linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Kent Gibson <warthog618@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: Re: [PATCH v4 09/13] gpiolib: rework the locking mechanism for lineevent kfifo
Date: Wed, 8 Jan 2020 13:06:39 +0200	[thread overview]
Message-ID: <20200108110639.GL32742@smile.fi.intel.com> (raw)
In-Reply-To: <20191224120709.18247-10-brgl@bgdev.pl>

On Tue, Dec 24, 2019 at 01:07:05PM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> The read_lock mutex is supposed to prevent collisions between reading
> and writing to the line event kfifo but it's actually only taken when
> the events are being read from it.
> 
> Drop the mutex entirely and reuse the spinlock made available to us in
> the waitqueue struct. Take the lock whenever the fifo is modified or
> inspected. Drop the call to kfifo_to_user() and instead first extract
> the new element from kfifo when the lock is taken and only then pass
> it on to the user after the spinlock is released.

Sounds like a plausible approach.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  drivers/gpio/gpiolib.c | 64 +++++++++++++++++++++++-------------------
>  1 file changed, 35 insertions(+), 29 deletions(-)
> 
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index 81d5eda4de7d..a859c0813e0d 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -788,8 +788,6 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
>   * @irq: the interrupt that trigger in response to events on this GPIO
>   * @wait: wait queue that handles blocking reads of events
>   * @events: KFIFO for the GPIO events
> - * @read_lock: mutex lock to protect reads from colliding with adding
> - * new events to the FIFO
>   * @timestamp: cache for the timestamp storing it between hardirq
>   * and IRQ thread, used to bring the timestamp close to the actual
>   * event
> @@ -802,7 +800,6 @@ struct lineevent_state {
>  	int irq;
>  	wait_queue_head_t wait;
>  	DECLARE_KFIFO(events, struct gpioevent_data, 16);
> -	struct mutex read_lock;
>  	u64 timestamp;
>  };
>  
> @@ -818,7 +815,7 @@ static __poll_t lineevent_poll(struct file *filep,
>  
>  	poll_wait(filep, &le->wait, wait);
>  
> -	if (!kfifo_is_empty(&le->events))
> +	if (!kfifo_is_empty_spinlocked_noirqsave(&le->events, &le->wait.lock))
>  		events = EPOLLIN | EPOLLRDNORM;
>  
>  	return events;
> @@ -831,43 +828,52 @@ static ssize_t lineevent_read(struct file *filep,
>  			      loff_t *f_ps)
>  {
>  	struct lineevent_state *le = filep->private_data;
> -	unsigned int copied;
> +	struct gpioevent_data event;
> +	ssize_t bytes_read = 0;
>  	int ret;
>  
> -	if (count < sizeof(struct gpioevent_data))
> +	if (count < sizeof(event))
>  		return -EINVAL;
>  
>  	do {
> +		spin_lock(&le->wait.lock);
>  		if (kfifo_is_empty(&le->events)) {
> -			if (filep->f_flags & O_NONBLOCK)
> +			if (bytes_read) {
> +				spin_unlock(&le->wait.lock);
> +				return bytes_read;
> +			}
> +
> +			if (filep->f_flags & O_NONBLOCK) {
> +				spin_unlock(&le->wait.lock);
>  				return -EAGAIN;
> +			}
>  
> -			ret = wait_event_interruptible(le->wait,
> +			ret = wait_event_interruptible_locked(le->wait,
>  					!kfifo_is_empty(&le->events));
> -			if (ret)
> +			if (ret) {
> +				spin_unlock(&le->wait.lock);
>  				return ret;
> +			}
>  		}
>  
> -		if (mutex_lock_interruptible(&le->read_lock))
> -			return -ERESTARTSYS;
> -		ret = kfifo_to_user(&le->events, buf, count, &copied);
> -		mutex_unlock(&le->read_lock);
> -
> -		if (ret)
> -			return ret;
> -
> -		/*
> -		 * If we couldn't read anything from the fifo (a different
> -		 * thread might have been faster) we either return -EAGAIN if
> -		 * the file descriptor is non-blocking, otherwise we go back to
> -		 * sleep and wait for more data to arrive.
> -		 */
> -		if (copied == 0 && (filep->f_flags & O_NONBLOCK))
> -			return -EAGAIN;
> +		ret = kfifo_out(&le->events, &event, 1);
> +		spin_unlock(&le->wait.lock);
> +		if (ret != 1) {
> +			/*
> +			 * This should never happen - we were holding the lock
> +			 * from the moment we learned the fifo is no longer
> +			 * empty until now.
> +			 */
> +			ret = -EIO;
> +			break;
> +		}
>  
> -	} while (copied == 0);
> +		if (copy_to_user(buf + bytes_read, &event, sizeof(event)))
> +			return -EFAULT;
> +		bytes_read += sizeof(event);
> +	} while (count >= bytes_read + sizeof(event));
>  
> -	return copied;
> +	return bytes_read;
>  }
>  
>  static int lineevent_release(struct inode *inode, struct file *filep)
> @@ -969,7 +975,8 @@ static irqreturn_t lineevent_irq_thread(int irq, void *p)
>  		return IRQ_NONE;
>  	}
>  
> -	ret = kfifo_put(&le->events, ge);
> +	ret = kfifo_in_spinlocked_noirqsave(&le->events, &ge,
> +					    1, &le->wait.lock);
>  	if (ret)
>  		wake_up_poll(&le->wait, EPOLLIN);
>  
> @@ -1084,7 +1091,6 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
>  
>  	INIT_KFIFO(le->events);
>  	init_waitqueue_head(&le->wait);
> -	mutex_init(&le->read_lock);
>  
>  	/* Request a thread to read the events */
>  	ret = request_threaded_irq(le->irq,
> -- 
> 2.23.0
> 

-- 
With Best Regards,
Andy Shevchenko



  reply	other threads:[~2020-01-08 11:06 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-24 12:06 [PATCH v4 00/13] gpiolib: add an ioctl() for monitoring line status changes Bartosz Golaszewski
2019-12-24 12:06 ` [PATCH v4 01/13] gpiolib: use 'unsigned int' instead of 'unsigned' in gpio_set_config() Bartosz Golaszewski
2020-01-07 10:02   ` Linus Walleij
2019-12-24 12:06 ` [PATCH v4 02/13] gpiolib: have a single place of calling set_config() Bartosz Golaszewski
2020-01-07 10:02   ` Linus Walleij
2020-01-20  8:44   ` Geert Uytterhoeven
2020-01-20  9:54     ` Andy Shevchenko
2020-01-23 10:16     ` Bartosz Golaszewski
2020-02-01 19:52   ` Guenter Roeck
2020-02-03 11:04     ` Bartosz Golaszewski
2019-12-24 12:06 ` [PATCH v4 03/13] gpiolib: convert the type of hwnum to unsigned int in gpiochip_get_desc() Bartosz Golaszewski
2020-01-07 10:03   ` Linus Walleij
2019-12-24 12:07 ` [PATCH v4 04/13] gpiolib: use gpiochip_get_desc() in linehandle_create() Bartosz Golaszewski
2020-01-07 10:04   ` Linus Walleij
2019-12-24 12:07 ` [PATCH v4 05/13] gpiolib: use gpiochip_get_desc() in lineevent_create() Bartosz Golaszewski
2020-01-07 10:04   ` Linus Walleij
2019-12-24 12:07 ` [PATCH v4 06/13] gpiolib: use gpiochip_get_desc() in gpio_ioctl() Bartosz Golaszewski
2020-01-07 10:04   ` Linus Walleij
2019-12-24 12:07 ` [PATCH v4 07/13] kfifo: provide noirqsave variants of spinlocked in and out helpers Bartosz Golaszewski
2019-12-24 12:07 ` [PATCH v4 08/13] kfifo: provide kfifo_is_empty_spinlocked() Bartosz Golaszewski
2019-12-24 12:07 ` [PATCH v4 09/13] gpiolib: rework the locking mechanism for lineevent kfifo Bartosz Golaszewski
2020-01-08 11:06   ` Andy Shevchenko [this message]
2019-12-24 12:07 ` [PATCH v4 10/13] gpiolib: emit a debug message when adding events to a full kfifo Bartosz Golaszewski
2019-12-24 12:07 ` [PATCH v4 11/13] gpiolib: provide a dedicated function for setting lineinfo Bartosz Golaszewski
2020-01-08 12:41   ` Andy Shevchenko
2019-12-24 12:07 ` [PATCH v4 12/13] gpiolib: add new ioctl() for monitoring changes in line info Bartosz Golaszewski
2020-01-08 12:46   ` Andy Shevchenko
2020-01-08 16:55     ` Bartosz Golaszewski
2020-06-09  0:23   ` Kent Gibson
2020-06-09  7:58     ` Bartosz Golaszewski
2019-12-24 12:07 ` [PATCH v4 13/13] tools: gpio: implement gpio-watch Bartosz Golaszewski
2020-01-08 12:47   ` Andy Shevchenko
2020-01-07 10:07 ` [PATCH v4 00/13] gpiolib: add an ioctl() for monitoring line status changes Linus Walleij
2020-01-07 10:38   ` Bartosz Golaszewski
2020-01-07 12:50     ` Linus Walleij
2020-01-07 13:15       ` Stefani Seibold
2020-01-07 14:44       ` Andy Shevchenko
2020-01-07 14:45         ` Andy Shevchenko
2020-01-07 15:19           ` Bartosz Golaszewski
2020-01-07 15:58             ` Andy Shevchenko
2020-01-07 16:51               ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200108110639.GL32742@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=brgl@bgdev.pl \
    --cc=gregkh@linuxfoundation.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=warthog618@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).