From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linus.walleij@linaro.org, linux-arm-msm@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
swboyd@chromium.org, dianders@chromium.org
Subject: Re: [PATCH v2 2/2] pinctrl: qcom: sc7180: Add new qup functions
Date: Tue, 10 Dec 2019 22:38:29 -0800 [thread overview]
Message-ID: <20191211063829.GC3143381@builder> (raw)
In-Reply-To: <0101016ef36a9118-f2919277-effa-4cd5-adf8-bbc8016f31df-000000@us-west-2.amazonses.com>
On Tue 10 Dec 21:24 PST 2019, Rajendra Nayak wrote:
> on sc7180 we have cases where multiple functions from the same
> qup instance share the same pin. This is true for qup02/04/11 and qup13.
> Add new function names to distinguish which qup function to use.
>
> The device tree files for this platform haven't landed in mainline yet,
> so there aren't any users upstream who should break with this change
> in function names, however, anyone using the devicetree files that were
> posted on the lists and using these specific function names will need
> to update their changes.
I don't think this paragraph adds value to the git log, but the patch
looks good.
>
> Reported-by: Stephen Boyd <swboyd@chromium.org>
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> drivers/pinctrl/qcom/pinctrl-sc7180.c | 60 +++++++++++++++++++++++------------
> 1 file changed, 40 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-sc7180.c b/drivers/pinctrl/qcom/pinctrl-sc7180.c
> index d6cfad7..6247d92 100644
> --- a/drivers/pinctrl/qcom/pinctrl-sc7180.c
> +++ b/drivers/pinctrl/qcom/pinctrl-sc7180.c
> @@ -456,14 +456,18 @@ enum sc7180_functions {
> msm_mux_qspi_data,
> msm_mux_qup00,
> msm_mux_qup01,
> - msm_mux_qup02,
> + msm_mux_qup02_i2c,
> + msm_mux_qup02_uart,
> msm_mux_qup03,
> - msm_mux_qup04,
> + msm_mux_qup04_i2c,
> + msm_mux_qup04_uart,
> msm_mux_qup05,
> msm_mux_qup10,
> - msm_mux_qup11,
> + msm_mux_qup11_i2c,
> + msm_mux_qup11_uart,
> msm_mux_qup12,
> - msm_mux_qup13,
> + msm_mux_qup13_i2c,
> + msm_mux_qup13_uart,
> msm_mux_qup14,
> msm_mux_qup15,
> msm_mux_sdc1_tb,
> @@ -543,7 +547,10 @@ static const char * const sdc1_tb_groups[] = {
> static const char * const sdc2_tb_groups[] = {
> "gpio5",
> };
> -static const char * const qup11_groups[] = {
> +static const char * const qup11_i2c_groups[] = {
> + "gpio6", "gpio7",
> +};
> +static const char * const qup11_uart_groups[] = {
> "gpio6", "gpio7",
> };
> static const char * const ddr_bist_groups[] = {
> @@ -593,7 +600,10 @@ static const char * const qdss_groups[] = {
> static const char * const pll_reset_groups[] = {
> "gpio14",
> };
> -static const char * const qup02_groups[] = {
> +static const char * const qup02_i2c_groups[] = {
> + "gpio15", "gpio16",
> +};
> +static const char * const qup02_uart_groups[] = {
> "gpio15", "gpio16",
> };
> static const char * const cci_i2c_groups[] = {
> @@ -698,7 +708,10 @@ static const char * const wlan1_adc1_groups[] = {
> static const char * const atest_usb13_groups[] = {
> "gpio44",
> };
> -static const char * const qup13_groups[] = {
> +static const char * const qup13_i2c_groups[] = {
> + "gpio46", "gpio47",
> +};
> +static const char * const qup13_uart_groups[] = {
> "gpio46", "gpio47",
> };
> static const char * const gcc_gp1_groups[] = {
> @@ -848,7 +861,10 @@ static const char * const usb_phy_groups[] = {
> static const char * const mss_lte_groups[] = {
> "gpio108", "gpio109",
> };
> -static const char * const qup04_groups[] = {
> +static const char * const qup04_i2c_groups[] = {
> + "gpio115", "gpio116",
> +};
> +static const char * const qup04_uart_groups[] = {
> "gpio115", "gpio116",
> };
>
> @@ -929,14 +945,18 @@ static const struct msm_function sc7180_functions[] = {
> FUNCTION(qspi_data),
> FUNCTION(qup00),
> FUNCTION(qup01),
> - FUNCTION(qup02),
> + FUNCTION(qup02_i2c),
> + FUNCTION(qup02_uart),
> FUNCTION(qup03),
> - FUNCTION(qup04),
> + FUNCTION(qup04_i2c),
> + FUNCTION(qup04_uart),
> FUNCTION(qup05),
> FUNCTION(qup10),
> - FUNCTION(qup11),
> + FUNCTION(qup11_i2c),
> + FUNCTION(qup11_uart),
> FUNCTION(qup12),
> - FUNCTION(qup13),
> + FUNCTION(qup13_i2c),
> + FUNCTION(qup13_uart),
> FUNCTION(qup14),
> FUNCTION(qup15),
> FUNCTION(sdc1_tb),
> @@ -976,8 +996,8 @@ static const struct msm_pingroup sc7180_groups[] = {
> [3] = PINGROUP(3, SOUTH, qup01, sp_cmu, dbg_out, qdss_cti, _, _, _, _, _),
> [4] = PINGROUP(4, NORTH, sdc1_tb, _, qdss_cti, _, _, _, _, _, _),
> [5] = PINGROUP(5, NORTH, sdc2_tb, _, _, _, _, _, _, _, _),
> - [6] = PINGROUP(6, NORTH, qup11, qup11, _, _, _, _, _, _, _),
> - [7] = PINGROUP(7, NORTH, qup11, qup11, ddr_bist, _, _, _, _, _, _),
> + [6] = PINGROUP(6, NORTH, qup11_i2c, qup11_uart, _, _, _, _, _, _, _),
> + [7] = PINGROUP(7, NORTH, qup11_i2c, qup11_uart, ddr_bist, _, _, _, _, _, _),
> [8] = PINGROUP(8, NORTH, gp_pdm1, ddr_bist, _, phase_flag, qdss_cti, _, _, _, _),
> [9] = PINGROUP(9, NORTH, ddr_bist, _, phase_flag, qdss_cti, _, _, _, _, _),
> [10] = PINGROUP(10, NORTH, mdp_vsync, ddr_bist, _, _, _, _, _, _, _),
> @@ -985,8 +1005,8 @@ static const struct msm_pingroup sc7180_groups[] = {
> [12] = PINGROUP(12, SOUTH, mdp_vsync, m_voc, qup01, _, phase_flag, wlan2_adc0, atest_usb10, ddr_pxi3, _),
> [13] = PINGROUP(13, SOUTH, cam_mclk, pll_bypassnl, qdss, _, _, _, _, _, _),
> [14] = PINGROUP(14, SOUTH, cam_mclk, pll_reset, qdss, _, _, _, _, _, _),
> - [15] = PINGROUP(15, SOUTH, cam_mclk, qup02, qup02, qdss, _, _, _, _, _),
> - [16] = PINGROUP(16, SOUTH, cam_mclk, qup02, qup02, qdss, _, _, _, _, _),
> + [15] = PINGROUP(15, SOUTH, cam_mclk, qup02_i2c, qup02_uart, qdss, _, _, _, _, _),
> + [16] = PINGROUP(16, SOUTH, cam_mclk, qup02_i2c, qup02_uart, qdss, _, _, _, _, _),
> [17] = PINGROUP(17, SOUTH, cci_i2c, _, phase_flag, qdss, _, wlan1_adc0, atest_usb12, ddr_pxi1, atest_char),
> [18] = PINGROUP(18, SOUTH, cci_i2c, agera_pll, _, phase_flag, qdss, vsense_trigger, ddr_pxi0, atest_char3, _),
> [19] = PINGROUP(19, SOUTH, cci_i2c, _, phase_flag, qdss, atest_char2, _, _, _, _),
> @@ -1016,8 +1036,8 @@ static const struct msm_pingroup sc7180_groups[] = {
> [43] = PINGROUP(43, NORTH, qup12, _, _, _, _, _, _, _, _),
> [44] = PINGROUP(44, NORTH, qup12, _, phase_flag, qdss_cti, wlan1_adc1, atest_usb13, ddr_pxi1, _, _),
> [45] = PINGROUP(45, NORTH, qup12, qdss_cti, _, _, _, _, _, _, _),
> - [46] = PINGROUP(46, NORTH, qup13, qup13, _, _, _, _, _, _, _),
> - [47] = PINGROUP(47, NORTH, qup13, qup13, _, _, _, _, _, _, _),
> + [46] = PINGROUP(46, NORTH, qup13_i2c, qup13_uart, _, _, _, _, _, _, _),
> + [47] = PINGROUP(47, NORTH, qup13_i2c, qup13_uart, _, _, _, _, _, _, _),
> [48] = PINGROUP(48, NORTH, gcc_gp1, _, _, _, _, _, _, _, _),
> [49] = PINGROUP(49, WEST, mi2s_1, btfm_slimbus, _, _, _, _, _, _, _),
> [50] = PINGROUP(50, WEST, mi2s_1, btfm_slimbus, gp_pdm1, _, _, _, _, _, _),
> @@ -1085,8 +1105,8 @@ static const struct msm_pingroup sc7180_groups[] = {
> [112] = PINGROUP(112, NORTH, _, _, _, _, _, _, _, _, _),
> [113] = PINGROUP(113, NORTH, _, _, _, _, _, _, _, _, _),
> [114] = PINGROUP(114, NORTH, _, _, _, _, _, _, _, _, _),
> - [115] = PINGROUP(115, WEST, qup04, qup04, _, _, _, _, _, _, _),
> - [116] = PINGROUP(116, WEST, qup04, qup04, _, _, _, _, _, _, _),
> + [115] = PINGROUP(115, WEST, qup04_i2c, qup04_uart, _, _, _, _, _, _, _),
> + [116] = PINGROUP(116, WEST, qup04_i2c, qup04_uart, _, _, _, _, _, _, _),
> [117] = PINGROUP(117, WEST, dp_hot, _, _, _, _, _, _, _, _),
> [118] = PINGROUP(118, WEST, _, _, _, _, _, _, _, _, _),
> [119] = UFS_RESET(ufs_reset, 0x7f000),
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
next prev parent reply other threads:[~2019-12-11 6:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1576041834-23084-1-git-send-email-rnayak@codeaurora.org>
2019-12-11 5:24 ` [PATCH v2 2/2] pinctrl: qcom: sc7180: Add new qup functions Rajendra Nayak
[not found] ` <0101016ef36a9118-f2919277-effa-4cd5-adf8-bbc8016f31df-000000@us-west-2.amazonses.com>
2019-12-11 6:38 ` Bjorn Andersson [this message]
2019-12-11 7:07 ` Rajendra Nayak
[not found] ` <0101016ef3c8e061-462507db-9d6f-4ead-8740-73b08ed97574-000000@us-west-2.amazonses.com>
2019-12-11 18:04 ` Doug Anderson
2019-12-16 8:40 ` Linus Walleij
[not found] ` <0101016ef36a90e5-678f09f2-8fcd-4fe9-8e1f-3f1622ad0c5e-000000@us-west-2.amazonses.com>
2019-12-11 17:00 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211063829.GC3143381@builder \
--to=bjorn.andersson@linaro.org \
--cc=dianders@chromium.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rnayak@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).