From: Marco Felsch <m.felsch@pengutronix.de>
To: bgolaszewski@baylibre.com, linus.walleij@linaro.org,
support.opensource@diasemi.com, lee.jones@linaro.org,
robh+dt@kernel.org, lgirdwood@gmail.com, broonie@kernel.org,
stwiss.opensource@diasemi.com,
Adam.Thomson.Opensource@diasemi.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@pengutronix.de
Subject: [PATCH v2 3/5] regulator: da9062: add voltage selection gpio support
Date: Wed, 27 Nov 2019 14:59:30 +0100 [thread overview]
Message-ID: <20191127135932.7223-4-m.felsch@pengutronix.de> (raw)
In-Reply-To: <20191127135932.7223-1-m.felsch@pengutronix.de>
The DA9062/1 devices can switch their regulator voltages between
voltage-A (active) and voltage-B (suspend) settings. Switching the
voltages can be controlled by ther internal state-machine or by a gpio
input signal and can be configured for each individual regulator. This
commit adds the gpio-based voltage switching support.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
Changelog:
v2:
- use new public api gpiod_to_offset()
- add -ENOENT error check to mimic devm_gpio_optional
- add local gpio check for hardening the code
drivers/regulator/da9062-regulator.c | 164 +++++++++++++++++++++++++++
1 file changed, 164 insertions(+)
diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
index 710e67081d53..f545ae39352e 100644
--- a/drivers/regulator/da9062-regulator.c
+++ b/drivers/regulator/da9062-regulator.c
@@ -7,6 +7,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -50,6 +51,7 @@ struct da9062_regulator_info {
struct reg_field sleep;
struct reg_field suspend_sleep;
unsigned int suspend_vsel_reg;
+ struct reg_field vsel_gpi;
/* Event detection bit */
struct reg_field oc_event;
};
@@ -65,6 +67,7 @@ struct da9062_regulator {
struct regmap_field *suspend;
struct regmap_field *sleep;
struct regmap_field *suspend_sleep;
+ struct regmap_field *vsel_gpi;
};
/* Encapsulates all information for the regulators driver */
@@ -351,6 +354,81 @@ static const struct regulator_ops da9062_ldo_ops = {
.set_suspend_mode = da9062_ldo_set_suspend_mode,
};
+static int da9062_config_gpi(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg, const char *gpi_id)
+{
+ struct da9062_regulator *regl = cfg->driver_data;
+ struct device *hw = regl->hw->dev;
+ struct device_node *gpio_np;
+ struct gpio_desc *gpi;
+ unsigned int nr;
+ int ret;
+ char *prop, *label;
+
+ prop = kasprintf(GFP_KERNEL, "dlg,%s-sense-gpios", gpi_id);
+ if (!prop)
+ return -ENOMEM;
+
+ label = kasprintf(GFP_KERNEL, "%s-%s-gpi", desc->name, gpi_id);
+ if (!label) {
+ ret = -ENOMEM;
+ goto free;
+ }
+
+ /*
+ * We only must ensure that the gpio device is probed before the
+ * regulator driver so no need to store the reference global. Luckily
+ * devm_* releases the gpio upon a remove action. The gpio's are
+ * optional so we need to check for ENOENT. Also we need to check for
+ * the GPIOLIB support. Do nothing if the property or the gpiolib is
+ * missing.
+ */
+ gpi = devm_gpiod_get_from_of_node(cfg->dev, np, prop, 0, GPIOD_IN |
+ GPIOD_FLAGS_BIT_NONEXCLUSIVE, label);
+ if (IS_ERR(gpi)) {
+ ret = PTR_ERR(gpi);
+ if (ret == -ENOENT || ret == -ENOSYS)
+ ret = 0;
+ goto free;
+ }
+
+ /*
+ * Only local gpios are valid. The gpio-controller is within the
+ * mfd-root node.
+ */
+ gpio_np = of_parse_phandle(np, prop, 0);
+ if (gpio_np != hw->of_node) {
+ of_node_put(gpio_np);
+ dev_err(hw, "Failed to request %s.\n", prop);
+ ret = -EINVAL;
+ goto free;
+ }
+ of_node_put(gpio_np);
+
+ /* We need the local number */
+ nr = gpiod_to_offset(gpi);
+ if (nr < 1 || nr > 3) {
+ ret = -EINVAL;
+ goto free;
+ }
+
+ ret = regmap_field_write(regl->vsel_gpi, nr);
+
+free:
+ kfree(prop);
+ kfree(label);
+
+ return ret;
+}
+
+static int da9062_parse_dt(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg)
+{
+ return da9062_config_gpi(np, desc, cfg, "vsel");
+}
+
/* DA9061 Regulator information */
static const struct da9062_regulator_info local_da9061_regulator_info[] = {
{
@@ -358,6 +436,7 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
.desc.name = "DA9061 BUCK1",
.desc.of_match = of_match_ptr("buck1"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_buck_ops,
.desc.min_uV = (300) * 1000,
.desc.uV_step = (10) * 1000,
@@ -388,12 +467,17 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK1_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_BUCK1_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_BUCK1_CONT,
+ __builtin_ffs((int)DA9062AA_VBUCK1_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VBUCK1_GPI_MASK) - 1),
},
{
.desc.id = DA9061_ID_BUCK2,
.desc.name = "DA9061 BUCK2",
.desc.of_match = of_match_ptr("buck2"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_buck_ops,
.desc.min_uV = (800) * 1000,
.desc.uV_step = (20) * 1000,
@@ -424,12 +508,17 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK3_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_BUCK3_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_BUCK3_CONT,
+ __builtin_ffs((int)DA9062AA_VBUCK3_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VBUCK3_GPI_MASK) - 1),
},
{
.desc.id = DA9061_ID_BUCK3,
.desc.name = "DA9061 BUCK3",
.desc.of_match = of_match_ptr("buck3"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_buck_ops,
.desc.min_uV = (530) * 1000,
.desc.uV_step = (10) * 1000,
@@ -460,12 +549,17 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK4_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_BUCK4_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_BUCK4_CONT,
+ __builtin_ffs((int)DA9062AA_VBUCK4_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VBUCK4_GPI_MASK) - 1),
},
{
.desc.id = DA9061_ID_LDO1,
.desc.name = "DA9061 LDO1",
.desc.of_match = of_match_ptr("ldo1"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
@@ -489,6 +583,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_LDO1_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_LDO1_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_LDO1_CONT,
+ __builtin_ffs((int)DA9062AA_VLDO1_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VLDO1_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -499,6 +597,7 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
.desc.name = "DA9061 LDO2",
.desc.of_match = of_match_ptr("ldo2"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
@@ -522,6 +621,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_LDO2_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_LDO2_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_LDO2_CONT,
+ __builtin_ffs((int)DA9062AA_VLDO2_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VLDO2_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -532,6 +635,7 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
.desc.name = "DA9061 LDO3",
.desc.of_match = of_match_ptr("ldo3"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
@@ -555,6 +659,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_LDO3_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_LDO3_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_LDO3_CONT,
+ __builtin_ffs((int)DA9062AA_VLDO3_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VLDO3_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -565,6 +673,7 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
.desc.name = "DA9061 LDO4",
.desc.of_match = of_match_ptr("ldo4"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
@@ -588,6 +697,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_LDO4_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_LDO4_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_LDO4_CONT,
+ __builtin_ffs((int)DA9062AA_VLDO4_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VLDO4_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -602,6 +715,7 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.name = "DA9062 BUCK1",
.desc.of_match = of_match_ptr("buck1"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_buck_ops,
.desc.min_uV = (300) * 1000,
.desc.uV_step = (10) * 1000,
@@ -632,12 +746,17 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK1_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_BUCK1_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_BUCK1_CONT,
+ __builtin_ffs((int)DA9062AA_VBUCK1_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VBUCK1_GPI_MASK) - 1),
},
{
.desc.id = DA9062_ID_BUCK2,
.desc.name = "DA9062 BUCK2",
.desc.of_match = of_match_ptr("buck2"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_buck_ops,
.desc.min_uV = (300) * 1000,
.desc.uV_step = (10) * 1000,
@@ -668,12 +787,17 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK2_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_BUCK2_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_BUCK2_CONT,
+ __builtin_ffs((int)DA9062AA_VBUCK2_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VBUCK2_GPI_MASK) - 1),
},
{
.desc.id = DA9062_ID_BUCK3,
.desc.name = "DA9062 BUCK3",
.desc.of_match = of_match_ptr("buck3"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_buck_ops,
.desc.min_uV = (800) * 1000,
.desc.uV_step = (20) * 1000,
@@ -704,12 +828,17 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK3_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_BUCK3_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_BUCK3_CONT,
+ __builtin_ffs((int)DA9062AA_VBUCK3_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VBUCK3_GPI_MASK) - 1),
},
{
.desc.id = DA9062_ID_BUCK4,
.desc.name = "DA9062 BUCK4",
.desc.of_match = of_match_ptr("buck4"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_buck_ops,
.desc.min_uV = (530) * 1000,
.desc.uV_step = (10) * 1000,
@@ -740,12 +869,17 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK4_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_BUCK4_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_BUCK4_CONT,
+ __builtin_ffs((int)DA9062AA_VBUCK4_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VBUCK4_GPI_MASK) - 1),
},
{
.desc.id = DA9062_ID_LDO1,
.desc.name = "DA9062 LDO1",
.desc.of_match = of_match_ptr("ldo1"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
@@ -769,6 +903,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_LDO1_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_LDO1_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_LDO1_CONT,
+ __builtin_ffs((int)DA9062AA_VLDO1_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VLDO1_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -779,6 +917,7 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.name = "DA9062 LDO2",
.desc.of_match = of_match_ptr("ldo2"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
@@ -802,6 +941,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_LDO2_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_LDO2_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_LDO2_CONT,
+ __builtin_ffs((int)DA9062AA_VLDO2_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VLDO2_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -812,6 +955,7 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.name = "DA9062 LDO3",
.desc.of_match = of_match_ptr("ldo3"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
@@ -835,6 +979,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_LDO3_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_LDO3_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_LDO3_CONT,
+ __builtin_ffs((int)DA9062AA_VLDO3_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VLDO3_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -845,6 +993,7 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.name = "DA9062 LDO4",
.desc.of_match = of_match_ptr("ldo4"),
.desc.regulators_node = of_match_ptr("regulators"),
+ .desc.of_parse_cb = da9062_parse_dt,
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
@@ -868,6 +1017,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_LDO4_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_LDO4_CONF_MASK) - 1),
+ .vsel_gpi = REG_FIELD(DA9062AA_LDO4_CONT,
+ __builtin_ffs((int)DA9062AA_VLDO4_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_VLDO4_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -988,6 +1141,15 @@ static int da9062_regulator_probe(struct platform_device *pdev)
return PTR_ERR(regl->suspend_sleep);
}
+ if (regl->info->vsel_gpi.reg) {
+ regl->vsel_gpi = devm_regmap_field_alloc(
+ &pdev->dev,
+ chip->regmap,
+ regl->info->vsel_gpi);
+ if (IS_ERR(regl->vsel_gpi))
+ return PTR_ERR(regl->vsel_gpi);
+ }
+
/* Register regulator */
memset(&config, 0, sizeof(config));
config.dev = chip->dev;
@@ -997,6 +1159,8 @@ static int da9062_regulator_probe(struct platform_device *pdev)
regl->rdev = devm_regulator_register(&pdev->dev, ®l->desc,
&config);
if (IS_ERR(regl->rdev)) {
+ if (PTR_ERR(regl->rdev) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
dev_err(&pdev->dev,
"Failed to register %s regulator\n",
regl->desc.name);
--
2.20.1
next prev parent reply other threads:[~2019-11-27 13:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-27 13:59 [PATCH v2 0/5] DA9062 PMIC features Marco Felsch
2019-11-27 13:59 ` [PATCH v2 1/5] gpio: add support to get local gpio number Marco Felsch
2019-11-28 10:46 ` Bartosz Golaszewski
2019-11-28 12:49 ` Marco Felsch
2019-11-29 7:45 ` Uwe Kleine-König
2019-11-29 7:50 ` Marco Felsch
2019-11-29 9:32 ` Linus Walleij
2019-11-29 10:15 ` Marco Felsch
2019-11-29 10:19 ` Linus Walleij
2019-11-29 11:36 ` Marco Felsch
2019-11-29 12:46 ` Linus Walleij
2019-11-27 13:59 ` [PATCH v2 2/5] dt-bindings: mfd: da9062: add regulator voltage selection documentation Marco Felsch
2019-11-27 13:59 ` Marco Felsch [this message]
2019-11-29 8:29 ` [PATCH v2 3/5] regulator: da9062: add voltage selection gpio support Linus Walleij
2019-11-27 13:59 ` [PATCH v2 4/5] dt-bindings: mfd: da9062: add regulator gpio enable/disable documentation Marco Felsch
2019-11-29 8:33 ` Linus Walleij
2019-11-27 13:59 ` [PATCH v2 5/5] regulator: da9062: add gpio based regulator dis-/enable support Marco Felsch
2019-11-29 8:25 ` Linus Walleij
2019-11-29 9:11 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191127135932.7223-4-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=Adam.Thomson.Opensource@diasemi.com \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=stwiss.opensource@diasemi.com \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).