From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.8 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C8563C2D0CD for ; Wed, 18 Dec 2019 14:25:09 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 8B2AB218AC for ; Wed, 18 Dec 2019 14:25:09 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=st.com header.i=@st.com header.b="xBns3Jrx" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727265AbfLROZI (ORCPT ); Wed, 18 Dec 2019 09:25:08 -0500 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:41232 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727035AbfLROZI (ORCPT ); Wed, 18 Dec 2019 09:25:08 -0500 Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx08-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id xBIEOC0R003764; Wed, 18 Dec 2019 15:25:01 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : mime-version : content-type; s=STMicroelectronics; bh=KTCzOHykC73RWxKWR21ZpT9NrGcSEJvdlnUUNGMFyOE=; b=xBns3JrxeXz14AfH/zTb0Y6TN/WHQPCOcscUcYjLqS7J6NQQI25CHIMzRUdXm13YwLOI ho9cYFI8xqqP1eh7FJfBe64CSI0Lo68StyUGluIkAuLqlUNzYbvtLnipdjo2OYiRFRFU mSZMQIbQW+KFg2SLL2tpBSz7AuctCtl1dbCNY7dJTVnETte9APPcDDU5KtqnN6l3J9lb YiXN8bb4Mm2+v2VH+RG12o4DrJolxYNTSjzHz00wb588kHyn4vnVxk56kQyPD4dwcjPm CX3lKvC27skDAsRWjFCilCef+9jD9vH2wF75iwIgJ3fntPCb9IZ1vtXSNGJjEicQZBeS gQ== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx08-00178001.pphosted.com with ESMTP id 2wvqgpvj0y-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 18 Dec 2019 15:25:01 +0100 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 96E7F100038; Wed, 18 Dec 2019 15:24:57 +0100 (CET) Received: from Webmail-eu.st.com (sfhdag3node3.st.com [10.75.127.9]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 86A962BE242; Wed, 18 Dec 2019 15:24:57 +0100 (CET) Received: from localhost (10.75.127.48) by SFHDAG3NODE3.st.com (10.75.127.9) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Wed, 18 Dec 2019 15:24:56 +0100 From: Benjamin Gaignard To: , , CC: , , , Benjamin Gaignard Subject: [PATCH] dt-bindings: usb: Convert DWC2 bindings to json-schema Date: Wed, 18 Dec 2019 15:24:55 +0100 Message-ID: <20191218142455.13542-1-benjamin.gaignard@st.com> X-Mailer: git-send-email 2.15.0 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.75.127.48] X-ClientProxiedBy: SFHDAG4NODE3.st.com (10.75.127.12) To SFHDAG3NODE3.st.com (10.75.127.9) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.95,18.0.572 definitions=2019-12-18_04:2019-12-17,2019-12-18 signatures=0 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Convert DWC2 bindings to DT schema format using json-schema. DWC2 is widely use but a couple of compatibles and properties (vusb_d-supply,vusb_a-supply) were missing in dwc2.txt, the patch add them. Signed-off-by: Benjamin Gaignard --- Notes: I have put Greg Kroah-Hartman has maintainer of this file because it was the first entry when calling get_maintainers.pl on dwc2.txt. All my apologies if that is an incorrect guess, raise your hands if you know who should be the maintainer(s) for this file. Documentation/devicetree/bindings/usb/dwc2.txt | 64 --------- Documentation/devicetree/bindings/usb/dwc2.yaml | 178 ++++++++++++++++++++++++ 2 files changed, 178 insertions(+), 64 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/dwc2.txt create mode 100644 Documentation/devicetree/bindings/usb/dwc2.yaml diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt deleted file mode 100644 index aafff3a6904d..000000000000 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ /dev/null @@ -1,64 +0,0 @@ -Platform DesignWare HS OTG USB 2.0 controller ------------------------------------------------------ - -Required properties: -- compatible : One of: - - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. - - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC. - - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; - - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc; - - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; - - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; - - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs; - - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs; - - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs; - - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs; - - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs; - - "amlogic,meson-g12a-usb": The DWC2 USB controller instance in Amlogic G12A SoCs; - - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs; - - snps,dwc2: A generic DWC2 USB controller with default parameters. - - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs - configured in FS mode; - - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs - configured in HS mode; - - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs - configured in HS mode; -- reg : Should contain 1 register range (address and length) -- interrupts : Should contain 1 interrupt -- clocks: clock provider specifier -- clock-names: shall be "otg" -Refer to clk/clock-bindings.txt for generic clock consumer properties - -Optional properties: -- phys: phy provider specifier -- phy-names: shall be "usb2-phy" -- vbus-supply: reference to the VBUS regulator. Depending on the current mode - this is enabled (in "host" mode") or disabled (in "peripheral" mode). The - regulator is updated if the controller is configured in "otg" mode and the - status changes between "host" and "peripheral". -Refer to phy/phy-bindings.txt for generic phy consumer properties -- dr_mode: shall be one of "host", "peripheral" and "otg" - Refer to usb/generic.txt -- g-rx-fifo-size: size of rx fifo size in gadget mode. -- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. -- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. -- snps,need-phy-for-wake: If present indicates that the phy needs to be left - on for remote wakeup during suspend. -- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when - we detect a wakeup. This is due to a hardware errata. - -Deprecated properties: -- g-use-dma: gadget DMA mode is automatically detected - -Example: - - usb@101c0000 { - compatible = "ralink,rt3050-usb, snps,dwc2"; - reg = <0x101c0000 40000>; - interrupts = <18>; - clocks = <&usb_otg_ahb_clk>; - clock-names = "otg"; - phys = <&usbphy>; - phy-names = "usb2-phy"; - snps,need-phy-for-wake; - }; diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml new file mode 100644 index 000000000000..2c11626e3bc3 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/dwc2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DesignWare HS OTG USB 2.0 controller Bindings + +maintainers: + - Greg Kroah-Hartman + +properties: + compatible: + oneOf: + - const: brcm,bcm2835-usb + description: The DWC2 USB controller instance in the BCM2835 SoC + - const: hisilicon,hi6220-usb + description: The DWC2 USB controller instance in the hi6220 SoC + - items: + - const: rockchip,rk3066-usb + - const: snps,dwc2 + description: The DWC2 USB controller instance in the rk3066 Soc + - items: + - const: rockchip,px30-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + description: The DWC2 USB controller instance in the px30 Soc + - items: + - const: rockchip,rk3036-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + description: The DWC2 USB controller instance in the rk3036 Soc + - items: + - const: rockchip,rv1108-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + description: The DWC2 USB controller instance in the rv1108 Soc + - items: + - const: rockchip,rk3188-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + description: The DWC2 USB controller instance in the rk3188 Soc + - items: + - const: rockchip,rk3228-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + description: The DWC2 USB controller instance in the rk3228 Soc + - items: + - const: rockchip,rk3288-usb + - const: rockchip,rk3066-usb + - const: snps,dwc2 + description: The DWC2 USB controller instance in the rk3288 Soc + - const: lantiq,arx100-usb + description: The DWC2 USB controller instance in Lantiq ARX SoCs + - const: lantiq,xrx200-usb + description: The DWC2 USB controller instance in Lantiq XRX SoCs + - items: + - const: amlogic,meson8-usb + - const: snps,dwc2 + description: The DWC2 USB controller instance in Amlogic Meson8 SoCs + - items: + - const: amlogic,meson8b-usb + - const: snps,dwc2 + description: The DWC2 USB controller instance in Amlogic Meson8b SoCs + - const: amlogic,meson-gxbb-usb + description: The DWC2 USB controller instance in Amlogic S905 SoCs + - items: + - const: amlogic,meson-g12a-usb + - const: snps,dwc2 + description: The DWC2 USB controller instance in Amlogic G12A SoCs + - const: amcc,dwc-otg + description: The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs + - const: snps,dwc2 + description: generic DWC2 USB controller with default parameters + - const: st,stm32f4x9-fsotg + description: The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs configured in FS mode + - const: st,stm32f4x9-hsotg + description: The DWC2 USB HS controller instance in STM32F4x9 SoCs configured in HS mode + - const: st,stm32f7-hsotg + description: The DWC2 USB HS controller instance in STM32F7 SoCs configured in HS mode + - items: + - const: samsung,s3c6400-hsotg + - const: snps,dwc2 + minItems: 1 + description: The DWC2 USB controller instance in the exynos3250 Soc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: otg + + resets: + items: + - description: common reset + - description: ecc reset + minItems: 1 + + reset-names: + items: + - const: dwc2 + - const: dwc2-ecc + minItems: 1 + + phys: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: phy provider specifier + maxItems: 1 + + phy-names: + const: usb2-phy + + vbus-supply: + description: reference to the VBUS regulator. Depending on the current mode + this is enabled (in "host" mode") or disabled (in "peripheral" mode). The + regulator is updated if the controller is configured in "otg" mode and the + status changes between "host" and "peripheral". + + vusb_d-supply: + description: phandle to voltage regulator of digital section, + + vusb_a-supply: + description: phandle to voltage regulator of analog section. + + dr_mode: + enum: [host, peripheral, otg] + + g-rx-fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: size of rx fifo size in gadget mode. + + g-np-tx-fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: size of non-periodic tx fifo size in gadget mode. + + g-tx-fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: size of periodic tx fifo per endpoint (except ep0) in gadget mode. + + snps,need-phy-for-wake: + $ref: /schemas/types.yaml#/definitions/flag + description: If present indicates that the phy needs to be left on for remote wakeup during suspend. + + snps,reset-phy-on-wake: + $ref: /schemas/types.yaml#/definitions/flag + description: If present indicates that we need to reset the PHY when we detect a wakeup. + This is due to a hardware errata. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + usb@101c0000 { + compatible = "ralink,rt3050-usb, snps,dwc2"; + reg = <0x101c0000 40000>; + interrupts = <18>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + snps,need-phy-for-wake; + }; + +... -- 2.15.0