From: Marco Felsch <m.felsch@pengutronix.de>
To: bgolaszewski@baylibre.com, linus.walleij@linaro.org,
support.opensource@diasemi.com, lee.jones@linaro.org,
robh+dt@kernel.org, lgirdwood@gmail.com, broonie@kernel.org,
stwiss.opensource@diasemi.com,
Adam.Thomson.Opensource@diasemi.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@pengutronix.de
Subject: [PATCH v2 5/5] regulator: da9062: add gpio based regulator dis-/enable support
Date: Wed, 27 Nov 2019 14:59:32 +0100 [thread overview]
Message-ID: <20191127135932.7223-6-m.felsch@pengutronix.de> (raw)
In-Reply-To: <20191127135932.7223-1-m.felsch@pengutronix.de>
Each regulator can be enabeld/disabled by the internal pmic state
machine or by a gpio input signal. Typically the OTP configures the
regulators to be enabled/disabled on a specific sequence number which is
most the time fine. Sometimes we need to reconfigure that due to a PCB
bug. This patch adds the support to disable/enable the regulator based
on a gpio input signal.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
drivers/regulator/da9062-regulator.c | 84 +++++++++++++++++++++++++++-
1 file changed, 82 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
index f545ae39352e..484b5c9a1d7e 100644
--- a/drivers/regulator/da9062-regulator.c
+++ b/drivers/regulator/da9062-regulator.c
@@ -52,6 +52,7 @@ struct da9062_regulator_info {
struct reg_field suspend_sleep;
unsigned int suspend_vsel_reg;
struct reg_field vsel_gpi;
+ struct reg_field ena_gpi;
/* Event detection bit */
struct reg_field oc_event;
};
@@ -68,6 +69,7 @@ struct da9062_regulator {
struct regmap_field *sleep;
struct regmap_field *suspend_sleep;
struct regmap_field *vsel_gpi;
+ struct regmap_field *ena_gpi;
};
/* Encapsulates all information for the regulators driver */
@@ -413,7 +415,10 @@ static int da9062_config_gpi(struct device_node *np,
goto free;
}
- ret = regmap_field_write(regl->vsel_gpi, nr);
+ if (!strncmp(gpi_id, "ena", 3))
+ ret = regmap_field_write(regl->ena_gpi, nr);
+ else
+ ret = regmap_field_write(regl->vsel_gpi, nr);
free:
kfree(prop);
@@ -426,7 +431,13 @@ static int da9062_parse_dt(struct device_node *np,
const struct regulator_desc *desc,
struct regulator_config *cfg)
{
- return da9062_config_gpi(np, desc, cfg, "vsel");
+ int error;
+
+ error = da9062_config_gpi(np, desc, cfg, "vsel");
+ if (error)
+ return error;
+
+ return da9062_config_gpi(np, desc, cfg, "ena");
}
/* DA9061 Regulator information */
@@ -471,6 +482,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK1_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VBUCK1_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_BUCK1_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK1_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_BUCK1_GPI_MASK) - 1),
},
{
.desc.id = DA9061_ID_BUCK2,
@@ -512,6 +527,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK3_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VBUCK3_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_BUCK3_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK3_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_BUCK3_GPI_MASK) - 1),
},
{
.desc.id = DA9061_ID_BUCK3,
@@ -553,6 +572,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK4_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VBUCK4_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_BUCK4_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK4_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_BUCK4_GPI_MASK) - 1),
},
{
.desc.id = DA9061_ID_LDO1,
@@ -587,6 +610,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VLDO1_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VLDO1_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_LDO1_CONT,
+ __builtin_ffs((int)DA9062AA_LDO1_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_LDO1_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -625,6 +652,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VLDO2_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VLDO2_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_LDO2_CONT,
+ __builtin_ffs((int)DA9062AA_LDO2_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_LDO2_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -663,6 +694,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VLDO3_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VLDO3_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_LDO3_CONT,
+ __builtin_ffs((int)DA9062AA_LDO3_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_LDO3_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -701,6 +736,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VLDO4_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VLDO4_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_LDO4_CONT,
+ __builtin_ffs((int)DA9062AA_LDO4_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_LDO4_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -750,6 +789,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK1_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VBUCK1_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_BUCK1_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK1_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_BUCK1_GPI_MASK) - 1),
},
{
.desc.id = DA9062_ID_BUCK2,
@@ -791,6 +834,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK2_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VBUCK2_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_BUCK2_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK2_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_BUCK2_GPI_MASK) - 1),
},
{
.desc.id = DA9062_ID_BUCK3,
@@ -832,6 +879,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK3_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VBUCK3_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_BUCK3_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK3_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_BUCK3_GPI_MASK) - 1),
},
{
.desc.id = DA9062_ID_BUCK4,
@@ -873,6 +924,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK4_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VBUCK4_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_BUCK4_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK4_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_BUCK4_GPI_MASK) - 1),
},
{
.desc.id = DA9062_ID_LDO1,
@@ -907,6 +962,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VLDO1_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VLDO1_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_LDO1_CONT,
+ __builtin_ffs((int)DA9062AA_LDO1_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_LDO1_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -945,6 +1004,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VLDO2_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VLDO2_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_LDO2_CONT,
+ __builtin_ffs((int)DA9062AA_LDO2_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_LDO2_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -983,6 +1046,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VLDO3_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VLDO3_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_LDO3_CONT,
+ __builtin_ffs((int)DA9062AA_LDO3_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_LDO3_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -1021,6 +1088,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VLDO4_GPI_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz(DA9062AA_VLDO4_GPI_MASK) - 1),
+ .ena_gpi = REG_FIELD(DA9062AA_LDO4_CONT,
+ __builtin_ffs((int)DA9062AA_LDO4_GPI_MASK) - 1,
+ sizeof(unsigned int) * 8 -
+ __builtin_clz(DA9062AA_LDO4_GPI_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -1150,6 +1221,15 @@ static int da9062_regulator_probe(struct platform_device *pdev)
return PTR_ERR(regl->vsel_gpi);
}
+ if (regl->info->ena_gpi.reg) {
+ regl->ena_gpi = devm_regmap_field_alloc(
+ &pdev->dev,
+ chip->regmap,
+ regl->info->ena_gpi);
+ if (IS_ERR(regl->ena_gpi))
+ return PTR_ERR(regl->ena_gpi);
+ }
+
/* Register regulator */
memset(&config, 0, sizeof(config));
config.dev = chip->dev;
--
2.20.1
next prev parent reply other threads:[~2019-11-27 13:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-27 13:59 [PATCH v2 0/5] DA9062 PMIC features Marco Felsch
2019-11-27 13:59 ` [PATCH v2 1/5] gpio: add support to get local gpio number Marco Felsch
2019-11-28 10:46 ` Bartosz Golaszewski
2019-11-28 12:49 ` Marco Felsch
2019-11-29 7:45 ` Uwe Kleine-König
2019-11-29 7:50 ` Marco Felsch
2019-11-29 9:32 ` Linus Walleij
2019-11-29 10:15 ` Marco Felsch
2019-11-29 10:19 ` Linus Walleij
2019-11-29 11:36 ` Marco Felsch
2019-11-29 12:46 ` Linus Walleij
2019-11-27 13:59 ` [PATCH v2 2/5] dt-bindings: mfd: da9062: add regulator voltage selection documentation Marco Felsch
2019-11-27 13:59 ` [PATCH v2 3/5] regulator: da9062: add voltage selection gpio support Marco Felsch
2019-11-29 8:29 ` Linus Walleij
2019-11-27 13:59 ` [PATCH v2 4/5] dt-bindings: mfd: da9062: add regulator gpio enable/disable documentation Marco Felsch
2019-11-29 8:33 ` Linus Walleij
2019-11-27 13:59 ` Marco Felsch [this message]
2019-11-29 8:25 ` [PATCH v2 5/5] regulator: da9062: add gpio based regulator dis-/enable support Linus Walleij
2019-11-29 9:11 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191127135932.7223-6-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=Adam.Thomson.Opensource@diasemi.com \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=stwiss.opensource@diasemi.com \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).