linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v7 0/5] add Amlogic A1 clock controller driver
@ 2020-01-20  3:49 Jian Hu
  2020-01-20  3:49 ` [PATCH v7 1/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings Jian Hu
                   ` (4 more replies)
  0 siblings, 5 replies; 14+ messages in thread
From: Jian Hu @ 2020-01-20  3:49 UTC (permalink / raw)
  To: Jerome Brunet, Neil Armstrong
  Cc: Jian Hu, Kevin Hilman, Rob Herring, Martin Blumenstingl,
	Michael Turquette, Stephen Boyd, Qiufang Dai, Jianxin Pan,
	Victor Wan, Chandle Zou, linux-clk, linux-amlogic,
	linux-arm-kernel, linux-kernel, devicetree

add support for Amlogic A1 clock driver, the clock includes 
three parts: peripheral clocks, pll clocks, CPU clocks.
sys pll and CPU clocks will be sent in next patch.

Changes since v6 at [7]:
-fix 'dt_binding_check' compiling error
-add acked-by

Changes since v5 at [6]:
-fix yaml file
-add rst/current_en/l_detect parm detection
-remove 'meson_eeclkc_data' in a1.c and a1-pll.c

Changes since v4 at [5]:
- change yaml GPL
- drop meson-eeclk.c patch, add probe function in each driver
- add CLK_IS_CRITICAL for sys_clk clock, drop the flag for sys_a and sys_b
- add new parm for pll, add protection for rst parm
- drop flag for a1_fixed_pll
- remove the same comment for fclk_div, add "refer to"
- add critical flag for a1_sys_clk
- remove rtc table
- rename a1_dspa_en_dspa and a1_dspb_en_dspb
- remove useless comment

Changes since v3 at [3]:
-fix reparenting orphan failed, it depends on jerome's patch [4]
-fix changelist in v3 about reparenting orphan
-remove the dts patch 

Changes since v2 at [2]:
-add probe function for A1
-seperate the clock driver into two patch
-change some clock flags and ops
-add support for a1 PLL ops
-add A1 clock node
-fix reparenting orphan clock failed, registering xtal_fixpll
 and xtal_hifipll after the provider registration, it is not
 a best way.

Changes since v1 at [1]:
-place A1 config alphabetically
-add actual reason for RO ops, CLK_IS_CRITICAL, CLK_IGNORE_UNUSED
-separate the driver into two driver: peripheral and pll driver
-delete CLK_IGNORE_UNUSED flag for pwm b/c/d/e/f clock, dsp clock
-delete the change in Kconfig.platforms, address to Kevin alone
-remove the useless comments
-modify the meson pll driver to support A1 PLLs

[1] https://lkml.kernel.org/r/1569411888-98116-1-git-send-email-jian.hu@amlogic.com
[2] https://lkml.kernel.org/r/1571382865-41978-1-git-send-email-jian.hu@amlogic.com
[3] https://lkml.kernel.org/r/20191129144605.182774-1-jian.hu@amlogic.com
[4] https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.com
[5] https://lkml.kernel.org/r/20191206074052.15557-1-jian.hu@amlogic.com
[6] https://lkml.kernel.org/r/20191227094606.143637-1-jian.hu@amlogic.com
[7] https://lkml.kernel.org/r/20200116080440.118679-1-jian.hu@amlogic.com

Jian Hu (5):
  dt-bindings: clock: meson: add A1 PLL clock controller bindings
  clk: meson: add support for A1 PLL clock ops
  clk: meson: a1: add support for Amlogic A1 PLL clock driver
  dt-bindings: clock: meson: add A1 peripheral clock controller bindings
  clk: meson: a1: add support for Amlogic A1 Peripheral clock driver

 .../bindings/clock/amlogic,a1-clkc.yaml       |   65 +
 .../bindings/clock/amlogic,a1-pll-clkc.yaml   |   52 +
 drivers/clk/meson/Kconfig                     |   18 +
 drivers/clk/meson/Makefile                    |    2 +
 drivers/clk/meson/a1-pll.c                    |  360 +++
 drivers/clk/meson/a1-pll.h                    |   56 +
 drivers/clk/meson/a1.c                        | 2249 +++++++++++++++++
 drivers/clk/meson/a1.h                        |  120 +
 drivers/clk/meson/clk-pll.c                   |   47 +-
 drivers/clk/meson/clk-pll.h                   |    2 +
 include/dt-bindings/clock/a1-clkc.h           |   98 +
 include/dt-bindings/clock/a1-pll-clkc.h       |   16 +
 12 files changed, 3078 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
 create mode 100644 drivers/clk/meson/a1-pll.c
 create mode 100644 drivers/clk/meson/a1-pll.h
 create mode 100644 drivers/clk/meson/a1.c
 create mode 100644 drivers/clk/meson/a1.h
 create mode 100644 include/dt-bindings/clock/a1-clkc.h
 create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h

-- 
2.24.0


^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2020-02-18  9:05 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-20  3:49 [PATCH v7 0/5] add Amlogic A1 clock controller driver Jian Hu
2020-01-20  3:49 ` [PATCH v7 1/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings Jian Hu
2020-01-21 22:00   ` Rob Herring
2020-02-04  3:12     ` Jian Hu
2020-01-20  3:49 ` [PATCH v7 2/5] clk: meson: add support for A1 PLL clock ops Jian Hu
2020-02-04 10:24   ` Jerome Brunet
2020-02-10  6:11     ` Jian Hu
2020-02-18  9:05       ` Jerome Brunet
2020-01-20  3:49 ` [PATCH v7 3/5] clk: meson: a1: add support for Amlogic A1 PLL clock driver Jian Hu
2020-02-04 13:13   ` Jerome Brunet
2020-02-10  6:16     ` Jian Hu
2020-01-20  3:49 ` [PATCH v7 4/5] dt-bindings: clock: meson: add A1 peripheral clock controller bindings Jian Hu
2020-01-29  5:44   ` Stephen Boyd
2020-01-20  3:49 ` [PATCH v7 5/5] clk: meson: a1: add support for Amlogic A1 Peripheral clock driver Jian Hu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).