[PATCH v7 0/7] add thermal sensor driver for A64, A83T, H3, H5, H6, R40

From: Vasily Khoruzhick <anarsoul@gmail.com>
To: "Yangtao Li" <tiny.windzz@gmail.com>,
	"Zhang Rui" <rui.zhang@intel.com>,
	"Daniel Lezcano" <daniel.lezcano@linaro.org>,
	"Amit Kucheria" <amit.kucheria@verdurent.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Maxime Ripard" <mripard@kernel.org>,
	"Chen-Yu Tsai" <wens@csie.org>,
	"Mauro Carvalho Chehab" <mchehab+samsung@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Ondřej Jirman" <megous@megous.com>,
	linux-kernel@vger.kernel.org
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Subject: [PATCH v7 0/7] add thermal sensor driver for A64, A83T, H3, H5, H6, R40
Date: Tue, 17 Dec 2019 20:21:14 -0800	[thread overview]
Message-ID: <20191218042121.1471954-1-anarsoul@gmail.com> (raw)

This patchset adds driver for thermal sensor in A64, A83T, H3, H5,
H6 and R40 SoCs.

v7:
	- [vasily] Address Maxime's comments for dt-schema
	- [vasily] Move common part of H3 and H5 dts into sunxi-h3-h5.dtsi
	- [vasily] Add Maxime's a-b to the driver patch 

v6:
	- [ondrej, vasily] Squash all driver related changes into a
			   single patch
	- [ondrej] Rename calib -> calibration
	- [ondrej] Fix thermal zone registration check
	- [ondrej] Lower rate of sensor data interrupts to 4/sec/sensor
	- [ondrej] Rework scale/offset values, H6 calibration
	- [ondrej] Explicitly set mod clock to 24 MHz
	- [ondrej] Set undocumented bits in CTRL0 for H6
	- [ondrej] Add support for A83T
	- [ondrej] Add dts changes for A83T, H3, H5, H6
	- [vasily] Add dts changes for A64
	- [vasily] Address Maxime's comments for YAML scheme
	- [vasily] Make .calc_temp callback mandatory
	- [vasily] Set .max_register in regmap config, so regs can be
		   inspected using debugfs


Ondrej Jirman (4):
  ARM: dts: sun8i-a83t: Add thermal sensor and thermal zones
  ARM: dts: sun8i-h3: Add thermal sensor and thermal zones
  arm64: dts: allwinner: h5: Add thermal sensor and thermal zones
  arm64: dts: allwinner: h6: Add thermal sensor and thermal zones

Vasily Khoruzhick (1):
  arm64: dts: allwinner: a64: Add thermal sensors and thermal zones

Yangtao Li (2):
  thermal: sun8i: add thermal driver for H6/H5/H3/A64/A83T/R40
  dt-bindings: thermal: add YAML schema for sun8i-thermal driver
    bindings

 .../thermal/allwinner,sun8i-a83t-ths.yaml     | 146 ++++
 MAINTAINERS                                   |   7 +
 arch/arm/boot/dts/sun8i-a83t.dtsi             |  36 +
 arch/arm/boot/dts/sun8i-h3.dtsi               |  20 +
 arch/arm/boot/dts/sunxi-h3-h5.dtsi            |   6 +
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi |  42 ++
 arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi  |  26 +
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |  33 +
 drivers/thermal/Kconfig                       |  14 +
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/sun8i_thermal.c               | 639 ++++++++++++++++++
 11 files changed, 970 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
 create mode 100644 drivers/thermal/sun8i_thermal.c

-- 
2.24.1