From: Gilad Ben-Yossef <gilad@benyossef.com>
To: Herbert Xu <herbert@gondor.apana.org.au>,
"David S. Miller" <davem@davemloft.net>
Cc: Ofir Drang <ofir.drang@arm.com>, Hadar Gat <hadar.gat@arm.com>,
stable@kernel.org, linux-crypto@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 08/11] crypto: ccree - fix PM race condition
Date: Thu, 16 Jan 2020 12:14:43 +0200 [thread overview]
Message-ID: <20200116101447.20374-9-gilad@benyossef.com> (raw)
In-Reply-To: <20200116101447.20374-1-gilad@benyossef.com>
The PM code was racy, possibly causing the driver to submit
requests to a powered down device. Fix the race and while
at it simplify the PM code.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: 1358c13a48c4 ("crypto: ccree - fix resume race condition on init")
Cc: stable@kernel.org # v4.20
---
drivers/crypto/ccree/cc_driver.h | 1 +
drivers/crypto/ccree/cc_pm.c | 28 ++++-----------
drivers/crypto/ccree/cc_request_mgr.c | 50 ---------------------------
drivers/crypto/ccree/cc_request_mgr.h | 8 -----
4 files changed, 7 insertions(+), 80 deletions(-)
diff --git a/drivers/crypto/ccree/cc_driver.h b/drivers/crypto/ccree/cc_driver.h
index 7b6b5d6f1b33..9d77cfdb10d9 100644
--- a/drivers/crypto/ccree/cc_driver.h
+++ b/drivers/crypto/ccree/cc_driver.h
@@ -160,6 +160,7 @@ struct cc_drvdata {
int std_bodies;
bool sec_disabled;
u32 comp_mask;
+ bool pm_on;
};
struct cc_crypto_alg {
diff --git a/drivers/crypto/ccree/cc_pm.c b/drivers/crypto/ccree/cc_pm.c
index 79c612144310..ee9e9cba2fbb 100644
--- a/drivers/crypto/ccree/cc_pm.c
+++ b/drivers/crypto/ccree/cc_pm.c
@@ -22,14 +22,8 @@ const struct dev_pm_ops ccree_pm = {
int cc_pm_suspend(struct device *dev)
{
struct cc_drvdata *drvdata = dev_get_drvdata(dev);
- int rc;
dev_dbg(dev, "set HOST_POWER_DOWN_EN\n");
- rc = cc_suspend_req_queue(drvdata);
- if (rc) {
- dev_err(dev, "cc_suspend_req_queue (%x)\n", rc);
- return rc;
- }
fini_cc_regs(drvdata);
cc_iowrite(drvdata, CC_REG(HOST_POWER_DOWN_EN), POWER_DOWN_ENABLE);
cc_clk_off(drvdata);
@@ -63,13 +57,6 @@ int cc_pm_resume(struct device *dev)
/* check if tee fips error occurred during power down */
cc_tee_handle_fips_error(drvdata);
- rc = cc_resume_req_queue(drvdata);
- if (rc) {
- dev_err(dev, "cc_resume_req_queue (%x)\n", rc);
- return rc;
- }
-
- /* must be after the queue resuming as it uses the HW queue*/
cc_init_hash_sram(drvdata);
return 0;
@@ -80,10 +67,8 @@ int cc_pm_get(struct device *dev)
int rc = 0;
struct cc_drvdata *drvdata = dev_get_drvdata(dev);
- if (cc_req_queue_suspended(drvdata))
+ if (drvdata->pm_on)
rc = pm_runtime_get_sync(dev);
- else
- pm_runtime_get_noresume(dev);
return (rc == 1 ? 0 : rc);
}
@@ -93,14 +78,11 @@ int cc_pm_put_suspend(struct device *dev)
int rc = 0;
struct cc_drvdata *drvdata = dev_get_drvdata(dev);
- if (!cc_req_queue_suspended(drvdata)) {
+ if (drvdata->pm_on) {
pm_runtime_mark_last_busy(dev);
rc = pm_runtime_put_autosuspend(dev);
- } else {
- /* Something wrong happens*/
- dev_err(dev, "request to suspend already suspended queue");
- rc = -EBUSY;
}
+
return rc;
}
@@ -117,7 +99,7 @@ int cc_pm_init(struct cc_drvdata *drvdata)
/* must be before the enabling to avoid redundant suspending */
pm_runtime_set_autosuspend_delay(dev, CC_SUSPEND_TIMEOUT);
pm_runtime_use_autosuspend(dev);
- /* activate the PM module */
+ /* set us as active - note we won't do PM ops until cc_pm_go()! */
return pm_runtime_set_active(dev);
}
@@ -125,9 +107,11 @@ int cc_pm_init(struct cc_drvdata *drvdata)
void cc_pm_go(struct cc_drvdata *drvdata)
{
pm_runtime_enable(drvdata_to_dev(drvdata));
+ drvdata->pm_on = true;
}
void cc_pm_fini(struct cc_drvdata *drvdata)
{
pm_runtime_disable(drvdata_to_dev(drvdata));
+ drvdata->pm_on = false;
}
diff --git a/drivers/crypto/ccree/cc_request_mgr.c b/drivers/crypto/ccree/cc_request_mgr.c
index ce09c430c8b9..9d61e6f12478 100644
--- a/drivers/crypto/ccree/cc_request_mgr.c
+++ b/drivers/crypto/ccree/cc_request_mgr.c
@@ -41,7 +41,6 @@ struct cc_req_mgr_handle {
#else
struct tasklet_struct comptask;
#endif
- bool is_runtime_suspended;
};
struct cc_bl_item {
@@ -664,52 +663,3 @@ static void comp_handler(unsigned long devarg)
cc_proc_backlog(drvdata);
dev_dbg(dev, "Comp. handler done.\n");
}
-
-/*
- * resume the queue configuration - no need to take the lock as this happens
- * inside the spin lock protection
- */
-#if defined(CONFIG_PM)
-int cc_resume_req_queue(struct cc_drvdata *drvdata)
-{
- struct cc_req_mgr_handle *request_mgr_handle =
- drvdata->request_mgr_handle;
-
- spin_lock_bh(&request_mgr_handle->hw_lock);
- request_mgr_handle->is_runtime_suspended = false;
- spin_unlock_bh(&request_mgr_handle->hw_lock);
-
- return 0;
-}
-
-/*
- * suspend the queue configuration. Since it is used for the runtime suspend
- * only verify that the queue can be suspended.
- */
-int cc_suspend_req_queue(struct cc_drvdata *drvdata)
-{
- struct cc_req_mgr_handle *request_mgr_handle =
- drvdata->request_mgr_handle;
-
- /* lock the send_request */
- spin_lock_bh(&request_mgr_handle->hw_lock);
- if (request_mgr_handle->req_queue_head !=
- request_mgr_handle->req_queue_tail) {
- spin_unlock_bh(&request_mgr_handle->hw_lock);
- return -EBUSY;
- }
- request_mgr_handle->is_runtime_suspended = true;
- spin_unlock_bh(&request_mgr_handle->hw_lock);
-
- return 0;
-}
-
-bool cc_req_queue_suspended(struct cc_drvdata *drvdata)
-{
- struct cc_req_mgr_handle *request_mgr_handle =
- drvdata->request_mgr_handle;
-
- return request_mgr_handle->is_runtime_suspended;
-}
-
-#endif
diff --git a/drivers/crypto/ccree/cc_request_mgr.h b/drivers/crypto/ccree/cc_request_mgr.h
index f46cf766fe4d..ff7746aaaf35 100644
--- a/drivers/crypto/ccree/cc_request_mgr.h
+++ b/drivers/crypto/ccree/cc_request_mgr.h
@@ -40,12 +40,4 @@ void complete_request(struct cc_drvdata *drvdata);
void cc_req_mgr_fini(struct cc_drvdata *drvdata);
-#if defined(CONFIG_PM)
-int cc_resume_req_queue(struct cc_drvdata *drvdata);
-
-int cc_suspend_req_queue(struct cc_drvdata *drvdata);
-
-bool cc_req_queue_suspended(struct cc_drvdata *drvdata);
-#endif
-
#endif /*__REQUEST_MGR_H__*/
--
2.23.0
next prev parent reply other threads:[~2020-01-16 10:15 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-16 10:14 [PATCH 00/11] crypto: ccree - fixes and cleanups Gilad Ben-Yossef
2020-01-16 10:14 ` [PATCH 01/11] crypto: ccree: fix typos in error msgs Gilad Ben-Yossef
2020-01-16 10:14 ` [PATCH 02/11] crypto: ccree: fix typo in comment Gilad Ben-Yossef
2020-01-16 10:14 ` [PATCH 03/11] crypto: ccree - fix AEAD decrypt auth fail Gilad Ben-Yossef
2020-01-16 10:14 ` [PATCH 04/11] crypto: ccree - turn errors to debug msgs Gilad Ben-Yossef
2020-01-16 10:14 ` [PATCH 05/11] crypto: ccree - fix pm wrongful error reporting Gilad Ben-Yossef
2020-01-16 10:14 ` [PATCH 06/11] crypto: ccree - cc_do_send_request() is void func Gilad Ben-Yossef
2020-01-16 10:14 ` [PATCH 07/11] crypto: ccree - fix FDE descriptor sequence Gilad Ben-Yossef
2020-01-16 10:14 ` Gilad Ben-Yossef [this message]
2020-01-16 10:14 ` [PATCH 09/11] crypto: ccree - split overloaded usage of irq field Gilad Ben-Yossef
2020-01-16 10:14 ` [PATCH 10/11] crypto: ccree - make cc_pm_put_suspend() void Gilad Ben-Yossef
2020-01-16 10:14 ` [PATCH 11/11] crypto: ccree - erase unneeded inline funcs Gilad Ben-Yossef
2020-01-22 10:13 ` [PATCH 00/11] crypto: ccree - fixes and cleanups Herbert Xu
2020-01-22 16:51 ` Geert Uytterhoeven
2020-01-23 11:44 ` Gilad Ben-Yossef
2020-01-23 15:46 ` Geert Uytterhoeven
2020-01-23 18:18 ` Gilad Ben-Yossef
2020-01-23 20:08 ` Geert Uytterhoeven
2020-01-26 13:37 ` Gilad Ben-Yossef
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200116101447.20374-9-gilad@benyossef.com \
--to=gilad@benyossef.com \
--cc=davem@davemloft.net \
--cc=hadar.gat@arm.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ofir.drang@arm.com \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).