linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiada Wang <jiada_wang@mentor.com>
To: <jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
	<rydberg@bitmath.org>, <dmitry.torokhov@gmail.com>,
	<nick@shmanahar.org>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<erosca@de.adit-jv.com>, <Andrew_Gabbasov@mentor.com>,
	<jiada_wang@mentor.com>
Subject: [PATCH v6 07/48] Input: atmel_mxt_ts - implement T9 vector/orientation support
Date: Fri, 22 Nov 2019 17:23:21 +0900	[thread overview]
Message-ID: <20191122082402.18173-8-jiada_wang@mentor.com> (raw)
In-Reply-To: <20191122082402.18173-1-jiada_wang@mentor.com>

From: Nick Dyer <nick.dyer@itdev.co.uk>

The atmel touch messages contain orientation information as a byte in a
packed format which can be passed straight on to Android if the input
device configuration is correct.

This requires vector reports to be enabled in maXTouch config (zero
DISVECT bit 3 in T9 CTRL field)

Android converts the format in InputReader.cpp, search for
ORIENTATION_CALIBRATION_VECTOR.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit a6f0ee919d2631678169b23fb18f55b6dbabcd4c)
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 4e0dae004927..405bff1c2055 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -817,6 +817,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 	int y;
 	int area;
 	int amplitude;
+	u8 vector;
 
 	id = message[0] - data->T9_reportid_min;
 	status = message[1];
@@ -831,9 +832,10 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 
 	area = message[5];
 	amplitude = message[6];
+	vector = message[7];
 
 	dev_dbg(dev,
-		"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
+		"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u vector: %02X\n",
 		id,
 		(status & MXT_T9_DETECT) ? 'D' : '.',
 		(status & MXT_T9_PRESS) ? 'P' : '.',
@@ -843,7 +845,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 		(status & MXT_T9_AMP) ? 'A' : '.',
 		(status & MXT_T9_SUPPRESS) ? 'S' : '.',
 		(status & MXT_T9_UNGRIP) ? 'U' : '.',
-		x, y, area, amplitude);
+		x, y, area, amplitude, vector);
 
 	input_mt_slot(input_dev, id);
 
@@ -868,6 +870,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
 		input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude);
 		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
+		input_report_abs(input_dev, ABS_MT_ORIENTATION, vector);
 	} else {
 		/* Touch no longer active, close out slot */
 		input_mt_report_slot_inactive(input_dev);
@@ -2180,8 +2183,9 @@ static int mxt_initialize_input_device(struct mxt_data *data)
 				     0, 255, 0, 0);
 	}
 
-	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
-	    data->t100_aux_vect) {
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_vect)) {
 		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
 				     0, 255, 0, 0);
 	}
-- 
2.17.1


  parent reply	other threads:[~2019-11-22  8:24 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-22  8:23 [PATCH v6 00/48] atmel_mxt_ts misc Jiada Wang
2019-11-22  8:23 ` [PATCH v6 01/48] Input: introduce input_mt_report_slot_inactive Jiada Wang
2019-11-22  8:23 ` [PATCH v6 02/48] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2019-11-22  8:23 ` [PATCH v6 03/48] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2019-11-22  8:23 ` [PATCH v6 04/48] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2019-11-22  8:23 ` [PATCH v6 05/48] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2019-11-22  8:23 ` [PATCH v6 06/48] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2019-11-22  8:23 ` Jiada Wang [this message]
2019-11-22  8:23 ` [PATCH v6 08/48] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2019-11-22  8:23 ` [PATCH v6 09/48] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2019-11-22  8:23 ` [PATCH v6 10/48] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2019-11-22  8:23 ` [PATCH v6 11/48] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2019-11-22  8:23 ` [PATCH v6 12/48] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2019-11-22  8:23 ` [PATCH v6 13/48] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2019-11-22  8:23 ` [PATCH v6 14/48] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2019-11-22  8:23 ` [PATCH v6 15/48] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2019-11-22  8:23 ` [PATCH v6 16/48] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2019-11-22  8:23 ` [PATCH v6 17/48] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2019-11-22  8:23 ` [PATCH v6 18/48] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2019-11-22  8:23 ` [PATCH v6 19/48] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2019-11-22  8:23 ` [PATCH v6 20/48] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2019-11-22  8:23 ` [PATCH v6 21/48] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2019-11-22  8:23 ` [PATCH v6 22/48] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2019-11-22  8:23 ` [PATCH v6 23/48] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2019-11-22  8:23 ` [PATCH v6 24/48] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-01-27 17:41   ` Bartosz Szczepanek
2020-01-29 11:52     ` Wang, Jiada (ESD)
2020-02-12  8:39     ` Wang, Jiada
2019-11-22  8:23 ` [PATCH v6 25/48] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2019-11-22  8:23 ` [PATCH v6 26/48] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2019-11-22  8:23 ` [PATCH v6 27/48] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2019-11-22  8:23 ` [PATCH v6 28/48] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2019-11-22  8:23 ` [PATCH v6 29/48] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2019-11-22  8:23 ` [PATCH v6 30/48] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2019-11-22  8:23 ` [PATCH v6 31/48] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2019-11-22  8:23 ` [PATCH v6 32/48] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2019-11-22  8:23 ` [PATCH v6 33/48] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2019-11-22  8:23 ` [PATCH v6 34/48] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2019-11-22  8:23 ` [PATCH v6 35/48] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2019-11-22  8:23 ` [PATCH v6 36/48] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2019-11-22  8:23 ` [PATCH v6 37/48] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2019-11-22  8:23 ` [PATCH v6 38/48] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2019-11-22  8:23 ` [PATCH v6 39/48] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2019-11-22  8:23 ` [PATCH v6 40/48] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2019-11-22  8:23 ` [PATCH v6 41/48] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2019-11-22  8:23 ` [PATCH v6 42/48] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2019-11-22  8:23 ` [PATCH v6 43/48] Input: Atmel: use T44 object to process " Jiada Wang
2019-11-22  8:23 ` [PATCH v6 44/48] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2019-11-22  8:23 ` [PATCH v6 45/48] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2019-11-22  8:24 ` [PATCH v6 46/48] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2019-11-22  8:24 ` [PATCH v6 47/48] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2019-11-22  8:24 ` [PATCH v6 48/48] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang
2020-01-10 12:04 ` [PATCH v6 00/48] atmel_mxt_ts misc Jiada Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191122082402.18173-8-jiada_wang@mentor.com \
    --to=jiada_wang@mentor.com \
    --cc=Andrew_Gabbasov@mentor.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=erosca@de.adit-jv.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nick@shmanahar.org \
    --cc=rydberg@bitmath.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).