LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] iommu/vt-d: fix the wrong printing in RHSA parsing
@ 2020-01-15 10:28 Zhenzhong Duan
  0 siblings, 0 replies; only message in thread
From: Zhenzhong Duan @ 2020-01-15 10:28 UTC (permalink / raw)
  To: linux-kernel
  Cc: x86, Zhenzhong Duan, David Woodhouse, Lu Baolu, Joerg Roedel, iommu

When base address in RHSA structure doesn't match base address in
each DRHD structure, the base address in last DRHD is printed out.

This doesn't make sense when there are multiple DRHD units, fix it
by printing the buggy RHSA's base address.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
---
 drivers/iommu/dmar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
index 3acfa6a..78bb03e 100644
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -475,7 +475,7 @@ static int dmar_parse_one_rhsa(struct acpi_dmar_header *header, void *arg)
 		1, TAINT_FIRMWARE_WORKAROUND,
 		"Your BIOS is broken; RHSA refers to non-existent DMAR unit at %llx\n"
 		"BIOS vendor: %s; Ver: %s; Product Version: %s\n",
-		drhd->reg_base_addr,
+		rhsa->base_address,
 		dmi_get_system_info(DMI_BIOS_VENDOR),
 		dmi_get_system_info(DMI_BIOS_VERSION),
 		dmi_get_system_info(DMI_PRODUCT_VERSION));
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-15 10:28 [PATCH] iommu/vt-d: fix the wrong printing in RHSA parsing Zhenzhong Duan

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git