linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Peter Xu <peterx@redhat.com>
Cc: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
	Paolo Bonzini <pbonzini@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>
Subject: Re: [PATCH RFC 04/15] KVM: Implement ring-based dirty memory tracking
Date: Mon, 2 Dec 2019 12:10:36 -0800	[thread overview]
Message-ID: <20191202201036.GJ4063@linux.intel.com> (raw)
In-Reply-To: <20191129213505.18472-5-peterx@redhat.com>

On Fri, Nov 29, 2019 at 04:34:54PM -0500, Peter Xu wrote:
> This patch is heavily based on previous work from Lei Cao
> <lei.cao@stratus.com> and Paolo Bonzini <pbonzini@redhat.com>. [1]
> 
> KVM currently uses large bitmaps to track dirty memory.  These bitmaps
> are copied to userspace when userspace queries KVM for its dirty page
> information.  The use of bitmaps is mostly sufficient for live
> migration, as large parts of memory are be dirtied from one log-dirty
> pass to another.  However, in a checkpointing system, the number of
> dirty pages is small and in fact it is often bounded---the VM is
> paused when it has dirtied a pre-defined number of pages. Traversing a
> large, sparsely populated bitmap to find set bits is time-consuming,
> as is copying the bitmap to user-space.
> 
> A similar issue will be there for live migration when the guest memory
> is huge while the page dirty procedure is trivial.  In that case for
> each dirty sync we need to pull the whole dirty bitmap to userspace
> and analyse every bit even if it's mostly zeros.
> 
> The preferred data structure for above scenarios is a dense list of
> guest frame numbers (GFN).  This patch series stores the dirty list in
> kernel memory that can be memory mapped into userspace to allow speedy
> harvesting.
> 
> We defined two new data structures:
> 
>   struct kvm_dirty_ring;
>   struct kvm_dirty_ring_indexes;
> 
> Firstly, kvm_dirty_ring is defined to represent a ring of dirty
> pages.  When dirty tracking is enabled, we can push dirty gfn onto the
> ring.
> 
> Secondly, kvm_dirty_ring_indexes is defined to represent the
> user/kernel interface of each ring.  Currently it contains two
> indexes: (1) avail_index represents where we should push our next
> PFN (written by kernel), while (2) fetch_index represents where the
> userspace should fetch the next dirty PFN (written by userspace).
> 
> One complete ring is composed by one kvm_dirty_ring plus its
> corresponding kvm_dirty_ring_indexes.
> 
> Currently, we have N+1 rings for each VM of N vcpus:
> 
>   - for each vcpu, we have 1 per-vcpu dirty ring,
>   - for each vm, we have 1 per-vm dirty ring

Why?  I assume the purpose of per-vcpu rings is to avoid contention between
threads, but the motiviation needs to be explicitly stated.  And why is a
per-vm fallback ring needed?

If my assumption is correct, have other approaches been tried/profiled?
E.g. using cmpxchg to reserve N number of entries in a shared ring.  IMO,
adding kvm_get_running_vcpu() is a hack that is just asking for future
abuse and the vcpu/vm/as_id interactions in mark_page_dirty_in_ring()
look extremely fragile.  I also dislike having two different mechanisms
for accessing the ring (lock for per-vm, something else for per-vcpu).

> Please refer to the documentation update in this patch for more
> details.
> 
> Note that this patch implements the core logic of dirty ring buffer.
> It's still disabled for all archs for now.  Also, we'll address some
> of the other issues in follow up patches before it's firstly enabled
> on x86.
> 
> [1] https://patchwork.kernel.org/patch/10471409/
> 
> Signed-off-by: Lei Cao <lei.cao@stratus.com>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> Signed-off-by: Peter Xu <peterx@redhat.com>
> ---

...

> diff --git a/virt/kvm/dirty_ring.c b/virt/kvm/dirty_ring.c
> new file mode 100644
> index 000000000000..9264891f3c32
> --- /dev/null
> +++ b/virt/kvm/dirty_ring.c
> @@ -0,0 +1,156 @@
> +#include <linux/kvm_host.h>
> +#include <linux/kvm.h>
> +#include <linux/vmalloc.h>
> +#include <linux/kvm_dirty_ring.h>
> +
> +u32 kvm_dirty_ring_get_rsvd_entries(void)
> +{
> +	return KVM_DIRTY_RING_RSVD_ENTRIES + kvm_cpu_dirty_log_size();
> +}
> +
> +int kvm_dirty_ring_alloc(struct kvm *kvm, struct kvm_dirty_ring *ring)
> +{
> +	u32 size = kvm->dirty_ring_size;

Just pass in @size, that way you don't need @kvm.  And the callers will be
less ugly, e.g. the initial allocation won't need to speculatively set
kvm->dirty_ring_size.

> +
> +	ring->dirty_gfns = vmalloc(size);
> +	if (!ring->dirty_gfns)
> +		return -ENOMEM;
> +	memset(ring->dirty_gfns, 0, size);
> +
> +	ring->size = size / sizeof(struct kvm_dirty_gfn);
> +	ring->soft_limit =
> +	    (kvm->dirty_ring_size / sizeof(struct kvm_dirty_gfn)) -

And passing @size avoids issues like this where a local var is ignored.

> +	    kvm_dirty_ring_get_rsvd_entries();
> +	ring->dirty_index = 0;
> +	ring->reset_index = 0;
> +	spin_lock_init(&ring->lock);
> +
> +	return 0;
> +}
> +

...

> +void kvm_dirty_ring_free(struct kvm_dirty_ring *ring)
> +{
> +	if (ring->dirty_gfns) {

Why condition freeing the dirty ring on kvm->dirty_ring_size, this
obviously protects itself.  Not to mention vfree() also plays nice with a
NULL input.

> +		vfree(ring->dirty_gfns);
> +		ring->dirty_gfns = NULL;
> +	}
> +}
> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
> index 681452d288cd..8642c977629b 100644
> --- a/virt/kvm/kvm_main.c
> +++ b/virt/kvm/kvm_main.c
> @@ -64,6 +64,8 @@
>  #define CREATE_TRACE_POINTS
>  #include <trace/events/kvm.h>
>  
> +#include <linux/kvm_dirty_ring.h>
> +
>  /* Worst case buffer size needed for holding an integer. */
>  #define ITOA_MAX_LEN 12
>  
> @@ -149,6 +151,10 @@ static void mark_page_dirty_in_slot(struct kvm *kvm,
>  				    struct kvm_vcpu *vcpu,
>  				    struct kvm_memory_slot *memslot,
>  				    gfn_t gfn);
> +static void mark_page_dirty_in_ring(struct kvm *kvm,
> +				    struct kvm_vcpu *vcpu,
> +				    struct kvm_memory_slot *slot,
> +				    gfn_t gfn);
>  
>  __visible bool kvm_rebooting;
>  EXPORT_SYMBOL_GPL(kvm_rebooting);
> @@ -359,11 +365,22 @@ int kvm_vcpu_init(struct kvm_vcpu *vcpu, struct kvm *kvm, unsigned id)
>  	vcpu->preempted = false;
>  	vcpu->ready = false;
>  
> +	if (kvm->dirty_ring_size) {
> +		r = kvm_dirty_ring_alloc(vcpu->kvm, &vcpu->dirty_ring);
> +		if (r) {
> +			kvm->dirty_ring_size = 0;
> +			goto fail_free_run;

This looks wrong, kvm->dirty_ring_size is used to free allocations, i.e.
previous allocations will leak if a vcpu allocation fails.

> +		}
> +	}
> +
>  	r = kvm_arch_vcpu_init(vcpu);
>  	if (r < 0)
> -		goto fail_free_run;
> +		goto fail_free_ring;
>  	return 0;
>  
> +fail_free_ring:
> +	if (kvm->dirty_ring_size)
> +		kvm_dirty_ring_free(&vcpu->dirty_ring);
>  fail_free_run:
>  	free_page((unsigned long)vcpu->run);
>  fail:
> @@ -381,6 +398,8 @@ void kvm_vcpu_uninit(struct kvm_vcpu *vcpu)
>  	put_pid(rcu_dereference_protected(vcpu->pid, 1));
>  	kvm_arch_vcpu_uninit(vcpu);
>  	free_page((unsigned long)vcpu->run);
> +	if (vcpu->kvm->dirty_ring_size)
> +		kvm_dirty_ring_free(&vcpu->dirty_ring);
>  }
>  EXPORT_SYMBOL_GPL(kvm_vcpu_uninit);
>  
> @@ -690,6 +709,7 @@ static struct kvm *kvm_create_vm(unsigned long type)
>  	struct kvm *kvm = kvm_arch_alloc_vm();
>  	int r = -ENOMEM;
>  	int i;
> +	struct page *page;
>  
>  	if (!kvm)
>  		return ERR_PTR(-ENOMEM);
> @@ -705,6 +725,14 @@ static struct kvm *kvm_create_vm(unsigned long type)
>  
>  	BUILD_BUG_ON(KVM_MEM_SLOTS_NUM > SHRT_MAX);
>  
> +	page = alloc_page(GFP_KERNEL | __GFP_ZERO);
> +	if (!page) {
> +		r = -ENOMEM;
> +		goto out_err_alloc_page;
> +	}
> +	kvm->vm_run = page_address(page);
> +	BUILD_BUG_ON(sizeof(struct kvm_vm_run) > PAGE_SIZE);
> +
>  	if (init_srcu_struct(&kvm->srcu))
>  		goto out_err_no_srcu;
>  	if (init_srcu_struct(&kvm->irq_srcu))
> @@ -775,6 +803,9 @@ static struct kvm *kvm_create_vm(unsigned long type)
>  out_err_no_irq_srcu:
>  	cleanup_srcu_struct(&kvm->srcu);
>  out_err_no_srcu:
> +	free_page((unsigned long)page);
> +	kvm->vm_run = NULL;

No need to nullify vm_run.

> +out_err_alloc_page:
>  	kvm_arch_free_vm(kvm);
>  	mmdrop(current->mm);
>  	return ERR_PTR(r);
> @@ -800,6 +831,15 @@ static void kvm_destroy_vm(struct kvm *kvm)
>  	int i;
>  	struct mm_struct *mm = kvm->mm;
>  
> +	if (kvm->dirty_ring_size) {
> +		kvm_dirty_ring_free(&kvm->vm_dirty_ring);
> +	}

Unnecessary parantheses.

> +
> +	if (kvm->vm_run) {
> +		free_page((unsigned long)kvm->vm_run);
> +		kvm->vm_run = NULL;
> +	}
> +
>  	kvm_uevent_notify_change(KVM_EVENT_DESTROY_VM, kvm);
>  	kvm_destroy_vm_debugfs(kvm);
>  	kvm_arch_sync_events(kvm);
> @@ -2301,7 +2341,7 @@ static void mark_page_dirty_in_slot(struct kvm *kvm,
>  {
>  	if (memslot && memslot->dirty_bitmap) {
>  		unsigned long rel_gfn = gfn - memslot->base_gfn;
> -
> +		mark_page_dirty_in_ring(kvm, vcpu, memslot, gfn);
>  		set_bit_le(rel_gfn, memslot->dirty_bitmap);
>  	}
>  }
> @@ -2649,6 +2689,13 @@ void kvm_vcpu_on_spin(struct kvm_vcpu *me, bool yield_to_kernel_mode)
>  }
>  EXPORT_SYMBOL_GPL(kvm_vcpu_on_spin);

  reply	other threads:[~2019-12-02 20:10 UTC|newest]

Thread overview: 121+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-29 21:34 [PATCH RFC 00/15] KVM: Dirty ring interface Peter Xu
2019-11-29 21:34 ` [PATCH RFC 01/15] KVM: Move running VCPU from ARM to common code Peter Xu
2019-12-03 19:01   ` Sean Christopherson
2019-12-04  9:42     ` Paolo Bonzini
2019-12-09 22:05       ` Peter Xu
2019-11-29 21:34 ` [PATCH RFC 02/15] KVM: Add kvm/vcpu argument to mark_dirty_page_in_slot Peter Xu
2019-12-02 19:32   ` Sean Christopherson
2019-12-02 20:49     ` Peter Xu
2019-11-29 21:34 ` [PATCH RFC 03/15] KVM: Add build-time error check on kvm_run size Peter Xu
2019-12-02 19:30   ` Sean Christopherson
2019-12-02 20:53     ` Peter Xu
2019-12-02 22:19       ` Sean Christopherson
2019-12-02 22:40         ` Peter Xu
2019-12-03  5:50           ` Sean Christopherson
2019-12-03 13:41         ` Paolo Bonzini
2019-12-03 17:04           ` Peter Xu
2019-11-29 21:34 ` [PATCH RFC 04/15] KVM: Implement ring-based dirty memory tracking Peter Xu
2019-12-02 20:10   ` Sean Christopherson [this message]
2019-12-02 21:16     ` Peter Xu
2019-12-02 21:50       ` Sean Christopherson
2019-12-02 23:09         ` Peter Xu
2019-12-03 13:48         ` Paolo Bonzini
2019-12-03 18:46           ` Sean Christopherson
2019-12-04 10:05             ` Paolo Bonzini
2019-12-07  0:29               ` Sean Christopherson
2019-12-09  9:37                 ` Paolo Bonzini
2019-12-09 21:54               ` Peter Xu
2019-12-10 10:07                 ` Paolo Bonzini
2019-12-10 15:52                   ` Peter Xu
2019-12-10 17:09                     ` Paolo Bonzini
2019-12-15 17:21                       ` Peter Xu
2019-12-16 10:08                         ` Paolo Bonzini
2019-12-16 18:54                           ` Peter Xu
2019-12-17  9:01                             ` Paolo Bonzini
2019-12-17 16:24                               ` Peter Xu
2019-12-17 16:28                                 ` Paolo Bonzini
2019-12-18 21:58                                   ` Peter Xu
2019-12-18 22:24                                     ` Sean Christopherson
2019-12-18 22:37                                       ` Paolo Bonzini
2019-12-18 22:49                                         ` Peter Xu
2019-12-17  2:28                           ` Tian, Kevin
2019-12-17 16:18                             ` Alex Williamson
2019-12-17 16:30                               ` Paolo Bonzini
2019-12-18  0:29                                 ` Tian, Kevin
     [not found]                           ` <AADFC41AFE54684AB9EE6CBC0274A5D19D645E5F@SHSMSX104.ccr.corp.intel.com>
2019-12-17  5:17                             ` Tian, Kevin
2019-12-17  5:25                               ` Yan Zhao
2019-12-17 16:24                                 ` Alex Williamson
2019-12-03 19:13   ` Sean Christopherson
2019-12-04 10:14     ` Paolo Bonzini
2019-12-04 14:33       ` Sean Christopherson
2019-12-04 10:38   ` Jason Wang
2019-12-04 11:04     ` Paolo Bonzini
2019-12-04 19:52       ` Peter Xu
2019-12-05  6:51         ` Jason Wang
2019-12-05 12:08           ` Peter Xu
2019-12-05 13:12             ` Jason Wang
2019-12-10 13:25       ` Michael S. Tsirkin
2019-12-10 13:31         ` Paolo Bonzini
2019-12-10 16:02           ` Peter Xu
2019-12-10 21:53             ` Michael S. Tsirkin
2019-12-11  9:05               ` Paolo Bonzini
2019-12-11 13:04                 ` Michael S. Tsirkin
2019-12-11 14:54                   ` Peter Xu
2019-12-10 21:48           ` Michael S. Tsirkin
2019-12-11 12:53   ` Michael S. Tsirkin
2019-12-11 14:14     ` Paolo Bonzini
2019-12-11 20:59     ` Peter Xu
2019-12-11 22:57       ` Michael S. Tsirkin
2019-12-12  0:08         ` Paolo Bonzini
2019-12-12  7:36           ` Michael S. Tsirkin
2019-12-12  8:12             ` Paolo Bonzini
2019-12-12 10:38               ` Michael S. Tsirkin
2019-12-15 17:33           ` Peter Xu
2019-12-16  9:47             ` Michael S. Tsirkin
2019-12-16 15:07               ` Peter Xu
2019-12-16 15:33                 ` Michael S. Tsirkin
2019-12-16 15:47                   ` Peter Xu
2019-12-11 17:24   ` Christophe de Dinechin
2019-12-13 20:23     ` Peter Xu
2019-12-14  7:57       ` Paolo Bonzini
2019-12-14 16:26         ` Peter Xu
2019-12-16  9:29           ` Paolo Bonzini
2019-12-16 15:26             ` Peter Xu
2019-12-16 15:31               ` Paolo Bonzini
2019-12-16 15:43                 ` Peter Xu
2019-12-17 12:16         ` Christophe de Dinechin
2019-12-17 12:19           ` Paolo Bonzini
2019-12-17 15:38             ` Peter Xu
2019-12-17 16:31               ` Paolo Bonzini
2019-12-17 16:42                 ` Peter Xu
2019-12-17 16:48                   ` Paolo Bonzini
2019-12-17 19:41                     ` Peter Xu
2019-12-18  0:33                       ` Paolo Bonzini
2019-12-18 16:32                         ` Peter Xu
2019-12-18 16:41                           ` Paolo Bonzini
2019-12-20 18:19       ` Peter Xu
2019-11-29 21:34 ` [PATCH RFC 05/15] KVM: Make dirty ring exclusive to dirty bitmap log Peter Xu
2019-11-29 21:34 ` [PATCH RFC 06/15] KVM: Introduce dirty ring wait queue Peter Xu
2019-11-29 21:34 ` [PATCH RFC 07/15] KVM: X86: Implement ring-based dirty memory tracking Peter Xu
2019-11-29 21:34 ` [PATCH RFC 08/15] KVM: selftests: Always clear dirty bitmap after iteration Peter Xu
2019-11-29 21:34 ` [PATCH RFC 09/15] KVM: selftests: Sync uapi/linux/kvm.h to tools/ Peter Xu
2019-11-29 21:35 ` [PATCH RFC 10/15] KVM: selftests: Use a single binary for dirty/clear log test Peter Xu
2019-11-29 21:35 ` [PATCH RFC 11/15] KVM: selftests: Introduce after_vcpu_run hook for dirty " Peter Xu
2019-11-29 21:35 ` [PATCH RFC 12/15] KVM: selftests: Add dirty ring buffer test Peter Xu
2019-11-29 21:35 ` [PATCH RFC 13/15] KVM: selftests: Let dirty_log_test async for dirty ring test Peter Xu
2019-11-29 21:35 ` [PATCH RFC 14/15] KVM: selftests: Add "-c" parameter to dirty log test Peter Xu
2019-11-29 21:35 ` [PATCH RFC 15/15] KVM: selftests: Test dirty ring waitqueue Peter Xu
2019-11-30  8:29 ` [PATCH RFC 00/15] KVM: Dirty ring interface Paolo Bonzini
2019-12-02  2:13   ` Peter Xu
2019-12-03 13:59     ` Paolo Bonzini
2019-12-05 19:30       ` Peter Xu
2019-12-05 19:59         ` Paolo Bonzini
2019-12-05 20:52           ` Peter Xu
2019-12-02 20:21   ` Sean Christopherson
2019-12-02 20:43     ` Peter Xu
2019-12-04 10:39 ` Jason Wang
2019-12-04 19:33   ` Peter Xu
2019-12-05  6:49     ` Jason Wang
2019-12-11 13:41 ` Christophe de Dinechin
2019-12-11 14:16   ` Paolo Bonzini
2019-12-11 17:15     ` Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191202201036.GJ4063@linux.intel.com \
    --to=sean.j.christopherson@intel.com \
    --cc=dgilbert@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=peterx@redhat.com \
    --cc=vkuznets@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).