lineno || strcmp(fname, __fname)))
+ return 0;
+
err = line_range_add_line(fname, lineno, lf->lr);
if (err < 0 && err != -EEXIST)
return err;
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 21/25] perf probe: Generate event name with line number
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (19 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 20/25] perf probe: Do not show non representive lines by perf-probe -L Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 22/25] perf probe: Support multiprobe event Arnaldo Carvalho de Melo
` (4 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Masami Hiramatsu, Arnaldo Carvalho de Melo,
Ravi Bangoria, Steven Rostedt, Tom Zanussi
From: Masami Hiramatsu <mhiramat@kernel.org>
Generate event name from function name with line number as
<function>_L<line_number>. Note that this is only for the new event
which is defined by the line number of function (except for line 0).
If there is another event on same line, you have to use
"-f" option. In that case, the new event has "_1" suffix.
e.g.
# perf probe -a kernel_read:2
Added new event:
probe:kernel_read_L2 (on kernel_read:2)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read_L2 -aR sleep 1
But if we omit the line number or 0th line, it will
have no suffix.
# perf probe -a kernel_read:0
Added new event:
probe:kernel_read (on kernel_read)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
probe:kernel_read (on kernel_read@linux-5.0.0/fs/read_write.c)
probe:kernel_read_L2 (on kernel_read:2@linux-5.0.0/fs/read_write.c)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406474026.24476.2828897745502059569.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/probe-event.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index e29948b8fcab..5c86d2cf6338 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -1679,6 +1679,14 @@ int parse_perf_probe_command(const char *cmd, struct perf_probe_event *pev)
if (ret < 0)
goto out;
+ /* Generate event name if needed */
+ if (!pev->event && pev->point.function && pev->point.line
+ && !pev->point.lazy_line && !pev->point.offset) {
+ if (asprintf(&pev->event, "%s_L%d", pev->point.function,
+ pev->point.line) < 0)
+ return -ENOMEM;
+ }
+
/* Copy arguments and ensure return probe has no C argument */
pev->nargs = argc - 1;
pev->args = zalloc(sizeof(struct perf_probe_arg) * pev->nargs);
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 22/25] perf probe: Support multiprobe event
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (20 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 21/25] perf probe: Generate event name with line number Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 23/25] perf probe: Support DW_AT_const_value constant value Arnaldo Carvalho de Melo
` (3 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Masami Hiramatsu, Arnaldo Carvalho de Melo,
Ravi Bangoria, Steven Rostedt, Tom Zanussi
From: Masami Hiramatsu <mhiramat@kernel.org>
Support multiprobe event if the event is based on function and lines and
kernel supports it. In this case, perf probe creates the first probe
with an event, and tries to append following probes on that event, since
those probes must be on the same source code line.
Before this patch;
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
#
After this patch (on multiprobe supported kernel)
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18 -aR sleep 1
#
Committer testing:
On a kernel that doesn't support multiprobe events, after this patch:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
# grep append /sys/kernel/debug/tracing/README
be modified by appending '.descending' or '.ascending' to a
can be modified by appending any of the following modifiers
#
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
# perf probe -l
probe:vfs_read_L18 (on vfs_read:18@fs/read_write.c)
probe:vfs_read_L18_1 (on vfs_read:18@fs/read_write.c)
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406475010.24476.586290752591512351.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/probe-event.c | 9 +++++++--
tools/perf/util/probe-file.c | 7 +++++++
tools/perf/util/probe-file.h | 1 +
3 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 5c86d2cf6338..8f963a193a5d 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -2738,8 +2738,13 @@ static int probe_trace_event__set_name(struct probe_trace_event *tev,
if (tev->event == NULL || tev->group == NULL)
return -ENOMEM;
- /* Add added event name to namelist */
- strlist__add(namelist, event);
+ /*
+ * Add new event name to namelist if multiprobe event is NOT
+ * supported, since we have to use new event name for following
+ * probes in that case.
+ */
+ if (!multiprobe_event_is_supported())
+ strlist__add(namelist, event);
return 0;
}
diff --git a/tools/perf/util/probe-file.c b/tools/perf/util/probe-file.c
index b659466ea498..a63f1a19b0e8 100644
--- a/tools/perf/util/probe-file.c
+++ b/tools/perf/util/probe-file.c
@@ -1007,6 +1007,7 @@ enum ftrace_readme {
FTRACE_README_KRETPROBE_OFFSET,
FTRACE_README_UPROBE_REF_CTR,
FTRACE_README_USER_ACCESS,
+ FTRACE_README_MULTIPROBE_EVENT,
FTRACE_README_END,
};
@@ -1020,6 +1021,7 @@ static struct {
DEFINE_TYPE(FTRACE_README_KRETPROBE_OFFSET, "*place (kretprobe): *"),
DEFINE_TYPE(FTRACE_README_UPROBE_REF_CTR, "*ref_ctr_offset*"),
DEFINE_TYPE(FTRACE_README_USER_ACCESS, "*[u]<offset>*"),
+ DEFINE_TYPE(FTRACE_README_MULTIPROBE_EVENT, "*Create/append/*"),
};
static bool scan_ftrace_readme(enum ftrace_readme type)
@@ -1085,3 +1087,8 @@ bool user_access_is_supported(void)
{
return scan_ftrace_readme(FTRACE_README_USER_ACCESS);
}
+
+bool multiprobe_event_is_supported(void)
+{
+ return scan_ftrace_readme(FTRACE_README_MULTIPROBE_EVENT);
+}
diff --git a/tools/perf/util/probe-file.h b/tools/perf/util/probe-file.h
index 986c1c94f64f..850d1b52d60a 100644
--- a/tools/perf/util/probe-file.h
+++ b/tools/perf/util/probe-file.h
@@ -71,6 +71,7 @@ bool probe_type_is_available(enum probe_type type);
bool kretprobe_offset_is_supported(void);
bool uprobe_ref_ctr_is_supported(void);
bool user_access_is_supported(void);
+bool multiprobe_event_is_supported(void);
#else /* ! HAVE_LIBELF_SUPPORT */
static inline struct probe_cache *probe_cache__new(const char *tgt __maybe_unused, struct nsinfo *nsi __maybe_unused)
{
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 23/25] perf probe: Support DW_AT_const_value constant value
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (21 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 22/25] perf probe: Support multiprobe event Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 24/25] perf probe: Trace a magic number if variable is not found Arnaldo Carvalho de Melo
` (2 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Masami Hiramatsu, Ravi Bangoria,
Steven Rostedt, Tom Zanussi, Arnaldo Carvalho de Melo
From: Masami Hiramatsu <mhiramat@kernel.org>
Support DW_AT_const_value for variable assignment instead of location.
Note that this requires ftrace supporting immediate value.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476012.24476.16096289871757175775.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/probe-file.c | 7 +++++++
tools/perf/util/probe-file.h | 1 +
tools/perf/util/probe-finder.c | 11 +++++++++++
3 files changed, 19 insertions(+)
diff --git a/tools/perf/util/probe-file.c b/tools/perf/util/probe-file.c
index a63f1a19b0e8..5003ba403345 100644
--- a/tools/perf/util/probe-file.c
+++ b/tools/perf/util/probe-file.c
@@ -1008,6 +1008,7 @@ enum ftrace_readme {
FTRACE_README_UPROBE_REF_CTR,
FTRACE_README_USER_ACCESS,
FTRACE_README_MULTIPROBE_EVENT,
+ FTRACE_README_IMMEDIATE_VALUE,
FTRACE_README_END,
};
@@ -1022,6 +1023,7 @@ static struct {
DEFINE_TYPE(FTRACE_README_UPROBE_REF_CTR, "*ref_ctr_offset*"),
DEFINE_TYPE(FTRACE_README_USER_ACCESS, "*[u]<offset>*"),
DEFINE_TYPE(FTRACE_README_MULTIPROBE_EVENT, "*Create/append/*"),
+ DEFINE_TYPE(FTRACE_README_IMMEDIATE_VALUE, "*\\imm-value,*"),
};
static bool scan_ftrace_readme(enum ftrace_readme type)
@@ -1092,3 +1094,8 @@ bool multiprobe_event_is_supported(void)
{
return scan_ftrace_readme(FTRACE_README_MULTIPROBE_EVENT);
}
+
+bool immediate_value_is_supported(void)
+{
+ return scan_ftrace_readme(FTRACE_README_IMMEDIATE_VALUE);
+}
diff --git a/tools/perf/util/probe-file.h b/tools/perf/util/probe-file.h
index 850d1b52d60a..0dba88c0f5f0 100644
--- a/tools/perf/util/probe-file.h
+++ b/tools/perf/util/probe-file.h
@@ -72,6 +72,7 @@ bool kretprobe_offset_is_supported(void);
bool uprobe_ref_ctr_is_supported(void);
bool user_access_is_supported(void);
bool multiprobe_event_is_supported(void);
+bool immediate_value_is_supported(void);
#else /* ! HAVE_LIBELF_SUPPORT */
static inline struct probe_cache *probe_cache__new(const char *tgt __maybe_unused, struct nsinfo *nsi __maybe_unused)
{
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index f12ad507a822..33e90054ad84 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -177,6 +177,17 @@ static int convert_variable_location(Dwarf_Die *vr_die, Dwarf_Addr addr,
if (dwarf_attr(vr_die, DW_AT_external, &attr) != NULL)
goto static_var;
+ /* Constant value */
+ if (dwarf_attr(vr_die, DW_AT_const_value, &attr) &&
+ immediate_value_is_supported()) {
+ Dwarf_Sword snum;
+
+ dwarf_formsdata(&attr, &snum);
+ ret = asprintf(&tvar->value, "\\%ld", (long)snum);
+
+ return ret < 0 ? -ENOMEM : 0;
+ }
+
/* TODO: handle more than 1 exprs */
if (dwarf_attr(vr_die, DW_AT_location, &attr) == NULL)
return -EINVAL; /* Broken DIE ? */
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 24/25] perf probe: Trace a magic number if variable is not found
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (22 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 23/25] perf probe: Support DW_AT_const_value constant value Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 25/25] perf parse: Report initial event parsing error Arnaldo Carvalho de Melo
2019-11-19 12:00 ` [GIT PULL] perf/core improvements and fixes Ingo Molnar
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Masami Hiramatsu, Ravi Bangoria,
Steven Rostedt, Tom Zanussi, Arnaldo Carvalho de Melo
From: Masami Hiramatsu <mhiramat@kernel.org>
Trace a magic number as immediate value if the target variable is not
found at some probe points which is based on one probe event.
This feature is good for the case if you trace a source code line with
some local variables, which is compiled into several instructions and
some of the variables are optimized out on some instructions.
Even if so, with this feature, perf probe trace a magic number instead
of such disappeared variables and fold those probes on one event.
E.g. without this patch:
# perf probe -D "pud_page_vaddr pud"
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
p:probe/pud_page_vaddr _text+23480787 pud=%ax:x64
p:probe/pud_page_vaddr _text+23808453 pud=%bp:x64
p:probe/pud_page_vaddr _text+23558082 pud=%ax:x64
p:probe/pud_page_vaddr _text+328373 pud=%r8:x64
p:probe/pud_page_vaddr _text+348448 pud=%bx:x64
p:probe/pud_page_vaddr _text+23816818 pud=%bx:x64
With this patch:
# perf probe -D "pud_page_vaddr pud" | head
spurious_kernel_fault is blacklisted function, skip it.
vmalloc_fault is blacklisted function, skip it.
p:probe/pud_page_vaddr _text+23480787 pud=%ax:x64
p:probe/pud_page_vaddr _text+149051 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23808453 pud=%bp:x64
p:probe/pud_page_vaddr _text+315926 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23807209 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23557365 pud=%ax:x64
p:probe/pud_page_vaddr _text+314097 pud=%di:x64
p:probe/pud_page_vaddr _text+314015 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+313893 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+324083 pud=\deade12d:x64
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476931.24476.6261475888681844285.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/probe-event.c | 2 +-
tools/perf/util/probe-event.h | 3 ++
tools/perf/util/probe-finder.c | 62 +++++++++++++++++++++++++++++++---
tools/perf/util/probe-finder.h | 1 +
4 files changed, 63 insertions(+), 5 deletions(-)
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 8f963a193a5d..52b2d165453a 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -46,7 +46,7 @@
#define PERFPROBE_GROUP "probe"
bool probe_event_dry_run; /* Dry run flag */
-struct probe_conf probe_conf;
+struct probe_conf probe_conf = { .magic_num = DEFAULT_PROBE_MAGIC_NUM };
#define semantic_error(msg ...) pr_err("Semantic error :" msg)
diff --git a/tools/perf/util/probe-event.h b/tools/perf/util/probe-event.h
index 96a319cd2378..4f0eb3a20c36 100644
--- a/tools/perf/util/probe-event.h
+++ b/tools/perf/util/probe-event.h
@@ -16,10 +16,13 @@ struct probe_conf {
bool no_inlines;
bool cache;
int max_probes;
+ unsigned long magic_num;
};
extern struct probe_conf probe_conf;
extern bool probe_event_dry_run;
+#define DEFAULT_PROBE_MAGIC_NUM 0xdeade12d /* u32: 3735937325 */
+
struct symbol;
/* kprobe-tracer and uprobe-tracer tracing point */
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 33e90054ad84..38d6cd22779f 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -536,6 +536,14 @@ static int convert_variable_fields(Dwarf_Die *vr_die, const char *varname,
return 0;
}
+static void print_var_not_found(const char *varname)
+{
+ pr_err("Failed to find the location of the '%s' variable at this address.\n"
+ " Perhaps it has been optimized out.\n"
+ " Use -V with the --range option to show '%s' location range.\n",
+ varname, varname);
+}
+
/* Show a variables in kprobe event format */
static int convert_variable(Dwarf_Die *vr_die, struct probe_finder *pf)
{
@@ -547,11 +555,11 @@ static int convert_variable(Dwarf_Die *vr_die, struct probe_finder *pf)
ret = convert_variable_location(vr_die, pf->addr, pf->fb_ops,
&pf->sp_die, pf->machine, pf->tvar);
+ if (ret == -ENOENT && pf->skip_empty_arg)
+ /* This can be found in other place. skip it */
+ return 0;
if (ret == -ENOENT || ret == -EINVAL) {
- pr_err("Failed to find the location of the '%s' variable at this address.\n"
- " Perhaps it has been optimized out.\n"
- " Use -V with the --range option to show '%s' location range.\n",
- pf->pvar->var, pf->pvar->var);
+ print_var_not_found(pf->pvar->var);
} else if (ret == -ENOTSUP)
pr_err("Sorry, we don't support this variable location yet.\n");
else if (ret == 0 && pf->pvar->field) {
@@ -598,6 +606,8 @@ static int find_variable(Dwarf_Die *sc_die, struct probe_finder *pf)
/* Search again in global variables */
if (!die_find_variable_at(&pf->cu_die, pf->pvar->var,
0, &vr_die)) {
+ if (pf->skip_empty_arg)
+ return 0;
pr_warning("Failed to find '%s' in this function.\n",
pf->pvar->var);
ret = -ENOENT;
@@ -1384,6 +1394,44 @@ static int add_probe_trace_event(Dwarf_Die *sc_die, struct probe_finder *pf)
return ret;
}
+static int fill_empty_trace_arg(struct perf_probe_event *pev,
+ struct probe_trace_event *tevs, int ntevs)
+{
+ char **valp;
+ char *type;
+ int i, j, ret;
+
+ for (i = 0; i < pev->nargs; i++) {
+ type = NULL;
+ for (j = 0; j < ntevs; j++) {
+ if (tevs[j].args[i].value) {
+ type = tevs[j].args[i].type;
+ break;
+ }
+ }
+ if (j == ntevs) {
+ print_var_not_found(pev->args[i].var);
+ return -ENOENT;
+ }
+ for (j = 0; j < ntevs; j++) {
+ valp = &tevs[j].args[i].value;
+ if (*valp)
+ continue;
+
+ ret = asprintf(valp, "\\%lx", probe_conf.magic_num);
+ if (ret < 0)
+ return -ENOMEM;
+ /* Note that type can be NULL */
+ if (type) {
+ tevs[j].args[i].type = strdup(type);
+ if (!tevs[j].args[i].type)
+ return -ENOMEM;
+ }
+ }
+ }
+ return 0;
+}
+
/* Find probe_trace_events specified by perf_probe_event from debuginfo */
int debuginfo__find_trace_events(struct debuginfo *dbg,
struct perf_probe_event *pev,
@@ -1402,7 +1450,13 @@ int debuginfo__find_trace_events(struct debuginfo *dbg,
tf.tevs = *tevs;
tf.ntevs = 0;
+ if (pev->nargs != 0 && immediate_value_is_supported())
+ tf.pf.skip_empty_arg = true;
+
ret = debuginfo__find_probes(dbg, &tf.pf);
+ if (ret >= 0 && tf.pf.skip_empty_arg)
+ ret = fill_empty_trace_arg(pev, tf.tevs, tf.ntevs);
+
if (ret < 0) {
for (i = 0; i < tf.ntevs; i++)
clear_probe_trace_event(&tf.tevs[i]);
diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h
index 670c477bf8cf..11be10080613 100644
--- a/tools/perf/util/probe-finder.h
+++ b/tools/perf/util/probe-finder.h
@@ -87,6 +87,7 @@ struct probe_finder {
unsigned int machine; /* Target machine arch */
struct perf_probe_arg *pvar; /* Current target variable */
struct probe_trace_arg *tvar; /* Current result variable */
+ bool skip_empty_arg; /* Skip non-exist args */
};
struct trace_event_finder {
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 25/25] perf parse: Report initial event parsing error
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (23 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 24/25] perf probe: Trace a magic number if variable is not found Arnaldo Carvalho de Melo
@ 2019-11-19 11:32 ` Arnaldo Carvalho de Melo
2019-11-19 12:00 ` [GIT PULL] perf/core improvements and fixes Ingo Molnar
25 siblings, 0 replies; 27+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-19 11:32 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner
Cc: Jiri Olsa, Namhyung Kim, Clark Williams, linux-kernel,
linux-perf-users, Ian Rogers, Arnaldo Carvalho de Melo,
Adrian Hunter, Alexander Shishkin, Allison Randal, Andi Kleen,
Anju T Sudhakar, Christian Borntraeger, Davidlohr Bueso, Jin Yao,
Jiri Olsa, Mark Rutland, Peter Zijlstra, Ravi Bangoria,
Stephane Eranian, Thomas Richter
From: Ian Rogers <irogers@google.com>
Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:
https://lkml.org/lkml/2019/10/28/680
An example error is:
$ tools/perf/perf stat -e c/c/
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Initial error:
event syntax error: 'c/c/'
\___ Cannot find PMU `c'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/arch/powerpc/util/kvm-stat.c | 4 +-
tools/perf/builtin-stat.c | 2 +
tools/perf/builtin-trace.c | 16 +++--
tools/perf/tests/parse-events.c | 3 +-
tools/perf/util/metricgroup.c | 2 +-
tools/perf/util/parse-events.c | 78 ++++++++++++++++++-------
tools/perf/util/parse-events.h | 4 ++
7 files changed, 80 insertions(+), 29 deletions(-)
diff --git a/tools/perf/arch/powerpc/util/kvm-stat.c b/tools/perf/arch/powerpc/util/kvm-stat.c
index 9cc1c4a9dec4..16807269317c 100644
--- a/tools/perf/arch/powerpc/util/kvm-stat.c
+++ b/tools/perf/arch/powerpc/util/kvm-stat.c
@@ -113,10 +113,10 @@ static int is_tracepoint_available(const char *str, struct evlist *evlist)
struct parse_events_error err;
int ret;
- err.str = NULL;
+ bzero(&err, sizeof(err));
ret = parse_events(evlist, str, &err);
if (err.str)
- pr_err("%s : %s\n", str, err.str);
+ parse_events_print_error(&err, "tracepoint");
return ret;
}
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 5964e808d73d..0a15253b438c 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -1307,6 +1307,7 @@ static int add_default_attributes(void)
if (stat_config.null_run)
return 0;
+ bzero(&errinfo, sizeof(errinfo));
if (transaction_run) {
/* Handle -T as -M transaction. Once platform specific metrics
* support has been added to the json files, all archictures
@@ -1364,6 +1365,7 @@ static int add_default_attributes(void)
return -1;
}
if (err) {
+ parse_events_print_error(&errinfo, smi_cost_attrs);
fprintf(stderr, "Cannot set up SMI cost events\n");
return -1;
}
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 43c05eae1768..46a72ecac427 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -3016,11 +3016,18 @@ static bool evlist__add_vfs_getname(struct evlist *evlist)
{
bool found = false;
struct evsel *evsel, *tmp;
- struct parse_events_error err = { .idx = 0, };
- int ret = parse_events(evlist, "probe:vfs_getname*", &err);
+ struct parse_events_error err;
+ int ret;
- if (ret)
+ bzero(&err, sizeof(err));
+ ret = parse_events(evlist, "probe:vfs_getname*", &err);
+ if (ret) {
+ free(err.str);
+ free(err.help);
+ free(err.first_str);
+ free(err.first_help);
return false;
+ }
evlist__for_each_entry_safe(evlist, evsel, tmp) {
if (!strstarts(perf_evsel__name(evsel), "probe:vfs_getname"))
@@ -4832,8 +4839,9 @@ int cmd_trace(int argc, const char **argv)
* wrong in more detail.
*/
if (trace.perfconfig_events != NULL) {
- struct parse_events_error parse_err = { .idx = 0, };
+ struct parse_events_error parse_err;
+ bzero(&parse_err, sizeof(parse_err));
err = parse_events(trace.evlist, trace.perfconfig_events, &parse_err);
if (err) {
parse_events_print_error(&parse_err, trace.perfconfig_events);
diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c
index 25e0ed2eedfc..091c3aeccc27 100644
--- a/tools/perf/tests/parse-events.c
+++ b/tools/perf/tests/parse-events.c
@@ -1768,10 +1768,11 @@ static struct terms_test test__terms[] = {
static int test_event(struct evlist_test *e)
{
- struct parse_events_error err = { .idx = 0, };
+ struct parse_events_error err;
struct evlist *evlist;
int ret;
+ bzero(&err, sizeof(err));
if (e->valid && !e->valid()) {
pr_debug("... SKIP");
return 0;
diff --git a/tools/perf/util/metricgroup.c b/tools/perf/util/metricgroup.c
index a7c0424dbda3..6a4d350d5cdb 100644
--- a/tools/perf/util/metricgroup.c
+++ b/tools/perf/util/metricgroup.c
@@ -523,7 +523,7 @@ int metricgroup__parse_groups(const struct option *opt,
if (ret)
return ret;
pr_debug("adding %s\n", extra_events.buf);
- memset(&parse_error, 0, sizeof(struct parse_events_error));
+ bzero(&parse_error, sizeof(parse_error));
ret = parse_events(perf_evlist, extra_events.buf, &parse_error);
if (ret) {
parse_events_print_error(&parse_error, extra_events.buf);
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 6d18ff9bce49..6bae9d6edc12 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -189,12 +189,29 @@ void parse_events__handle_error(struct parse_events_error *err, int idx,
free(help);
return;
}
- WARN_ONCE(err->str, "WARNING: multiple event parsing errors\n");
- err->idx = idx;
- free(err->str);
- err->str = str;
- free(err->help);
- err->help = help;
+ switch (err->num_errors) {
+ case 0:
+ err->idx = idx;
+ err->str = str;
+ err->help = help;
+ break;
+ case 1:
+ err->first_idx = err->idx;
+ err->idx = idx;
+ err->first_str = err->str;
+ err->str = str;
+ err->first_help = err->help;
+ err->help = help;
+ break;
+ default:
+ WARN_ONCE(1, "WARNING: multiple event parsing errors\n");
+ free(err->str);
+ err->str = str;
+ free(err->help);
+ err->help = help;
+ break;
+ }
+ err->num_errors++;
}
struct tracepoint_path *tracepoint_id_to_path(u64 config)
@@ -1349,7 +1366,7 @@ int parse_events_add_pmu(struct parse_events_state *parse_state,
if (asprintf(&err_str,
"Cannot find PMU `%s'. Missing kernel support?",
name) >= 0)
- parse_events__handle_error(err, -1, err_str, NULL);
+ parse_events__handle_error(err, 0, err_str, NULL);
return -EINVAL;
}
@@ -2007,15 +2024,14 @@ static int get_term_width(void)
return ws.ws_col > MAX_WIDTH ? MAX_WIDTH : ws.ws_col;
}
-void parse_events_print_error(struct parse_events_error *err,
- const char *event)
+static void __parse_events_print_error(int err_idx, const char *err_str,
+ const char *err_help, const char *event)
{
const char *str = "invalid or unsupported event: ";
char _buf[MAX_WIDTH];
char *buf = (char *) event;
int idx = 0;
-
- if (err->str) {
+ if (err_str) {
/* -2 for extra '' in the final fprintf */
int width = get_term_width() - 2;
int len_event = strlen(event);
@@ -2038,8 +2054,8 @@ void parse_events_print_error(struct parse_events_error *err,
buf = _buf;
/* We're cutting from the beginning. */
- if (err->idx > max_err_idx)
- cut = err->idx - max_err_idx;
+ if (err_idx > max_err_idx)
+ cut = err_idx - max_err_idx;
strncpy(buf, event + cut, max_len);
@@ -2052,16 +2068,33 @@ void parse_events_print_error(struct parse_events_error *err,
buf[max_len] = 0;
}
- idx = len_str + err->idx - cut;
+ idx = len_str + err_idx - cut;
}
fprintf(stderr, "%s'%s'\n", str, buf);
if (idx) {
- fprintf(stderr, "%*s\\___ %s\n", idx + 1, "", err->str);
- if (err->help)
- fprintf(stderr, "\n%s\n", err->help);
- zfree(&err->str);
- zfree(&err->help);
+ fprintf(stderr, "%*s\\___ %s\n", idx + 1, "", err_str);
+ if (err_help)
+ fprintf(stderr, "\n%s\n", err_help);
+ }
+}
+
+void parse_events_print_error(struct parse_events_error *err,
+ const char *event)
+{
+ if (!err->num_errors)
+ return;
+
+ __parse_events_print_error(err->idx, err->str, err->help, event);
+ zfree(&err->str);
+ zfree(&err->help);
+
+ if (err->num_errors > 1) {
+ fputs("\nInitial error:\n", stderr);
+ __parse_events_print_error(err->first_idx, err->first_str,
+ err->first_help, event);
+ zfree(&err->first_str);
+ zfree(&err->first_help);
}
}
@@ -2071,8 +2104,11 @@ int parse_events_option(const struct option *opt, const char *str,
int unset __maybe_unused)
{
struct evlist *evlist = *(struct evlist **)opt->value;
- struct parse_events_error err = { .idx = 0, };
- int ret = parse_events(evlist, str, &err);
+ struct parse_events_error err;
+ int ret;
+
+ bzero(&err, sizeof(err));
+ ret = parse_events(evlist, str, &err);
if (ret) {
parse_events_print_error(&err, str);
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index 5ee8ac93840c..ff367f248fe8 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -110,9 +110,13 @@ struct parse_events_term {
};
struct parse_events_error {
+ int num_errors; /* number of errors encountered */
int idx; /* index in the parsed string */
char *str; /* string to display at the index */
char *help; /* optional help string */
+ int first_idx;/* as above, but for the first encountered error */
+ char *first_str;
+ char *first_help;
};
struct parse_events_state {
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [GIT PULL] perf/core improvements and fixes
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (24 preceding siblings ...)
2019-11-19 11:32 ` [PATCH 25/25] perf parse: Report initial event parsing error Arnaldo Carvalho de Melo
@ 2019-11-19 12:00 ` Ingo Molnar
25 siblings, 0 replies; 27+ messages in thread
From: Ingo Molnar @ 2019-11-19 12:00 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: Thomas Gleixner, Jiri Olsa, Namhyung Kim, Clark Williams,
linux-kernel, linux-perf-users, Adrian Hunter, Ian Rogers,
James Clark, Konstantin Khlebnikov, Masami Hiramatsu,
Arnaldo Carvalho de Melo
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> Hi Ingo/Thomas,
>
> Please consider pulling,
>
> Best regards,
>
> - Arnaldo
>
>
> The following changes since commit e1e9b78d3957a267346a86c8f2c433f6a332af65:
>
> perf parse: Use YYABORT to clear stack after failure, plugging leaks (2019-11-12 08:34:16 -0300)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-5.5-20191119
>
> for you to fetch changes up to a910e4666d61712840c78de33cc7f89de8affa78:
>
> perf parse: Report initial event parsing error (2019-11-18 19:14:29 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> x86/insn:
>
> Adrian Hunter:
>
> - Add some more Intel instructions to the opcode map:
>
> cldemote, encls, enclu, enclv, enqcmd, enqcmds, movdir64b,
> movdiri, pconfig, tpause, umonitor, umwait, wbnoinvd.
>
> - The instruction decoding can be tested using the perf tools'
> "x86 instruction decoder - new instructions" test as folllows:
>
> $ perf test -v "new " 2>&1 | grep -i cldemote
> Decoded ok: 0f 1c 00 cldemote (%eax)
> Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
> Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
> Decoded ok: 0f 1c 00 cldemote (%rax)
> Decoded ok: 41 0f 1c 00 cldemote (%r8)
> Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
> Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
> Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
> $ perf test -v "new " 2>&1 | grep -i tpause
> Decoded ok: 66 0f ae f3 tpause %ebx
> Decoded ok: 66 0f ae f3 tpause %ebx
> Decoded ok: 66 41 0f ae f0 tpause %r8d
>
> callchains:
>
> Adrian Hunter:
>
> - Fix segfault in thread__resolve_callchain_sample().
>
> perf probe:
>
> - Line fixes to show only lines where probes can be used with 'perf probe -L',
> and when reporting them via 'perf probe -l'.
>
> - Support multiprobe events.
>
> perf scripts python:
>
> Adrian Hunter:
>
> - Fix use of TRUE with SQLite < 3.23 in exported-sql-viewer.py.
>
> perf maps:
>
> - Trim 'struct map' by removing the rb_node member for sorting
> by map name, as that is only needed for processing kernel maps,
> and only when classifying symbols by section at load time.
> Sort them by name using qsort() and do lookups using bsearch()
> when map_groups__find_by_name() is used.
>
> perf parse:
>
> Ian Rogers:
>
> - Report initial event parsing error, providing a less cryptic message
> to state that a PMU wasn't found in the system.
>
> perf vendor events:
>
> James Clark:
>
> - Fix commas so that PMU event files for arm64, power8 and power nine
> become valid JSON.
>
> libtraceevent:
>
> Konstantin Khlebnikov:
>
> - Fix parsing of event %o and %X argument types.
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> 66 files changed, 2888 insertions(+), 2366 deletions(-)
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2019-11-19 12:00 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-19 11:32 [GIT PULL] perf/core improvements and fixes Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 01/25] perf vendor events arm64: Fix commas so PMU event files are valid JSON Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 02/25] perf vendor events power8: " Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 03/25] perf vendor events power9: " Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 04/25] perf scripts python: exported-sql-viewer.py: Fix use of TRUE with SQLite Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 05/25] perf maps: Purge the entries from maps->names in __maps__purge() Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 06/25] perf maps: Do not use an rbtree to sort by map name Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 07/25] perf map_groups: Add a front end cache for map lookups by name Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 08/25] perf map: No need to adjust the long name of modules Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 09/25] perf record: No need to process the synthesized MMAP events twice Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 10/25] perf machine: No need to check if kernel module maps pre-exist Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 11/25] perf map_groups: Auto sort maps by name, if needed Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 12/25] perf callchain: Fix segfault in thread__resolve_callchain_sample() Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 13/25] libtraceevent: Fix parsing of event %o and %X argument types Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 14/25] perf map: Use bitmap for booleans Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 15/25] perf map: Move seldom used ->flags field to second cacheline Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 16/25] x86/insn: perf tools: Add some instructions to the new instructions test Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 17/25] x86/insn: Add some Intel instructions to the opcode map Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 18/25] perf probe: Show correct statement line number by perf probe -l Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 19/25] perf probe: Verify given line is a representive line Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 20/25] perf probe: Do not show non representive lines by perf-probe -L Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 21/25] perf probe: Generate event name with line number Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 22/25] perf probe: Support multiprobe event Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 23/25] perf probe: Support DW_AT_const_value constant value Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 24/25] perf probe: Trace a magic number if variable is not found Arnaldo Carvalho de Melo
2019-11-19 11:32 ` [PATCH 25/25] perf parse: Report initial event parsing error Arnaldo Carvalho de Melo
2019-11-19 12:00 ` [GIT PULL] perf/core improvements and fixes Ingo Molnar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).