LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Jian Hu <jian.hu@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
	Neil Armstrong <narmstrong@baylibre.com>
Cc: Jian Hu <jian.hu@amlogic.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Rob Herring <robh@kernel.org>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Qiufang Dai <qiufang.dai@amlogic.com>,
	Jianxin Pan <jianxin.pan@amlogic.com>,
	Victor Wan <victor.wan@amlogic.com>,
	Chandle Zou <chandle.zou@amlogic.com>,
	<linux-clk@vger.kernel.org>, <linux-amlogic@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v6 0/5] add Amlogic A1 clock controller driver
Date: Thu, 16 Jan 2020 16:04:35 +0800
Message-ID: <20200116080440.118679-1-jian.hu@amlogic.com> (raw)

add support for Amlogic A1 clock driver, the clock includes 
three parts: peripheral clocks, pll clocks, CPU clocks.
sys pll and CPU clocks will be sent in next patch.

Changes since v5 at [6]:
-fix yaml file
-add rst/current_en/l_detect parm detection
-remove 'meson_eeclkc_data' in a1.c and a1-pll.c

Changes since v4 at [5]:
- change yaml GPL
- drop meson-eeclk.c patch, add probe function in each driver
- add CLK_IS_CRITICAL for sys_clk clock, drop the flag for sys_a and sys_b
- add new parm for pll, add protection for rst parm
- drop flag for a1_fixed_pll
- remove the same comment for fclk_div, add "refer to"
- add critical flag for a1_sys_clk
- remove rtc table
- rename a1_dspa_en_dspa and a1_dspb_en_dspb
- remove useless comment

Changes since v3 at [3]:
-fix reparenting orphan failed, it depends on jerome's patch [4]
-fix changelist in v3 about reparenting orphan
-remove the dts patch 

Changes since v2 at [2]:
-add probe function for A1
-seperate the clock driver into two patch
-change some clock flags and ops
-add support for a1 PLL ops
-add A1 clock node
-fix reparenting orphan clock failed, registering xtal_fixpll
 and xtal_hifipll after the provider registration, it is not
 a best way.

Changes since v1 at [1]:
-place A1 config alphabetically
-add actual reason for RO ops, CLK_IS_CRITICAL, CLK_IGNORE_UNUSED
-separate the driver into two driver: peripheral and pll driver
-delete CLK_IGNORE_UNUSED flag for pwm b/c/d/e/f clock, dsp clock
-delete the change in Kconfig.platforms, address to Kevin alone
-remove the useless comments
-modify the meson pll driver to support A1 PLLs

[1] https://lkml.kernel.org/r/1569411888-98116-1-git-send-email-jian.hu@amlogic.com
[2] https://lkml.kernel.org/r/1571382865-41978-1-git-send-email-jian.hu@amlogic.com
[3] https://lkml.kernel.org/r/20191129144605.182774-1-jian.hu@amlogic.com
[4] https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.com
[5] https://lkml.kernel.org/r/20191206074052.15557-1-jian.hu@amlogic.com
[6] https://lkml.kernel.org/r/20191227094606.143637-1-jian.hu@amlogic.com

Jian Hu (5):
  dt-bindings: clock: meson: add A1 PLL clock controller bindings
  clk: meson: add support for A1 PLL clock ops
  clk: meson: a1: add support for Amlogic A1 PLL clock driver
  dt-bindings: clock: meson: add A1 peripheral clock controller bindings
  clk: meson: a1: add support for Amlogic A1 Peripheral clock driver

 .../bindings/clock/amlogic,a1-clkc.yaml       |   64 +
 .../bindings/clock/amlogic,a1-pll-clkc.yaml   |   54 +
 drivers/clk/meson/Kconfig                     |   18 +
 drivers/clk/meson/Makefile                    |    2 +
 drivers/clk/meson/a1-pll.c                    |  360 +++
 drivers/clk/meson/a1-pll.h                    |   56 +
 drivers/clk/meson/a1.c                        | 2249 +++++++++++++++++
 drivers/clk/meson/a1.h                        |  120 +
 drivers/clk/meson/clk-pll.c                   |   47 +-
 drivers/clk/meson/clk-pll.h                   |    2 +
 include/dt-bindings/clock/a1-clkc.h           |   98 +
 include/dt-bindings/clock/a1-pll-clkc.h       |   16 +
 12 files changed, 3079 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
 create mode 100644 drivers/clk/meson/a1-pll.c
 create mode 100644 drivers/clk/meson/a1-pll.h
 create mode 100644 drivers/clk/meson/a1.c
 create mode 100644 drivers/clk/meson/a1.h
 create mode 100644 include/dt-bindings/clock/a1-clkc.h
 create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h

-- 
2.24.0


             reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-16  8:04 Jian Hu [this message]
2020-01-16  8:04 ` [PATCH v6 1/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings Jian Hu
2020-01-16 20:48   ` Rob Herring
2020-01-17 12:16     ` Jian Hu
2020-01-16  8:04 ` [PATCH v6 2/5] clk: meson: add support for A1 PLL clock ops Jian Hu
2020-01-18 21:57   ` Martin Blumenstingl
2020-01-16  8:04 ` [PATCH v6 3/5] clk: meson: a1: add support for Amlogic A1 PLL clock driver Jian Hu
2020-01-16  8:04 ` [PATCH v6 4/5] dt-bindings: clock: meson: add A1 peripheral clock controller bindings Jian Hu
2020-01-16  8:04 ` [PATCH v6 5/5] clk: meson: a1: add support for Amlogic A1 Peripheral clock driver Jian Hu
2020-01-29  5:42   ` Stephen Boyd
2020-02-03  9:04     ` Jian Hu

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200116080440.118679-1-jian.hu@amlogic.com \
    --to=jian.hu@amlogic.com \
    --cc=chandle.zou@amlogic.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=jianxin.pan@amlogic.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mturquette@baylibre.com \
    --cc=narmstrong@baylibre.com \
    --cc=qiufang.dai@amlogic.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=victor.wan@amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git