[PATCH v2 0/4] irqchip/meson-gpio: Add support for Meson-A1 SoC

[PATCH v2 0/4] irqchip/meson-gpio: Add support for Meson-A1 SoC

[Qianggui Song]

This patchset adds support for GPIO interrupt controller of Meson-A1 SoC
which use new register layout, two main things are done in the patchset
1. rework current driver
2. add a1 support

changes since v1 at [0]
 - place initial macro after the definition of param structure
 - make common data as parameter of initial macro
 - add dummy init function for previous chips

[0]https://lore.kernel.org/linux-amlogic/20191206121714.14579-1-qianggui.song@amlogic.com

Qianggui Song (4):
  dt-bindings: interrupt-controller: New binding for Meson-A1 SoCs
  irqchip/meson-gpio: rework meson irqchip driver to support meson-A1
    SoCs
  irqchip/meson-gpio: Add support for meson a1 SoCs
  arm64: dts: meson: a1: add gpio interrupt controller support

 .../amlogic,meson-gpio-intc.txt               |   1 +
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi     |   9 ++
 drivers/irqchip/irq-meson-gpio.c              | 137 ++++++++++++++----
 3 files changed, 122 insertions(+), 25 deletions(-)

-- 
2.24.0

[PATCH v2 1/4] dt-bindings: interrupt-controller: New binding for Meson-A1 SoCs

[Qianggui Song]

Update dt-binding document for GPIO interrupt controller of Meson-A1 SoCs

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
 .../bindings/interrupt-controller/amlogic,meson-gpio-intc.txt    | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 684bb1cd75ec..23b18b92c558 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -17,6 +17,7 @@ Required properties:
     "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
     "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
     "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
+    "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an
-- 
2.24.0

[PATCH v2 2/4] irqchip/meson-gpio: rework meson irqchip driver to support meson-A1 SoCs

[Qianggui Song]

Since Meson-A1 SoCs register layout of gpio interrupt controller has
difference with previous chips, registers to decide irq line and offset
of trigger method are all changed, the current driver should be modified.

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
 drivers/irqchip/irq-meson-gpio.c | 95 +++++++++++++++++++++++---------
 1 file changed, 70 insertions(+), 25 deletions(-)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 829084b568fa..5a1a59e50bb3 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -30,44 +30,75 @@
  * stuck at 0. Bits 8 to 15 are responsive and have the expected
  * effect.
  */
-#define REG_EDGE_POL_EDGE(x)	BIT(x)
-#define REG_EDGE_POL_LOW(x)	BIT(16 + (x))
-#define REG_BOTH_EDGE(x)	BIT(8 + (x))
-#define REG_EDGE_POL_MASK(x)    (	\
-		REG_EDGE_POL_EDGE(x) |	\
-		REG_EDGE_POL_LOW(x)  |	\
-		REG_BOTH_EDGE(x))
+#define REG_EDGE_POL_EDGE(params, x)	BIT((params)->edge_single_offset + (x))
+#define REG_EDGE_POL_LOW(params, x)	BIT((params)->pol_low_offset + (x))
+#define REG_BOTH_EDGE(params, x)	BIT((params)->edge_both_offset + (x))
+#define REG_EDGE_POL_MASK(params, x)    (	\
+		REG_EDGE_POL_EDGE(params, x) |	\
+		REG_EDGE_POL_LOW(params, x)  |	\
+		REG_BOTH_EDGE(params, x))
 #define REG_PIN_SEL_SHIFT(x)	(((x) % 4) * 8)
 #define REG_FILTER_SEL_SHIFT(x)	((x) * 4)
 
+struct meson_gpio_irq_controller;
+static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				    unsigned int channel, unsigned long hwirq);
+static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl);
+
+struct irq_ctl_ops {
+	void (*gpio_irq_sel_pin)(struct meson_gpio_irq_controller *ctl,
+				 unsigned int channel, unsigned long hwirq);
+	void (*gpio_irq_init)(struct meson_gpio_irq_controller *ctl);
+};
+
 struct meson_gpio_irq_params {
 	unsigned int nr_hwirq;
 	bool support_edge_both;
+	unsigned int edge_both_offset;
+	unsigned int edge_single_offset;
+	unsigned int pol_low_offset;
+	unsigned int pin_sel_mask;
+	struct irq_ctl_ops ops;
 };
 
+#define INIT_MESON_COMMON(irqs, init, sel)			\
+	.nr_hwirq = irqs,					\
+	.ops = {						\
+		.gpio_irq_init = init,				\
+		.gpio_irq_sel_pin = sel,			\
+	},
+
+#define INIT_MESON8_COMMON_DATA(irqs)				\
+	INIT_MESON_COMMON(irqs, meson_gpio_irq_init_dummy,	\
+			  meson8_gpio_irq_sel_pin)		\
+	.edge_single_offset = 0,				\
+	.pol_low_offset = 16,					\
+	.pin_sel_mask = 0xff,					\
+
 static const struct meson_gpio_irq_params meson8_params = {
-	.nr_hwirq = 134,
+	INIT_MESON8_COMMON_DATA(134)
 };
 
 static const struct meson_gpio_irq_params meson8b_params = {
-	.nr_hwirq = 119,
+	INIT_MESON8_COMMON_DATA(119)
 };
 
 static const struct meson_gpio_irq_params gxbb_params = {
-	.nr_hwirq = 133,
+	INIT_MESON8_COMMON_DATA(133)
 };
 
 static const struct meson_gpio_irq_params gxl_params = {
-	.nr_hwirq = 110,
+	INIT_MESON8_COMMON_DATA(110)
 };
 
 static const struct meson_gpio_irq_params axg_params = {
-	.nr_hwirq = 100,
+	INIT_MESON8_COMMON_DATA(100)
 };
 
 static const struct meson_gpio_irq_params sm1_params = {
-	.nr_hwirq = 100,
+	INIT_MESON8_COMMON_DATA(100)
 	.support_edge_both = true,
+	.edge_both_offset = 8,
 };
 
 static const struct of_device_id meson_irq_gpio_matches[] = {
@@ -100,9 +131,22 @@ static void meson_gpio_irq_update_bits(struct meson_gpio_irq_controller *ctl,
 	writel_relaxed(tmp, ctl->base + reg);
 }
 
-static unsigned int meson_gpio_irq_channel_to_reg(unsigned int channel)
+static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl)
 {
-	return (channel < 4) ? REG_PIN_03_SEL : REG_PIN_47_SEL;
+}
+
+static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				    unsigned int channel, unsigned long hwirq)
+{
+	unsigned int reg_offset;
+	unsigned int bit_offset;
+
+	reg_offset = (channel < 4) ? REG_PIN_03_SEL : REG_PIN_47_SEL;
+	bit_offset = REG_PIN_SEL_SHIFT(channel);
+
+	meson_gpio_irq_update_bits(ctl, reg_offset,
+				   ctl->params->pin_sel_mask << bit_offset,
+				   hwirq << bit_offset);
 }
 
 static int
@@ -110,7 +154,7 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 			       unsigned long  hwirq,
 			       u32 **channel_hwirq)
 {
-	unsigned int reg, idx;
+	unsigned int idx;
 
 	spin_lock(&ctl->lock);
 
@@ -129,10 +173,7 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 	 * Setup the mux of the channel to route the signal of the pad
 	 * to the appropriate input of the GIC
 	 */
-	reg = meson_gpio_irq_channel_to_reg(idx);
-	meson_gpio_irq_update_bits(ctl, reg,
-				   0xff << REG_PIN_SEL_SHIFT(idx),
-				   hwirq << REG_PIN_SEL_SHIFT(idx));
+	ctl->params->ops.gpio_irq_sel_pin(ctl, idx, hwirq);
 
 	/*
 	 * Get the hwirq number assigned to this channel through
@@ -173,7 +214,9 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
 {
 	u32 val = 0;
 	unsigned int idx;
+	const struct meson_gpio_irq_params *params;
 
+	params = ctl->params;
 	idx = meson_gpio_irq_get_channel_idx(ctl, channel_hwirq);
 
 	/*
@@ -190,22 +233,22 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
 	 * precedence over the other edge/polarity settings
 	 */
 	if (type == IRQ_TYPE_EDGE_BOTH) {
-		if (!ctl->params->support_edge_both)
+		if (!params->support_edge_both)
 			return -EINVAL;
 
-		val |= REG_BOTH_EDGE(idx);
+		val |= REG_BOTH_EDGE(params, idx);
 	} else {
 		if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
-			val |= REG_EDGE_POL_EDGE(idx);
+			val |= REG_EDGE_POL_EDGE(params, idx);
 
 		if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))
-			val |= REG_EDGE_POL_LOW(idx);
+			val |= REG_EDGE_POL_LOW(params, idx);
 	}
 
 	spin_lock(&ctl->lock);
 
 	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
-				   REG_EDGE_POL_MASK(idx), val);
+				   REG_EDGE_POL_MASK(params, idx), val);
 
 	spin_unlock(&ctl->lock);
 
@@ -371,6 +414,8 @@ static int __init meson_gpio_irq_parse_dt(struct device_node *node,
 		return ret;
 	}
 
+	ctl->params->ops.gpio_irq_init(ctl);
+
 	return 0;
 }
 
-- 
2.24.0

[PATCH v2 3/4] irqchip/meson-gpio: Add support for meson a1 SoCs

[Qianggui Song]

The meson a1 Socs have some changes compared with previous
chips. For A113L, it contains 62 pins and can be spied on:

- 62:128 undefined
- 61:50 12 pins on bank A
- 49:37 13 pins on bank F
- 36:20 17 pins on bank X
- 19:13 7  pins on bank B
- 12:0  13 pins on bank P

There are five relative registers for gpio interrupt controller,
details are as below:

- PADCTRL_GPIO_IRQ_CTRL0
  bit[31]:    enable/disable the whole irq lines
  bit[16-23]: both edge trigger
  bit[8-15]:  single edge trigger
  bit[0-7]:   pol trigger

- PADCTRL_GPIO_IRQ_CTRL[X]
  bit[0-6]:   7 bits to choose gpio source for irq line 2*[X] - 2
  bit[16-22]: 7 bits to choose gpio source for irq line 2*[X] - 1
  where X =1,2,3,4

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
 drivers/irqchip/irq-meson-gpio.c | 42 ++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 5a1a59e50bb3..ccc7f823911b 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -24,6 +24,9 @@
 #define REG_PIN_47_SEL	0x08
 #define REG_FILTER_SEL	0x0c
 
+/* use for A1 like chips */
+#define REG_PIN_A1_SEL	0x04
+
 /*
  * Note: The S905X3 datasheet reports that BOTH_EDGE is controlled by
  * bits 24 to 31. Tests on the actual HW show that these bits are
@@ -44,6 +47,10 @@ struct meson_gpio_irq_controller;
 static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
 				    unsigned int channel, unsigned long hwirq);
 static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl);
+static void meson_a1_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				      unsigned int channel,
+				      unsigned long hwirq);
+static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl);
 
 struct irq_ctl_ops {
 	void (*gpio_irq_sel_pin)(struct meson_gpio_irq_controller *ctl,
@@ -75,6 +82,15 @@ struct meson_gpio_irq_params {
 	.pol_low_offset = 16,					\
 	.pin_sel_mask = 0xff,					\
 
+#define INIT_MESON_A1_COMMON_DATA(irqs)				\
+	INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init,		\
+			  meson_a1_gpio_irq_sel_pin)		\
+	.support_edge_both = true,				\
+	.edge_both_offset = 16,					\
+	.edge_single_offset = 8,				\
+	.pol_low_offset = 0,					\
+	.pin_sel_mask = 0x7f,					\
+
 static const struct meson_gpio_irq_params meson8_params = {
 	INIT_MESON8_COMMON_DATA(134)
 };
@@ -101,6 +117,10 @@ static const struct meson_gpio_irq_params sm1_params = {
 	.edge_both_offset = 8,
 };
 
+static const struct meson_gpio_irq_params a1_params = {
+	INIT_MESON_A1_COMMON_DATA(62)
+};
+
 static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson8-gpio-intc", .data = &meson8_params },
 	{ .compatible = "amlogic,meson8b-gpio-intc", .data = &meson8b_params },
@@ -109,6 +129,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson-axg-gpio-intc", .data = &axg_params },
 	{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
 	{ .compatible = "amlogic,meson-sm1-gpio-intc", .data = &sm1_params },
+	{ .compatible = "amlogic,meson-a1-gpio-intc", .data = &a1_params },
 	{ }
 };
 
@@ -149,6 +170,27 @@ static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
 				   hwirq << bit_offset);
 }
 
+static void meson_a1_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				      unsigned int channel,
+				      unsigned long hwirq)
+{
+	unsigned int reg_offset;
+	unsigned int bit_offset;
+
+	bit_offset = ((channel % 2) == 0) ? 0 : 16;
+	reg_offset = REG_PIN_A1_SEL + ((channel / 2) << 2);
+
+	meson_gpio_irq_update_bits(ctl, reg_offset,
+				   ctl->params->pin_sel_mask << bit_offset,
+				   hwirq << bit_offset);
+}
+
+/* For a1 or later chips like a1 there is a switch to enable/disable irq */
+static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl)
+{
+	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL, BIT(31), BIT(31));
+}
+
 static int
 meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 			       unsigned long  hwirq,
-- 
2.24.0

[PATCH v2 4/4] arm64: dts: meson: a1: add gpio interrupt controller support

[Qianggui Song]

add gpio interrupt controller node to a1 SoC

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 4dec518c4dde..e580d3e96c67 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -99,6 +99,15 @@ gpio: bank@0400 {
 
 			};
 
+			gpio_intc: interrupt-controller@0440 {
+				compatible = "amlogic,meson-gpio-intc",
+					     "amlogic,meson-a1-gpio-intc";
+				reg = <0x0 0x0440 0x0 0x14>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <49 50 51 52 53 54 55 56>;
+			};
+
 			uart_AO: serial@1c00 {
 				compatible = "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";
-- 
2.24.0

Re: [PATCH v2 1/4] dt-bindings: interrupt-controller: New binding for Meson-A1 SoCs

[Rob Herring]

On Mon, 16 Dec 2019 20:36:42 +0800, Qianggui Song wrote:
> Update dt-binding document for GPIO interrupt controller of Meson-A1 SoCs
> 
> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
> ---
>  .../bindings/interrupt-controller/amlogic,meson-gpio-intc.txt    | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 0/4] irqchip/meson-gpio: Add support for Meson-A1 SoC

[Marc Zyngier]

On 2019-12-16 13:36, Qianggui Song wrote:
> This patchset adds support for GPIO interrupt controller of Meson-A1 
> SoC
> which use new register layout, two main things are done in the patchset
> 1. rework current driver
> 2. add a1 support
> 
> changes since v1 at [0]
>  - place initial macro after the definition of param structure
>  - make common data as parameter of initial macro
>  - add dummy init function for previous chips
> 
> [0]https://lore.kernel.org/linux-amlogic/20191206121714.14579-1-qianggui.song@amlogic.com
> 
> Qianggui Song (4):
>   dt-bindings: interrupt-controller: New binding for Meson-A1 SoCs
>   irqchip/meson-gpio: rework meson irqchip driver to support meson-A1
>     SoCs
>   irqchip/meson-gpio: Add support for meson a1 SoCs
>   arm64: dts: meson: a1: add gpio interrupt controller support
> 
>  .../amlogic,meson-gpio-intc.txt               |   1 +
>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi     |   9 ++
>  drivers/irqchip/irq-meson-gpio.c              | 137 ++++++++++++++----
>  3 files changed, 122 insertions(+), 25 deletions(-)

I've queued the first 3 patches. The last one can go taken via arm-soc.

Thanks,

         M.
-- 
Jazz is not dead. It just smells funny...

[tip: irq/core] irqchip/meson-gpio: Rework meson irqchip driver to support meson-A1 SoCs

[tip-bot2 for Qianggui Song]

The following commit has been merged into the irq/core branch of tip:

Commit-ID:     e2514165f36edac382a95474a73ba2bfa51bc2b2
Gitweb:        https://git.kernel.org/tip/e2514165f36edac382a95474a73ba2bfa51bc2b2
Author:        Qianggui Song <qianggui.song@amlogic.com>
AuthorDate:    Mon, 16 Dec 2019 20:36:43 +08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Mon, 20 Jan 2020 19:10:05 

irqchip/meson-gpio: Rework meson irqchip driver to support meson-A1 SoCs

Since Meson-A1 SoCs register layout of gpio interrupt controller has
difference with previous chips, registers to decide irq line and offset
of trigger method are all changed, the current driver should be modified.

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191216123645.10099-3-qianggui.song@amlogic.com
---
 drivers/irqchip/irq-meson-gpio.c | 95 ++++++++++++++++++++++---------
 1 file changed, 70 insertions(+), 25 deletions(-)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 829084b..5a1a59e 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -30,44 +30,75 @@
  * stuck at 0. Bits 8 to 15 are responsive and have the expected
  * effect.
  */
-#define REG_EDGE_POL_EDGE(x)	BIT(x)
-#define REG_EDGE_POL_LOW(x)	BIT(16 + (x))
-#define REG_BOTH_EDGE(x)	BIT(8 + (x))
-#define REG_EDGE_POL_MASK(x)    (	\
-		REG_EDGE_POL_EDGE(x) |	\
-		REG_EDGE_POL_LOW(x)  |	\
-		REG_BOTH_EDGE(x))
+#define REG_EDGE_POL_EDGE(params, x)	BIT((params)->edge_single_offset + (x))
+#define REG_EDGE_POL_LOW(params, x)	BIT((params)->pol_low_offset + (x))
+#define REG_BOTH_EDGE(params, x)	BIT((params)->edge_both_offset + (x))
+#define REG_EDGE_POL_MASK(params, x)    (	\
+		REG_EDGE_POL_EDGE(params, x) |	\
+		REG_EDGE_POL_LOW(params, x)  |	\
+		REG_BOTH_EDGE(params, x))
 #define REG_PIN_SEL_SHIFT(x)	(((x) % 4) * 8)
 #define REG_FILTER_SEL_SHIFT(x)	((x) * 4)
 
+struct meson_gpio_irq_controller;
+static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				    unsigned int channel, unsigned long hwirq);
+static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl);
+
+struct irq_ctl_ops {
+	void (*gpio_irq_sel_pin)(struct meson_gpio_irq_controller *ctl,
+				 unsigned int channel, unsigned long hwirq);
+	void (*gpio_irq_init)(struct meson_gpio_irq_controller *ctl);
+};
+
 struct meson_gpio_irq_params {
 	unsigned int nr_hwirq;
 	bool support_edge_both;
+	unsigned int edge_both_offset;
+	unsigned int edge_single_offset;
+	unsigned int pol_low_offset;
+	unsigned int pin_sel_mask;
+	struct irq_ctl_ops ops;
 };
 
+#define INIT_MESON_COMMON(irqs, init, sel)			\
+	.nr_hwirq = irqs,					\
+	.ops = {						\
+		.gpio_irq_init = init,				\
+		.gpio_irq_sel_pin = sel,			\
+	},
+
+#define INIT_MESON8_COMMON_DATA(irqs)				\
+	INIT_MESON_COMMON(irqs, meson_gpio_irq_init_dummy,	\
+			  meson8_gpio_irq_sel_pin)		\
+	.edge_single_offset = 0,				\
+	.pol_low_offset = 16,					\
+	.pin_sel_mask = 0xff,					\
+
 static const struct meson_gpio_irq_params meson8_params = {
-	.nr_hwirq = 134,
+	INIT_MESON8_COMMON_DATA(134)
 };
 
 static const struct meson_gpio_irq_params meson8b_params = {
-	.nr_hwirq = 119,
+	INIT_MESON8_COMMON_DATA(119)
 };
 
 static const struct meson_gpio_irq_params gxbb_params = {
-	.nr_hwirq = 133,
+	INIT_MESON8_COMMON_DATA(133)
 };
 
 static const struct meson_gpio_irq_params gxl_params = {
-	.nr_hwirq = 110,
+	INIT_MESON8_COMMON_DATA(110)
 };
 
 static const struct meson_gpio_irq_params axg_params = {
-	.nr_hwirq = 100,
+	INIT_MESON8_COMMON_DATA(100)
 };
 
 static const struct meson_gpio_irq_params sm1_params = {
-	.nr_hwirq = 100,
+	INIT_MESON8_COMMON_DATA(100)
 	.support_edge_both = true,
+	.edge_both_offset = 8,
 };
 
 static const struct of_device_id meson_irq_gpio_matches[] = {
@@ -100,9 +131,22 @@ static void meson_gpio_irq_update_bits(struct meson_gpio_irq_controller *ctl,
 	writel_relaxed(tmp, ctl->base + reg);
 }
 
-static unsigned int meson_gpio_irq_channel_to_reg(unsigned int channel)
+static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl)
 {
-	return (channel < 4) ? REG_PIN_03_SEL : REG_PIN_47_SEL;
+}
+
+static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				    unsigned int channel, unsigned long hwirq)
+{
+	unsigned int reg_offset;
+	unsigned int bit_offset;
+
+	reg_offset = (channel < 4) ? REG_PIN_03_SEL : REG_PIN_47_SEL;
+	bit_offset = REG_PIN_SEL_SHIFT(channel);
+
+	meson_gpio_irq_update_bits(ctl, reg_offset,
+				   ctl->params->pin_sel_mask << bit_offset,
+				   hwirq << bit_offset);
 }
 
 static int
@@ -110,7 +154,7 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 			       unsigned long  hwirq,
 			       u32 **channel_hwirq)
 {
-	unsigned int reg, idx;
+	unsigned int idx;
 
 	spin_lock(&ctl->lock);
 
@@ -129,10 +173,7 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 	 * Setup the mux of the channel to route the signal of the pad
 	 * to the appropriate input of the GIC
 	 */
-	reg = meson_gpio_irq_channel_to_reg(idx);
-	meson_gpio_irq_update_bits(ctl, reg,
-				   0xff << REG_PIN_SEL_SHIFT(idx),
-				   hwirq << REG_PIN_SEL_SHIFT(idx));
+	ctl->params->ops.gpio_irq_sel_pin(ctl, idx, hwirq);
 
 	/*
 	 * Get the hwirq number assigned to this channel through
@@ -173,7 +214,9 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
 {
 	u32 val = 0;
 	unsigned int idx;
+	const struct meson_gpio_irq_params *params;
 
+	params = ctl->params;
 	idx = meson_gpio_irq_get_channel_idx(ctl, channel_hwirq);
 
 	/*
@@ -190,22 +233,22 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
 	 * precedence over the other edge/polarity settings
 	 */
 	if (type == IRQ_TYPE_EDGE_BOTH) {
-		if (!ctl->params->support_edge_both)
+		if (!params->support_edge_both)
 			return -EINVAL;
 
-		val |= REG_BOTH_EDGE(idx);
+		val |= REG_BOTH_EDGE(params, idx);
 	} else {
 		if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
-			val |= REG_EDGE_POL_EDGE(idx);
+			val |= REG_EDGE_POL_EDGE(params, idx);
 
 		if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))
-			val |= REG_EDGE_POL_LOW(idx);
+			val |= REG_EDGE_POL_LOW(params, idx);
 	}
 
 	spin_lock(&ctl->lock);
 
 	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
-				   REG_EDGE_POL_MASK(idx), val);
+				   REG_EDGE_POL_MASK(params, idx), val);
 
 	spin_unlock(&ctl->lock);
 
@@ -371,6 +414,8 @@ static int __init meson_gpio_irq_parse_dt(struct device_node *node,
 		return ret;
 	}
 
+	ctl->params->ops.gpio_irq_init(ctl);
+
 	return 0;
 }
 

[tip: irq/core] dt-bindings: interrupt-controller: New binding for Meson-A1 SoCs

[tip-bot2 for Qianggui Song]

The following commit has been merged into the irq/core branch of tip:

Commit-ID:     fd6765b4c991bb9e4dd6b384b529166db82e5931
Gitweb:        https://git.kernel.org/tip/fd6765b4c991bb9e4dd6b384b529166db82e5931
Author:        Qianggui Song <qianggui.song@amlogic.com>
AuthorDate:    Mon, 16 Dec 2019 20:36:42 +08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Mon, 20 Jan 2020 19:10:05 

dt-bindings: interrupt-controller: New binding for Meson-A1 SoCs

Update dt-binding document for GPIO interrupt controller of Meson-A1 SoCs

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191216123645.10099-2-qianggui.song@amlogic.com
---
 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 684bb1c..23b18b9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -17,6 +17,7 @@ Required properties:
     "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
     "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
     "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
+    "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an

[tip: irq/core] irqchip/meson-gpio: Add support for meson a1 SoCs

[tip-bot2 for Qianggui Song]

The following commit has been merged into the irq/core branch of tip:

Commit-ID:     8f78bd62bdd7a7b0a9906c4827245bf17056f781
Gitweb:        https://git.kernel.org/tip/8f78bd62bdd7a7b0a9906c4827245bf17056f781
Author:        Qianggui Song <qianggui.song@amlogic.com>
AuthorDate:    Mon, 16 Dec 2019 20:36:44 +08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Mon, 20 Jan 2020 19:10:05 

irqchip/meson-gpio: Add support for meson a1 SoCs

The meson a1 Socs have some changes compared with previous
chips. For A113L, it contains 62 pins and can be spied on:

- 62:128 undefined
- 61:50 12 pins on bank A
- 49:37 13 pins on bank F
- 36:20 17 pins on bank X
- 19:13 7  pins on bank B
- 12:0  13 pins on bank P

There are five relative registers for gpio interrupt controller,
details are as below:

- PADCTRL_GPIO_IRQ_CTRL0
  bit[31]:    enable/disable the whole irq lines
  bit[16-23]: both edge trigger
  bit[8-15]:  single edge trigger
  bit[0-7]:   pol trigger

- PADCTRL_GPIO_IRQ_CTRL[X]
  bit[0-6]:   7 bits to choose gpio source for irq line 2*[X] - 2
  bit[16-22]: 7 bits to choose gpio source for irq line 2*[X] - 1
  where X =1,2,3,4

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191216123645.10099-4-qianggui.song@amlogic.com
---
 drivers/irqchip/irq-meson-gpio.c | 42 +++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 5a1a59e..ccc7f82 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -24,6 +24,9 @@
 #define REG_PIN_47_SEL	0x08
 #define REG_FILTER_SEL	0x0c
 
+/* use for A1 like chips */
+#define REG_PIN_A1_SEL	0x04
+
 /*
  * Note: The S905X3 datasheet reports that BOTH_EDGE is controlled by
  * bits 24 to 31. Tests on the actual HW show that these bits are
@@ -44,6 +47,10 @@ struct meson_gpio_irq_controller;
 static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
 				    unsigned int channel, unsigned long hwirq);
 static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl);
+static void meson_a1_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				      unsigned int channel,
+				      unsigned long hwirq);
+static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl);
 
 struct irq_ctl_ops {
 	void (*gpio_irq_sel_pin)(struct meson_gpio_irq_controller *ctl,
@@ -75,6 +82,15 @@ struct meson_gpio_irq_params {
 	.pol_low_offset = 16,					\
 	.pin_sel_mask = 0xff,					\
 
+#define INIT_MESON_A1_COMMON_DATA(irqs)				\
+	INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init,		\
+			  meson_a1_gpio_irq_sel_pin)		\
+	.support_edge_both = true,				\
+	.edge_both_offset = 16,					\
+	.edge_single_offset = 8,				\
+	.pol_low_offset = 0,					\
+	.pin_sel_mask = 0x7f,					\
+
 static const struct meson_gpio_irq_params meson8_params = {
 	INIT_MESON8_COMMON_DATA(134)
 };
@@ -101,6 +117,10 @@ static const struct meson_gpio_irq_params sm1_params = {
 	.edge_both_offset = 8,
 };
 
+static const struct meson_gpio_irq_params a1_params = {
+	INIT_MESON_A1_COMMON_DATA(62)
+};
+
 static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson8-gpio-intc", .data = &meson8_params },
 	{ .compatible = "amlogic,meson8b-gpio-intc", .data = &meson8b_params },
@@ -109,6 +129,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson-axg-gpio-intc", .data = &axg_params },
 	{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
 	{ .compatible = "amlogic,meson-sm1-gpio-intc", .data = &sm1_params },
+	{ .compatible = "amlogic,meson-a1-gpio-intc", .data = &a1_params },
 	{ }
 };
 
@@ -149,6 +170,27 @@ static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
 				   hwirq << bit_offset);
 }
 
+static void meson_a1_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				      unsigned int channel,
+				      unsigned long hwirq)
+{
+	unsigned int reg_offset;
+	unsigned int bit_offset;
+
+	bit_offset = ((channel % 2) == 0) ? 0 : 16;
+	reg_offset = REG_PIN_A1_SEL + ((channel / 2) << 2);
+
+	meson_gpio_irq_update_bits(ctl, reg_offset,
+				   ctl->params->pin_sel_mask << bit_offset,
+				   hwirq << bit_offset);
+}
+
+/* For a1 or later chips like a1 there is a switch to enable/disable irq */
+static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl)
+{
+	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL, BIT(31), BIT(31));
+}
+
 static int
 meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 			       unsigned long  hwirq,