linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Peter Zijlstra <peterz@infradead.org>,
	Linux PM <linux-pm@vger.kernel.org>,
	Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
	Paul McKenney <paulmck@linux.vnet.ibm.com>,
	Thomas Ilsche <thomas.ilsche@tu-dresden.de>,
	Doug Smythies <dsmythies@telus.net>,
	Rik van Riel <riel@surriel.com>,
	Aubrey Li <aubrey.li@linux.intel.com>,
	Mike Galbraith <mgalbraith@suse.de>,
	LKML <linux-kernel@vger.kernel.org>
Subject: [RFT][PATCH v4 1/7] time: tick-sched: Reorganize idle tick management code
Date: Mon, 12 Mar 2018 10:47:41 +0100	[thread overview]
Message-ID: <2019498.YXfJVQUTuX@aspire.rjw.lan> (raw)
In-Reply-To: <2352117.3UUoYAu18A@aspire.rjw.lan>

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Prepare the scheduler tick code for reworking the idle loop to
avoid stopping the tick in some cases.

Move away the tick_nohz_start_idle() invocation from
__tick_nohz_idle_enter(), rename the latter to
__tick_nohz_idle_stop_tick() and define tick_nohz_idle_stop_tick()
as a wrapper around it for calling it from the outside.

Make tick_nohz_idle_enter() only call tick_nohz_start_idle() instead
of calling the entire __tick_nohz_idle_enter(), add another wrapper
disabling and enabling interrupts around tick_nohz_idle_stop_tick()
and make the current callers of tick_nohz_idle_enter() call it too
to retain their current functionality.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 arch/x86/xen/smp_pv.c    |    1 +
 include/linux/tick.h     |    9 +++++++++
 kernel/sched/idle.c      |    1 +
 kernel/time/tick-sched.c |   46 +++++++++++++++++++++++++---------------------
 4 files changed, 36 insertions(+), 21 deletions(-)

Index: linux-pm/include/linux/tick.h
===================================================================
--- linux-pm.orig/include/linux/tick.h
+++ linux-pm/include/linux/tick.h
@@ -114,6 +114,7 @@ enum tick_dep_bits {
 #ifdef CONFIG_NO_HZ_COMMON
 extern bool tick_nohz_enabled;
 extern int tick_nohz_tick_stopped(void);
+extern void tick_nohz_idle_stop_tick(void);
 extern void tick_nohz_idle_enter(void);
 extern void tick_nohz_idle_exit(void);
 extern void tick_nohz_irq_exit(void);
@@ -125,6 +126,7 @@ extern u64 get_cpu_iowait_time_us(int cp
 #else /* !CONFIG_NO_HZ_COMMON */
 #define tick_nohz_enabled (0)
 static inline int tick_nohz_tick_stopped(void) { return 0; }
+static inline void tick_nohz_idle_stop_tick(void) { }
 static inline void tick_nohz_idle_enter(void) { }
 static inline void tick_nohz_idle_exit(void) { }
 
@@ -136,6 +138,13 @@ static inline u64 get_cpu_idle_time_us(i
 static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; }
 #endif /* !CONFIG_NO_HZ_COMMON */
 
+static inline void tick_nohz_idle_stop_tick_protected(void)
+{
+	local_irq_disable();
+	tick_nohz_idle_stop_tick();
+	local_irq_enable();
+}
+
 #ifdef CONFIG_NO_HZ_FULL
 extern bool tick_nohz_full_running;
 extern cpumask_var_t tick_nohz_full_mask;
Index: linux-pm/kernel/time/tick-sched.c
===================================================================
--- linux-pm.orig/kernel/time/tick-sched.c
+++ linux-pm/kernel/time/tick-sched.c
@@ -539,14 +539,11 @@ static void tick_nohz_stop_idle(struct t
 	sched_clock_idle_wakeup_event();
 }
 
-static ktime_t tick_nohz_start_idle(struct tick_sched *ts)
+static void tick_nohz_start_idle(struct tick_sched *ts)
 {
-	ktime_t now = ktime_get();
-
-	ts->idle_entrytime = now;
+	ts->idle_entrytime = ktime_get();
 	ts->idle_active = 1;
 	sched_clock_idle_sleep_event();
-	return now;
 }
 
 /**
@@ -911,19 +908,21 @@ static bool can_stop_idle_tick(int cpu,
 	return true;
 }
 
-static void __tick_nohz_idle_enter(struct tick_sched *ts)
+static void __tick_nohz_idle_stop_tick(struct tick_sched *ts)
 {
-	ktime_t now, expires;
+	ktime_t expires;
 	int cpu = smp_processor_id();
 
-	now = tick_nohz_start_idle(ts);
-
 	if (can_stop_idle_tick(cpu, ts)) {
 		int was_stopped = ts->tick_stopped;
 
 		ts->idle_calls++;
 
-		expires = tick_nohz_stop_sched_tick(ts, now, cpu);
+		/*
+		 * The idle entry time should be a sufficient approximation of
+		 * the current time at this point.
+		 */
+		expires = tick_nohz_stop_sched_tick(ts, ts->idle_entrytime, cpu);
 		if (expires > 0LL) {
 			ts->idle_sleeps++;
 			ts->idle_expires = expires;
@@ -937,16 +936,19 @@ static void __tick_nohz_idle_enter(struc
 }
 
 /**
- * tick_nohz_idle_enter - stop the idle tick from the idle task
+ * tick_nohz_idle_stop_tick - stop the idle tick from the idle task
  *
  * When the next event is more than a tick into the future, stop the idle tick
- * Called when we start the idle loop.
- *
- * The arch is responsible of calling:
+ */
+void tick_nohz_idle_stop_tick(void)
+{
+	__tick_nohz_idle_stop_tick(this_cpu_ptr(&tick_cpu_sched));
+}
+
+/**
+ * tick_nohz_idle_enter - prepare for entering idle on the current CPU
  *
- * - rcu_idle_enter() after its last use of RCU before the CPU is put
- *  to sleep.
- * - rcu_idle_exit() before the first use of RCU after the CPU is woken up.
+ * Called when we start the idle loop.
  */
 void tick_nohz_idle_enter(void)
 {
@@ -965,7 +967,7 @@ void tick_nohz_idle_enter(void)
 
 	ts = this_cpu_ptr(&tick_cpu_sched);
 	ts->inidle = 1;
-	__tick_nohz_idle_enter(ts);
+	tick_nohz_start_idle(ts);
 
 	local_irq_enable();
 }
@@ -982,10 +984,12 @@ void tick_nohz_irq_exit(void)
 {
 	struct tick_sched *ts = this_cpu_ptr(&tick_cpu_sched);
 
-	if (ts->inidle)
-		__tick_nohz_idle_enter(ts);
-	else
+	if (ts->inidle) {
+		tick_nohz_start_idle(ts);
+		__tick_nohz_idle_stop_tick(ts);
+	} else {
 		tick_nohz_full_update_tick(ts);
+	}
 }
 
 /**
Index: linux-pm/arch/x86/xen/smp_pv.c
===================================================================
--- linux-pm.orig/arch/x86/xen/smp_pv.c
+++ linux-pm/arch/x86/xen/smp_pv.c
@@ -425,6 +425,7 @@ static void xen_pv_play_dead(void) /* us
 	 * data back is to call:
 	 */
 	tick_nohz_idle_enter();
+	tick_nohz_idle_stop_tick_protected();
 
 	cpuhp_online_idle(CPUHP_AP_ONLINE_IDLE);
 }
Index: linux-pm/kernel/sched/idle.c
===================================================================
--- linux-pm.orig/kernel/sched/idle.c
+++ linux-pm/kernel/sched/idle.c
@@ -221,6 +221,7 @@ static void do_idle(void)
 
 	__current_set_polling();
 	tick_nohz_idle_enter();
+	tick_nohz_idle_stop_tick_protected();
 
 	while (!need_resched()) {
 		check_pgt_cache();

  reply	other threads:[~2018-03-12 10:08 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-12  9:46 [RFT][PATCH v4 0/7] sched/cpuidle: Idle loop rework Rafael J. Wysocki
2018-03-12  9:47 ` Rafael J. Wysocki [this message]
2018-03-14 15:49   ` [RFT][PATCH v4 1/7] time: tick-sched: Reorganize idle tick management code Frederic Weisbecker
2018-03-14 17:20     ` Peter Zijlstra
2018-03-15 17:26       ` Frederic Weisbecker
2018-03-15 12:33     ` Rafael J. Wysocki
2018-03-12  9:51 ` [RFT][PATCH v4 2/7] sched: idle: Do not stop the tick upfront in the idle loop Rafael J. Wysocki
2018-03-15 16:10   ` Frederic Weisbecker
2018-03-15 16:50     ` Rafael J. Wysocki
2018-03-12  9:53 ` [RFT][PATCH v4 3/7] sched: idle: Do not stop the tick before cpuidle_idle_call() Rafael J. Wysocki
2018-03-15 18:19   ` Frederic Weisbecker
2018-03-15 20:41     ` Rafael J. Wysocki
2018-03-15 21:12       ` Rafael J. Wysocki
2018-03-16 14:17         ` Frederic Weisbecker
2018-03-16 14:16       ` Frederic Weisbecker
2018-03-12  9:54 ` [RFT][PATCH v4 4/7] cpuidle: Return nohz hint from cpuidle_select() Rafael J. Wysocki
2018-03-14 12:59   ` Peter Zijlstra
2018-03-15 12:54     ` Rafael J. Wysocki
2018-03-12 10:04 ` [RFT][PATCH v4 5/7] sched: idle: Select idle state before stopping the tick Rafael J. Wysocki
2018-03-12 10:05 ` [RFT][PATCH v4 6/7] cpuidle: menu: Refine idle state selection for running tick Rafael J. Wysocki
2018-03-12 10:07 ` [RFT][PATCH v4 7/7] cpuidle: menu: Avoid selecting shallow states with stopped tick Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2019498.YXfJVQUTuX@aspire.rjw.lan \
    --to=rjw@rjwysocki.net \
    --cc=aubrey.li@linux.intel.com \
    --cc=dsmythies@telus.net \
    --cc=fweisbec@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mgalbraith@suse.de \
    --cc=paulmck@linux.vnet.ibm.com \
    --cc=peterz@infradead.org \
    --cc=riel@surriel.com \
    --cc=tglx@linutronix.de \
    --cc=thomas.ilsche@tu-dresden.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).