linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: shiva.linuxworks@gmail.com
Cc: Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Boris Brezillon <bbrezillon@kernel.org>,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	Shivamurthy Shastri <sshivamurthy@micron.com>
Subject: Re: [PATCH 3/4] mtd: spinand: Add M70A series Micron SPI NAND devices
Date: Mon, 20 Jan 2020 11:16:26 +0100	[thread overview]
Message-ID: <20200120111626.7cb2f6c5@xps13> (raw)
In-Reply-To: <20200119145432.10405-4-sshivamurthy@micron.com>

Hi Shiva,

This is remark common to the four patches: you miss the 'v2' prefix in
the object.

shiva.linuxworks@gmail.com wrote on Sun, 19 Jan 2020 15:54:31 +0100:

> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add device table for M70A series Micron SPI NAND devices.
> 
> While at it, disable the Continuous Read feature which is enabled by
> default.

Can you please give us more detail on why this is an issue?

Shall we backport it to stable?

As a rule of thumb, when you start a sentence by "while at it" in a
commit message and this is not a trivial change : split the patch,
please. Unless this is really related and in this case explain how and
why in the commit message.

> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> ---
>  drivers/mtd/nand/spi/micron.c | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
> index 5fd1f921ef12..45fc37c58f8a 100644
> --- a/drivers/mtd/nand/spi/micron.c
> +++ b/drivers/mtd/nand/spi/micron.c
> @@ -131,6 +131,26 @@ static const struct spinand_info micron_spinand_table[] = {
>  		     0,
>  		     SPINAND_ECCINFO(&micron_8_ooblayout,
>  				     micron_8_ecc_get_status)),
> +	/* M70A 4Gb 3.3V */
> +	SPINAND_INFO("MT29F4G01ABAFD", 0x34,
> +		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     0,
> +		     SPINAND_ECCINFO(&micron_8_ooblayout,
> +				     micron_8_ecc_get_status)),
> +	/* M70A 4Gb 1.8V */
> +	SPINAND_INFO("MT29F4G01ABBFD", 0x35,
> +		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     0,
> +		     SPINAND_ECCINFO(&micron_8_ooblayout,
> +				     micron_8_ecc_get_status)),
>  };
>  
>  static int micron_spinand_detect(struct spinand_device *spinand)
> @@ -153,8 +173,19 @@ static int micron_spinand_detect(struct spinand_device *spinand)
>  	return 1;
>  }
>  
> +static int micron_spinand_init(struct spinand_device *spinand)
> +{
> +	/*
> +	 * M70A device series enable Continuous Read feature at Power-up,
> +	 * which is not supported. Disable this bit to avoid any possible
> +	 * failure.
> +	 */
> +	return spinand_upd_cfg(spinand, CFG_QUAD_ENABLE, 0);
> +}
> +
>  static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
>  	.detect = micron_spinand_detect,
> +	.init = micron_spinand_init,
>  };
>  
>  const struct spinand_manufacturer micron_spinand_manufacturer = {

Thanks,
Miquèl

  reply	other threads:[~2020-01-20 10:16 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-19 14:54 [PATCH 0/4] Add new series Micron SPI NAND devices shiva.linuxworks
2020-01-19 14:54 ` [PATCH 1/4] mtd: spinand: Generalize the OOB layout structure and function names shiva.linuxworks
2020-01-30  8:30   ` Miquel Raynal
2020-01-19 14:54 ` [PATCH 2/4] mtd: spinand: Add new Micron SPI NAND devices shiva.linuxworks
2020-01-19 14:54 ` [PATCH 3/4] mtd: spinand: Add M70A series " shiva.linuxworks
2020-01-20 10:16   ` Miquel Raynal [this message]
2020-01-21 12:23     ` [EXT] " Shivamurthy Shastri (sshivamurthy)
2020-01-21 13:40       ` Miquel Raynal
2020-01-21 14:59         ` Shivamurthy Shastri (sshivamurthy)
2020-01-21 15:27           ` Miquel Raynal
2020-01-23  9:01             ` Shivamurthy Shastri (sshivamurthy)
2020-01-19 14:54 ` [PATCH 4/4] mtd: spinand: Add new Micron SPI NAND devices with multiple dies shiva.linuxworks
2020-01-20 10:22   ` Miquel Raynal
2020-01-21 12:23     ` [EXT] " Shivamurthy Shastri (sshivamurthy)
2020-01-21 13:44       ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200120111626.7cb2f6c5@xps13 \
    --to=miquel.raynal@bootlin.com \
    --cc=bbrezillon@kernel.org \
    --cc=frieder.schrempf@kontron.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=shiva.linuxworks@gmail.com \
    --cc=sshivamurthy@micron.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).