[PATCH AUTOSEL 4.4 01/37] scsi: mpt3sas: Fix clear pending bit in ioctl status

[PATCH AUTOSEL 4.4 01/37] scsi: mpt3sas: Fix clear pending bit in ioctl status

[Sasha Levin]

From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>

[ Upstream commit 782b281883caf70289ba6a186af29441a117d23e ]

When user issues diag register command from application with required size,
and if driver unable to allocate the memory, then it will fail the register
command. While failing the register command, driver is not currently
clearing MPT3_CMD_PENDING bit in ctl_cmds.status variable which was set
before trying to allocate the memory. As this bit is set, subsequent
register command will be failed with BUSY status even when user wants to
register the trace buffer will less memory.

Clear MPT3_CMD_PENDING bit in ctl_cmds.status before returning the diag
register command with no memory status.

Link: https://lore.kernel.org/r/1568379890-18347-4-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_ctl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 4ccde5a05b701..7874b989d2f4b 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -1456,7 +1456,8 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
 			    " for diag buffers, requested size(%d)\n",
 			    ioc->name, __func__, request_data_sz);
 			mpt3sas_base_free_smid(ioc, smid);
-			return -ENOMEM;
+			rc = -ENOMEM;
+			goto out;
 		}
 		ioc->diag_buffer[buffer_type] = request_data;
 		ioc->diag_buffer_sz[buffer_type] = request_data_sz;
-- 
2.20.1

[PATCH AUTOSEL 4.4 02/37] scsi: lpfc: Fix locking on mailbox command completion

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 07b8582430370097238b589f4e24da7613ca6dd3 ]

Symptoms were seen of the driver not having valid data for mailbox
commands. After debugging, the following sequence was found:

The driver maintains a port-wide pointer of the mailbox command that is
currently in execution. Once finished, the port-wide pointer is cleared
(done in lpfc_sli4_mq_release()). The next mailbox command issued will set
the next pointer and so on.

The mailbox response data is only copied if there is a valid port-wide
pointer.

In the failing case, it was seen that a new mailbox command was being
attempted in parallel with the completion.  The parallel path was seeing
the mailbox no long in use (flag check under lock) and thus set the port
pointer.  The completion path had cleared the active flag under lock, but
had not touched the port pointer.  The port pointer is cleared after the
lock is released. In this case, the completion path cleared the just-set
value by the parallel path.

Fix by making the calls that clear mbox state/port pointer while under
lock.  Also slightly cleaned up the error path.

Link: https://lore.kernel.org/r/20190922035906.10977-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_sli.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 523a1058078a5..9b8867c023b93 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -11759,13 +11759,19 @@ send_current_mbox:
 	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 	/* Setting active mailbox pointer need to be in sync to flag clear */
 	phba->sli.mbox_active = NULL;
+	if (bf_get(lpfc_trailer_consumed, mcqe))
+		lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 	/* Wake up worker thread to post the next pending mailbox command */
 	lpfc_worker_wake_up(phba);
+	return workposted;
+
 out_no_mqe_complete:
+	spin_lock_irqsave(&phba->hbalock, iflags);
 	if (bf_get(lpfc_trailer_consumed, mcqe))
 		lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
-	return workposted;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return false;
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.4 03/37] Input: atmel_mxt_ts - disable IRQ across suspend

[Sasha Levin]

From: Evan Green <evgreen@chromium.org>

[ Upstream commit 463fa44eec2fef50d111ed0199cf593235065c04 ]

Across suspend and resume, we are seeing error messages like the following:

atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121)
atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121)

This occurs because the driver leaves its IRQ enabled. Upon resume, there
is an IRQ pending, but the interrupt is serviced before both the driver and
the underlying I2C bus have been resumed. This causes EREMOTEIO errors.

Disable the IRQ in suspend, and re-enable it on resume. If there are cases
where the driver enters suspend with interrupts disabled, that's a bug we
should fix separately.

Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index be2f2521c1c50..d955841da57d6 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2701,6 +2701,8 @@ static int __maybe_unused mxt_suspend(struct device *dev)
 
 	mutex_unlock(&input_dev->mutex);
 
+	disable_irq(data->irq);
+
 	return 0;
 }
 
@@ -2713,6 +2715,8 @@ static int __maybe_unused mxt_resume(struct device *dev)
 	if (!input_dev)
 		return 0;
 
+	enable_irq(data->irq);
+
 	mutex_lock(&input_dev->mutex);
 
 	if (input_dev->users)
-- 
2.20.1

[PATCH AUTOSEL 4.4 04/37] iommu/tegra-smmu: Fix page tables in > 4 GiB memory

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 96d3ab802e4930a29a33934373157d6dff1b2c7e ]

Page tables that reside in physical memory beyond the 4 GiB boundary are
currently not working properly. The reason is that when the physical
address for page directory entries is read, it gets truncated at 32 bits
and can cause crashes when passing that address to the DMA API.

Fix this by first casting the PDE value to a dma_addr_t and then using
the page frame number mask for the SMMU instance to mask out the invalid
bits, which are typically used for mapping attributes, etc.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/tegra-smmu.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index c4eb293b15242..04cec050e42bf 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -153,9 +153,9 @@ static bool smmu_dma_addr_valid(struct tegra_smmu *smmu, dma_addr_t addr)
 	return (addr & smmu->pfn_mask) == addr;
 }
 
-static dma_addr_t smmu_pde_to_dma(u32 pde)
+static dma_addr_t smmu_pde_to_dma(struct tegra_smmu *smmu, u32 pde)
 {
-	return pde << 12;
+	return (dma_addr_t)(pde & smmu->pfn_mask) << 12;
 }
 
 static void smmu_flush_ptc_all(struct tegra_smmu *smmu)
@@ -540,6 +540,7 @@ static u32 *tegra_smmu_pte_lookup(struct tegra_smmu_as *as, unsigned long iova,
 				  dma_addr_t *dmap)
 {
 	unsigned int pd_index = iova_pd_index(iova);
+	struct tegra_smmu *smmu = as->smmu;
 	struct page *pt_page;
 	u32 *pd;
 
@@ -548,7 +549,7 @@ static u32 *tegra_smmu_pte_lookup(struct tegra_smmu_as *as, unsigned long iova,
 		return NULL;
 
 	pd = page_address(as->pd);
-	*dmap = smmu_pde_to_dma(pd[pd_index]);
+	*dmap = smmu_pde_to_dma(smmu, pd[pd_index]);
 
 	return tegra_smmu_pte_offset(pt_page, iova);
 }
@@ -590,7 +591,7 @@ static u32 *as_get_pte(struct tegra_smmu_as *as, dma_addr_t iova,
 	} else {
 		u32 *pd = page_address(as->pd);
 
-		*dmap = smmu_pde_to_dma(pd[pde]);
+		*dmap = smmu_pde_to_dma(smmu, pd[pde]);
 	}
 
 	return tegra_smmu_pte_offset(as->pts[pde], iova);
@@ -615,7 +616,7 @@ static void tegra_smmu_pte_put_use(struct tegra_smmu_as *as, unsigned long iova)
 	if (--as->count[pde] == 0) {
 		struct tegra_smmu *smmu = as->smmu;
 		u32 *pd = page_address(as->pd);
-		dma_addr_t pte_dma = smmu_pde_to_dma(pd[pde]);
+		dma_addr_t pte_dma = smmu_pde_to_dma(smmu, pd[pde]);
 
 		tegra_smmu_set_pde(as, iova, 0);
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 05/37] scsi: target: compare full CHAP_A Algorithm strings

[Sasha Levin]

From: David Disseldorp <ddiss@suse.de>

[ Upstream commit 9cef2a7955f2754257a7cddedec16edae7b587d0 ]

RFC 2307 states:

  For CHAP [RFC1994], in the first step, the initiator MUST send:

      CHAP_A=<A1,A2...>

   Where A1,A2... are proposed algorithms, in order of preference.
...
   For the Algorithm, as stated in [RFC1994], one value is required to
   be implemented:

       5     (CHAP with MD5)

LIO currently checks for this value by only comparing a single byte in
the tokenized Algorithm string, which means that any value starting with
a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by
comparing the entire tokenized string.

Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target_auth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/iscsi/iscsi_target_auth.c b/drivers/target/iscsi/iscsi_target_auth.c
index 3184e023a0529..1dd6028eccb99 100644
--- a/drivers/target/iscsi/iscsi_target_auth.c
+++ b/drivers/target/iscsi/iscsi_target_auth.c
@@ -74,7 +74,7 @@ static int chap_check_algorithm(const char *a_str)
 		if (!token)
 			goto out;
 
-		if (!strncmp(token, "5", 1)) {
+		if (!strcmp(token, "5")) {
 			pr_debug("Selected MD5 Algorithm\n");
 			kfree(orig);
 			return CHAP_DIGEST_MD5;
-- 
2.20.1

[PATCH AUTOSEL 4.4 06/37] scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit feff8b3d84d3d9570f893b4d83e5eab6693d6a52 ]

When operating in private loop mode, PLOGI exchanges are racing and the
driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating
the login with the other end causing the other end to abort its PLOGI as
well. Discovery never fully completes.

Fix by disabling the PLOGI abort when private loop and letting the state
machine play out.

Link: https://lore.kernel.org/r/20191018211832.7917-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_nportdisc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 3a4613f9fb9fc..6aa0698925dac 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -454,8 +454,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	 * single discovery thread, this will cause a huge delay in
 	 * discovery. Also this will cause multiple state machines
 	 * running in parallel for this node.
+	 * This only applies to a fabric environment.
 	 */
-	if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) {
+	if ((ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) &&
+	    (vport->fc_flag & FC_FABRIC)) {
 		/* software abort outstanding PLOGI */
 		lpfc_els_abort(phba, ndlp);
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.4 07/37] scsi: csiostor: Don't enable IRQs too early

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d6c9b31ac3064fbedf8961f120a4c117daa59932 ]

These are called with IRQs disabled from csio_mgmt_tmo_handler() so we
can't call spin_unlock_irq() or it will enable IRQs prematurely.

Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://lore.kernel.org/r/20191019085913.GA14245@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/csiostor/csio_lnode.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c
index be5ee2d378155..957767d383610 100644
--- a/drivers/scsi/csiostor/csio_lnode.c
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -301,6 +301,7 @@ csio_ln_fdmi_rhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	struct fc_fdmi_port_name *port_name;
 	uint8_t buf[64];
 	uint8_t *fc4_type;
+	unsigned long flags;
 
 	if (fdmi_req->wr_status != FW_SUCCESS) {
 		csio_ln_dbg(ln, "WR error:%x in processing fdmi rhba cmd\n",
@@ -377,13 +378,13 @@ csio_ln_fdmi_rhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	len = (uint32_t)(pld - (uint8_t *)cmd);
 
 	/* Submit FDMI RPA request */
-	spin_lock_irq(&hw->lock);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_done,
 				FCOE_CT, &fdmi_req->dma_buf, len)) {
 		CSIO_INC_STATS(ln, n_fdmi_err);
 		csio_ln_dbg(ln, "Failed to issue fdmi rpa req\n");
 	}
-	spin_unlock_irq(&hw->lock);
+	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 /*
@@ -404,6 +405,7 @@ csio_ln_fdmi_dprt_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	struct fc_fdmi_rpl *reg_pl;
 	struct fs_fdmi_attrs *attrib_blk;
 	uint8_t buf[64];
+	unsigned long flags;
 
 	if (fdmi_req->wr_status != FW_SUCCESS) {
 		csio_ln_dbg(ln, "WR error:%x in processing fdmi dprt cmd\n",
@@ -483,13 +485,13 @@ csio_ln_fdmi_dprt_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	attrib_blk->numattrs = htonl(numattrs);
 
 	/* Submit FDMI RHBA request */
-	spin_lock_irq(&hw->lock);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_rhba_cbfn,
 				FCOE_CT, &fdmi_req->dma_buf, len)) {
 		CSIO_INC_STATS(ln, n_fdmi_err);
 		csio_ln_dbg(ln, "Failed to issue fdmi rhba req\n");
 	}
-	spin_unlock_irq(&hw->lock);
+	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 /*
@@ -504,6 +506,7 @@ csio_ln_fdmi_dhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	void *cmd;
 	struct fc_fdmi_port_name *port_name;
 	uint32_t len;
+	unsigned long flags;
 
 	if (fdmi_req->wr_status != FW_SUCCESS) {
 		csio_ln_dbg(ln, "WR error:%x in processing fdmi dhba cmd\n",
@@ -534,13 +537,13 @@ csio_ln_fdmi_dhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	len += sizeof(*port_name);
 
 	/* Submit FDMI request */
-	spin_lock_irq(&hw->lock);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_dprt_cbfn,
 				FCOE_CT, &fdmi_req->dma_buf, len)) {
 		CSIO_INC_STATS(ln, n_fdmi_err);
 		csio_ln_dbg(ln, "Failed to issue fdmi dprt req\n");
 	}
-	spin_unlock_irq(&hw->lock);
+	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.4 08/37] powerpc/pseries: Mark accumulate_stolen_time() as notrace

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit eb8e20f89093b64f48975c74ccb114e6775cee22 ]

accumulate_stolen_time() is called prior to interrupt state being
reconciled, which can trip the warning in arch_local_irq_restore():

  WARNING: CPU: 5 PID: 1017 at arch/powerpc/kernel/irq.c:258 .arch_local_irq_restore+0x9c/0x130
  ...
  NIP .arch_local_irq_restore+0x9c/0x130
  LR  .rb_start_commit+0x38/0x80
  Call Trace:
    .ring_buffer_lock_reserve+0xe4/0x620
    .trace_function+0x44/0x210
    .function_trace_call+0x148/0x170
    .ftrace_ops_no_ops+0x180/0x1d0
    ftrace_call+0x4/0x8
    .accumulate_stolen_time+0x1c/0xb0
    decrementer_common+0x124/0x160

For now just mark it as notrace. We may change the ordering to call it
after interrupt state has been reconciled, but that is a larger
change.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024055932.27940-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 9baba9576e998..2bcd0cfb82e0b 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -245,7 +245,7 @@ static u64 scan_dispatch_log(u64 stop_tb)
  * Accumulate stolen time by scanning the dispatch trace log.
  * Called on entry from user mode.
  */
-void accumulate_stolen_time(void)
+void notrace accumulate_stolen_time(void)
 {
 	u64 sst, ust;
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 09/37] dma-debug: add a schedule point in debug_dma_dump_mappings()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 9ff6aa027dbb98755f0265695354f2dd07c0d1ce ]

debug_dma_dump_mappings() can take a lot of cpu cycles :

lpk43:/# time wc -l /sys/kernel/debug/dma-api/dump
163435 /sys/kernel/debug/dma-api/dump

real	0m0.463s
user	0m0.003s
sys	0m0.459s

Let's add a cond_resched() to avoid holding cpu for too long.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/dma-debug.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 51a76af25c663..173013f5e41b9 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -427,6 +427,7 @@ void debug_dma_dump_mappings(struct device *dev)
 		}
 
 		spin_unlock_irqrestore(&bucket->lock, flags);
+		cond_resched();
 	}
 }
 EXPORT_SYMBOL(debug_dma_dump_mappings);
-- 
2.20.1

[PATCH AUTOSEL 4.4 10/37] clocksource/drivers/asm9260: Add a check for of_clk_get

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 6e001f6a4cc73cd06fc7b8c633bc4906c33dd8ad ]

asm9260_timer_init misses a check for of_clk_get.
Add a check for it and print errors like other clocksource drivers.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016124330.22211-1-hslester96@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/asm9260_timer.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clocksource/asm9260_timer.c b/drivers/clocksource/asm9260_timer.c
index 217438d39eb36..38a28240f84fa 100644
--- a/drivers/clocksource/asm9260_timer.c
+++ b/drivers/clocksource/asm9260_timer.c
@@ -196,6 +196,10 @@ static void __init asm9260_timer_init(struct device_node *np)
 		panic("%s: unable to map resource", np->name);
 
 	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get clk!\n");
+		return PTR_ERR(clk);
+	}
 
 	ret = clk_prepare_enable(clk);
 	if (ret)
-- 
2.20.1

[PATCH AUTOSEL 4.4 11/37] powerpc/security/book3s64: Report L1TF status in sysfs

[Sasha Levin]

From: Anthony Steinhauser <asteinhauser@google.com>

[ Upstream commit 8e6b6da91ac9b9ec5a925b6cb13f287a54bd547d ]

Some PowerPC CPUs are vulnerable to L1TF to the same extent as to
Meltdown. It is also mitigated by flushing the L1D on privilege
transition.

Currently the sysfs gives a false negative on L1TF on CPUs that I
verified to be vulnerable, a Power9 Talos II Boston 004e 1202, PowerNV
T2P9D01.

Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[mpe: Just have cpu_show_l1tf() call cpu_show_meltdown() directly]
Link: https://lore.kernel.org/r/20191029190759.84821-1-asteinhauser@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/security.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c
index 156cfe6d23b09..fc5c49046aa7d 100644
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -161,6 +161,11 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha
 
 	return sprintf(buf, "Vulnerable\n");
 }
+
+ssize_t cpu_show_l1tf(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return cpu_show_meltdown(dev, attr, buf);
+}
 #endif
 
 ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf)
-- 
2.20.1

[PATCH AUTOSEL 4.4 12/37] jbd2: Fix statistics for the number of logged blocks

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 015c6033068208d6227612c878877919f3fcf6b6 ]

jbd2 statistics counting number of blocks logged in a transaction was
wrong. It didn't count the commit block and more importantly it didn't
count revoke descriptor blocks. Make sure these get properly counted.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-13-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/commit.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 2d964ce456060..ebbd7d054cabd 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -740,7 +740,6 @@ start_journal_io:
 				submit_bh(WRITE_SYNC, bh);
 			}
 			cond_resched();
-			stats.run.rs_blocks_logged += bufs;
 
 			/* Force a new descriptor to be generated next
                            time round the loop. */
@@ -827,6 +826,7 @@ start_journal_io:
 		if (unlikely(!buffer_uptodate(bh)))
 			err = -EIO;
 		jbd2_unfile_log_bh(bh);
+		stats.run.rs_blocks_logged++;
 
 		/*
 		 * The list contains temporary buffer heads created by
@@ -872,6 +872,7 @@ start_journal_io:
 		BUFFER_TRACE(bh, "ph5: control buffer writeout done: unfile");
 		clear_buffer_jwrite(bh);
 		jbd2_unfile_log_bh(bh);
+		stats.run.rs_blocks_logged++;
 		__brelse(bh);		/* One for getblk */
 		/* AKPM: bforget here */
 	}
@@ -893,6 +894,7 @@ start_journal_io:
 	}
 	if (cbh)
 		err = journal_wait_on_commit_record(journal, cbh);
+	stats.run.rs_blocks_logged++;
 	if (jbd2_has_feature_async_commit(journal) &&
 	    journal->j_flags & JBD2_BARRIER) {
 		blkdev_issue_flush(journal->j_dev, GFP_NOFS, NULL);
-- 
2.20.1

[PATCH AUTOSEL 4.4 13/37] scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6)

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit f6b8540f40201bff91062dd64db8e29e4ddaaa9d ]

According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical
blocks must be transferred. Make the SCSI tracing code follow SBC-2.

Fixes: bf8162354233 ("[SCSI] add scsi trace core functions and put trace points")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20191105215553.185018-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_trace.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c
index 08bb47b53bc3e..551fd0329bca8 100644
--- a/drivers/scsi/scsi_trace.c
+++ b/drivers/scsi/scsi_trace.c
@@ -29,15 +29,18 @@ static const char *
 scsi_trace_rw6(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	sector_t lba = 0, txlen = 0;
+	u32 lba = 0, txlen;
 
 	lba |= ((cdb[1] & 0x1F) << 16);
 	lba |=  (cdb[2] << 8);
 	lba |=   cdb[3];
-	txlen = cdb[4];
+	/*
+	 * From SBC-2: a TRANSFER LENGTH field set to zero specifies that 256
+	 * logical blocks shall be read (READ(6)) or written (WRITE(6)).
+	 */
+	txlen = cdb[4] ? cdb[4] : 256;
 
-	trace_seq_printf(p, "lba=%llu txlen=%llu",
-			 (unsigned long long)lba, (unsigned long long)txlen);
+	trace_seq_printf(p, "lba=%u txlen=%u", lba, txlen);
 	trace_seq_putc(p, 0);
 
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 4.4 14/37] scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 7cfd5639d99bec0d27af089d0c8c114330e43a72 ]

If the driver receives a login that is later then LOGO'd by the remote port
(aka ndlp), the driver, upon the completion of the LOGO ACC transmission,
will logout the node and unregister the rpi that is being used for the
node.  As part of the unreg, the node's rpi value is replaced by the
LPFC_RPI_ALLOC_ERROR value.  If the port is subsequently offlined, the
offline walks the nodes and ensures they are logged out, which possibly
entails unreg'ing their rpi values.  This path does not validate the node's
rpi value, thus doesn't detect that it has been unreg'd already.  The
replaced rpi value is then used when accessing the rpi bitmask array which
tracks active rpi values.  As the LPFC_RPI_ALLOC_ERROR value is not a valid
index for the bitmask, it may fault the system.

Revise the rpi release code to detect when the rpi value is the replaced
RPI_ALLOC_ERROR value and ignore further release steps.

Link: https://lore.kernel.org/r/20191105005708.7399-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_sli.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 9b8867c023b93..065fdc17bbfbb 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -15792,6 +15792,13 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba)
 static void
 __lpfc_sli4_free_rpi(struct lpfc_hba *phba, int rpi)
 {
+	/*
+	 * if the rpi value indicates a prior unreg has already
+	 * been done, skip the unreg.
+	 */
+	if (rpi == LPFC_RPI_ALLOC_ERROR)
+		return;
+
 	if (test_and_clear_bit(rpi, phba->sli4_hba.rpi_bmask)) {
 		phba->sli4_hba.rpi_count--;
 		phba->sli4_hba.max_cfg_param.rpi_used--;
-- 
2.20.1

[PATCH AUTOSEL 4.4 15/37] clk: qcom: Allow constant ratio freq tables for rcg

[Sasha Levin]

From: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>

[ Upstream commit efd164b5520afd6fb2883b68e0d408a7de29c491 ]

Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just
some constant ratio from the input across the entire frequency range.  It
would be great if we could specify the frequency table as a single entry
constant ratio instead of a long list, ie:

	{ .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 },
        { }

So, lets support that.

We need to fix a corner case in qcom_find_freq() where if the freq table
is non-null, but has no frequencies, we end up returning an "entry" before
the table array, which is bad.  Then, we need ignore the freq from the
table, and instead base everything on the requested freq.

Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/clk-rcg2.c | 2 ++
 drivers/clk/qcom/common.c   | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index b544bb302f798..350a01f748706 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -196,6 +196,8 @@ static int _freq_tbl_determine_rate(struct clk_hw *hw,
 	p = clk_hw_get_parent_by_index(hw, index);
 	if (clk_flags & CLK_SET_RATE_PARENT) {
 		if (f->pre_div) {
+			if (!rate)
+				rate = req->rate;
 			rate /= 2;
 			rate *= f->pre_div + 1;
 		}
diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
index 8fa477293ae0a..d2f26577f5c0e 100644
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
@@ -36,6 +36,9 @@ struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, unsigned long rate)
 	if (!f)
 		return NULL;
 
+	if (!f->freq)
+		return f;
+
 	for (; f->freq; f++)
 		if (rate <= f->freq)
 			return f;
-- 
2.20.1

[PATCH AUTOSEL 4.4 16/37] irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 27eebb60357ed5aa6659442f92907c0f7368d6ae ]

If the 'brcm,irq-can-wake' property is specified, make sure we also
enable the corresponding parent interrupt we are attached to.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191024201415.23454-4-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-bcm7038-l1.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index 6fb34bf0f3527..34e13623f29d7 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -283,6 +283,10 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
 		pr_err("failed to map parent interrupt %d\n", parent_irq);
 		return -EINVAL;
 	}
+
+	if (of_property_read_bool(dn, "brcm,irq-can-wake"))
+		enable_irq_wake(parent_irq);
+
 	irq_set_chained_handler_and_data(parent_irq, bcm7038_l1_irq_handle,
 					 intc);
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 17/37] irqchip: ingenic: Error out if IRQ domain creation failed

[Sasha Levin]

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit 52ecc87642f273a599c9913b29fd179c13de457b ]

If we cannot create the IRQ domain, the driver should fail to probe
instead of succeeding with just a warning message.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1570015525-27018-3-git-send-email-zhouyanjie@zoho.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-ingenic.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/irqchip/irq-ingenic.c b/drivers/irqchip/irq-ingenic.c
index fc5953dea509a..b2e16dca76a60 100644
--- a/drivers/irqchip/irq-ingenic.c
+++ b/drivers/irqchip/irq-ingenic.c
@@ -117,6 +117,14 @@ static int __init ingenic_intc_of_init(struct device_node *node,
 		goto out_unmap_irq;
 	}
 
+	domain = irq_domain_add_legacy(node, num_chips * 32,
+				       JZ4740_IRQ_BASE, 0,
+				       &irq_domain_simple_ops, NULL);
+	if (!domain) {
+		err = -ENOMEM;
+		goto out_unmap_base;
+	}
+
 	for (i = 0; i < num_chips; i++) {
 		/* Mask all irqs */
 		writel(0xffffffff, intc->base + (i * CHIP_SIZE) +
@@ -143,14 +151,11 @@ static int __init ingenic_intc_of_init(struct device_node *node,
 				       IRQ_NOPROBE | IRQ_LEVEL);
 	}
 
-	domain = irq_domain_add_legacy(node, num_chips * 32, JZ4740_IRQ_BASE, 0,
-				       &irq_domain_simple_ops, NULL);
-	if (!domain)
-		pr_warn("unable to register IRQ domain\n");
-
 	setup_irq(parent_irq, &intc_cascade_action);
 	return 0;
 
+out_unmap_base:
+	iounmap(intc->base);
 out_unmap_irq:
 	irq_dispose_mapping(parent_irq);
 out_free:
-- 
2.20.1

[PATCH AUTOSEL 4.4 18/37] mfd: mfd-core: Honour Device Tree's request to disable a child-device

[Sasha Levin]

From: Lee Jones <lee.jones@linaro.org>

[ Upstream commit 6b5c350648b857047b47acf74a57087ad27d6183 ]

Until now, MFD has assumed all child devices passed to it (via
mfd_cells) are to be registered. It does not take into account
requests from Device Tree and the like to disable child devices
on a per-platform basis.

Well now it does.

Link: https://www.spinics.net/lists/arm-kernel/msg366309.html
Link: https://lkml.org/lkml/2019/8/22/1350

Reported-by: Barry Song <Baohua.Song@csr.com>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/mfd-core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 215bb5eeb5acf..85f4e55823717 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -177,6 +177,11 @@ static int mfd_add_device(struct device *parent, int id,
 	if (parent->of_node && cell->of_compatible) {
 		for_each_child_of_node(parent->of_node, np) {
 			if (of_device_is_compatible(np, cell->of_compatible)) {
+				if (!of_device_is_available(np)) {
+					/* Ignore disabled devices error free */
+					ret = 0;
+					goto fail_alias;
+				}
 				pdev->dev.of_node = np;
 				pdev->dev.fwnode = &np->fwnode;
 				break;
-- 
2.20.1

[PATCH AUTOSEL 4.4 19/37] fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long

[Sasha Levin]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit 6fcbcec9cfc7b3c6a2c1f1a23ebacedff7073e0a ]

Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu
fractions as signed 64-bit int, filters negative values and then reports
lower half as signed 32-bit int.

Result may looks like:

fs.quota.allocated_dquots = 22327
fs.quota.cache_hits = -489852115
fs.quota.drops = -487288718
fs.quota.free_dquots = 22083
fs.quota.lookups = -486883485
fs.quota.reads = 22327
fs.quota.syncs = 335064
fs.quota.writes = 3088689

Values bigger than 2^31-1 reported as negative.

All counters except "allocated_dquots" and "free_dquots" are monotonic,
thus they should be reported as is without filtering negative values.

Kernel doesn't have generic helper for 64-bit sysctl yet,
let's use at least unsigned long.

Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c      | 29 +++++++++++++++++------------
 include/linux/quota.h |  2 +-
 2 files changed, 18 insertions(+), 13 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 1cb1d02c59373..875e45f37a8a2 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -2782,68 +2782,73 @@ EXPORT_SYMBOL(dquot_quotactl_sysfile_ops);
 static int do_proc_dqstats(struct ctl_table *table, int write,
 		     void __user *buffer, size_t *lenp, loff_t *ppos)
 {
-	unsigned int type = (int *)table->data - dqstats.stat;
+	unsigned int type = (unsigned long *)table->data - dqstats.stat;
+	s64 value = percpu_counter_sum(&dqstats.counter[type]);
+
+	/* Filter negative values for non-monotonic counters */
+	if (value < 0 && (type == DQST_ALLOC_DQUOTS ||
+			  type == DQST_FREE_DQUOTS))
+		value = 0;
 
 	/* Update global table */
-	dqstats.stat[type] =
-			percpu_counter_sum_positive(&dqstats.counter[type]);
-	return proc_dointvec(table, write, buffer, lenp, ppos);
+	dqstats.stat[type] = value;
+	return proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
 }
 
 static struct ctl_table fs_dqstats_table[] = {
 	{
 		.procname	= "lookups",
 		.data		= &dqstats.stat[DQST_LOOKUPS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "drops",
 		.data		= &dqstats.stat[DQST_DROPS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "reads",
 		.data		= &dqstats.stat[DQST_READS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "writes",
 		.data		= &dqstats.stat[DQST_WRITES],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "cache_hits",
 		.data		= &dqstats.stat[DQST_CACHE_HITS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "allocated_dquots",
 		.data		= &dqstats.stat[DQST_ALLOC_DQUOTS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "free_dquots",
 		.data		= &dqstats.stat[DQST_FREE_DQUOTS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "syncs",
 		.data		= &dqstats.stat[DQST_SYNCS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
diff --git a/include/linux/quota.h b/include/linux/quota.h
index b2505acfd3c07..b34412df1542c 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -253,7 +253,7 @@ enum {
 };
 
 struct dqstats {
-	int stat[_DQST_DQSTAT_LAST];
+	unsigned long stat[_DQST_DQSTAT_LAST];
 	struct percpu_counter counter[_DQST_DQSTAT_LAST];
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 20/37] scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 6c6d59e0fe5b86cf273d6d744a6a9768c4ecc756 ]

Coverity reported the following:

*** CID 101747:  Null pointer dereferences  (FORWARD_NULL)
/drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp()
4433     			kfree(mp);
4434     		}
4435     		mempool_free(mbox, phba->mbox_mem_pool);
4436     	}
4437     out:
4438     	if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
vvv     CID 101747:  Null pointer dereferences  (FORWARD_NULL)
vvv     Dereferencing null pointer "shost".
4439     		spin_lock_irq(shost->host_lock);
4440     		ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
4441     		spin_unlock_irq(shost->host_lock);
4442
4443     		/* If the node is not being used by another discovery thread,
4444     		 * and we are sending a reject, we are done with it.

Fix by adding a check for non-null shost in line 4438.
The scenario when shost is set to null is when ndlp is null.
As such, the ndlp check present was sufficient. But better safe
than sorry so add the shost check.

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 101747 ("Null pointer dereferences")
Fixes: 2e0fef85e098 ("[SCSI] lpfc: NPIV: split ports")

CC: James Bottomley <James.Bottomley@SteelEye.com>
CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
CC: linux-next@vger.kernel.org
Link: https://lore.kernel.org/r/20191111230401.12958-3-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_els.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 7ca8c2522c928..530b7df21322a 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -3839,7 +3839,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		mempool_free(mbox, phba->mbox_mem_pool);
 	}
 out:
-	if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
+	if (ndlp && NLP_CHK_NODE_ACT(ndlp) && shost) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
 		spin_unlock_irq(shost->host_lock);
-- 
2.20.1

[PATCH AUTOSEL 4.4 21/37] scsi: ufs: fix potential bug which ends in system hang

[Sasha Levin]

From: Bean Huo <beanhuo@micron.com>

[ Upstream commit cfcbae3895b86c390ede57b2a8f601dd5972b47b ]

In function __ufshcd_query_descriptor(), in the event of an error
happening, we directly goto out_unlock and forget to invaliate
hba->dev_cmd.query.descriptor pointer. This results in this pointer still
valid in ufshcd_copy_query_response() for other query requests which go
through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and
system hangs. Log as shown below:

Unable to handle kernel paging request at virtual address
ffff000012233c40
Mem abort info:
   ESR = 0x96000047
   Exception class = DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
Data abort info:
   ISV = 0, ISS = 0x00000047
   CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c
[ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003,
pmd=00000000ba8b8003, pte=0000000000000000
 Internal error: Oops: 96000047 [#2] PREEMPT SMP
 ...
 Call trace:
  __memcpy+0x74/0x180
  ufshcd_issue_devman_upiu_cmd+0x250/0x3c0
  ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8
  ufs_bsg_request+0x178/0x3b0
  bsg_queue_rq+0xc0/0x118
  blk_mq_dispatch_rq_list+0xb0/0x538
  blk_mq_sched_dispatch_requests+0x18c/0x1d8
  __blk_mq_run_hw_queue+0xb4/0x118
  blk_mq_run_work_fn+0x28/0x38
  process_one_work+0x1ec/0x470
  worker_thread+0x48/0x458
  kthread+0x130/0x138
  ret_from_fork+0x10/0x1c
 Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7)
 ---[ end trace 793e1eb5dff69f2d ]---
 note: kworker/0:2H[2054] exited with preempt_count 1

This patch is to move "descriptor = NULL" down to below the label
"out_unlock".

Fixes: d44a5f98bb49b2(ufs: query descriptor API)
Link: https://lore.kernel.org/r/20191112223436.27449-3-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 504d367961528..fcf5141bf950f 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1809,10 +1809,10 @@ static int ufshcd_query_descriptor(struct ufs_hba *hba,
 		goto out_unlock;
 	}
 
-	hba->dev_cmd.query.descriptor = NULL;
 	*buf_len = be16_to_cpu(response->upiu_res.length);
 
 out_unlock:
+	hba->dev_cmd.query.descriptor = NULL;
 	mutex_unlock(&hba->dev_cmd.lock);
 out:
 	ufshcd_release(hba);
-- 
2.20.1

[PATCH AUTOSEL 4.4 22/37] powerpc/pseries/cmm: Implement release() function for sysfs device

[Sasha Levin]

From: David Hildenbrand <david@redhat.com>

[ Upstream commit 7d8212747435c534c8d564fbef4541a463c976ff ]

When unloading the module, one gets
  ------------[ cut here ]------------
  Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.
  WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0
  ...

We only have one static fake device. There is nothing to do when
releasing the device (via cmm_exit()).

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-2-david@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/cmm.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index fc44ad0475f84..b126ce49ae7bb 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -391,6 +391,10 @@ static struct bus_type cmm_subsys = {
 	.dev_name = "cmm",
 };
 
+static void cmm_release_device(struct device *dev)
+{
+}
+
 /**
  * cmm_sysfs_register - Register with sysfs
  *
@@ -406,6 +410,7 @@ static int cmm_sysfs_register(struct device *dev)
 
 	dev->id = 0;
 	dev->bus = &cmm_subsys;
+	dev->release = cmm_release_device;
 
 	if ((rc = device_register(dev)))
 		goto subsys_unregister;
-- 
2.20.1

[PATCH AUTOSEL 4.4 23/37] powerpc/security: Fix wrong message when RFI Flush is disable

[Sasha Levin]

From: "Gustavo L. F. Walbon" <gwalbon@linux.ibm.com>

[ Upstream commit 4e706af3cd8e1d0503c25332b30cad33c97ed442 ]

The issue was showing "Mitigation" message via sysfs whatever the
state of "RFI Flush", but it should show "Vulnerable" when it is
disabled.

If you have "L1D private" feature enabled and not "RFI Flush" you are
vulnerable to meltdown attacks.

"RFI Flush" is the key feature to mitigate the meltdown whatever the
"L1D private" state.

SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only.

So the message should be as the truth table shows:

  CPU | L1D private | RFI Flush |                sysfs
  ----|-------------|-----------|-------------------------------------
   P9 |    False    |   False   | Vulnerable
   P9 |    False    |   True    | Mitigation: RFI Flush
   P9 |    True     |   False   | Vulnerable: L1D private per thread
   P9 |    True     |   True    | Mitigation: RFI Flush, L1D private per thread
   P8 |    False    |   False   | Vulnerable
   P8 |    False    |   True    | Mitigation: RFI Flush

Output before this fix:
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: RFI Flush, L1D private per thread
  # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: L1D private per thread

Output after fix:
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: RFI Flush, L1D private per thread
  # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Vulnerable: L1D private per thread

Signed-off-by: Gustavo L. F. Walbon <gwalbon@linux.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/security.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c
index fc5c49046aa7d..45778c83038f8 100644
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -135,26 +135,22 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha
 
 	thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV);
 
-	if (rfi_flush || thread_priv) {
+	if (rfi_flush) {
 		struct seq_buf s;
 		seq_buf_init(&s, buf, PAGE_SIZE - 1);
 
-		seq_buf_printf(&s, "Mitigation: ");
-
-		if (rfi_flush)
-			seq_buf_printf(&s, "RFI Flush");
-
-		if (rfi_flush && thread_priv)
-			seq_buf_printf(&s, ", ");
-
+		seq_buf_printf(&s, "Mitigation: RFI Flush");
 		if (thread_priv)
-			seq_buf_printf(&s, "L1D private per thread");
+			seq_buf_printf(&s, ", L1D private per thread");
 
 		seq_buf_printf(&s, "\n");
 
 		return s.len;
 	}
 
+	if (thread_priv)
+		return sprintf(buf, "Vulnerable: L1D private per thread\n");
+
 	if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
 	    !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
 		return sprintf(buf, "Not affected\n");
-- 
2.20.1

[PATCH AUTOSEL 4.4 24/37] clk: pxa: fix one of the pxa RTC clocks

[Sasha Levin]

From: Robert Jarzmik <robert.jarzmik@free.fr>

[ Upstream commit 46acbcb4849b2ca2e6e975e7c8130c1d61c8fd0c ]

The pxa27x platforms have a single IP with 2 drivers, sa1100-rtc and
rtc-pxa drivers.

A previous patch fixed the sa1100-rtc case, but the pxa-rtc wasn't
fixed. This patch completes the previous one.

Fixes: 8b6d10345e16 ("clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Link: https://lkml.kernel.org/r/20191026194420.11918-1-robert.jarzmik@free.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/pxa/clk-pxa27x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/pxa/clk-pxa27x.c b/drivers/clk/pxa/clk-pxa27x.c
index 5b82d30baf9f3..bf47737b66722 100644
--- a/drivers/clk/pxa/clk-pxa27x.c
+++ b/drivers/clk/pxa/clk-pxa27x.c
@@ -362,6 +362,7 @@ struct dummy_clk {
 };
 static struct dummy_clk dummy_clks[] __initdata = {
 	DUMMY_CLK(NULL, "pxa27x-gpio", "osc_32_768khz"),
+	DUMMY_CLK(NULL, "pxa-rtc", "osc_32_768khz"),
 	DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"),
 	DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"),
 };
-- 
2.20.1

[PATCH AUTOSEL 4.4 25/37] bcache: at least try to shrink 1 node in bch_mca_scan()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit 9fcc34b1a6dd4b8e5337e2b6ef45e428897eca6b ]

In bch_mca_scan(), the number of shrinking btree node is calculated
by code like this,
	unsigned long nr = sc->nr_to_scan;

        nr /= c->btree_pages;
        nr = min_t(unsigned long, nr, mca_can_free(c));
variable sc->nr_to_scan is number of objects (here is bcache B+tree
nodes' number) to shrink, and pointer variable sc is sent from memory
management code as parametr of a callback.

If sc->nr_to_scan is smaller than c->btree_pages, after the above
calculation, variable 'nr' will be 0 and nothing will be shrunk. It is
frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make
nr to be zero. Then bch_mca_scan() will do nothing more then acquiring
and releasing mutex c->bucket_lock.

This patch checkes whether nr is 0 after the above calculation, if 0
is the result then set 1 to variable 'n'. Then at least bch_mca_scan()
will try to shrink a single B+tree node.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/btree.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c
index 05aa3ac1381ba..5c93582c71cc6 100644
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -686,6 +686,8 @@ static unsigned long bch_mca_scan(struct shrinker *shrink,
 	 * IO can always make forward progress:
 	 */
 	nr /= c->btree_pages;
+	if (nr == 0)
+		nr = 1;
 	nr = min_t(unsigned long, nr, mca_can_free(c));
 
 	i = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.4 26/37] HID: Improve Windows Precision Touchpad detection.

[Sasha Levin]

From: Blaž Hrastnik <blaz@mxxn.io>

[ Upstream commit 2dbc6f113acd74c66b04bf49fb027efd830b1c5a ]

Per Microsoft spec, usage 0xC5 (page 0xFF) returns a blob containing
data used to verify the touchpad as a Windows Precision Touchpad.

   0x85, REPORTID_PTPHQA,    //    REPORT_ID (PTPHQA)
    0x09, 0xC5,              //    USAGE (Vendor Usage 0xC5)
    0x15, 0x00,              //    LOGICAL_MINIMUM (0)
    0x26, 0xff, 0x00,        //    LOGICAL_MAXIMUM (0xff)
    0x75, 0x08,              //    REPORT_SIZE (8)
    0x96, 0x00, 0x01,        //    REPORT_COUNT (0x100 (256))
    0xb1, 0x02,              //    FEATURE (Data,Var,Abs)

However, some devices, namely Microsoft's Surface line of products
instead implement a "segmented device certification report" (usage 0xC6)
which returns the same report, but in smaller chunks.

    0x06, 0x00, 0xff,        //     USAGE_PAGE (Vendor Defined)
    0x85, REPORTID_PTPHQA,   //     REPORT_ID (PTPHQA)
    0x09, 0xC6,              //     USAGE (Vendor usage for segment #)
    0x25, 0x08,              //     LOGICAL_MAXIMUM (8)
    0x75, 0x08,              //     REPORT_SIZE (8)
    0x95, 0x01,              //     REPORT_COUNT (1)
    0xb1, 0x02,              //     FEATURE (Data,Var,Abs)
    0x09, 0xC7,              //     USAGE (Vendor Usage)
    0x26, 0xff, 0x00,        //     LOGICAL_MAXIMUM (0xff)
    0x95, 0x20,              //     REPORT_COUNT (32)
    0xb1, 0x02,              //     FEATURE (Data,Var,Abs)

By expanding Win8 touchpad detection to also look for the segmented
report, all Surface touchpads are now properly recognized by
hid-multitouch.

Signed-off-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index c60bb6f8eceb0..7cd9455754636 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -761,6 +761,10 @@ static void hid_scan_feature_usage(struct hid_parser *parser, u32 usage)
 	if (usage == 0xff0000c5 && parser->global.report_count == 256 &&
 	    parser->global.report_size == 8)
 		parser->scan_flags |= HID_SCAN_FLAG_MT_WIN_8;
+
+	if (usage == 0xff0000c6 && parser->global.report_count == 1 &&
+	    parser->global.report_size == 8)
+		parser->scan_flags |= HID_SCAN_FLAG_MT_WIN_8;
 }
 
 static void hid_scan_collection(struct hid_parser *parser, unsigned type)
-- 
2.20.1

[PATCH AUTOSEL 4.4 27/37] ext4: work around deleting a file with i_nlink == 0 safely

[Sasha Levin]

From: Theodore Ts'o <tytso@mit.edu>

[ Upstream commit c7df4a1ecb8579838ec8c56b2bb6a6716e974f37 ]

If the file system is corrupted such that a file's i_links_count is
too small, then it's possible that when unlinking that file, i_nlink
will already be zero.  Previously we were working around this kind of
corruption by forcing i_nlink to one; but we were doing this before
trying to delete the directory entry --- and if the file system is
corrupted enough that ext4_delete_entry() fails, then we exit with
i_nlink elevated, and this causes the orphan inode list handling to be
FUBAR'ed, such that when we unmount the file system, the orphan inode
list can get corrupted.

A better way to fix this is to simply skip trying to call drop_nlink()
if i_nlink is already zero, thus moving the check to the place where
it makes the most sense.

https://bugzilla.kernel.org/show_bug.cgi?id=205433

Link: https://lore.kernel.org/r/20191112032903.8828-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/namei.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index aa08e129149dc..712bf332e3948 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -3040,18 +3040,17 @@ static int ext4_unlink(struct inode *dir, struct dentry *dentry)
 	if (IS_DIRSYNC(dir))
 		ext4_handle_sync(handle);
 
-	if (inode->i_nlink == 0) {
-		ext4_warning_inode(inode, "Deleting file '%.*s' with no links",
-				   dentry->d_name.len, dentry->d_name.name);
-		set_nlink(inode, 1);
-	}
 	retval = ext4_delete_entry(handle, dir, de, bh);
 	if (retval)
 		goto end_unlink;
 	dir->i_ctime = dir->i_mtime = ext4_current_time(dir);
 	ext4_update_dx_flag(dir);
 	ext4_mark_inode_dirty(handle, dir);
-	drop_nlink(inode);
+	if (inode->i_nlink == 0)
+		ext4_warning_inode(inode, "Deleting file '%.*s' with no links",
+				   dentry->d_name.len, dentry->d_name.name);
+	else
+		drop_nlink(inode);
 	if (!inode->i_nlink)
 		ext4_orphan_add(handle, inode);
 	inode->i_ctime = ext4_current_time(inode);
-- 
2.20.1

[PATCH AUTOSEL 4.4 28/37] scsi: pm80xx: Fix for SATA device discovery

[Sasha Levin]

From: peter chang <dpf@google.com>

[ Upstream commit ce21c63ee995b7a8b7b81245f2cee521f8c3c220 ]

Driver was missing complete() call in mpi_sata_completion which result in
SATA abort error handling timing out. That causes the device to be left in
the in_recovery state so subsequent commands sent to the device fail and
the OS removes access to it.

Link: https://lore.kernel.org/r/20191114100910.6153-2-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 9edd61c063a1a..df5f0bc295875 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2368,6 +2368,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 			pm8001_printk("task 0x%p done with io_status 0x%x"
 			" resp 0x%x stat 0x%x but aborted by upper layer!\n",
 			t, status, ts->resp, ts->stat));
+		if (t->slow_task)
+			complete(&t->slow_task->completion);
 		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
 	} else {
 		spin_unlock_irqrestore(&t->task_state_lock, flags);
-- 
2.20.1

[PATCH AUTOSEL 4.4 29/37] scsi: target: iscsi: Wait for all commands to finish before freeing a session

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit e9d3009cb936bd0faf0719f68d98ad8afb1e613b ]

The iSCSI target driver is the only target driver that does not wait for
ongoing commands to finish before freeing a session. Make the iSCSI target
driver wait for ongoing commands to finish before freeing a session. This
patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710
Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247

CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: target_completion target_complete_ok_work [target_core_mod]
Call Trace:
 dump_stack+0x8a/0xd6
 print_address_description.constprop.0+0x40/0x60
 __kasan_report.cold+0x1b/0x33
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 __lock_acquire+0xb1a/0x2710
 lock_acquire+0xd3/0x200
 _raw_spin_lock_irqsave+0x43/0x60
 target_release_cmd_kref+0x162/0x7f0 [target_core_mod]
 target_put_sess_cmd+0x2e/0x40 [target_core_mod]
 lio_check_stop_free+0x12/0x20 [iscsi_target_mod]
 transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod]
 target_complete_ok_work+0x1b0/0x790 [target_core_mod]
 process_one_work+0x549/0xa40
 worker_thread+0x7a/0x5d0
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Allocated by task 889:
 save_stack+0x23/0x90
 __kasan_kmalloc.constprop.0+0xcf/0xe0
 kasan_slab_alloc+0x12/0x20
 kmem_cache_alloc+0xf6/0x360
 transport_alloc_session+0x29/0x80 [target_core_mod]
 iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Freed by task 1025:
 save_stack+0x23/0x90
 __kasan_slab_free+0x13a/0x190
 kasan_slab_free+0x12/0x20
 kmem_cache_free+0x146/0x400
 transport_free_session+0x179/0x2f0 [target_core_mod]
 transport_deregister_session+0x130/0x180 [target_core_mod]
 iscsit_close_session+0x12c/0x350 [iscsi_target_mod]
 iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod]
 iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod]
 iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

The buggy address belongs to the object at ffff8881154ec9c0
 which belongs to the cache se_sess_cache of size 352
The buggy address is located 176 bytes inside of
 352-byte region [ffff8881154ec9c0, ffff8881154ecb20)
The buggy address belongs to the page:
page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0
flags: 0x2fff000000010200(slab|head)
raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400
raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                             ^
 ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc

Cc: Mike Christie <mchristi@redhat.com>
Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.org
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target.c | 10 ++++++++--
 include/scsi/iscsi_proto.h          |  1 +
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index cbb4414edd71b..564828554ca02 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -993,7 +993,9 @@ int iscsit_setup_scsi_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 		hdr->cmdsn, be32_to_cpu(hdr->data_length), payload_length,
 		conn->cid);
 
-	target_get_sess_cmd(&cmd->se_cmd, true);
+	if (target_get_sess_cmd(&cmd->se_cmd, true) < 0)
+		return iscsit_add_reject_cmd(cmd,
+				ISCSI_REASON_WAITING_FOR_LOGOUT, buf);
 
 	cmd->sense_reason = transport_lookup_cmd_lun(&cmd->se_cmd,
 						     scsilun_to_int(&hdr->lun));
@@ -1804,7 +1806,9 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 			      conn->sess->se_sess, 0, DMA_NONE,
 			      TCM_SIMPLE_TAG, cmd->sense_buffer + 2);
 
-	target_get_sess_cmd(&cmd->se_cmd, true);
+	if (target_get_sess_cmd(&cmd->se_cmd, true) < 0)
+		return iscsit_add_reject_cmd(cmd,
+				ISCSI_REASON_WAITING_FOR_LOGOUT, buf);
 
 	/*
 	 * TASK_REASSIGN for ERL=2 / connection stays inside of
@@ -4390,6 +4394,8 @@ int iscsit_close_connection(
 	 * must wait until they have completed.
 	 */
 	iscsit_check_conn_usage_count(conn);
+	target_sess_cmd_list_set_waiting(sess->se_sess);
+	target_wait_for_sess_cmds(sess->se_sess);
 
 	if (conn->conn_rx_hash.tfm)
 		crypto_free_hash(conn->conn_rx_hash.tfm);
diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h
index c1260d80ef30d..1a2ae0862e23a 100644
--- a/include/scsi/iscsi_proto.h
+++ b/include/scsi/iscsi_proto.h
@@ -638,6 +638,7 @@ struct iscsi_reject {
 #define ISCSI_REASON_BOOKMARK_INVALID	9
 #define ISCSI_REASON_BOOKMARK_NO_RESOURCES	10
 #define ISCSI_REASON_NEGOTIATION_RESET	11
+#define ISCSI_REASON_WAITING_FOR_LOGOUT	12
 
 /* Max. number of Key=Value pairs in a text message */
 #define MAX_KEY_VALUE_PAIRS	8192
-- 
2.20.1

[PATCH AUTOSEL 4.4 30/37] gpio: mpc8xxx: Don't overwrite default irq_set_type callback

[Sasha Levin]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 4e50573f39229d5e9c985fa3b4923a8b29619ade ]

The per-SoC devtype structures can contain their own callbacks that
overwrite mpc8xxx_gpio_devtype_default.

The clear intention is that mpc8xxx_irq_set_type is used in case the SoC
does not specify a more specific callback. But what happens is that if
the SoC doesn't specify one, its .irq_set_type is de-facto NULL, and
this overwrites mpc8xxx_irq_set_type to a no-op. This means that the
following SoCs are affected:

- fsl,mpc8572-gpio
- fsl,ls1028a-gpio
- fsl,ls1088a-gpio

On these boards, the irq_set_type does exactly nothing, and the GPIO
controller keeps its GPICR register in the hardware-default state. On
the LS1028A, that is ACTIVE_BOTH, which means 2 interrupts are raised
even if the IRQ client requests LEVEL_HIGH. Another implication is that
the IRQs are not checked (e.g. level-triggered interrupts are not
rejected, although they are not supported).

Fixes: 82e39b0d8566 ("gpio: mpc8xxx: handle differences between incarnations at a single place")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20191115125551.31061-1-olteanv@gmail.com
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-mpc8xxx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 9e02cb6afb0bb..ce6e15167d0b2 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -409,7 +409,8 @@ static int mpc8xxx_probe(struct platform_device *pdev)
 	 * It's assumed that only a single type of gpio controller is available
 	 * on the current machine, so overwriting global data is fine.
 	 */
-	mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type;
+	if (devtype->irq_set_type)
+		mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type;
 
 	gc->direction_output = devtype->gpio_dir_out ?: mpc8xxx_gpio_dir_out;
 	gc->get = devtype->gpio_get ?: mpc8xxx_gpio_get;
-- 
2.20.1

[PATCH AUTOSEL 4.4 31/37] scripts/kallsyms: fix definitely-lost memory leak

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit 21915eca088dc271c970e8351290e83d938114ac ]

build_initial_tok_table() overwrites unused sym_entry to shrink the
table size. Before the entry is overwritten, table[i].sym must be freed
since it is malloc'ed data.

This fixes the 'definitely lost' report from valgrind. I ran valgrind
against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary:

[Before the fix]

  LEAK SUMMARY:
     definitely lost: 53,184 bytes in 2,874 blocks

[After the fix]

  LEAK SUMMARY:
     definitely lost: 0 bytes in 0 blocks

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kallsyms.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index d117c68d1607b..b92b704e7ace3 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -455,6 +455,8 @@ static void build_initial_tok_table(void)
 				table[pos] = table[i];
 			learn_symbol(table[pos].sym, table[pos].len);
 			pos++;
+		} else {
+			free(table[i].sym);
 		}
 	}
 	table_cnt = pos;
-- 
2.20.1

[PATCH AUTOSEL 4.4 32/37] cdrom: respect device capabilities during opening action

[Sasha Levin]

From: Diego Elio Pettenò <flameeyes@flameeyes.com>

[ Upstream commit 366ba7c71ef77c08d06b18ad61b26e2df7352338 ]

Reading the TOC only works if the device can play audio, otherwise
these commands fail (and possibly bring the device to an unhealthy
state.)

Similarly, cdrom_mmc3_profile() should only be called if the device
supports generic packet commands.

To: Jens Axboe <axboe@kernel.dk>
Cc: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cdrom/cdrom.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index aee23092f50e9..2c5feb6b4a998 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -998,6 +998,12 @@ static void cdrom_count_tracks(struct cdrom_device_info *cdi, tracktype *tracks)
 	tracks->xa = 0;
 	tracks->error = 0;
 	cd_dbg(CD_COUNT_TRACKS, "entering cdrom_count_tracks\n");
+
+	if (!CDROM_CAN(CDC_PLAY_AUDIO)) {
+		tracks->error = CDS_NO_INFO;
+		return;
+	}
+
 	/* Grab the TOC header so we can see how many tracks there are */
 	ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCHDR, &header);
 	if (ret) {
@@ -1164,7 +1170,8 @@ int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev,
 		ret = open_for_data(cdi);
 		if (ret)
 			goto err;
-		cdrom_mmc3_profile(cdi);
+		if (CDROM_CAN(CDC_GENERIC_PACKET))
+			cdrom_mmc3_profile(cdi);
 		if (mode & FMODE_WRITE) {
 			ret = -EROFS;
 			if (cdrom_open_write(cdi))
@@ -2863,6 +2870,9 @@ int cdrom_get_last_written(struct cdrom_device_info *cdi, long *last_written)
 	   it doesn't give enough information or fails. then we return
 	   the toc contents. */
 use_toc:
+	if (!CDROM_CAN(CDC_PLAY_AUDIO))
+		return -ENOSYS;
+
 	toc.cdte_format = CDROM_MSF;
 	toc.cdte_track = CDROM_LEADOUT;
 	if ((ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCENTRY, &toc)))
-- 
2.20.1

[PATCH AUTOSEL 4.4 33/37] perf regs: Make perf_reg_name() return "unknown" instead of NULL

[Sasha Levin]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 5b596e0ff0e1852197d4c82d3314db5e43126bf7 ]

To avoid breaking the build on arches where this is not wired up, at
least all the other features should be made available and when using
this specific routine, the "unknown" should point the user/developer to
the need to wire this up on this particular hardware architecture.

Detected in a container mipsel debian cross build environment, where it
shows up as:

  In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,
                   from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
                   from util/session.c:13:
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2:
  /usr/mipsel-linux-gnu/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cross compiler details:

  mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909

Also on mips64:

  In file included from /usr/mips64-linux-gnuabi64/include/stdio.h:867,
                   from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
                   from util/session.c:13:
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2,
      inlined from 'regs_user__printf' at util/session.c:1139:3,
      inlined from 'dump_sample' at util/session.c:1246:3,
      inlined from 'machines__deliver_event' at util/session.c:1421:3:
  /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2,
      inlined from 'regs_intr__printf' at util/session.c:1147:3,
      inlined from 'dump_sample' at util/session.c:1249:3,
      inlined from 'machines__deliver_event' at util/session.c:1421:3:
  /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cross compiler details:

  mips64-linux-gnuabi64-gcc (Debian 9.2.1-8) 9.2.1 20190909

Fixes: 2bcd355b71da ("perf tools: Add interface to arch registers sets")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-95wjyv4o65nuaeweq31t7l1s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/perf_regs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/perf_regs.h b/tools/perf/util/perf_regs.h
index 679d6e4939622..e6324397b295b 100644
--- a/tools/perf/util/perf_regs.h
+++ b/tools/perf/util/perf_regs.h
@@ -26,7 +26,7 @@ int perf_reg_value(u64 *valp, struct regs_dump *regs, int id);
 
 static inline const char *perf_reg_name(int id __maybe_unused)
 {
-	return NULL;
+	return "unknown";
 }
 
 static inline int perf_reg_value(u64 *valp __maybe_unused,
-- 
2.20.1

[PATCH AUTOSEL 4.4 34/37] libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit a8de1304b7df30e3a14f2a8b9709bb4ff31a0385 ]

The DTC v1.5.1 added references to (U)INT32_MAX.

This is no problem for user-space programs since <stdint.h> defines
(U)INT32_MAX along with (u)int32_t.

For the kernel space, libfdt_env.h needs to be adjusted before we
pull in the changes.

In the kernel, we usually use s/u32 instead of (u)int32_t for the
fixed-width types.

Accordingly, we already have S/U32_MAX for their max values.
So, we should not add (U)INT32_MAX to <linux/limits.h> any more.

Instead, add them to the in-kernel libfdt_env.h to compile the
latest libfdt.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/compressed/libfdt_env.h | 4 +++-
 arch/powerpc/boot/libfdt_env.h        | 2 ++
 include/linux/libfdt_env.h            | 3 +++
 3 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
index 005bf4ff1b4cb..f3ddd4f599e3e 100644
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -1,11 +1,13 @@
 #ifndef _ARM_LIBFDT_ENV_H
 #define _ARM_LIBFDT_ENV_H
 
+#include <linux/limits.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <asm/byteorder.h>
 
-#define INT_MAX			((int)(~0U>>1))
+#define INT32_MAX	S32_MAX
+#define UINT32_MAX	U32_MAX
 
 typedef __be16 fdt16_t;
 typedef __be32 fdt32_t;
diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h
index 0b3db6322c793..5f2cb1c53e151 100644
--- a/arch/powerpc/boot/libfdt_env.h
+++ b/arch/powerpc/boot/libfdt_env.h
@@ -5,6 +5,8 @@
 #include <string.h>
 
 #define INT_MAX			((int)(~0U>>1))
+#define UINT32_MAX		((u32)~0U)
+#define INT32_MAX		((s32)(UINT32_MAX >> 1))
 
 #include "of.h"
 
diff --git a/include/linux/libfdt_env.h b/include/linux/libfdt_env.h
index 8850e243c9406..bd0a55821177a 100644
--- a/include/linux/libfdt_env.h
+++ b/include/linux/libfdt_env.h
@@ -6,6 +6,9 @@
 
 #include <asm/byteorder.h>
 
+#define INT32_MAX	S32_MAX
+#define UINT32_MAX	U32_MAX
+
 typedef __be16 fdt16_t;
 typedef __be32 fdt32_t;
 typedef __be64 fdt64_t;
-- 
2.20.1

[PATCH AUTOSEL 4.4 35/37] s390/cpum_sf: Check for SDBT and SDB consistency

[Sasha Levin]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit 247f265fa502e7b17a0cb0cc330e055a36aafce4 ]

Each SBDT is located at a 4KB page and contains 512 entries.
Each entry of a SDBT points to a SDB, a 4KB page containing
sampled data. The last entry is a link to another SDBT page.

When an event is created the function sequence executed is:

  __hw_perf_event_init()
  +--> allocate_buffers()
       +--> realloc_sampling_buffers()
	    +---> alloc_sample_data_block()

Both functions realloc_sampling_buffers() and
alloc_sample_data_block() allocate pages and the allocation
can fail. This is handled correctly and all allocated
pages are freed and error -ENOMEM is returned to the
top calling function. Finally the event is not created.

Once the event has been created, the amount of initially
allocated SDBT and SDB can be too low. This is detected
during measurement interrupt handling, where the amount
of lost samples is calculated. If the number of lost samples
is too high considering sampling frequency and already allocated
SBDs, the number of SDBs is enlarged during the next execution
of cpumsf_pmu_enable().

If more SBDs need to be allocated, functions

       realloc_sampling_buffers()
       +---> alloc-sample_data_block()

are called to allocate more pages. Page allocation may fail
and the returned error is ignored. A SDBT and SDB setup
already exists.

However the modified SDBTs and SDBs might end up in a situation
where the first entry of an SDBT does not point to an SDB,
but another SDBT, basicly an SBDT without payload.
This can not be handled by the interrupt handler, where an SDBT
must have at least one entry pointing to an SBD.

Add a check to avoid SDBTs with out payload (SDBs) when enlarging
the buffer setup.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/perf_cpum_sf.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 874762a51c546..7490c52b27153 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -185,7 +185,7 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb,
 				   unsigned long num_sdb, gfp_t gfp_flags)
 {
 	int i, rc;
-	unsigned long *new, *tail;
+	unsigned long *new, *tail, *tail_prev = NULL;
 
 	if (!sfb->sdbt || !sfb->tail)
 		return -EINVAL;
@@ -224,6 +224,7 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb,
 			sfb->num_sdbt++;
 			/* Link current page to tail of chain */
 			*tail = (unsigned long)(void *) new + 1;
+			tail_prev = tail;
 			tail = new;
 		}
 
@@ -233,10 +234,22 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb,
 		 * issue, a new realloc call (if required) might succeed.
 		 */
 		rc = alloc_sample_data_block(tail, gfp_flags);
-		if (rc)
+		if (rc) {
+			/* Undo last SDBT. An SDBT with no SDB at its first
+			 * entry but with an SDBT entry instead can not be
+			 * handled by the interrupt handler code.
+			 * Avoid this situation.
+			 */
+			if (tail_prev) {
+				sfb->num_sdbt--;
+				free_page((unsigned long) new);
+				tail = tail_prev;
+			}
 			break;
+		}
 		sfb->num_sdb++;
 		tail++;
+		tail_prev = new = NULL;	/* Allocated at least one SBD */
 	}
 
 	/* Link sampling buffer to its origin */
-- 
2.20.1

[PATCH AUTOSEL 4.4 36/37] ocfs2: fix passing zero to 'PTR_ERR' warning

[Sasha Levin]

From: Ding Xiang <dingxiang@cmss.chinamobile.com>

[ Upstream commit 188c523e1c271d537f3c9f55b6b65bf4476de32f ]

Fix a static code checker warning:
fs/ocfs2/acl.c:331
	ocfs2_acl_chmod() warn: passing zero to 'PTR_ERR'

Link: http://lkml.kernel.org/r/1dee278b-6c96-eec2-ce76-fe6e07c6e20f@linux.alibaba.com
Fixes: 5ee0fbd50fd ("ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/acl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
index 1e0d8da0d3cd6..80b92120c8120 100644
--- a/fs/ocfs2/acl.c
+++ b/fs/ocfs2/acl.c
@@ -338,8 +338,8 @@ int ocfs2_acl_chmod(struct inode *inode, struct buffer_head *bh)
 	down_read(&OCFS2_I(inode)->ip_xattr_sem);
 	acl = ocfs2_get_acl_nolock(inode, ACL_TYPE_ACCESS, bh);
 	up_read(&OCFS2_I(inode)->ip_xattr_sem);
-	if (IS_ERR(acl) || !acl)
-		return PTR_ERR(acl);
+	if (IS_ERR_OR_NULL(acl))
+		return PTR_ERR_OR_ZERO(acl);
 	ret = __posix_acl_chmod(&acl, GFP_KERNEL, inode->i_mode);
 	if (ret)
 		return ret;
-- 
2.20.1

[PATCH AUTOSEL 4.4 37/37] kernel: sysctl: make drop_caches write-only

[Sasha Levin]

From: Johannes Weiner <hannes@cmpxchg.org>

[ Upstream commit 204cb79ad42f015312a5bbd7012d09c93d9b46fb ]

Currently, the drop_caches proc file and sysctl read back the last value
written, suggesting this is somehow a stateful setting instead of a
one-time command.  Make it write-only, like e.g.  compact_memory.

While mitigating a VM problem at scale in our fleet, there was confusion
about whether writing to this file will permanently switch the kernel into
a non-caching mode.  This influences the decision making in a tense
situation, where tens of people are trying to fix tens of thousands of
affected machines: Do we need a rollback strategy?  What are the
performance implications of operating in a non-caching state for several
days?  It also caused confusion when the kernel team said we may need to
write the file several times to make sure it's effective ("But it already
reads back 3?").

Link: http://lkml.kernel.org/r/20191031221602.9375-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sysctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 24c7fe8608d02..c2dddd335d064 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1357,7 +1357,7 @@ static struct ctl_table vm_table[] = {
 		.procname	= "drop_caches",
 		.data		= &sysctl_drop_caches,
 		.maxlen		= sizeof(int),
-		.mode		= 0644,
+		.mode		= 0200,
 		.proc_handler	= drop_caches_sysctl_handler,
 		.extra1		= &one,
 		.extra2		= &four,
-- 
2.20.1

Re: [PATCH AUTOSEL 4.4 27/37] ext4: work around deleting a file with i_nlink == 0 safely

[Theodore Y. Ts'o]

On Wed, Dec 11, 2019 at 10:38:03AM -0500, Sasha Levin wrote:
> From: Theodore Ts'o <tytso@mit.edu>
> 
> [ Upstream commit c7df4a1ecb8579838ec8c56b2bb6a6716e974f37 ]
> 
> If the file system is corrupted such that a file's i_links_count is
> too small, then it's possible that when unlinking that file, i_nlink
> will already be zero.  Previously we were working around this kind of
> corruption by forcing i_nlink to one; but we were doing this before
> trying to delete the directory entry --- and if the file system is
> corrupted enough that ext4_delete_entry() fails, then we exit with
> i_nlink elevated, and this causes the orphan inode list handling to be
> FUBAR'ed, such that when we unmount the file system, the orphan inode
> list can get corrupted.
> 
> A better way to fix this is to simply skip trying to call drop_nlink()
> if i_nlink is already zero, thus moving the check to the place where
> it makes the most sense.
> 
> https://bugzilla.kernel.org/show_bug.cgi?id=205433
> 
> Link: https://lore.kernel.org/r/20191112032903.8828-1-tytso@mit.edu
> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
> Cc: stable@kernel.org
> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

I'm confused; this was explicitly cc'ed to stable@kernel.org, so why
is your AUTOSEL picking this up?  I would have thought this would get
picked up via the normal stable kernel processes.

Thanks,

						- Ted

Re: [PATCH AUTOSEL 4.4 27/37] ext4: work around deleting a file with i_nlink == 0 safely

[Greg KH]

On Wed, Dec 11, 2019 at 11:19:59AM -0500, Theodore Y. Ts'o wrote:
> On Wed, Dec 11, 2019 at 10:38:03AM -0500, Sasha Levin wrote:
> > From: Theodore Ts'o <tytso@mit.edu>
> > 
> > [ Upstream commit c7df4a1ecb8579838ec8c56b2bb6a6716e974f37 ]
> > 
> > If the file system is corrupted such that a file's i_links_count is
> > too small, then it's possible that when unlinking that file, i_nlink
> > will already be zero.  Previously we were working around this kind of
> > corruption by forcing i_nlink to one; but we were doing this before
> > trying to delete the directory entry --- and if the file system is
> > corrupted enough that ext4_delete_entry() fails, then we exit with
> > i_nlink elevated, and this causes the orphan inode list handling to be
> > FUBAR'ed, such that when we unmount the file system, the orphan inode
> > list can get corrupted.
> > 
> > A better way to fix this is to simply skip trying to call drop_nlink()
> > if i_nlink is already zero, thus moving the check to the place where
> > it makes the most sense.
> > 
> > https://bugzilla.kernel.org/show_bug.cgi?id=205433
> > 
> > Link: https://lore.kernel.org/r/20191112032903.8828-1-tytso@mit.edu
> > Signed-off-by: Theodore Ts'o <tytso@mit.edu>
> > Cc: stable@kernel.org
> > Reviewed-by: Andreas Dilger <adilger@dilger.ca>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> 
> I'm confused; this was explicitly cc'ed to stable@kernel.org, so why
> is your AUTOSEL picking this up?  I would have thought this would get
> picked up via the normal stable kernel processes.

Perhaps because it is still in my queue, I haven't gotten there yet, but
will do so after this next round of -rcs are released.

thanks,

greg k-h

Re: [PATCH AUTOSEL 4.4 27/37] ext4: work around deleting a file with i_nlink == 0 safely

[Sasha Levin]

On Wed, Dec 11, 2019 at 11:19:59AM -0500, Theodore Y. Ts'o wrote:
>On Wed, Dec 11, 2019 at 10:38:03AM -0500, Sasha Levin wrote:
>> From: Theodore Ts'o <tytso@mit.edu>
>>
>> [ Upstream commit c7df4a1ecb8579838ec8c56b2bb6a6716e974f37 ]
>>
>> If the file system is corrupted such that a file's i_links_count is
>> too small, then it's possible that when unlinking that file, i_nlink
>> will already be zero.  Previously we were working around this kind of
>> corruption by forcing i_nlink to one; but we were doing this before
>> trying to delete the directory entry --- and if the file system is
>> corrupted enough that ext4_delete_entry() fails, then we exit with
>> i_nlink elevated, and this causes the orphan inode list handling to be
>> FUBAR'ed, such that when we unmount the file system, the orphan inode
>> list can get corrupted.
>>
>> A better way to fix this is to simply skip trying to call drop_nlink()
>> if i_nlink is already zero, thus moving the check to the place where
>> it makes the most sense.
>>
>> https://bugzilla.kernel.org/show_bug.cgi?id=205433
>>
>> Link: https://lore.kernel.org/r/20191112032903.8828-1-tytso@mit.edu
>> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
>> Cc: stable@kernel.org
>> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>I'm confused; this was explicitly cc'ed to stable@kernel.org, so why
>is your AUTOSEL picking this up?  I would have thought this would get
>picked up via the normal stable kernel processes.

My mistake, appologies.

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 4.4 27/37] ext4: work around deleting a file with i_nlink == 0 safely

[Theodore Y. Ts'o]

On Wed, Dec 11, 2019 at 03:04:54PM -0500, Sasha Levin wrote:
> > I'm confused; this was explicitly cc'ed to stable@kernel.org, so why
> > is your AUTOSEL picking this up?  I would have thought this would get
> > picked up via the normal stable kernel processes.
> 
> My mistake, appologies.

No worries; the intent was that it be backported to stable, and I
don't really care with path it takes.

I just wanted to make sure there wouldn't be confusion if you
backported it to stable, and then Greg tried and then got a merge
conflict.  (Or worse, if the patch was one of the ones where it can be
successfully applied *twice* w/o a patch conflict; I'm not sure if git
cherry-pick is smarter than patch in this regard, but I don't think it
is?)

   	   	      	      	      	    	  - Ted

Re: [PATCH AUTOSEL 4.4 27/37] ext4: work around deleting a file with i_nlink == 0 safely

[Sasha Levin]

On Thu, Dec 12, 2019 at 10:17:06AM -0500, Theodore Y. Ts'o wrote:
>On Wed, Dec 11, 2019 at 03:04:54PM -0500, Sasha Levin wrote:
>> > I'm confused; this was explicitly cc'ed to stable@kernel.org, so why
>> > is your AUTOSEL picking this up?  I would have thought this would get
>> > picked up via the normal stable kernel processes.
>>
>> My mistake, appologies.
>
>No worries; the intent was that it be backported to stable, and I
>don't really care with path it takes.
>
>I just wanted to make sure there wouldn't be confusion if you
>backported it to stable, and then Greg tried and then got a merge
>conflict.  (Or worse, if the patch was one of the ones where it can be
>successfully applied *twice* w/o a patch conflict; I'm not sure if git
>cherry-pick is smarter than patch in this regard, but I don't think it
>is?)

This one was just due to me running a bit faster then usual. I generally
don't filter out stable tagged commits and Greg just gets to them faster
than me (the delay on AUTOSEL is bigger than stable tagged commits).

-- 
Thanks,
Sasha